{"title":"Dana 60 \/ 70 Axle","description":"\u003cp\u003eIf you are a rock crawling or offroad fan more than likely you know what a Dana 60 axle is or have heard your offroading friends talk about the famous Dana 60.  The Dana 60 is one of the most commonly used front axle assemblies when doing a one ton axle conversion in a Jeep or choosing axles for a custom offroad vehicle. The Dana 60 front and rear axle are offered in a varity of vehicle makes, models and years.  The front Dana 60 is more sought after than the rear Dana 60.  Ford, Chevy and the Dodge Ram have all used the Dana 60.  Another term to understand is \"full width axle conversion\".  Often times when you hear someone say they are going full width one ton in their Jeep, Toyota or tube buggy they are referring to using a Dana 60 front axle and not cutting it down.  Full width basically means you find a donor truck like a 1979 Ford F250 or F350 and use the axle assembly at the same width it was removed from the truck.  Check out all of the products we offer for the Dana 60. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","products":[{"product_id":"dana-60-diff-cover","title":"Dana 60 Diff Cover","description":"\u003c!--[difficulty:1]--\u003e\r\n\u003cp\u003eThe Motobilt Dana 60\/70 HD steel diff cover has many features that separate it from others. The Dana 60 \/ 70 HD steel diff cover features a 3\/8 inch thick laser cut steel ring that will keep the cover from pulling away from the housing when dragging over rocks. The Dana 60 \/ 70 HD steel diff cover also features the proven 1\/4 inch thick CNC formed steel plate design with an integrated 3\/4 inch NPT fill plug. The fill plug on the Dana 60 HD steel diff cover allows for easy access, especially when a truss system is commonly used. The Dana 60 \/ 70 HD steel diff cover is welded both on the inside and outside of the cover to ensure maximum penetration for superior strength. The Dana 60 \/ 70 HD steel diff cover's design comes from over 14 years of diff cover testing and manufacturing experience. The diff cover ships bare steel and will need to be painted. We do not usually powder coat ours because the diff cover is going to take abuse from rocks. Spray paint works well so you can simply touch it up. The bolts and fill plug ship with the cover.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDana 60 HD steel diff cover-also fits Dana 70\u003c\/li\u003e\r\n\u003cli\u003e3\/8 inch thick laser cut steel ring\u003c\/li\u003e\r\n\u003cli\u003e1\/4 inch thick CNC formed steel plate\u003c\/li\u003e\r\n\u003cli\u003eIntegrated 3\/4 inch NPT fill plug\u003c\/li\u003e\r\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\r\n\u003cli\u003eSold as each\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight = 13lbs\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThis cover will Not work on 2005 and newer Ford super duty with factory steering. Use PN \u003ca href=\"\/products\/super-duty-dana-60-diff-cover\" target=\"_blank\"\u003eMB4043\u003c\/a\u003e instead\u003c\/li\u003e\r\n\u003cli\u003eShips bare steel will need to be painted\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e9\/16 allen head - For the fill plug.\u003c\/li\u003e\r\n\u003cli\u003e12 point 3\/8 socket and ratchet\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/Diff_Cover_Install_Instructions_214439d1-b7f1-4b6f-bd54-b02c217ca01b.pdf?v=1646149610\" class=\"btn\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32072358461524,"sku":"MB4010","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/image_a9bb46ed-0063-491c-8927-30e1e3a974a0.jpg?v=1614201899"},{"product_id":"u-bolt-eliminator-kit-for-14-bolt-dana-70-sterling-10-25-5","title":"U-Bolt Eliminator Kit for 14 Bolt, Dana 70 \u0026 Sterling 10.25\/5","description":"\u003cp\u003eThe Motobilt u-bolt eliminator kit allows you to replace the 4 factory u-bolts with conventional bolts. The u-bolt eliminator kit was designed for serious rock crawlers that want the ultimate clearance underneath their vehicle. The kit is designed to work with 2.5 inch wide leaf springs found on vehicles like the Jeep YJ, XJ, and more. The u-bolt eliminator kit has 3 leaf center pin locations in the spring perch and top bolt plate which allows you to move the axle forward or reward in 1 inch increments. The top plate is made of 3\/8 inch thick high strength steel plate bent on the ends for increased structural rigidity and eliminate sharp edges on the leaf spring. The 1\/4 inch thick high strength steel plate spring perch has 3 sections to weld to your axle for superior strength. The Motobilt u-bolt eliminator kit is designed for axles with a tube diameter of 3.25 inch-3.5 inch which fits well with the GM 14 bolt, Dana 70, and Sterling rear axles. Hardware not included as the thickness of leaf spring packs will vary depending on each setup. This kit is intended to be used with 5\/8 inch grade 8 bolts and nylock nuts.The kit is shipped with two fabricated lower spring perches and two upper bolt plates.