{"title":"Fuel Cells \u0026 Parts","description":"\u003cp\u003eMotobilt's Fuel Cells \u0026amp; Parts collection offers a range of high-quality fuel cells and accessories designed to  meet your specific needs. Our fabricated steel mounts and aluminum fuel tanks are meticulously crafted to ensure durability and reliability on any adventure. With our expanded manufacturing processes, we can efficiently handle aluminum, enabling us to offer even more options to our customers. Click below on any of the images to find precisely what you need. Our fuel cells offer many options for the DIY builder to increase clearance or stretch the frame of their build. Made right here in the USA. \u003c\/p\u003e","products":[{"product_id":"jk-fuel-pump-extension-kit","title":"In Tank Fuel Pump Extension Kit for Jeep JK\/JKU","description":"\u003cp\u003eWant to reuse your factory Jeep JK\/JKU fuel pump\/sending unit in a different depth of tank? We have the solution!\u003cbr\u003e\u003cbr\u003eThis kit allows you to modify the overall depth of the factory fuel pump while still keeping all of the factory functionality of the fuel system.\u003cbr\u003e\u003cbr\u003eThis kit was developed to work seamlessly with our MB5032 tank \u0026amp; MB5013 tank. Each compatible Motobilt tank has a different tank depth, which is also a different tank depth than the factory tank.\u003cbr\u003e\u003cbr\u003eThe kit includes a pair of longer steel rods perfectly sized \u0026amp; professionally CNC machined to replace the existing steel rods that connect the upper portion of the factory fuel pump to its base. Also included are longer electrical wires to extend the length of the wiring harness that connects the upper portion to the base. We provide comprehensive detailed assembly instructions to guide you this simply but important modification.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBenefits\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1. Stability. The factory fuel pump should remain in contact with the bottom of your aftermarket tank. This helps with the physical stability of the fuel pump by preventing it from being suspended within the tank. This provides longevity of the fuel pump \u0026amp; helps prevent it from becoming damaged from movement.\u003cbr\u003e\u003cbr\u003e2. Accurate \"EMPTY\" Fuel Level. The fuel level float connected to the base of the fuel pump is best positioned to read when it is located low in the aftermarket tank. It's most important to know when you are about to run out of fuel. An unmodified fuel pump (not extended) when used in a deeper aftermarket tank will only read the fuel level at a higher point in the tank \u0026amp; your fuel gauge will appear to read EMPTY when there is actually plenty of fuel left in your aftermarket tank. Extending the factory fuel pump provides a more accurate fuel level reading for when fuel is low.\u003cbr\u003e\u003cbr\u003e3. Reliability. By reusing your modified fuel pump in your aftermarket fuel tank, you ensure you will not receive DTC engines codes, have the same functionality as factory \u0026amp; have the correct fuel pressure to your factory engine (as opposed to replacing your factory fuel pump with an aftermarket fuel pump).\u003cbr\u003e\u003cbr\u003e4. Cost. You save money by NOT having to replace your perfectly good factory fuel pump with an aftermarket fuel pump.\u003cbr\u003e\u003cbr\u003e5. Reuse Factory O-Ring Seal. No need to mess around with different types of fuel sealants or some hard-to-find aftermarket seal or gasket. This kit reuses the factory o-ring seal that comes with your existing make \u0026amp; model of Jeep JK or JKU from 2007 thru 2018. If you ever need to replace the o-ring seal, you simply replace it with the factory Mopar part.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5015_-_Shipping_a05c8565-24e0-4362-a456-10f2987847e7.pdf?v=1666098611\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5015_-_Assembly_Instructions.pdf?v=1666098612\" class=\"btn\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cdiv class=\"video-responsive\"\u003e\u003cspan\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/mxddKsXqEUc\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/div\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32087946264660,"sku":"MB5015","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB5015-view-1.jpg?v=1590186169"},{"product_id":"jeep-jk-jku-aluminum-fuel-cell-with-steel-skid-for-back-half-kit","title":"Aluminum Fuel Cell w\/ Skid Plate for MB3025 Back Half Kit - fits Jeep JK\/JKU","description":"\u003cp\u003eThe Motobilt Jeep JK\/JKU Aluminum Fuel Cell with Steel Skid is a premium solution for relocating the factory fuel tank on a Jeep JK (2 door) or Jeep JKU (4 door) from the passenger center of the vehicle to the rear when you are looking to add space for a true triangulated 4 link rear suspension.\u003cbr\u003e\u003cbr\u003eDesigned specifically to function seamlessly with our MB3025 Jeep JK\/JKU Back Half Kit, this aluminum fuel cell system simply bolts in place \u0026amp; makes the process of building a fully custom Jeep JK\/JKU easy \u0026amp; fast. Our complete fuel tank system was expertly designed using the latest in 3D CAD technology to ensure a perfect fit. (ONLY FITS THE MOTOBILT JK\/JKU BACK HALF FRAME KIT. IT WILL NOT FIT A FACTORY FRAME.)\u003cbr\u003e\u003cbr\u003eThe 20.9 Gallon (79 liter) capacity tank is constructed from 1\/8” aluminum that is precision CNC laser cut \u0026amp; accurately CNC press brake formed. The formed aluminum tank is professionally TIG welded \u0026amp; includes a CNC machined fuel pump mount which features an o-ring groove engineered for the factory Jeep JK\/JKU fuel pump seal (Mopar #55366298AA – sold separately) for fuel tight \u0026amp; leak free connection. We’ve also included CNC machined aluminum bungs for the fuel filler \u0026amp; fuel filler vent. The tank accepts your factory Jeep JK\/JKU fuel pump assembly (Mopar #68065575AC – sold separately). \u003cbr\u003e\u003cbr\u003eThe front side of tank \u0026amp; skid plate features a recess which is engineered to clearance your differential cover for larger axles under full suspension compression. The rear of the skid plate is angled to increase your departure angle. The aluminum tank is separated from contacting the steel skid by 1\/8” thick neoprene rubber which dampens vibrations, prevents galvanic corrosion between dissimilar metals \u0026amp; eliminates rubbing, scratches \u0026amp; rattling. We also include three (3) bolt-on rubber bumpers at the rear of the tank which simply bolt into preinstalled threaded bungs on our MB3025 JK\/JKU Back Half Kit. These rubber bumpers act as a cushion \u0026amp; eliminate vibration \u0026amp; rattling.