{"title":"Discontinued Products","description":"\u003cp\u003eWe're streamlining our product lines, and that means phasing out some of our old products. It also means that you're getting an unbeatable discount on our remaining stock! Save 30% on all of our legacy products before they're gone!\u003c\/p\u003e","products":[{"product_id":"jeep-tj-4-inch-stretch-cut-corner-guards-97-06-wrangler-tj-bare-steel-pair","title":"4\" Stretch Corner Guards for Jeep TJ - Steel","description":"\u003ch2 class=\"p1\"\u003e\u003cb\u003eThis product is being discontinued. Final inventory available while supplies last.\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eThe American Made Motobilt Jeep TJ 4 inch stretch cut corner guards move the wheel well opening back 4 inches. This allows you to move your Jeep's axle back 4 inches and maintain a proportional appearance. The corners are laser cut and cnc formed in house at Motobilt. They are made from 3\/16 inch thick steel plate and all of the mounting holes are count sunk.\u003c\/p\u003e\n\u003cp\u003eThe provided hardware gives a clean smooth look to your install. A 4.5 inch laser cut hole is provided in back so that you can mount a 4 inch round led tail light flush with the corners.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eJeep TJ 4 inch stretch cut corner guards\u003c\/li\u003e\n\u003cli\u003eLaser cut 3\/16 inch thick steel plate\u003c\/li\u003e\n\u003cli\u003eHardware included. Nut serts only used where nut is not accessible from the backside.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProudly Made in the USA:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCrafted with precision and pride in the United States, ensuring the highest quality and supporting American manufacturing.\u003c\/li\u003e\n\u003cli\u003e4” wheelbase stretch required to fit as the wheel well is moved back.\u003c\/li\u003e\n\u003cli\u003eSold as pair\u003c\/li\u003e\n\u003cli\u003eWeight: 75lbs (approx.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible Motobilt Rocker Guards:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003ca href=\"https:\/\/motobilt.com\/products\/jeep-tj-rocker-guards-for-comp-and-stretch-cut-corners-97-06-wrangler-tj-bare-steel\" rel=\"noopener\" target=\"_blank\"\u003eMB1054\u003c\/a\u003e Comp\/Stretch Rocker Guards\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/motobilt.com\/products\/jeep-tj-rocker-guards-for-comp-and-stretch-cut-corners-w-tube-step-97-06-wrangler-tj-bare-steel?variant=32408258609236\" rel=\"noopener\" target=\"_blank\"\u003eMB1054-S\u003c\/a\u003e Comp\/Stretch Rocker Guards with step\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/motobilt.com\/products\/rocker-guard-with-boatsides-for-jeep-tj\" rel=\"noopener\" target=\"_blank\"\u003eMB1136\u003c\/a\u003e Boat Side Rocker Guards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size\u003c\/strong\u003e: 5\/16” nut serts use a 17\/32” drill bit to install.\u003c\/li\u003e\n\u003cli\u003eDoes \u003cstrong\u003eNOT\u003c\/strong\u003e work with stock wheel base. As the wheel well opening is moved back.\u003c\/li\u003e\n\u003cli\u003eShips raw steel. Must be painted or powder coated to prevent rust.  See (\u003ca href=\"https:\/\/motobilt.com\/blogs\/first-blog\/steel-it?_pos=3\u0026amp;_sid=2ef388d16\u0026amp;_ss=r\" rel=\"noopener\" target=\"_blank\"\u003eSteel-It\u003c\/a\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb1058_-_shipping.pdf?v=1660766184\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":39998346428500,"sku":"MB1058","price":293.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb1058.jpg?v=1590186124"},{"product_id":"jeep-yj-rocker-guards-for-competition-corners-87-95-wrangler-yj-bare-steel","title":"Comp Cut Rocker Guards for Jeep YJ","description":"\u003ch2 class=\"p1\"\u003e\u003cb\u003eThis product is being discontinued. Final inventory available while supplies last.