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eU-bolt eliminator kit\u003c\/li\u003e\r\n\u003cli\u003eDesigned for axles with a tube diameter of 3.25 inch-3.5 inch which fits well with the GM 10.5 Inch 14 bolt, Dana 70, and Sterling rear axles\u003c\/li\u003e\r\n\u003cli\u003eTop plate is made of 3\/8 inch thick high strength steel plate\u003c\/li\u003e\r\n\u003cli\u003e1\/4 inch thick high strength steel plate spring perch\u003c\/li\u003e\r\n\u003cli\u003eDesigned to work with 2.5 inch wide leaf springs\u003c\/li\u003e\r\n\u003cli\u003eThis kit is intended to be used with 5\/8 inch grade 8 bolts and nylock nuts\u003c\/li\u003e\r\n\u003cli\u003e3 leaf center pin locations\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eShipped with two fabricated lower spring perches and two upper bolt plates\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb4026-12_1800x1800_86ef09a3-2efd-479d-88e9-a6c11b4caa00.jpg?v=1651087387\" target=\"_blank\" rel=\"noopener noreferrer\" class=\"btn\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32087588208724,"sku":"MB4026","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb4026-12.jpg?v=1587754997"},{"product_id":"drill-guide-8-on-6-5-to-sd60","title":"Drill Guide 8 on 6.5 to SD60","description":"\u003cp\u003e\u003cspan\u003eThis handy drilling guide is used to mark the hole centers when converting the wheel stub bolt pattern on a Chevy Dana 60 front axle wheel hubs from 8 bolt on 6.5” to 8 bolt on 170mm bolt circle diameter.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eSimply place the drilling guide over the stock wheel studs, then use the small holes \u0026amp; a punch to mark the exact centers of the new 8 bolt on 170mm b.c.d.   Drill your wheel hubs to your new desired wheel stud size \u0026amp; press into the wheel hub.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eNo guessing!  Ensure your new wheel stud pattern is concentric to the wheel hub.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003e1\/8\" thick.   Weight = 0.5 lbs\u003c\/span\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32088259887188,"sku":"MB4086","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB4086D60toSD60DrillguideView1.jpg?v=1587754465"},{"product_id":"drill-guide-sd60-to-8-on-6-5","title":"Drill Guide SD60 to 8 on 6.5","description":"\u003cp\u003e\u003cspan\u003eThis handy drilling guide is used to mark the hole centers when converting the wheel stub bolt pattern on a Ford Super Duty front axle wheel hubs from 8 bolt on 170mm to 8 bolt on 6.5” bolt circle diameter.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eSimply place the drilling guide over the stock wheel studs, then use the small holes \u0026amp; a punch to mark the exact centers of the new 8 bolt on 6.5” b.c.d.   Drill your wheel hubs to your new desired wheel stud size \u0026amp; press into the wheel hub.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eNo guessing!  Ensure your new wheel stud pattern is concentric to the wheel hub.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003e1\/8\" thick \u003c\/span\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32088266965076,"sku":"MB4085","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB4085SD60DrillGuide.jpg?v=1587754466"},{"product_id":"ford-dana-60-axle-truss-and-steering-mount-78-79-f-350","title":"Ford Dana 60 Front Axle Truss w\/ Steering Ram Mount 78-79","description":"\u003cp\u003eThe Motobilt Ford Dana 60 early king pin axle truss is laser cut and bent out of 3\/8 inch high strength steel for the main structure. This kit was designed specifically for the 1978 to 1979 Ford King Pin dana 60 found in 250\/350's. The truss spans the length of the axle, and includes in an integrated hydraulic ram mount for full hydraulic steering. The design is meant for a 2.5 inch-2.75 inch double ended ram. The ram is completely protected from underneath with a full skid plate to keep it safe from rocks.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThis new kit consists of a full length axle truss and integrated steering ram mount. The main truss is made from massive 3\/8 inch thick steel plate that is both laser cut and CNC bent for a precise fit. There is significant bracing internally with the use of 3\/8 inch and 3\/16 inch thick mounts.\u003c\/li\u003e\r\n\u003cli\u003eNot only is your axle going to have superior strength it will also have a high clearance mount to protect your 2.5-2.75 inch double ended steering ram. This mount allows you to tuck the ram up out of harms way and is completely protected with 1\/4 inch thick cnc bent steel plate.\u003c\/li\u003e\r\n\u003cli\u003eOn top connecting the truss to the front of the steering ram mount is a bracket that provides extra strength and serves as a winch suck down point. A small d ring shackle can be mounted here so that you can attach your winch to it when attempting those extreme climbs. Once you attach and pull the winch tight you decrease your chances of the rig unloading on those steep ledges.\u003c\/li\u003e\r\n\u003cli\u003eAnother awesome option provided are the 2 holes on each end of the truss. These holes can also act as points for a small d ring to be attached.\u003c\/li\u003e\r\n\u003cli\u003eWhen designing the steering ram mount we paid special attention to make sure that the ram was placed optimally to work with correctly with after market steering arms.\u003c\/li\u003e\r\n\u003cli\u003eA removable skid plate around the differential cover allows for full accessibility to work on your differential.\u003c\/li\u003e\r\n\u003cli\u003eThe entire system is designed with keyway fitments to ensure a true and straight forward install.