\u003cbr\u003e\u003cbr\u003eThe heavy duty 100% American made high strength steel skid plate protects your aluminum tank from rocks \u0026amp; trail abuse. The skid plate features weep holes on all four corners to allow mud \u0026amp; debris to be flushed.\u003cbr\u003e\u003c\/p\u003e\r\n\u003cp\u003eWe have included the Motobilt \u003cspan\u003eIn Tank Fuel Pump Extension Kit for Jeep JK\/JKU with this fuel cell (see product components). There is no need to purchase it separately. \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThe new tank is deeper than factory, so the gauge will read that it is full much longer than normal, but when it truly is empty the gauge will be accurate.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eWeight = 80lbs\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFOR OFF-ROAD USE ONLY. \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5013_-_Shipping_d300cf0f-fa55-4cc4-add0-b71c2598712a.pdf?v=1699892785\" class=\"btn\" target=\"_blank\"\u003eTo See What Is Included Then Click Here\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5013_-_Assembly_Instructions_f01f63b5-21b8-4803-888f-f29e4b7bf832.pdf?v=1699892788\" class=\"btn\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32088169087060,"sku":"MB5013","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB5013--Assembled-View-2.jpg?v=1590186129"},{"product_id":"jeep-jk-jku-fuel-access-hatch","title":"Fuel Cell Access Hatch for Jeep JK\/JKU","description":"\u003cp\u003eThe Motobilt MB5019 JK\/JKU Rear Fuel Tank Access Hatch Kit provides convenient access to the fuel pump \u0026amp; connections when relocating fuel tank to the rear on your modified Jeep JK or JKU.  This premium builder kit is designed to function seamlessly with our other builder kits including MB3025 Jeep JK\/JKU Back Half Kit \u0026amp; MB5013 Jeep JK\/JKU Aluminum Fuel Cell with Steel Skid for Back Half Kit.\u003c\/p\u003e\r\n\u003cp\u003eThe factory location of the fuel tank on a Jeep JK or JKU is less than ideal when seeking to install a 4 link rear suspension.  When you make the leap to relocating your passenger side mounted factory fuel tank to a rear mounted aluminum fuel tank in a Jeep JK\/JKU, one of the issues is easy access to your fuel pump.\u003c\/p\u003e\r\n\u003cp\u003eOur MB5019 kit is the solution.  Our kit provides you with a topside removable access hatch located at the rear center interior of the bed area of a JK\/JKU.  No need to crawl under your vehicle \u0026amp; drop the gas tank.  You simply unscrew twelve (12) #10-24 stainless steel screws \u0026amp; presto!  Instant access to your fuel pump!\u003c\/p\u003e\r\n\u003cp\u003eThis kit is constructed from 14 Ga (0.075” thick) steel that is precision laser cut \u0026amp; includes a flush mounted \u0026amp; removable access hatch plate, along with a large bed area cover plate.  We have inset the access hatch plate so it sits perfectly flush \u0026amp; provided you with preinstalled rivnuts making the removal of the access hatch easy to do from the topside.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eThis kit requires cutting into the floor of the bed area.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e This product ships unwelded \u0026amp; unfinished, so you can paint any color to match your vehicle.\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cp\u003e\u003cstrong\u003eWeight = 10lbs\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5019_-_Customer.pdf?v=1588779051\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5019_-_Assembly_Instructions.pdf?v=1646088191\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32088247500884,"sku":"MB5019","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB5019-view-1.jpg?v=1590186161"},{"product_id":"jeep-yj-fuel-tank-with-fuel-pump-cut-out-and-mount-package","title":"Behind the Seat Fuel Cell and Mount w\/ Pump Cut Out Combo for Jeep YJ","description":"\u003cp\u003eCheck out the Motobilt Jeep YJ fuel tank with factory rectangular fuel pump cut out and mount package.. This tank is industry leading in that is was designed specifically for the YJ to maximize fuel capacity while retaining the rear seat. Motobilt offers a solution for relocating the fuel tank in your Jeep YJ. There are a few universal options available like the popular RCI 2161a which is basically a rectangular aluminum fuel cell. It was not designed specifically for the Jeep YJ. The Motobilt Jeep YJ fuel tank was designed to fit behind the rear seat, use the factory rectangular fuel pump, and maximize the space behind the seat. It is actually contoured and angled to fit behind the seat.\u003c\/p\u003e\r\n\u003cp\u003eThe tank has a capacity of roughly 18 US gallons. The Motobilt fuel tank is CNC cut from 1\/8 inch aluminum and formed on a press brake. The tank is TIG welded for ultimate strength. The tank includes a large D-ring style cap. This can be converted to remote fill by purchasing a different filler neck system\u003cspan\u003e that utilizes a \u003c\/span\u003e\u003cspan\u003e12 bolt, 5.38 bolt circle flange\u003c\/span\u003e.\u003c\/p\u003e\r\n\u003cp\u003eThis\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ePACKAGE INCLUDES\u003c\/strong\u003e\u003c\/span\u003e the 2 clamp down bodies capture the top and all four sides of the tank and bolt securely to the mounting base. These parts are CNC Laser Cut but from 16 gauge steel. The parts are formed on a hydraulic press break. This mount will ensure your fuel cell is mounted securely. \u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep YJ behind the seat fuel tank with cutout for factory rectangular fuel pump.