How to choose the correct body armor for your TJ.

How to choose the correct body armor for your TJ.
Motobilt has just released several new body armor pieces such as rocker guards and corner guards. We hope the following information will help you to choose the right armor for your Jeep. If you have any questions you can email us at info@motobilt.com or call us at 334-219-2333

JEEP TJ ROCKER GUARDS WITH STOCK FLARES (MB1059)

If you have stock fender flares or aftermarket flares that mount in the same location then these are the flares for you. We do offer these with a tube step option but you will need to call us as of now at 334-219-2333

JEEP TJ FULL LENGTH ROCKER GUARDS (MB1056)

These rocker guards start at the front fender flare but extend all the way to the wheel well opening on the rear. So these would not work with the stock rear fender flares. Instead these would work well with our Jeep TJ Factory cut rocker guards (MB1055) or they could be used with our blank corner guards (MB1057) MB1055 corners shown. Available with optional tube step by calling 334-219-2333

JEEP TJ FACTORY CUT CORNER GUARDS (MB1055)

These corners are suited for those who want to keep the factory look of of their stock Jeep setup. These corners work best with the Motobilt full length rocker guards (MB1056)

JEEP TJ BLANK CORNERS (MB1057)

These corners are blank so that you can modify them to your exact specifications. They work best with the Motobilt full length rockers (MB1056)

JEEP TJ ROCKER GUARDS FOR COMP AND STRETCH CUT CORNERS (MB1054)

These rocker guards start at the very front edge of the wheel well opening and extend past the rear wheel. These are designed to be used with the competition cut corners (MB1051) or the stretch cut corners (MB1058) Available with option tube step by calling 334-219-2333 MB1058 shown

JEEP TJ 4" STRETCH CUT CORNERS (MB1058)

These corner guards move the wheel well opening back approximately 4"s while maintaining a proportional look. The rocker guards that would fit these corners are the (MB1054)

JEEP TJ COMPETITION CUT CORNERS (MB1051)

The competition cut corners allow you to stretch your wheel base as far as possible. These corners are best suited for the (MB1054) rocker guards.

Leave a comment

Please note, comments must be approved before they are published