\u003c\/li\u003e\r\n\u003cli\u003eWe have additional mounts for coil overs, link tabs, and hydraulic steering rams available for purchase separately and are not included with this kit.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eProfessional welding is required to install this system properly.\u003c\/li\u003e\r\n\u003cli\u003eWeight: 80lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eSuggested Parts:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003ca href=\"https:\/\/motobilt.com\/products\/upper-link-mount-front-axle\" rel=\"noopener\" target=\"_blank\"\u003eMB1568\u003c\/a\u003e - Universal Upper Triangulated Link Mount - Front Axle\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/dana-60-lower-link-mount-kit-for-4-link-system\" target=\"_blank\"\u003eMB4006\u003c\/a\u003e - Dana 60 Angled Lower Link Mount Kit\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/dana-60-diff-cover?variant=32072358461524\" target=\"_blank\"\u003eMB4010\u003c\/a\u003e - Dana 60 Heavy Duty Diff Cover\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb4071_-_shipping.pdf?v=1660770107\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eAxle Truss Prep\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" rel=\"noopener noreferrer\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/SD60_Truss_Preperation_Instructions.pdf?v=1617719353\" target=\"_blank\"\u003eAxle Truss Prep\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32093276897364,"sku":"MB4071","price":529.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/4071_-_ford_kingpin_full_hydro_-_2_37053.jpg?v=1587754479"},{"product_id":"78-79-ford-dana-60-axle-truss","title":"78-79 Ford Dana 60 Axle Truss","description":"\u003cp\u003eThe 78-79 Dana 60 truss from Motobilt will greatly increase the strength of your front axle. The main structure of this axle truss is laser cut and cnc bent from 3\/8 inch thick steel plate. Supporting the main truss are 3\/8 inch and 3\/16 inch structural bracing. The top portion of the truss is approximately 5.5 inches wide and provides ample room for a suspension link mount to be welded onto it. This axle truss can be used for a 3 or 4 link setup.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\r\n\u003cli\u003eThickness: 3\/8 Inch\u003c\/li\u003e\r\n\u003cli\u003e3\/8 inch thick laser cut steel plate main truss\u003c\/li\u003e\r\n\u003cli\u003e3\/8 inch and 3\/16 inch steel plate support structure\u003c\/li\u003e\r\n\u003cli\u003eFull length span of axle for increased strength\u003c\/li\u003e\r\n\u003cli\u003eLarge flat mounting surface for link brackets\u003c\/li\u003e\r\n\u003cli\u003eWeight: 55lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eSuggested Parts:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003ca href=\"https:\/\/motobilt.com\/products\/upper-link-mount-front-axle\" rel=\"noopener\" target=\"_blank\"\u003eMB1568\u003c\/a\u003e - Universal Upper Triangulated Link Mount - Front Axle\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/dana-60-lower-link-mount-kit-for-4-link-system\" target=\"_blank\"\u003eMB4006\u003c\/a\u003e - Dana 60 Angled Lower Link Mount Kit\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/dana-60-diff-cover?variant=32072358461524\" target=\"_blank\"\u003eMB4010\u003c\/a\u003e - Dana 60 Heavy Duty Diff Cover\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/adjustable-track-bar-bracket-steel\" target=\"_blank\"\u003eMB1542\u003c\/a\u003e-  Track Bar Bracket\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb4070_-_shipping.pdf?v=1660770212\" rel=\"noopener noreferrer\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eAxle Truss Prep\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" rel=\"noopener noreferrer\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/SD60_Truss_Preperation_Instructions.pdf?v=1617719353\" target=\"_blank\"\u003eAxle Truss Prep\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32093328408660,"sku":"MB4070","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB4070-view-2.jpg?v=1587754395"},{"product_id":"jeep-yj-full-width-axle-conversion-kit-w-stinger","title":"Full Width Axle Conversion Kit w\/ Stinger for Jeep YJ","description":"\u003cp\u003eThe Motobilt Jeep YJ full width axle conversion kit is a simple way to install a Chevy Dana 44 or Dana 60 front axle in your Jeep YJ. This kit also works with older model Ford 44 and 60 fronts from the 78\/79 range. \u003cspan\u003eThe measurement from center pin to center pin on your front axle needs to be between \u003cstrong\u003e31 1\/2 inches to 32 inches\u003c\/strong\u003e in order to work.  \u003c\/span\u003eThis kit fits Jeep YJ's from 1987 to 1995. Motobilt offers high quality fabricated parts for the DIY fabricator. This kit is Not a bolt on product. It requires welding to install. The Motobilt Jeep YJ full width axle conversion kit was designed for ultimate strength and to make your Jeep look great at the same time.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eDoes NOT work with Ford Super Duty Axles as the mounting pads for the leaf spring pads is too wide. Will NOT fit 1980 or newer Ford axles.