\u003c\/li\u003e\r\n\u003cli\u003eBrass roll over valve with 90-degree barbed hose fitting for use with vent line.\u003c\/li\u003e\r\n\u003cli\u003eCut out for factory rectangular fuel pump.\u003c\/li\u003e\r\n\u003cli\u003eFuel pump extension bracket \u003c\/li\u003e\r\n\u003cli\u003eDesigned to fit behind the rear seat\u003c\/li\u003e\r\n\u003cli\u003eCNC cut from 1\/8 inch aluminum\u003c\/li\u003e\r\n\u003cli\u003ePress brake formed\u003c\/li\u003e\r\n\u003cli\u003eTank includes a large D-ring style cap\u003c\/li\u003e\r\n\u003cli\u003e18 US gallons capacity\u003c\/li\u003e\r\n\u003cli\u003eThis fuel cell is used for applications where you are extending the wheel base and the rear axle would contact the factory fuel tank. It would also be used in situations where more ground clearance is needed. This kit works perfectly with the Motobilt Jeep YJ Back Half Kit where the frame rails are moved up and in for ultimate clearace.\u003c\/li\u003e\r\n\u003cli\u003eWe have included a mount specifically for the MB5000-YJ Fuel Cell. The kit consists of three parts: the main under tank plate and two clamp bodies. The under tank plate is CNC Laser Cut from .125 inch high strength steel plate. Mounting brackets are included!\u003c\/li\u003e\r\n\u003cli\u003eWeight: 46lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e12 1\/2\"s tall\u003c\/li\u003e\r\n\u003cli\u003e7\"s wide at the top of the tank\u003c\/li\u003e\r\n\u003cli\u003e10 1\/4\"s wide at the bottom of the tank\u003c\/li\u003e\r\n\u003cli\u003e34 \"s long\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003eWe recommend using Permatex Form-A-Gasket # 2 for the fuel pump mounting surface and on the fuel filler cap assembly, where they mate to the fuel cell.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eFOR OFF-ROAD USE ONLY. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5000-YJ_-_Shipping_17049b76-9a99-4dc0-a761-3b70b050c889.pdf?v=1699890902\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003cspan\u003eIf using an Apple device and the instructions link does not work, then click on the link below and hold down to download the link.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5000-YJ_-_Assembly_Instructions.pdf?v=1699890902\" class=\"btn\" target=\"blank\"\u003eInstructions\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/Filler_Neck_Cap_Assembly_-_R2_13.pdf?v=1588274690\" target=\"_blank\"\u003eFiller \u0026amp; Neck Cap Assembly\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32088839684180,"sku":"MB5000-YJ-Mount","price":719.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB5000-YJ-Mount-1.jpg?v=1589581332"},{"product_id":"jeep-tj-lj-aluminum-fuel-cell-19-gallon-package-97-06-wrangler-tj-tj-unlimited","title":"19 Gallon Fuel Cell Package for Jeep TJ \/ LJ","description":"\u003cp\u003eMotobilt MB5010-TJ-3010-5007 offers a solution for relocating the fuel tank in your Jeep TJ, LJ, JK, or JKU. The Motobilt MB5010-TJ\/LJ was designed to use the stock Jeep TJ, LJ, JK, or JKU fuel pump and designed to fit in the back bed of your Jeep. It is 30 x 12 x 12 inch. This will Not fit behind your seat. The tank has a capacity of roughly 18.7 US gallons. The Motobilt fuel tank is CNC cut from 1\/8 inch aluminum and formed on a press brake, is TIG welded for ultimate strength and includes a large D-ring style cap. This can be converted to remote fill by purchasing a different filler neck system\u003cspan\u003e that utilizes a \u003c\/span\u003e\u003cspan\u003e12 bolt, 5.38 bolt circle flange\u003c\/span\u003e. The Motobilt fuel cell mount and fuel pump claming ring are included.\u003c\/p\u003e\r\n\u003cp\u003eThe mount consists of three parts the main under tank plate and two clamp bodies. The under tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate. You can weld your own mounting brackets to the bottom if needed or utilize the 8 bolt holes already in the mount. The 2 clamp down bodies capture the top and all four sides of the tank and bolt securely to the mounting base. These parts are CNC Laser Cut but from 18 gauge steel. The parts are formed on a hydraulic press break. This mount will ensure your fuel cell is mounted securely.\u003c\/p\u003e\r\n\u003cp\u003eThe Motobilt tank features one fitting on top of the with a 90 degree roll over valve and barbed hose fitting.  A 2nd -8 AN fitting has been added for the 2005-2006 models as they require a return line.   Older model TJ's will simply cap this fitting off as its not needed on the early models.  The MB5010-TJ Fuel Cell already has the provisions for the clamping ring cnc cut into the tank. This means the clamping ring and pump will bolt in with no cutting or drilling necessary! \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eWhen installing the fuel cap assembly, we recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the contact surfaces.\u003c\/strong\u003e\u003c\/span\u003e This is a sealant we have used in the shop numerous times over the years for sealing filler caps on fuel cells.\u003c\/p\u003e\r\n\u003cp\u003eThis fuel cell is used for applications where you are extending the wheel base and the rear axle would contact the factory fuel tank. It would also be used in situations where more ground clearance is needed. This kit works perfectly with the Motobilt Jeep TJ Back Half kit or Motobilt Jeep LJ back half kit, where the frame rails are moved up and in for ultimate clearance.  \u003cspan data-mce-fragment=\"1\"\u003eThis can also be installed in the back of your Jeep XJ\/JK\/JKU for custom applications.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eFuel tank in your Jeep TJ, LJ, XJ, JK or JKU\u003c\/li\u003e\r\n\u003cli\u003eSteel mount\u003c\/li\u003e\r\n\u003cli\u003eFuel pump clamping ring\u003c\/li\u003e\r\n\u003cli\u003e30 inch x12 inch x 12 inch\u003c\/li\u003e\r\n\u003cli\u003eRoughly 18.7 US gallons capacity\u003c\/li\u003e\r\n\u003cli\u003e1 Tig welded threaded insert with 90 degree brass rollover valve with barbed fitting. \u003cspan data-mce-fragment=\"1\"\u003e1\/2 NPT thread. The hose barb is 5\/16\".\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e1 Tig welded -8 AN fitting for return line on 2005-2006 Jeeps. Earlier models will cap off this fitting.