Products

The Motobilt lower axle link brackets are laser cut 3/8" steel plate. The mounts are designed to fit the GM 14 bolt axle housing tubes. They are offset to allow the rod end and to achieve maximum articulation. They are made with a 3/4 inch bolt hole. They can be used...
Motobilt's CNC cut from 14ga high strength steel. Hole diameter is 3/8 inch. 14ga tab 3/8 inch Hole the 3/8' hole is perfect for rivnuts CNC cut Sold as each Note: Select one or two inch tall tab Can be used for mounting many different applications
The Motobilt 2 bolt Flange is sold individually.  The 2 bolt flange is laser cut from 3/16" high strength steel plate.  The bolt hole diameter is 3/8".  The center hole is available in 1.25", 1.50" and 1.75". The tabs are shipped bare steel. Choose the size before checking out.EXAMPLE OF...
The 4 bolt flange can be used for many things. The primary use is the make a section of tube removable. The flanges are also used for connecting tube through a firewall or other sheetmetal. The Motobilt 4 bolt tube flange is CNC laser cut from 3/16 inch high strength...
The Motobilt 4 link axle tabs are laser cut out of 3/8" inch thick P and O steel plate. These brackets are built with pure strength in mind! We offer these brackets for just about every axle and link combination out there. In the case of the Motobilt 4 link...
The Motobilt 4 link axle tabs are laser cut 3/8" thick steel plate. These brackets are built with pure strength in mind! We offer these brackets for just about every axle and link combination out there. In the case of the Motobilt 4 link axle tabs we thought of everything!...
The Motobilt 4 link axle tabs are laser cut out of 3/8" thick steel plate. These brackets are built with pure strength in mind! We offer these brackets for just about every axle and link combination out there. In the case of the Motobilt 4 link axle tabs we thought...
The Motobilt 4 link axle tabs are laser cut out of 3/8" thick steel plate. These brackets are built with pure strength in mind! We offer these brackets for just about every axle and link combination out there. In the case of the Motobilt 4 link axle tabs we thought...
The Motobilt 4 link axle tabs are laser cut out of 3/8" steel plate. These brackets are built with pure strength in mind! We offer these brackets for just about every axle and link combination out there. In the case of the Motobilt 4 link axle tabs we thought of...
The Motobilt Flat Bottom 4 Link Tab is CAD designed and CNC laser cut from high strength steel 3/8" plate. The tab cab be used to mount a number of different suspension link configurations. We commonly use this tab in combination with axle trusses.Features: 4 link Tab with a flat mounting surface...
The Motobilt Boomerang Shackle plates are sold as a pair.  They measure 4"s long from the center of hole to center of hole. The hole diameter is 1/2" for all three holes.  Specifications 3/8" thick laser cut steel plate Sold as pair Note Ships raw steel
The 90 degree weld on d-ring mount measures 3.75 inch on the long flat base and 1.75 inch on the shorter base. The d-ring mount is CNC Laser Cut from 3/4 inch thick high strength steel plate. The through hole is 1 inch. The part requires welding to install. The...
Spinner