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe kit features a removable winch plate, stubby front bumper assembly, 3\/4 inch d-ring mounts that pass through the bumper and welded on both sides, a shackle reversal spring buckets, shackle bushing tubes for the frame, and 4 inch long offset shackles. The kit moves the front axle forward as much as possible without relocating the steering box. The kit is designed to work with Jeep YJ leafs springs. The front bumper features a built in bottle opener on the bottom side.\u003c\/p\u003e\r\n\u003cp\u003eThe kit will ship with a jig to drill through the frame to locate the rear shackle hangers. This kit was designed to keep the ride height as low as possible. The rear shackle bushings will be located mid way through the frame rail. The bumper, and winch plate are fabricated from 3\/16 inch high strength steel plate. The side frame plate, spring buckets, and shackles are fabricated from 1\/4 inch high strength steel plate. The included d-ring mounts are fabricated from 3\/4 inch thick high strength steel plate.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep YJ full width axle conversion kit to install Chevy Dana 44 or Dana 60 front axle with Stinger\u003c\/li\u003e\r\n\u003cli\u003e1987-1995 Jeep YJ\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003ePotential Donor Axles Below:\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003cli\u003e1978-1979 Ford 44 and 60 fronts\u003c\/li\u003e\r\n\u003cli\u003e1973-1991 Chevy Dana 44, GM 10 bolt, or Dana 60\u003c\/li\u003e\r\n\u003cli\u003eBumper and winch plate 3\/16 inch high strength steel plate\u003c\/li\u003e\r\n\u003cli\u003eremovable winch plate\u003c\/li\u003e\r\n\u003cli\u003estubby front bumper assembly\u003c\/li\u003e\r\n\u003cli\u003eSide frame plate-spring buckets-shackles fabricated from 1\/4 inch high strength steel plate\u003c\/li\u003e\r\n\u003cli\u003e3\/4 inch d-ring mounts that pass through the bumper and welded on both sides\u003c\/li\u003e\r\n\u003cli\u003eshackle reversal spring buckets\u003c\/li\u003e\r\n\u003cli\u003eshackle bushing tubes for the frame\u003c\/li\u003e\r\n\u003cli\u003e4 inch long shackles\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003cli\u003eWeight: 75lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThis kit is Not a bolt on product. Welding required to install.\u003c\/li\u003e\r\n\u003cli\u003eHardware not included.\u003c\/li\u003e\r\n\u003cli\u003eShackle bushing kit sold separately PN BushingKit. Only 1 kit is needed.\u003c\/li\u003e\r\n\u003cli\u003eThis kit does not include leaf springs, u-bolts, u-bolt plates, shocks, shock mounts, poly bushings and longer brake lines. \u003cspan\u003eMotobilt offers the bushing kit and shock mounts separately.\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eThe front bumper features a built in bottle opener on the bottom side\u003c\/li\u003e\r\n\u003cli\u003eThe kit will ship with a jig to drill through the frame to locate the rear shackle hangers\u003c\/li\u003e\r\n\u003cli\u003eFront axle is moved forward approximately 2 inches. \u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eGuide to choosing the correct parts:\u003c\/h3\u003e\r\n\u003cp\u003e\u003ca href=\"How%20to%20Pair%20Our%20Full-Width%20Axle%20Conversion%20Kits%20with%20Stretch%20Kits%20on%20Your%20CJ%20or%20YJ\"\u003eCheck out this article to help you match your springs and rear stretch kit. \u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1502_INSTALL_0.pdf?v=1588274704\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32093393322068,"sku":"MB1502-S","price":789.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB1502-S-new.jpg?v=1626474196"},{"product_id":"jeep-yj-full-width-axle-conversion-kit","title":"Full Width Axle Conversion Kit for Jeep YJ","description":"\u003cp\u003eThe Motobilt Jeep YJ full width axle conversion kit is a simple way to install a Chevy Dana 44 or Dana 60 front axle in your Jeep YJ. This kit also works with older model Ford 44 and 60 fronts from the 78\/79 range. \u003cspan\u003eThe measurement from center pin to center pin on your front axle needs to be between \u003cstrong\u003e31 1\/2 inches to 32 inches\u003c\/strong\u003e. This\u003c\/span\u003e kit fits Jeep YJ's from 1987 to 1995. Motobilt offers high quality fabricated parts for the DIY fabricator. This kit is Not a bolt on product. It requires welding to install. The Motobilt Jeep YJ full width axle conversion kit was designed for ultimate strength and to make your Jeep look great at the same time.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eDoes NOT work with ford Super Duty Axles as the mounting width for the leaf spring pads is too wide. Any Ford axles from 1980 or Newer will NOT fit.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe kit features a removable winch plate, stubby front bumper assembly, 3\/4 inch d-ring mounts that pass through the bumper and welded on both sides, a shackle reversal spring buckets, shackle bushing tubes for the frame, and 4 inch long offset shackles. The kit moves the front axle forward as much as possible without relocating the steering box. The kit is designed to work with Jeep YJ leafs springs. The front bumper features a built in bottle opener on the bottom side.\u003c\/p\u003e\r\n\u003cp\u003eThe kit will ship with a jig to drill through the frame to locate the rear shackle hangers. This kit was designed to keep the ride height as low as possible. The rear shackle bushings will be located mid way through the frame rail. The bumper, and winch plate are fabricated from 3\/16 inch high strength steel plate. The side frame plate, spring buckets, and shackles are fabricated from 1\/4 inch high strength steel plate. The included d-ring mounts are fabricated from 3\/4 inch thick high strength steel plate.