\u003c\/li\u003e\r\n\u003cli\u003eCNC cut from 1\/8 inch aluminum\u003c\/li\u003e\r\n\u003cli\u003ePress brake formed\u003c\/li\u003e\r\n\u003cli\u003eTIG welded for ultimate strength\u003c\/li\u003e\r\n\u003cli\u003eIncludes a large D-ring style cap\u003c\/li\u003e\r\n\u003cli\u003eUnder tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight = 40lbs\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThis Fuel Cell Does Not mount in between the frame rails. It will only mount inside the bed of the Jeep\u003c\/li\u003e\r\n\u003cli\u003eA stock Jeep JK\/JKU fuel pump will fit into this tank. \u003c\/li\u003e\r\n\u003cli\u003eThis Fuel Cell Does Not fit behind the factory seat\u003c\/li\u003e\r\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eWe recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the fuel filler cap assembly as the gasket can deteriorate due to ethanol.  \u003c\/strong\u003e\u003c\/li\u003e\r\n\u003cli\u003e2006 TJ fuel pump requires the factory plastic to be slightly trimmed to fit the clamping ring.\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eWhen routing vent hose from the brass roll over valve be sure to loop the hose all the way around the tank before exiting out underneath the Jeep. If running Evap this is the same hose that you will tie into that system.\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eFOR OFF-ROAD USE ONLY. \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5010-TJ_-_Customer.pdf?v=1588274691\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5007_-_Installation_Instructions.pdf?v=1660242137\" target=\"_blank\"\u003eInstallation Instructions (MB5007)\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5036_-_Shipping_13aef956-0ef9-4021-a65b-0c5d91091594.pdf?v=1763494465\" target=\"_blank\"\u003eFiller \u0026amp; Neck Cap Assembly\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32090169704532,"sku":"MB5010-TJ-3010-5007","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/5010-TJ-3010-5007.jpg?v=1587754359"},{"product_id":"jeep-tj-lj-aluminum-fuel-cell-15-gallon-package-97-06-wrangler-tj-tj-unlimited","title":"15 Gallon Fuel Cell for Jeep TJ\/LJ Fuel Pump Package","description":"\u003cp\u003eThe Motobilt MB5005-TJ was designed to use the stock Jeep TJ, LJ, JK, or JKU fuel pump and was designed to fit in the back bed of your Jeep. (See Notes) It is 30 inches L x 12 inches H x 9 inches W and can fit behind your seat if you choose. The tank has a capacity of roughly 15 US gallons. The Motobilt fuel tank is CNC cut from 1\/8 inch aluminum and formed on a press brake, is TIG welded for ultimate strength and includes a large D-ring style cap. This can be converted to remote fill by purchasing a different filler neck system that utilizes a \u003cspan\u003e12 bolt, 5.38 bolt circle flange\u003c\/span\u003e. The Motobilt MB3000 fuel cell mount and MB5007 fuel pump clamping ring are included.\u003c\/p\u003e\r\n\u003cp\u003eThe mount consists of three parts: the main under-tank plate and two clamp bodies. The under tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate. You can weld your own mounting brackets to the bottom if needed or utilize the 8 bolt holes already in the mount. The 2 clamp-down bodies capture the top and all four sides of the tank and bolt securely to the mounting base. These parts are CNC Laser Cut but from 16 gauge steel. The parts are formed on a hydraulic press brake. This mount will ensure your fuel cell is mounted securely. The Motobilt tank features one fitting on top of the tank which has a rollover valve for a vent line. The MB5005-TJ Fuel Cell already has the provisions for the clamping ring CNC cut into the tank. This means the clamping ring and pump will bolt in with no cutting or drilling necessary! \u003cstrong\u003eWhen installing the fuel cap assembly, we recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the contact surfaces.\u003c\/strong\u003e This is a sealant we have used in the shop numerous times over the years for sealing filler caps on fuel cells.\u003c\/p\u003e\r\n\u003cp\u003eThis fuel cell is used for applications where you are extending the wheelbase and the rear axle would contact the factory fuel tank. It would also be used in situations where more ground clearance is needed. This kit works perfectly with the Motobilt Jeep TJ Back Half kit or Motobilt Jeep LJ back half kit, where the frame rails are moved up and in for ultimate clearance. This can also be installed in the back of your Jeep JK\/JKU for custom applications.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep TJ\/LJ\/JK\/JKU aluminum fuel cell\u003c\/li\u003e\r\n\u003cli\u003eMB3000 Fuel Cell Mount\u003c\/li\u003e\r\n\u003cli\u003eMB50007 TJ fuel pump clamping ring\u003c\/li\u003e\r\n\u003cli\u003e30 inch L x 12 inch H x 9 inch W\u003c\/li\u003e\r\n\u003cli\u003e15 US gallons capacity\u003c\/li\u003e\r\n\u003cli\u003eBrass rollover valve with 90-degree barbed fitting used for vent line. \u003cspan data-mce-fragment=\"1\"\u003e1\/2 NPT thread. The hose barb is 5\/16\".\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e-8 AN fitting used for return line on 2004-2006.  Earlier models will simply cap off this fitting.\u003c\/li\u003e\r\n\u003cli\u003eCNC cut from 1\/8 inch aluminum. Hoses and additional fittings not included.\u003c\/li\u003e\r\n\u003cli\u003ePress brake-formed\u003c\/li\u003e\r\n\u003cli\u003eIncludes a large D-ring style cap\u003c\/li\u003e\r\n\u003cli\u003eUnder tank plate is CNC Laser Cut from 1\/8 inch high-strength steel plate\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight = 44lbs\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThis Fuel Cell Does Not mount in between the frame rails. It will only mount inside the bed of the Jeep\u003c\/li\u003e\r\n\u003cli\u003eA stock Jeep JK\/JKU fuel pump will fit into this tank. \u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eThe fuel filler cap assembly gasket can deteriorate due to ethanol. We recommend using the Permatex 80016 Form-A-Gasket number 2 Sealant here also. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e2006 TJ fuel pump requires the factory plastic to be slightly trimmed to fit the clamping ring.