Products

The Motobilt 13 bolt diff cover allows for an extra 1.25 inch of ground clearance on your GM 14 bolt rear axle. This is often referred to as a shaved cover as you cut/shave 1.25 inch off of the bottom of the axle. The ring of this cover is laser...
We have bundled together all of the parts necessary to swap in a GM 14 bolt rear axle using leaf springs.  The 8mm bolts and fill plug ship with the cover.  Included: 14 Bolt Full Float Diff Cover with Metric Hardware  14 Bolt U-Bolt Eliminator Kit 14 bolt pinion guard 14...
The Motobilt Competion Axle Truss is the ultimate in strength. It is basically a truss within a truss. Added strength is needed in larger tire applications for rock crawling, rock bouncing, and those who like to push it. Motobilt has been fabricating the 14 Bolt Competition Axle Truss since 2013....
Motobilt 14 Bolt Axle Truss Trail Version is a heavy duty truss for those wanting to mount suspension links to the top of the housing and eliminate the chance of spinning axle tubes in the center section. The 14 Bolt Axle has become a go to axle for rock crawlers...
The Motobilt 14 Bolt Diff Cover was designed with function in mind. The cover is made from high strength steel plate and full welded. The Motobilt GM 14 bolt full float heavy duty steel diff cover has many features that separate it from others. The GM 14 bolt full float...
The Motobilt GM 14 bolt full float rear disc brake brackets are a bolt on design. The Motobilt MB4022 disc brake brackets are a bolt on design for the GM Full Float rear axle. The brackets are CNC laser out out of 3/8" thick steel plate. Brackets have multiple holes...
The Motobilt lower axle link brackets are laser cut 3/8" steel plate. The mounts are designed to fit the GM 14 bolt axle housing tubes. They are offset to allow the rod end and to achieve maximum articulation. They are made with a 3/4 inch bolt hole. They can be used...
The Motobilt 4 link axle tabs are laser cut out of 3/8" steel plate. These brackets are built with pure strength in mind! We offer these brackets for just about every axle and link combination out there. In the case of the Motobilt 4 link axle tabs we thought of...
These Motobilt spring perches are made out of 1/4 inch thick steel plate that is and then CNC laser cut and formed. The length of the perches is 7 inch to help with axle wrap while the width is 2.5 inch. The Motobilt spring perches are cut to fit a...
The Motobilt Bump Stop Pad is designed for 3” axel tubes.  The bump stop pad can easily be modified with slight grinding to fit larger diameter axle tubes if the DIY fabricator or professional installer needs to fit it. The bump stop pads are laser cut and CNC formed in...
If you can weld and want to build your own diff cover, purchase the 13 Bolt DIY DIFF Cover. Motobilt DIY Diff Covers are the same as our fully-welded diff covers, but sold as a kit including the pre-formed pieces and hardware you will need to complete the DIY project yourself. We have...
If you can weld and want to build your own diff cover, purchase the 14 Bolt DIY DIFF Cover. Motobilt DIY Diff Covers are the same as our fully-welded diff covers, but sold as a kit including the pre-formed pieces and hardware you will need to complete the DIY project...
Spinner