\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Motobilt YJ Rocker Guards for Competition Corners are in-house laser cut from 3\/16 inch high strength steel. The Rocker Guards extend up to the bottom edge of the door and bend underneath the jeep to protect it. They completely cover the front and the back of the Jeep. The holes in the bottom make it easier to wash mud and debris out. Motobilt YJ Rocker Guards are countersunk and ship bare metal with hardware included.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt YJ Rocker Guards\u003c\/li\u003e\n\u003cli\u003ecut from 3\/16 inch high strength steel\u003c\/li\u003e\n\u003cli\u003eHardware included. Nut serts are only used where the nut is not accessible from the back side.\u003c\/li\u003e\n\u003cli\u003eHardware 12- 5\/16 inch counter sunk bolts with flat washers and nyloc nuts. Nut serts are only used where the nut is not accessible from the backside. Reuses factory body mount bolts. The factory hardware is 7\/16”-14\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProudly Made in the USA:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCrafted with precision and pride in the United States, ensuring the highest quality and supporting American manufacturing.\u003c\/li\u003e\n\u003cli\u003eWorks with or without a body lift.\u003c\/li\u003e\n\u003cli\u003eSold as pair\u003c\/li\u003e\n\u003cli\u003eWeight: 65lbs (approx.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with Motobilt Corner Guards:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/jeep-yj-competition-cut-corners-guards-bare-steel-pair\"\u003eMB1049 \u003c\/a\u003e\u003c\/strong\u003eCompetition cut corner guards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/motobilt.com\/products\/jeep-cj-yj-tj-blank-corner-guards-bare-steel-pair\"\u003eMB1057\u003c\/a\u003e \u003c\/strong\u003eBlank Corner Guards\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/motobilt.com\/products\/comp-cut-highline-rear-corner-armor-for-tj\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eMB1127\u003c\/strong\u003e\u003c\/a\u003e Comp Cut Highline Corner Guards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size\u003c\/strong\u003e: 5\/16” nut serts use a 17\/32” drill bit to install.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eExtends past the factory wheel well opening 1 3\/4 inches.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Fender Fitment: \u003c\/strong\u003eIf running Motobilt highline fenders with flare the rocker will have to be trimmed down to make it shorter.\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eShips raw steel. Must be painted or powder coated to prevent rust.  See (\u003ca href=\"https:\/\/motobilt.com\/blogs\/first-blog\/steel-it?_pos=3\u0026amp;_sid=2ef388d16\u0026amp;_ss=r\" rel=\"noopener\" target=\"_blank\"\u003eSteel-It\u003c\/a\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1043_-_Customer.pdf?v=1588274688\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32109107970132,"sku":"MB1043","price":209.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/motobilt_8_34_of_38.jpg?v=1587754436"},{"product_id":"jeep-yj-rocker-guards-for-competition-corners-w-step-87-95-wrangler-yj-bare-steel","title":"Comp Cut Rocker Guards w\/ tube step for Jeep YJ","description":"\u003ch2 class=\"p1\"\u003e\u003cb\u003eThis product is being discontinued. Final inventory available while supplies last.\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Motobilt YJ Rocker Guards for Competition Corners with tube step are in-house laser cut from 3\/16 inch high strength steel. The Rocker Guards extend up to the bottom edge of the door and bend underneath the jeep to protect it. They completely cover the front and the back of the Jeep. The holes in the bottom make it easier to wash mud and debris out. Motobilt YJ Rocker Guards are countersunk and ship bare metal with hardware included.\u003c\/p\u003e\n\u003cp\u003eThe tube steps are made out of 1.75 inch x 0.120 inch thick steel DOM tubing and include a HD Motobilt Grimple plate for added grip. The steps give you roughly 3.5 inch of space to step on while maintaining the maximum amount of clearance for off road use!