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep YJ full width axle conversion kit to install Chevy Dana 44 or Dana 60 front axle\u003c\/li\u003e\r\n\u003cli\u003e1987-1995 Jeep YJ\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003ePotential Donor Axles Below:\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003cli\u003e1978-1979 Ford 44 and 60 fronts\u003c\/li\u003e\r\n\u003cli\u003e1973-1991 Chevy Dana 44, GM 10 bolt, or Dana 60\u003c\/li\u003e\r\n\u003cli\u003eBumper and winch plate 3\/16 inch high strength steel plate\u003c\/li\u003e\r\n\u003cli\u003eremovable winch plate\u003c\/li\u003e\r\n\u003cli\u003estubby front bumper assembly\u003c\/li\u003e\r\n\u003cli\u003eSide frame plate-spring buckets-shackles fabricated from 1\/4 inch high strength steel plate\u003c\/li\u003e\r\n\u003cli\u003e3\/4 inch d-ring mounts that pass through the bumper and welded on both sides\u003c\/li\u003e\r\n\u003cli\u003eshackle reversal spring buckets\u003c\/li\u003e\r\n\u003cli\u003eshackle bushing tubes for the frame\u003c\/li\u003e\r\n\u003cli\u003e4 inch long shackles\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003cli\u003eWeight: 56lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThis kit is Not a bolt on product. Welding required to install.\u003c\/li\u003e\r\n\u003cli\u003eHardware not included.\u003c\/li\u003e\r\n\u003cli\u003eShackle bushing kit sold separately PN BushingKit. Only 1 kit is needed.\u003c\/li\u003e\r\n\u003cli\u003eThis kit does not include leaf springs, u-bolts, u-bolt plates, shocks, shock mounts, poly bushings and longer brake lines. Motobilt offers the bushing kit and shock mounts separately.\u003c\/li\u003e\r\n\u003cli\u003eThe front bumper features a built in bottle opener on the bottom side\u003c\/li\u003e\r\n\u003cli\u003eThe kit will ship with a jig to drill through the frame to locate the rear shackle hangers\u003c\/li\u003e\r\n\u003cli\u003eFront axle is moved forward approximately 2 inches. \u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eGuide to choosing the correct parts:\u003c\/h3\u003e\r\n\u003cp\u003e\u003ca href=\"How%20to%20Pair%20Our%20Full-Width%20Axle%20Conversion%20Kits%20with%20Stretch%20Kits%20on%20Your%20CJ%20or%20YJ\"\u003eCheck out this article to help you match your springs and rear stretch kit. \u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1502_-_Shipping_01445e33-b307-4a14-8c3a-ccccef3ec060.pdf?v=1677697421\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1502_INSTALL_0.pdf?v=1588274704\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32093765173332,"sku":"MB1502","price":649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB1502.jpg?v=1677789920"},{"product_id":"chevy-dana-60-front-axle-truss-and-steering-mount","title":"Chevy Dana 60 Front Axle Truss \/ Steering Ram Mount","description":"\u003cp\u003eChevy full width Dana 60 Axle Truss System with integrated double ended steering ram mount. The Motobilt Chevy Dana 60 axle truss is laser cut and bent out of 3\/8 inch high strength steel for the main structure. The truss spans the length of the axle, and is included in an integrated hydraulic ram mount for full hydraulic steering.\u003c\/p\u003e\r\n\u003cp\u003eThe design is meant for a 2.5 inch double ended ram. The ram is completely protected from underneath with a full skid plate to keep it safe from rocks. The truss and steering ram mount are tied in together and a mount for a small clevis shackle is located on the front center of the steering ram mount. This mount is used to connect your winch to be used as a Suck Down winch point.\u003c\/p\u003e\r\n\u003cp\u003eThe entire system is designed with keyway fitments to ensure a true and straight forward install. Removable skid plate for diff cover is included for ease of access into the differential.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eChevy full width Dana 60 Axle Truss\u003c\/li\u003e\r\n\u003cli\u003eLaser cut 3\/8 inch high strength steel for the main structure\u003c\/li\u003e\r\n\u003cli\u003eRemovable skid plate for diff cover is included ( Diff cover not included )\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003cli\u003eWeight: 75lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eSuggested Parts:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003ca href=\"https:\/\/motobilt.com\/products\/upper-link-mount-front-axle\" rel=\"noopener\" target=\"_blank\"\u003eMB1568\u003c\/a\u003e - Universal Upper Triangulated Link Mount - Front Axle\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/dana-60-lower-link-mount-kit-for-4-link-system\" target=\"_blank\"\u003eMB4006\u003c\/a\u003e - Dana 60 Angled Lower Link Mount Kit\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/dana-60-diff-cover?variant=32072358461524\" target=\"_blank\"\u003eMB4010\u003c\/a\u003e - Dana 60 Heavy Duty Diff Cover\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eProfessional welding is required to install this system properly\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" rel=\"noopener noreferrer\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb4004_-_shipping.pdf?v=1660770008\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eAxle Truss Prep\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" rel=\"noopener noreferrer\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/SD60_Truss_Preperation_Instructions.pdf?v=1617719353\" target=\"_blank\"\u003eAxle Truss Prep\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32094091477076,"sku":"MB4004","price":529.