\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003e2005 \u0026amp; 2006 TJ's may require the seat to be remounted\/moved in order to clear this fuel cell. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cspan\u003eWhen routing vent hose from the brass roll over valve be sure to loop the hose all the way around the tank before exiting out underneath the Jeep. If running Evap this is the same hose that you will tie into that system.\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/strong\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eFOR OFF-ROAD USE ONLY. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb5005-tj_-_shipping.pdf?v=1660831042\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan\u003eProduct Components\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003e\u003cspan\u003eInstructions\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5007_-_Installation_Instructions.pdf?v=1660242137\" target=\"_blank\"\u003eInstallation Instructions (MB5007)\u003c\/a\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5036_-_Shipping_13aef956-0ef9-4021-a65b-0c5d91091594.pdf?v=1763494465\" target=\"_blank\"\u003eFiller \u0026amp; Neck Cap Assembly\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32090180911188,"sku":"MB5005-TJ-3000-5007","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/5005-tj-3000-5007-1.jpg?v=1587754356"},{"product_id":"fuel-cell-15-gallon","title":"15 Gallon Fuel Cell w\/ -AN Fittings 30x12x9","description":"\u003cp\u003eThe Motobilt 15 Gallon Fuel Cell is a tank that utilizes an external fuel pump. Motobilt offers a solution for relocating the fuel tank in your vehicle. The Motobilt MB5005-3AN was designed to fit in the back bed of your Jeep, truck, or buggy. It is 30 inches L x 12 inches H x 9 inches W and can fit behind your seat if you choose. The tank has a capacity of roughly 15 US gallons. The Motobilt fuel tank is CNC cut from 1\/8 inch aluminum and formed on a press brake, is TIG welded for ultimate strength, and includes a large D-ring style cap. This can be converted to remote fill by purchasing a different filler neck system\u003cspan\u003e that utilizes a \u003c\/span\u003e\u003cspan\u003e12 bolt, 5.38 bolt circle flange\u003c\/span\u003e. The Motobilt MB3000 fuel cell mount will fit this tank perfectly. The kit consists of three parts: the main under-tank plate and two clamp bodies. The under tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate. You can weld your own mounting brackets to the bottom if needed or utilize the 8 bolt holes already in the mount.\u003c\/p\u003e\r\n\u003cp\u003eThe 2 clamp-down bodies capture the top and all four sides of the tank and bolt securely to the mounting base. These parts are CNC Laser Cut but from 18 gauge steel. The parts are formed on a hydraulic press brake. This mount will ensure your fuel cell is mounted securely. The Motobilt tank features 3 number 8 -AN fittings on top of the tank which are tig welded into place. The fittings are for the vent line with an included rollover valve pre-installed inside the tank. The tank also includes a fuel pick-up with hose and mount inside the tank and a return line fitting. When installing the fuel cap assembly, we recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the contact surfaces. This is a sealant we have used in the shop numerous times over the years for sealing filler caps on fuel cells.\u003c\/p\u003e\r\n\u003cp\u003eThis fuel cell is used for applications where you are extending the wheelbase and the rear axle would contact the factory fuel tank. It would also be used in situations where more ground clearance is needed. This kit works perfectly with the Motobilt Jeep TJ Back Half kit or Motobilt Jeep LJ back half kit, where the frame rails are moved up and in for ultimate clearance.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDimensions: 30 inch L x 12 inch H x 9 inch W\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e15 US gallons capacity\u003c\/li\u003e\r\n\u003cli\u003eCNC cut from 1\/8 inch aluminum\u003c\/li\u003e\r\n\u003cli\u003ePress brake-formed\u003c\/li\u003e\r\n\u003cli\u003eIncludes a large D-ring style cap\u003c\/li\u003e\r\n\u003cli\u003e2 number 8 -AN fittings on top of the tank which are tig welded into place\u003c\/li\u003e\r\n\u003cli\u003e1 tig welded threaded insert with a 90-degree brass rollover valve with barbed hose end\u003c\/li\u003e\r\n\u003cli\u003eFuel cell mount with dimple dies available under the related parts tab.\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight: \u003c\/strong\u003e\u003c\/li\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003cstrong\u003eFuel cell alone = 15lbs\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWith Mount = 40lbs\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThis Fuel Cell Does Not mount in between the frame rails. It will only mount inside the bed of the Jeep\u003c\/li\u003e\r\n\u003cli\u003eMount sold separately PN MB3000. (See Related Parts)\u003c\/li\u003e\r\n\u003cli\u003eThis fuel cell is used for applications where you are extending the wheelbase and the rear axle would contact the factory fuel tank. It would also be used in situations where more ground clearance is needed.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cspan\u003e\u003cstrong\u003eWe recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the contact surfaces including the fuel filler cap assembly as the gasket can deteriorate due to ethanol. \u003c\/strong\u003e\u003c\/span\u003e \u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eFuel cell and mount package is available by using the drop-down menu option.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFOR OFF-ROAD USE ONLY. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5005-3AN_-_Customer-1.pdf?v=1588274690\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e \u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5036_-_Shipping_13aef956-0ef9-4021-a65b-0c5d91091594.pdf?v=1763494465\" target=\"_blank\"\u003eFiller \u0026amp; Neck Cap Assembly\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Fuel Cell","offer_id":32099108520020,"sku":"MB5005-3AN","price":439.0,"currency_code":"USD","in_stock":true},{"title":"Fuel Cell W\/Mount","offer_id":32099108552788,"sku":"MB5005-3AN-3000","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/fuel-cell-isolated-1.jpg?v=1587754357"},{"product_id":"fuel-cell-19-gallon","title":"19 Gallon Fuel Cell w\/-AN Fittings 30x12x12","description":"\u003cp\u003eMotobilt offers a solution for relocating the fuel tank in your Jeep or buggy. The Motobilt MB5010-3AN was designed to fit in the back bed of your Jeep, truck or buggy. It is 30 x 12 x 12 inch. This will Not fit behind your seat. The tank has a capacity of roughly 18.7 US gallons. The Motobilt tank features 2 number 8 -AN fittings on top of the tank which are tig welded into place. A 3rd 90 degree brass roll over valve with barbed hose fitting is installed for the vent line.  The Motobilt fuel tank is CNC cut from 1\/8 inch aluminum and formed on a press brake, is TIG welded for ultimate strength and includes a large D-ring style cap. This can be converted to remote fill by purchasing a different filler neck system\u003cspan\u003e that utilizes a \u003c\/span\u003e\u003cspan\u003e12 bolt, 5.38 bolt circle flange\u003c\/span\u003e. The Motobilt fuel cell mount MB3010 will fit this tank perfectly.\u003c\/p\u003e\r\n\u003cp\u003eThe kit consists of three parts the main under tank plate and two clamp bodies. The under tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate. You can weld your own mounting brackets to the bottom if needed or utilize the 8 bolt holes already in the mount. The 2 clamp down bodies capture the top and all four sides of the tank and bolt securely to the mounting base. These parts are CNC Laser Cut but from 18 gauge steel. The parts are formed on a hydraulic press break. This mount will ensure your fuel cell is mounted securely.\u003c\/p\u003e\r\n\u003cp\u003eThe Motobilt tank features one fitting on top of the tank which has a roll over valve for a vent line. The MB5010-3AN Fuel Cell already has the provisions for the clamping ring cnc cut into the tank. This means the clamping ring and pump will bolt in with no cutting or drilling necessary! Once the ring is installed, we recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the contact surfaces. This is a sealant we have used in the shop numerous times over the years for sealing filler caps on fuel cells.\u003c\/p\u003e\r\n\u003cp\u003eThis fuel cell is used for applications where you are extending the wheel base and the rear axle would contact the factory fuel tank. It would also be used in situations where more ground clearance is needed. \u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eFuel tank in your Jeep, truck, or buggy\u003c\/li\u003e\r\n\u003cli\u003e2 number 8 -AN fittings on top of the tank which are tig welded into place\u003c\/li\u003e\r\n\u003cli\u003e1 90 degree brass roll over valve with barbed hose fitting for vent line\u003c\/li\u003e\r\n\u003cli\u003e30 inch x12 inch x 12 inch\u003c\/li\u003e\r\n\u003cli\u003eRoughly 18.7 US gallons capacity\u003c\/li\u003e\r\n\u003cli\u003eCNC cut from 1\/8 inch aluminum\u003c\/li\u003e\r\n\u003cli\u003ePress brake formed\u003c\/li\u003e\r\n\u003cli\u003eTIG welded for ultimate strength\u003c\/li\u003e\r\n\u003cli\u003eIncludes a large D-ring style cap\u003c\/li\u003e\r\n\u003cli\u003eUnder tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThis Fuel Cell Does Not mount in between the frame rails. It will only mount inside the bed of the Jeep\u003c\/li\u003e\r\n\u003cli\u003eThis Fuel Cell Does Not fit behind the factory seat\u003c\/li\u003e\r\n\u003cli\u003eFuel mount MB3010 available.  See Related Parts Tab\u003c\/li\u003e\r\n\u003cli\u003eWe recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the contact surfaces. Including the fuel filler cap assembly as the gasket can deteriorate due to ethanol.  \u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eFuel cell and mount package available by using drop down menu option.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFOR OFF-ROAD USE ONLY. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul\u003e\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5010-3AN_-_Customer.pdf?v=1588274689\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5036_-_Shipping_13aef956-0ef9-4021-a65b-0c5d91091594.pdf?v=1763494465\" target=\"_blank\"\u003eFiller \u0026amp; Neck Cap Assembly\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Fuel Cell","offer_id":32099213803604,"sku":"MB5010-3AN","price":539.0,"currency_code":"USD","in_stock":true},{"title":"Fuel Cell W\/Mount","offer_id":32099213869140,"sku":"MB5010-3AN-3010","price":729.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB5010-3an-1.jpg?v=1587754360"},{"product_id":"jeep-tj-lj-aluminum-fuel-cell-15-gallon-97-06-wrangler-tj-tj-unlimited","title":"15 Gallon Fuel Cell for Jeep TJ\/LJ Fuel Pump","description":"\u003cp\u003eThe Motobilt MB5005-TJ was designed to use the stock Jeep TJ, LJ, JK, or JKU fuel pump and was designed to fit in the back bed of your Jeep. (See Notes) It is 30 inches x 12 inches x 9 inches and can fit behind your seat if you choose. The tank has a capacity of roughly 15 US gallons. This fuel tank is CNC cut from 1\/8 inch aluminum and formed on a press brake, is TIG welded for ultimate strength and includes a large D-ring style cap. This can be converted to remote fill by purchasing a different filler neck system that utilizes a 12 bolt, 5.38 bolt circle flange. The Motobilt MB3000 fuel cell mount will fit this tank perfectly.\u003c\/p\u003e\r\n\u003cp\u003eThe optional kit consists of three parts: (Not included) the main under-tank plate and two clamp bodies. The under tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate. You can weld your own mounting brackets to the bottom if needed or utilize the 8 bolt holes already in the mount. The 2 clamp-down bodies capture the top and all four sides of the tank and bolt securely to the mounting base. These parts are CNC Laser Cut but from 18 gauge steel. The parts are formed on a hydraulic press break. This mount will ensure your fuel cell is mounted securely. The Motobilt tank features 2 fittings on top of the tank which has a brass rollover valve for a vent line and a second fitting for the return line on newer 2005-2006 Jeeps.  