\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMotobilt YJ Rocker Guards for Competition Corners with tube step\u003c\/li\u003e\n\u003cli\u003eCut from 3\/16 inch high strength steel\u003c\/li\u003e\n\u003cli\u003eTube steps are made out of 1.75 inch x 0.120 inch thick steel DOM tubing and include a HD Motobilt Grimple plate for added grip.\u003c\/li\u003e\n\u003cli\u003eHardware included. Nut serts only used where the nuts are not accessible from the back side.\u003c\/li\u003e\n\u003cli\u003eHardware 12- 5\/16 inch counter sunk bolts with flat washers and nyloc nuts. Nut serts are only used where the nut is not accessible from the backside. Reuses factory body mount bolts. The factory hardware is 7\/16”-14\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProudly Made in the USA:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCrafted with precision and pride in the United States, ensuring the highest quality and supporting American manufacturing.\u003c\/li\u003e\n\u003cli\u003eWorks with or without a body lift.\u003c\/li\u003e\n\u003cli\u003eSold as a pair.\u003c\/li\u003e\n\u003cli\u003eWeight: 100lbs (approx.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with Motobilt Corner Guards:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/jeep-yj-competition-cut-corners-guards-bare-steel-pair\"\u003eMB1049 \u003c\/a\u003e\u003c\/strong\u003eCompetition cut corner guards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/motobilt.com\/products\/jeep-cj-yj-tj-blank-corner-guards-bare-steel-pair\"\u003eMB1057\u003c\/a\u003e \u003c\/strong\u003eBlank Corner Guards\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/motobilt.com\/products\/comp-cut-highline-rear-corner-armor-for-tj\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eMB1127\u003c\/strong\u003e\u003c\/a\u003e Comp Cut Highline Corner Guards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size\u003c\/strong\u003e: 5\/16” nut serts use a 17\/32” drill bit to install\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eExtends past the factory wheel well opening 1 3\/4 inches.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2”\u003c\/strong\u003e wheelbase stretch or more required.\u003c\/li\u003e\n\u003cli\u003eIf running the Motobilt Highline fenders with a 2” or 4” flare the rocker will have to be trimmed at the front for fitment. \u003c\/li\u003e\n\u003cli\u003eShips raw steel. Must be painted or powder coated to prevent rust.  See (\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/blogs\/first-blog\/steel-it?_pos=3\u0026amp;_sid=2ef388d16\u0026amp;_ss=r\" target=\"_blank\"\u003eSteel-It\u003c\/a\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1043_-_Customer.pdf?v=1588274688\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32109119242324,"sku":"MB1043-S","price":349.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb1054-s-1_0.jpg?v=1587754437"},{"product_id":"jeep-tj-rocker-guards-w-stock-flares-97-06-wrangler-tj-bare-steel","title":"Rocker Guards Fits Stock Flares for Jeep TJ","description":"\u003ch2 class=\"p1\"\u003e\u003cb\u003eThis product is being discontinued. Final inventory available while supplies last.\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eThe American Made Motobilt Jeep Tj rocker guards with stock flares are made out of 3\/16 inch thick steel plate. These guards will work with your factory Jeep fender flares. They are laser cut and cnc formed in house at Motobilt. The mounting hardware is provided and the mounting holes are countersunk for a smooth finish when installed.\u003c\/p\u003e\n\u003cp\u003eOur guards wrap underneath the body and mount to the body mounts also. This provides the ultimate in protection for your jeep's body. We also laser cut slots into the lower section so that they can easily be cleaned after a hard day of wheeling.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep TJ Rocker Guards with stock flares\u003c\/li\u003e\n\u003cli\u003eLaser cut 3\/16 inch thick steel plate\u003c\/li\u003e\n\u003cli\u003eHardware 12- 5\/16 inch counter sunk bolts with flat washers and nyloc nuts. Nut serts are only used where the nut is not accessible from the backside. Reuses factory body mount bolts. The factory hardware is 7\/16”-14\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe proper drill size for the 5\/16 inch Rivnuts is 17\/32”.