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb4004-2.jpg?v=1587754427"},{"product_id":"coilover-tab-dana-60-front-kingpin","title":"Dana 60 Kingpin Coilover Tab","description":"\u003cp\u003eScotCoilover mounting tab for Dana 60 front kingpin style axle housings. Mounting coilover shocks to a Dana 60 front kingpin style axle has a couple challenges and the Motobilt MB2006 tab answers them. The tab is contoured on the bottom edge (weld surface) to follow the axle tube and contour of the Dana 60 kingpin inner C. The tab is CAD designed from paper templates I have used many times over the years to hand fabricate a similar part. The part is laser cut in house from 1\/4 inch high strength steel plate and has a 1\/2 inch mounting hole for the shock.\u003c\/p\u003e\r\n\u003cp\u003eIt should be noted this tab can be used to mount coilovers and standard gas shocks. The tab raises the mounting location vertical on the axle to help the coils clear high steer arms on the king pin style Dana 60 front axle. Sold individually. You will need 2 tabs to mount 1 coil over. If you are installing on both axles front and back you will need 8 tabs.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCoilover mounting tab for Dana 60 front kingpin\u003c\/li\u003e\r\n\u003cli\u003e1\/2 inch Shock mounting hole is 4.25 inch from the base\u003c\/li\u003e\r\n\u003cli\u003eCNC Laser cut from 1\/4 inch high strength steel plate\u003c\/li\u003e\r\n\u003cli\u003eRaises coilover up to clear high steer arms\u003c\/li\u003e\r\n\u003cli\u003eSold individually so you will need 2 tabs for each coil over.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThis tab can be used to mount coilovers and standard gas shocks\u003c\/li\u003e\r\n\u003cli\u003eYou will need 2 tabs per coil over. \u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32095384436820,"sku":"MB2006","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB2006-view-1.jpg?v=1587754461"},{"product_id":"4-link-axle-tab-steel-3-25-axle-tube","title":"4 Link Axle Tab 3.25\" Axle Tube Diameter","description":"\u003cp\u003eThe Motobilt 4 link axle tabs are laser cut out of 3\/8\" thick steel plate. These brackets are built with pure strength in mind! We offer these brackets for just about every axle and link combination out there. In the case of the Motobilt 4 link axle tabs we thought of everything! You get to choose your axle tube diameter and you get to choose your bolt hole size! These link brackets measure 2 inch from center of hole to the axle tube.\u003cbr\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e4 Link axle tab\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAxle Tube diameter 3.25 inch\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eCommon axle tube diameters:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDana 30 2.500 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 35 2.500 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 44 1\/2 ton 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 10-bolt 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 12-bolt 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 14-bolt 3.500 inch\u003c\/li\u003e\r\n\u003cli\u003eFord 8.8 3.250 inch\u003c\/li\u003e\r\n\u003cli\u003eFord 9-inch 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 60 rear 3.125 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 44 front 3\/4 ton 2.750 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 60 front 3.125 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 70 rear 3.625 inch\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"1\/2 Inch","offer_id":32098623651924,"sku":"MB2054-325-500","price":4.99,"currency_code":"USD","in_stock":true},{"title":"5\/8 Inch","offer_id":32098623684692,"sku":"MB2054-325-625","price":4.99,"currency_code":"USD","in_stock":true},{"title":"3\/4 Inch","offer_id":32098623717460,"sku":"MB2054-325-750","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB2054-View-1_47017c84-daab-45c1-9d9a-744928a76066.jpg?v=1634334770"},{"product_id":"4-link-axle-tab-steel-3-5-axle-tube","title":"4 Link Axle tab 3.5\" Axle Tube Diameter","description":"\u003cp\u003eThe Motobilt 4 link axle tabs are laser cut out of 3\/8\" steel plate. These brackets are built with pure strength in mind! We offer these brackets for just about every axle and link combination out there. In the case of the Motobilt 4 link axle tabs we thought of everything! You get to choose your axle tube diameter and you get to choose your bolt hole size! These link brackets measure 2 inch from center of hole to the axle tube.