Products

The Motobilt lower coil over mounts for the side of the axle are built to take some serious abuse. These mounts have a set of built in spacers that will work with 2 inch coilovers. The brackets come as a pair and will need to be welded together for install....
The Motobilt rear fender top mounted coil over mounts are integrated into the CJ/YJ rear fender tops. The mounts allow you to run a rear coilover that will tie into the fender tops and the roll cage. These mounts come with the roll cage upper mounting plate so that you...
The Coilover shock tab for 1.75 inch round tube is cnc laser cut from 1/4 inch high strength steel plate. The bolt hole is 1/2 inch diameter to fit the standard coilover shock bolt size. The area around the bolt hole has clearance to allow room for the shock body...
Dana 44 Inner C Coilover tabs. The tabs are CNC cut from 1/4 inch high strength steel plate. The will work perfectly with most Dana 44 front axles including Chevy, Ford, Jeep. Mounting a coilover to a Dana 44 front axle is made easy with these tabs. The tabs are...
Coilover mounting tab for Dana 60 front kingpin style axle housings. Mounting coilover shocks to a Dana 60 front kingpin style axle has a couple challenges and the Motobilt MB2006 tab answers them. The tab is contoured on the bottom edge (weld surface) to follow the axle tube and contour...
Dynatrac Pro Rock 60 front coilover tabs. This tab was specifically designed for the Dynatrac axle.  It is laser cut 1/4" high stretch steel plate.  The bolt hole diameter is 1/2". Sold as each
The Motobilt Flat Mounting Coilover Tab can be used in a number of applications. The tab is CNC laser cut from 1/4 inch high strength steel plate. The tab measures 2 inch wide at the flat bottom base. The 1/2 inch hole is 1.5 inch up from the flat bottom...
The Motobilt Flat Mounting Coilover Tab can be used in a number of applications. The tab is CNC laser cut from 1/4 inch high strength steel plate. The tab measures 3.25 inch wide at the flat bottom base; The 1/2 inch hole is 1.5 inch up from the flat bottom...
The Motobilt lower coilover bracket kit is designed for any axle with a tube diameter up to 3.5 inch. We laser cut the brackets in house at Motobilt HQ from 1/4 inch thick steel plate.. The mounting hole is 1/2 inch but can easily be drilled to a larger diameter....
Shock Tower Coilover Tab for 6 inch Center Line Radius bent tube shock tower. In-house laser cut out of 1/4 inch high strength steel. Laser cut out of 1/4 inch high strength steel Sold as each
The Super Duty Dana 60 inner C coil over shock bracket set is manufactured from laser cut and formed 1/4" steel plate. The inner C shock mounts are designed for 2.0 coil over shocks. The shock mounts fit the 2005+ Dana 60 Super Duty Axle inner C.. Simply bolt on to...
The Motobilt square cut shock tabs are laser cut out of 1/4 inch thick steel plate. They feature a 1/2 inch mounting hole and have a 90 degree cut out to fit square tubing. These have tons of uses such as shock mounts, cross member mounts, and much more. Square...
Spinner