\u003c\/li\u003e\n\u003cli\u003eWorks with or without a body lift.\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eSold as pair\u003c\/li\u003e\n\u003cli\u003eWeight: 65lbs (approx.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible Corner Guards:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/jeep-tj-factory-cut-corner-guards-97-06-wrangler-tj-bare-steel-pair\" target=\"_blank\"\u003e\u003cb\u003eMB1055\u003c\/b\u003e\u003c\/a\u003e Factory Cut Corner Guards\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/jeep-cj-yj-tj-blank-corner-guards-bare-steel-pair\" target=\"_blank\"\u003e\u003cstrong\u003eMB1057\u003c\/strong\u003e\u003c\/a\u003e Blank Corner Guards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size\u003c\/strong\u003e: 5\/16” nut serts use a 17\/32” drill bit to install.\u003c\/li\u003e\n\u003cli\u003eShips raw steel. Must be painted or powder coated to prevent rust.  See (\u003ca href=\"https:\/\/motobilt.com\/blogs\/first-blog\/steel-it?_pos=3\u0026amp;_sid=2ef388d16\u0026amp;_ss=r\" rel=\"noopener\" target=\"_blank\"\u003eSteel-It\u003c\/a\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb1059_-_shipping.pdf?v=1660752074\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32109200080980,"sku":"MB1059","price":209.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb1059.jpg?v=1587754918"},{"product_id":"jeep-lj-unlimited-rocker-guards-between-factory-flares-04-06-wrangler-tj-unlimited-bare-steel","title":"Rocker Guards for Factory Flares for Jeep LJ Unlimited","description":"\u003ch2 class=\"p1\"\u003e\u003cb\u003eThis product is being discontinued. Final inventory available while supplies last.\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eThe American Made Motobilt Jeep LJ Unlimited rocker guards with stock flares are made out of 3\/16 inch thick steel plate. These guards will work with your factory Jeep fender flares. They are laser cut and cnc formed in house at Motobilt. The mounting hardware is provided and the mounting holes are countersunk for a smooth finish when installed.\u003c\/p\u003e\n\u003cp\u003eOur guards wrap underneath the body and mount to the body mounts also. This provides the ultimate in protection for your jeep's body. We also laser cut slots into the lower section so that they can easily be cleaned after a hard day of wheeling.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep LJ Unlimited rocker guards between factory flares\u003c\/li\u003e\n\u003cli\u003eLaser cut 3\/16 inch thick steel plate\u003c\/li\u003e\n\u003cli\u003eHardware 12- 5\/16 inch counter sunk bolts with flat washers and nyloc nuts. Nut serts are only used where the nut is not accessible from the backside. Reuses factory body mount bolts. The factory hardware is 7\/16”-14\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eSold as pair\u003c\/li\u003e\n\u003cli\u003eWeight: 75lbs (approx.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size\u003c\/strong\u003e: 5\/16” nut serts use a 17\/32” drill bit to install.\u003c\/li\u003e\n\u003cli\u003eShips raw steel. Must be painted or powder coated to prevent rust.  See (\u003ca href=\"https:\/\/motobilt.com\/blogs\/first-blog\/steel-it?_pos=3\u0026amp;_sid=2ef388d16\u0026amp;_ss=r\" rel=\"noopener\" target=\"_blank\"\u003eSteel-It\u003c\/a\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb1060_-_shipping.pdf?v=1660752350\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32109231243348,"sku":"MB1060","price":251.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB1060-1.jpg?v=1587754918"},{"product_id":"rocker-guards-w-step-fits-sock-flares-for-jeep-tj","title":"Rocker Guards w\/ step Fits Stock Flares for Jeep TJ","description":"\u003ch2 class=\"p1\"\u003e\u003cb\u003eThis product is being discontinued. Final inventory available while supplies last.\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eThe American Made Motobilt Jeep Tj rocker guards with tube steps for stock flares are made out of 3\/16 inch thick steel plate. These guards will work with your factory Jeep fender flares. They are laser cut and cnc formed in house at Motobilt. The mounting hardware is provided and the mounting holes are countersunk for a smooth finish when installed.