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e4 Link axle tab\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAxle Tube diameter 3.5 inch\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eCommon axle tube diameters:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDana 30 2.500 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 35 2.500 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 44 1\/2 ton 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 10-bolt 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 12-bolt 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 14-bolt 3.500 inch\u003c\/li\u003e\r\n\u003cli\u003eFord 8.8 3.250 inch\u003c\/li\u003e\r\n\u003cli\u003eFord 9-inch 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 60 rear 3.125 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 44 front 3\/4 ton 2.750 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 60 front 3.125 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 70 rear 3.625 inch\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"1\/2 Inch","offer_id":32098636759124,"sku":"MB2054-350-500","price":4.99,"currency_code":"USD","in_stock":true},{"title":"5\/8 inch","offer_id":42249146564692,"sku":"MB2054-350-625","price":4.99,"currency_code":"USD","in_stock":true},{"title":"3\/4 Inch","offer_id":32098636824660,"sku":"MB2054-350-750","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB2054-View-1_39b68d24-9b4e-4b26-ba37-f896ba41f4fa.jpg?v=1634334806"},{"product_id":"front-spring-perch-drivers-side-chevy-dana-60","title":"Chevy Dana 60 Front Spring Perch Drivers Side","description":"\u003cp\u003eThe Motobilt MB4040 is a single spring perch that was designed specifically for the Chevy Dana 60 front axle. The passenger side perch is cast into the housing and cannot be altered. The driver's side perch can be cut off and a new perch welded on. The Motobilt MB4040 wad designed so that once installed it is the exact same height as the passenger side perch that is cast into the housing. The spring perch is made from 1\/4 inch thick steel plate that is laser cut and cnc bent for a precise fit. Sold individually\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eChevy Dana 60 Front Spring Perch Driver Side\u003c\/li\u003e\r\n\u003cli\u003eLaser cut 1\/4 inch thick steel plate\u003c\/li\u003e\r\n\u003cli\u003eSold as each\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePassenger side perch is cast into the housing and cannot be altered\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB4040_-_Shipping.pdf?v=1616450002\" target=\"_blank\" rel=\"noopener noreferrer\" class=\"btn\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32100235247700,"sku":"MB4040","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb4040-4.jpg?v=1587754428"},{"product_id":"dana-60-lower-link-mount-kit-for-4-link-system","title":"Dana 60 Angled Lower Link Mount Kit","description":"\u003cp\u003eThe Motobilt Dana 60 lower link mounts are cnc laser cut 3\/8\" thick steel plate. The mounts are designed to fit the Dana 60 axle housing tubes which are 3 to 3.25”s in diameter. They are offset to allow the rod end and to achieve maximum articulation. They are made with a 3\/4 inch bolt hole.\u003c\/p\u003e\r\n\u003cp\u003eThey can be used in other applications but were designed to be used with the Motobilt Jeep YJ and TJ 4 link bracket system on the lower front links. These are sold in a complete set of 2 Pairs or enough to do one axle.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDana 60 lower link mounts\u003c\/li\u003e\r\n\u003cli\u003e3\/8\" laser cut steel plate\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e3\/4 inch bolt hole\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCan be used in other applications but were designed to be used with the Motobilt Jeep YJ and TJ 4 link bracket system on the lower front links MB1503\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32100343414868,"sku":"MB4006","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB4006-view-1.jpg?v=1587754461"},{"product_id":"adjustable-track-bar-bracket-steel","title":"Adjustable Track Bar Bracket","description":"\u003cp\u003eThe Motobilt adjustable track bar bracket is built to take the any abuse you can dish out. This bracket is laser cut from 1\/4 inch thick steel plate and CNC formed. The bracket consists of 3 pieces that will need to be welded for install. The brackets utilize 3 different holes that measure 5\/8 inch in diamter. The bracket is also offset so that it will clear your other suspension components. \u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eLaser cut from 1\/4 inch thick steel plate\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eBracket utilize 3 different holes that measure 5\/8 inch in diameter and mounting width of 1 3\/4 inches\u003c\/li\u003e\r\n\u003cli\u003eBracket is also offset so that it will clear your other suspension components\u003c\/li\u003e\r\n\u003cli\u003eSold as each\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThe bracket consists of 3 pieces that will need to be welded for install\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"3 inch","offer_id":32110131216468,"sku":"MB1542-175-300","price":39.99,"currency_code":"USD","in_stock":true},{"title":"3.25 Inch","offer_id":32110131249236,"sku":"MB1542-175-325","price":39.99,"currency_code":"USD","in_stock":true},{"title":"3.5 Inch","offer_id":32110131282004,"sku":"MB1542-175-350","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb1542-1.jpg?v=1587754981"},{"product_id":"bump-stop-pad","title":"Bump Stop Pad","description":"\u003cp\u003eThe Motobilt Bump Stop Pad is designed for 3” axle tubes.  