If you have an older TJ\/LJ then simply cap the second fitting. The MB5005-TJ Fuel Cell already has the provisions for the clamping ring CNC cut into the tank. This means the clamping ring and pump will bolt in with no cutting or drilling necessary!\u003c\/p\u003e\r\n\u003cp\u003eThis fuel cell is used for applications where you are extending the wheelbase and the rear axle would contact the factory fuel tank. It would also be used in situations where more ground clearance is needed. This kit works perfectly with the Motobilt Jeep TJ Back Half kit or Motobilt Jeep LJ back half kit, where the frame rails are moved up and in for ultimate clearance.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep TJ\/LJ\/JK\/JKU aluminum fuel cell\u003c\/li\u003e\r\n\u003cli\u003e30 inch x 12 inch x 9 inch\u003c\/li\u003e\r\n\u003cli\u003e15 US gallons capacity\u003c\/li\u003e\r\n\u003cli\u003eCNC cut from 1\/8 inch aluminum\u003c\/li\u003e\r\n\u003cli\u003ePress brake-formed\u003c\/li\u003e\r\n\u003cli\u003eIncludes a large D-ring style cap\u003c\/li\u003e\r\n\u003cli\u003e1 Tig welded threaded insert with 90 degree brass rollover valve with barbed fitting with 1\/2 NPT thread and a 5\/16” nipple.\u003c\/li\u003e\r\n\u003cli\u003e1 Tig welded -8 AN fitting for return line on 2005-2006 Jeeps. Earlier models will cap off this fitting.\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight = 19lbs\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThis Fuel Cell Does Not mount in between the frame rails. It will only mount inside the bed of the Jeep\u003c\/li\u003e\r\n\u003cli\u003eA stock Jeep JK\/JKU fuel pump will fit into this tank. \u003c\/li\u003e\r\n\u003cli\u003e\u003ca href=\"https:\/\/motobilt.com\/products\/fuel-cell-mount-for-30-x-9-x-12\" target=\"_blank\"\u003e\u003cspan\u003e\u003cstrong\u003eMount sold separately PN MB3000\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\r\n\u003cli\u003eYou must purchase the\u003cspan\u003e \u003c\/span\u003eJEEP TJ FUEL PUMP CLAMPING RING 97-06 WRANGLER TJ if you have not already done so previously.\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eWe recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the fuel filler cap assembly as the gasket can deteriorate due to ethanol.  \u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e2006 TJ fuel pump requires the factory plastic to be slightly trimmed to fit the clamping ring.\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003e2005 \u0026amp; 2006 TJ's may require the seat to be remounted \/ moved in order to clear this fuel cell. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFOR OFF-ROAD USE ONLY. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5005-TJ_-_Customer-1.pdf?v=1588274690\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5036_-_Shipping_13aef956-0ef9-4021-a65b-0c5d91091594.pdf?v=1763494465\" class=\"btn\" target=\"_blank\"\u003eFiller \u0026amp; Neck Cap Assembly\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cdiv style=\"position: absolute; left: 35px; top: 966.406px;\" id=\"gtx-trans\" data-mce-style=\"position: absolute; left: 35px; top: 966.406px;\"\u003e\r\n\u003cdiv class=\"gtx-trans-icon\"\u003e\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"Motobilt","offers":[{"title":"Fuel Cell Only","offer_id":39514709000276,"sku":"MB5005-TJ-1","price":439.0,"currency_code":"USD","in_stock":true},{"title":"Fuel Cell w\/Clamping Ring","offer_id":39514709033044,"sku":"MB5005-TJ-MB5007","price":519.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB5005-Tj-1.jpg?v=1587754355"},{"product_id":"jeep-tj-lj-aluminum-fuel-cell-19-gallon-97-06-wrangler-tj-tj-unlimited","title":"19 Gallon Fuel Cell for Jeep TJ \/ LJ","description":"\u003cp\u003eMotobilt MB5010-TJ offers a solution for relocating the fuel tank in your Jeep TJ, LJ, JK, or JKU. The Motobilt MB5010-TJ\/LJ was designed to use the stock Jeep TJ, LJ, JK, or JKU fuel pump and designed to fit in the back bed of your Jeep. It is 30 x 12 x 12 inches. This will Not fit behind your seat. The tank has a capacity of roughly 18.7 US gallons. The Motobilt fuel tank is CNC cut from 1\/8 inch aluminum and formed on a press brake, is TIG welded for ultimate strength and includes a large D-ring style cap. This can be converted to remote fill by purchasing a different filler neck system\u003cspan\u003e that utilizes a \u003c\/span\u003e\u003cspan\u003e12 bolt, 5.38 bolt circle flange\u003c\/span\u003e. The Motobilt fuel cell mount will fit this tank perfectly. (Sold Separately) \u003c\/p\u003e\r\n\u003cp\u003eThe kit consists of three parts the main under tank plate and two clamp bodies. (Sold Separately) The under tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate. You can weld your own mounting brackets to the bottom if needed or utilize the 8 bolt holes already in the mount. The 2 clamp down bodies capture the top and all four sides of the tank and bolt securely to the mounting base. These parts are CNC Laser Cut but from 18 gauge steel. The parts are formed on a hydraulic press break. This mount will ensure your fuel cell is mounted securely.\u003c\/p\u003e\r\n\u003cp\u003eThe Motobilt tank features one fitting on top of the tank which has a roll over valve for a vent line. The MB5010-TJ Fuel Cell already has the provisions for the clamping ring cnc cut into the tank. This means the clamping ring and pump will bolt in with no cutting or drilling necessary! When installing the fuel cap assembly, we recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the contact surfaces. This is a sealant we have used in the shop numerous times over the years for sealing filler caps on fuel cells.\u003c\/p\u003e\r\n\u003cp\u003eThis fuel cell is used for applications where you are extending the wheel base and the rear axle would contact the factory fuel tank. It would also be used in situations where more ground clearance is needed. This kit works perfectly with the Motobilt Jeep TJ Back Half kit or Motobilt Jeep LJ back half kit, where the frame rails are moved up and in for ultimate clearance. \u003cspan data-mce-fragment=\"1\"\u003eThis can also be installed in the back of your Jeep JK\/JKU for custom applications.