\u003c\/p\u003e\n\u003cp\u003eOur guards wrap underneath the body and mount to the body mounts also. This provides the ultimate in protection for your jeep's body. We also laser cut slots into the lower section so that they can easily be cleaned after a hard day of wheeling.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep TJ Rocker Guards with stock flares\u003c\/li\u003e\n\u003cli\u003eTube Step With foot plate\u003c\/li\u003e\n\u003cli\u003eLaser cut 3\/16 inch thick steel plate\u003c\/li\u003e\n\u003cli\u003eHardware 12- 5\/16 inch counter sunk bolts with flat washers and nyloc nuts. Nut serts are only used where the nut is not accessible from the backside. Reuses factory body mount bolts. The factory hardware is 7\/16”-14\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe proper drill size for the 5\/16 inch Rivnuts is 17\/32”.\u003c\/li\u003e\n\u003cli\u003eWorks with or without a body lift.\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eSold as pair\u003c\/li\u003e\n\u003cli\u003eWeight: 85lbs (approx.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible Corner Guards:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/motobilt.com\/products\/jeep-tj-factory-cut-corner-guards-97-06-wrangler-tj-bare-steel-pair\" rel=\"noopener\" target=\"_blank\"\u003e\u003cb\u003eMB1055\u003c\/b\u003e\u003c\/a\u003e Factory Cut Corner Guards\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/motobilt.com\/products\/jeep-cj-yj-tj-blank-corner-guards-bare-steel-pair\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eMB1057\u003c\/strong\u003e\u003c\/a\u003e Blank Corner Guards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size\u003c\/strong\u003e: 5\/16” nut serts use a 17\/32” drill bit to install.\u003c\/li\u003e\n\u003cli\u003eShips raw steel. Must be painted or powder coated to prevent rust.  See (\u003ca href=\"https:\/\/motobilt.com\/blogs\/first-blog\/steel-it?_pos=3\u0026amp;_sid=2ef388d16\u0026amp;_ss=r\" rel=\"noopener\" target=\"_blank\"\u003eSteel-It\u003c\/a\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb1059_-_shipping.pdf?v=1660752074\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32460602769492,"sku":"MB1059-S","price":349.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB1059-S-Image01.png?v=1593212895"},{"product_id":"rocker-guards-w-tube-step-for-factory-flares-for-jeep-lj-unlimited","title":"Rocker Guards w\/Tube Step for Factory Flares for Jeep LJ Unlimited","description":"\u003ch2 class=\"p1\"\u003e\u003cb\u003eThis product is being discontinued. Final inventory available while supplies last.\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Motobilt Rocker Guards for Factory Flares for Jeep LJ Unlimited with tube step are in-house laser cut from 3\/16 inch high strength steel. The Rocker Guards extend up to the bottom edge of the door and bend underneath the jeep to protect it. \u003cbr\u003e\u003cbr\u003eThe slots in the bottom make it easier to wash mud and debris out. A heavy duty step is made from 1.75 inch DOM steel tube with an integrated grimple plate for additional grip when getting in and out of the Jeep. Motobilt Jeep LJ Rocker Guards are countersunk and ship bare metal with hardware included. Hardware 12- 5\/16 inch counter sunk bolts with flat washers and nyloc nuts. Our rocker guards are formed so that they wrap under neath the body of your jeep and tie into the factory body mounts.\u003cbr\u003e\u003cbr\u003eThis allows for the ultimate in under body protection and strength. We also slot the lower portion of the rocker guards to make it easy to clean out your rockers after a hard day of wheeling.\u003cbr\u003e\u003cbr\u003eWeight: 85lbs (approx.)