Products

The Motobilt 13 bolt diff cover allows for an extra 1.25 inch of ground clearance on your GM 14 bolt rear axle. This is often referred to as a shaved cover as you cut/shave 1.25 inch off of the bottom of the axle. The ring of this cover is laser...
The Motobilt Competion Axle Truss is the ultimate in strength. It is basically a truss within a truss. Added strength is needed in larger tire applications for rock crawling, rock bouncing, and those who like to push it. Motobilt has been fabricating the 14 Bolt Competition Axle Truss since 2013....
Motobilt 14 Bolt Axle Truss Trail Version is a heavy duty truss for those wanting to mount suspension links to the top of the housing and eliminate the chance of spinning axle tubes in the center section. The 14 Bolt Axle has become a go to axle for rock crawlers...
The Motobilt GM 14 bolt full float rear disc brake brackets are a bolt on design. The Motobilt MB4022 disc brake brackets are a bolt on design for the GM Full Float rear axle. The brackets are CNC laser out out of 3/8" thick steel plate. Brackets have multiple holes...
The Motobilt GM 14 bolt heavy duty pinion guard is laser cut from 3/8 inch thick steel plate. Not only is the guard 3/8 inch thick but so is the ring that bolts to the pinion support also. The guard is cnc bent and welded by hand right here in...
The Motobilt lower axle link brackets are laser cut 3/8" steel plate. The mounts are designed to fit the GM 14 bolt axle housing tubes. They are offset to allow the rod end and to achieve maximum articulation. They are made with a 3/4 inch bolt hole. They can be used...
The Motobilt Jeep JK rear 1 ton axle swap with pinion guard makes installing a beefy rear axle in your Jeep a breeze. When designing our kit we wanted it to be easy to install. Whether you are a professional shop, or a DIY fabricator at home, this kit will...
1/2" diameter tab on sale for 40% off for a limited time only! The Motobilt 4 link axle tabs are laser cut out of 3/8" thick steel plate. These brackets are built with pure strength in mind! We offer these brackets for just about every axle and link combination out...
The 78-79 Dana 60 truss from Motobilt will greatly increase the strength of your front axle. The main structure of this axle truss is laser cut and cnc bent from 3/8 inch thick steel plate. Supporting the main truss are 3/8 inch and 3/16 inch structural bracing. The top portion...
Diff Cover to fit AAM 11.5" Rear Axle The Motobilt AAM 11.5 HD steel diff cover has many features that separate it from others. The AAM 11.5 HD steel diff cover features a 3/8 inch thick laser cut steel ring that will keep the cover from pulling away from the housing...
The Motobilt JK Cam Delete Plates allow you to eliminate the slotted factory holes that use a cam bolt.  If your running aftermarket adjustable arms you do not need cam bolts and you can eliminate the weak slots.  These plates come in a set of 4 which allows you to...
Chevy full width Dana 60 Axle Truss System with integrated double ended steering ram mount. The Motobilt Chevy Dana 60 axle truss is laser cut and bent out of 3/8 inch high strength steel for the main structure. The truss spans the length of the axle, and is included in...
Spinner