The bump stop pad can easily be modified with slight grinding to fit larger diameter axle tubes if the DIY fabricator or professional installer needs to fit it. The bump stop pads are laser cut and CNC formed in house at Motobilt from 1\/4” high strength steel plate. The contact surface measures 4” x 4.25”.  The pump stop pads were designed specifically for air bump stops. The bump stop pads will also work perfectly with polyurethane or rubber style bump stops.  They are sold individually and ship bare steel.\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32227819552852,"sku":"MB2141","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB2141-view-1.jpg?v=1588976583"},{"product_id":"diy-dana-60-diff-cover","title":"DIY Dana 60 DIFF Cover","description":"\u003c!--[difficulty:1]--\u003e\r\n\u003cp\u003eIf you can weld and want to build your own diff cover, purchase the Dana 60 DIY DIFF Cover. Motobilt DIY Diff Covers are the same as our \u003ca href=\"https:\/\/motobilt.com\/products\/dana-60-diff-cover\" target=\"_blank\"\u003efully-welded\u003c\/a\u003e diff covers, but sold as a kit including the pre-formed pieces and hardware you will need to complete the DIY project yourself. We have included assembly instructions as well. \u003cbr\u003e\u003cbr\u003eWhy change out your diff cover? We do get asked this question on occasion. The factory diff covers are too thin for abuse on the trail. One of the common factory diff cover failures occurs when the edge gets peeled up from a rock sliding across the diff. Peeling can cause the differential fluid to leak out unknowingly and the result could be damaging the gears when you hit the road to drive home. \u003cbr\u003e\u003cbr\u003eAnother failure of factory diff covers are from bending the cover into the ring gear which rubs a hole through. The result here is the same with differential fluid leaking out. One other failure is actually puncturing the factory diff cover with a sharp rock. Again resulting in differential fluid leaking out. Hopefully this explains the need for a heavy duty diff cover. The Motobilt Heavy Duty Fabricated Diff Covers address the failures I have mentioned to ensure your ring and pinion gear sets are well protected. \u003cbr\u003e\u003cbr\u003eAll Motobilt Diff Covers include a LIFETIME WARRANTY from trail damage and manufacture defect. We cannot warranty DIY Diff Covers being welded incorrectly. \u003cbr\u003e\u003cbr\u003eAs with all Motobilt DIY builder parts, an experienced welder is recommended. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e We strongly recommend tacking the pieces together and test fitting it onto the axle before finish welding. We also recommend using pipe thread tape for the fill plug.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e1\/4 inch thick steel plate shell\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e3\/8\" thick steel diff ring\u003c\/li\u003e\r\n\u003cli\u003eIn-house laser and CNC press brake\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003cli\u003eAll parts are shipped bare metal and will need to be painted before install\u003c\/li\u003e\r\n\u003cli\u003eLIFETIME WARRANTY\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eDIY Diff Cover Kit includes:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eLaser-cut 3\/8\" Ring\u003c\/li\u003e\r\n\u003cli\u003eCNC-formed 1\/4\" thick shell\u003c\/li\u003e\r\n\u003cli\u003eOil fill weld-in bung and oil fill plug\u003c\/li\u003e\r\n\u003cli\u003eMounting hardware\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB4010_-_Shipping_Unwelded_16a0684c-d662-42fc-941d-83a5c22f7dfc.pdf?v=1607522809\" class=\"btn\" target=\"_blank\"\u003eComponents\/Assembly Instructions\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/Diff_Cover_Install_Instructions_1.pdf?v=1614262519\" class=\"btn\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32963077079124,"sku":"MB4010-DIY","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb4010-2.jpg?v=1607530948"},{"product_id":"drill-guide-sd60-to-6-on-5-5","title":"Drill Guide SD60 to 6 on 5.5","description":"\u003cp\u003e\u003cspan\u003eThis handy drilling guide is used to mark the hole centers when converting the wheel stub bolt pattern on a Ford Super Duty front axle wheel hubs from 8 bolt on 170mm to 6 bolt on 5.5” bolt circle diameter.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eSimply place the drilling guide over the stock wheel studs, then use the small holes \u0026amp; a punch to mark the exact centers of the new 6 on 5.5” lug pattern.   Drill your wheel hubs to your new desired wheel stud size \u0026amp; press into the wheel hub.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eMachine the diameter of the hub is required going to a smaller lug pattern. We do not provide details on what to do. You can see in the pics for example. \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eNo guessing!  Ensure your new wheel stud pattern is concentric to the wheel hub.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003e1\/8\" thick  Weight = 0.5 lbs\u003c\/span\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":39481430376532,"sku":"MB4107","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB4107-view-2.jpg?v=1632405800"}],"url":"https:\/\/motobilt.com\/collections\/dana-60-axle\/axle.oembed","provider":"Motobilt","version":"1.0","type":"link"}