\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJeep LJ Rocker Guards for Factory Flares for Jeep LJ Unlimited with tube step\u003c\/li\u003e\n\u003cli\u003eLaser cut from 3\/16 inch high strength steel\u003c\/li\u003e\n\u003cli\u003eStep is made from 1.75 inch DOM steel tube\u003c\/li\u003e\n\u003cli\u003eHardware 12- 5\/16 inch counter sunk bolts with flat washers and nyloc nuts. Nut serts are only used where the nut is not accessible from the backside. Reuses factory body mount bolts. The factory hardware is 7\/16”-14\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSold as pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size\u003c\/strong\u003e: 5\/16” nut serts use a 17\/32” drill bit to install.\u003c\/li\u003e\n\u003cli\u003eShips raw steel. Must be painted or powder coated to prevent rust.  See (\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/blogs\/first-blog\/steel-it?_pos=3\u0026amp;_sid=2ef388d16\u0026amp;_ss=r\" target=\"_blank\"\u003eSteel-It\u003c\/a\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":39978289954900,"sku":"MB1060-S","price":412.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/3_6.jpg?v=1676924167"},{"product_id":"4-stretch-corner-guards-for-jeep-tj-aluminum","title":"4\" Stretch Corner Guards for Jeep TJ - Aluminum","description":"\u003ch2 class=\"p1\"\u003e\u003cb\u003eThis product is being discontinued. Final inventory available while supplies last.\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eThe American Made Motobilt Jeep TJ 4 inch stretch cut corner guards move the wheel well opening back 4 inches. This allows you to move your Jeep's axle back 4 inches and maintain a proportional appearance. The corners are laser cut and cnc formed in house at Motobilt. They are made from 3\/16 inch thick steel plate and all of the mounting holes are count sunk.\u003c\/p\u003e\n\u003cp\u003eThe provided hardware gives a clean smooth look to your install. A 4.5 inch laser cut hole is provided in back so that you can mount a 4 inch round led tail light flush with the corners.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eJeep TJ 4 inch stretch cut corner guards\u003c\/li\u003e\n\u003cli\u003eLaser cut from Aluminum\u003c\/li\u003e\n\u003cli\u003eHardware included. Nut serts only used where nut is not accessible from the backside.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProudly Made in the USA:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCrafted with precision and pride in the United States, ensuring the highest quality and supporting American manufacturing.\u003c\/li\u003e\n\u003cli\u003e4” wheelbase stretch required to fit as the wheel well is moved back.\u003c\/li\u003e\n\u003cli\u003eSold as pair\u003c\/li\u003e\n\u003cli\u003eWeight: 75lbs (approx.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible Motobilt Rocker Guards:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/jeep-tj-rocker-guards-for-comp-and-stretch-cut-corners-97-06-wrangler-tj-bare-steel\" target=\"_blank\"\u003eMB1054\u003c\/a\u003e Comp\/Stretch Rocker Guards\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/jeep-tj-rocker-guards-for-comp-and-stretch-cut-corners-w-tube-step-97-06-wrangler-tj-bare-steel?variant=32408258609236\" target=\"_blank\"\u003eMB1054-S\u003c\/a\u003e Comp\/Stretch Rocker Guards with step\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/rocker-guard-with-boatsides-for-jeep-tj\" target=\"_blank\"\u003eMB1136\u003c\/a\u003e Boat Side Rocker Guards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNotes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size\u003c\/strong\u003e: 5\/16” nut serts use a 17\/32” drill bit to install.\u003c\/li\u003e\n\u003cli\u003eDoes \u003cstrong\u003eNOT\u003c\/strong\u003e work with stock wheel base. As the wheel well opening is moved back.\u003c\/li\u003e\n\u003cli\u003eShips raw aluminum. Can be painted or powder coated.  See (\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/blogs\/first-blog\/steel-it?_pos=3\u0026amp;_sid=2ef388d16\u0026amp;_ss=r\" target=\"_blank\"\u003eSteel-It\u003c\/a\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":42307067707476,"sku":"MB1058-A","price":314.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb1058.jpg?v=1590186124"}],"url":"https:\/\/motobilt.com\/collections\/discontinued-products.oembed","provider":"Motobilt","version":"1.0","type":"link"}