Products

The Motobilt rear fender top mounted coil over mounts are integrated into the CJ/YJ rear fender tops. The mounts allow you to run a rear coilover that will tie into the fender tops and the roll cage. These mounts come with the roll cage upper mounting plate so that you...
The Motobilt coilover shock hoop kit is made of HD 1.75 inch DOM Tubing. This kit is the perfect way to mount coilovers, air shocks, etc. Shock hoop kit HD 1.75 inch DOM Tubing Sold as kit Must select lower mount type ( Flat bottom , King pin dana 60 or...
The Motobilt Coilover Shock Hoops are made of HD 1.75 inch .120wall DOM Tubing. They are the perfect way to mount coilovers, air shocks, etc. This kit is designed to be used with the Motobilt Coilover Shock Hoop Brace (#MB1557) but can be used separately.  Its larger opening also works...
Product Details The Motobilt shock towers are made out of thick 1/4 inch p and o steel plate that is CNC cut and bent. These towers have a notch cut into them so that you can sit them on top of your frame rail and weld them in place. The lean...
The Coilover shock tab for 1.75 inch round tube is cnc laser cut from 1/4 inch high strength steel plate. The bolt hole is 1/2 inch diameter to fit the standard coilover shock bolt size. The area around the bolt hole has clearance to allow room for the shock body...
Dana 44 Inner C Coilover tabs. The tabs are CNC cut from 1/4 inch high strength steel plate. The will work perfectly with most Dana 44 front axles including Chevy, Ford, Jeep. Mounting a coilover to a Dana 44 front axle is made easy with these tabs. The tabs are...
Coilover mounting tab for Dana 60 front kingpin style axle housings. Mounting coilover shocks to a Dana 60 front kingpin style axle has a couple challenges and the Motobilt MB2006 tab answers them. The tab is contoured on the bottom edge (weld surface) to follow the axle tube and contour...
The Motobilt MB1546 Dual Rear Shock Towers were designed & developed as a dual rear shock mount solution to be used in conjunction with our MB3025 Jeep JK Back Half Kit. These rear shock towers can also be used as a solution for other custom builder projects where a dual...
Dynatrac Pro Rock 60 front coilover tabs. This tab was specifically designed for the Dynatrac axle.  It is laser cut 1/4" high stretch steel plate.  The bolt hole diameter is 1/2". Sold as each
The Motobilt Flat Mounting Coilover Tab can be used in a number of applications. The tab is CNC laser cut from 1/4 inch high strength steel plate. The tab measures 2 inch wide at the flat bottom base. The 1/2 inch hole is 1.5 inch up from the flat bottom...
The Motobilt Flat Mounting Coilover Tab can be used in a number of applications. The tab is CNC laser cut from 1/4 inch high strength steel plate. The tab measures 3.25 inch wide at the flat bottom base; The 1/2 inch hole is 1.5 inch up from the flat bottom...
The Motobilt Jeep YJ front shock towers are laser cut from 3/16 inch steel plate and cnc bent in house at Motobilt. These are 100 percent made in America. The Motobilt towers are meant to replace the stock shock buckets on your 1987-1995 Jeep Wrangler YJ. The towers come as...
Spinner