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eFuel tank in your Jeep TJ, LJ, JK or JKU\u003c\/li\u003e\r\n\u003cli\u003e30 inch x12 inch x 12 inch\u003c\/li\u003e\r\n\u003cli\u003eRoughly 18.7 US gallons capacity\u003c\/li\u003e\r\n\u003cli\u003e1 Tig welded threaded insert with 90 degree brass rollover valve with barbed fitting with 1\/2” NPT thread and 5\/16” nipple.\u003c\/li\u003e\r\n\u003cli\u003e1 Tig welded -8 AN fitting for return line on 2005-2006 Jeeps. Earlier models will cap off this fitting. Hoses and additional fittings are NOT included.\u003c\/li\u003e\r\n\u003cli\u003eCNC cut from 1\/8 inch aluminum\u003c\/li\u003e\r\n\u003cli\u003ePress brake formed\u003c\/li\u003e\r\n\u003cli\u003eTIG welded for ultimate strength\u003c\/li\u003e\r\n\u003cli\u003eIncludes a large D-ring style cap\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight = 15lbs\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThis Fuel Cell Does Not mount in between the frame rails. It will only mount inside the bed of the Jeep\u003c\/li\u003e\r\n\u003cli\u003eA stock Jeep JK\/JKU fuel pump will fit into this tank. \u003c\/li\u003e\r\n\u003cli\u003eThis Fuel Cell Does Not fit behind the \u003cstrong\u003efactory\u003c\/strong\u003e seat\u003c\/li\u003e\r\n\u003cli\u003eY\u003cspan\u003e\u003cstrong\u003eou must purchase the Clamping ring MB5007\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eif you have not already done so previously.\u003c\/li\u003e\r\n\u003cli\u003eFuel mount sold separately\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ePN MB5010\u003c\/strong\u003e\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eWe recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the fuel filler cap assembly as the gasket can deteriorate due to ethanol in the gas.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eFOR OFF-ROAD USE ONLY. \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\u003c\/ul\u003e\r\n\r\n  \u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5036_-_Shipping_13aef956-0ef9-4021-a65b-0c5d91091594.pdf?v=1763494465\" target=\"_blank\"\u003eFiller \u0026amp; Neck Cap Assembly\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32099371909204,"sku":"MB5010-TJ","price":539.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb5010-tj-1.jpg?v=1587754358"},{"product_id":"remote-fuel-cell-filler-mount","title":"Remote Fuel Cell Filler Mount Large","description":"\u003cp\u003eMotobilt now offers a remote fuel cell filler mount bracket. Bracket is made out of 1\/8 inch P and O Plate. Fits 6 or 12 bolt flange. Made to fit 1-3\/4 inch tube.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRemote fuel cell filler mount\u003c\/li\u003e\r\n\u003cli\u003eSold as each\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight = 3lbs\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eFor other components such as fast fuel valves, hoses, and caps check out Jaz Products\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32099410870356,"sku":"MB5006","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mbweb_1_of_206.jpg?v=1587754913"},{"product_id":"fuel-cell-mount-for-30-x-9-x-12","title":"Fuel Cell Mount for 30 X 9 X 12 Cell","description":"\u003cp\u003eThe Motobilt Fuel Cell Mount for the MB5005  was designed utilizing the latest 3D CAD design software to ensure a proper fit. The kit consists of three parts including the main under tank plate and two clamp bodies. The main under tank plate is a one piece design unlike some of the others on the market.  If you are using an \u003cstrong\u003eRCI 2161a you must verify\u003c\/strong\u003e the locations of the filler neck and other components before ordering our mount.\u003c\/p\u003e\r\n\u003cp\u003eThis design cost a little more to manufacture due to the large plate. It eliminates the sharp edges coming in contact with the bottom side of the fuel cell. This can be important in some situations where you may have body and\/or chassis flex. The under tank plate is CNC Laser Cut from .125 inch high strength steel plate. You can weld your own mounting brackets to the bottom if needed or utilize the 8 bolt holes already in the part.\u003c\/p\u003e\r\n\u003cp\u003eThe 2 clamp down bodies capture the top and all four sides of the tank and bolt securely to the mounting base. These parts are CNC Laser Cut but from 16 gauge steel. The parts are formed on a hydraulic press brake.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eFuel Cell Mount for the MB5005 or other cells meassuring 30 in L x 9 in W x 12 in H\u003c\/li\u003e\r\n\u003cli\u003eCNC Laser Cut but from 16 gauge steel\u003c\/li\u003e\r\n\u003cli\u003eUnder tank plate CNC laser cut from .125 inch high strength steel plate\u003c\/li\u003e\r\n\u003cli\u003ePress brake formed\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight = 16lbs\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThe Fuel cell mount is ships bare metal. You will need to paint or powdercoat the part\u003c\/li\u003e\r\n\u003cli\u003eThe bolts required are not included\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eThe fuel cell is not included with the mount\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003cli\u003eThis universal mount and can be used in off-road vehicles, rat rods, street rods, drag racing, and more\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb3000_-_shipping.pdf?v=1660834739\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32099465363540,"sku":"MB3000","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB3000-2.jpg?v=1587754491"},{"product_id":"fuel-cell-mount-30-x-12-x-12","title":"Fuel Cell Mount for 30 X 12 X 12 Cell","description":"\u003cp\u003eThe Motobilt Fuel Cell Mount for the 30 x 12 x 12 or the MB5010 TJ\/LJ was designed utilizing the latest 3D CAD design software to ensure a proper fit. The kit consists of three parts including the main under tank plate and two clamp bodies. The main under tank plate is a one piece design unlike some of the others on the market.\u003c\/p\u003e\r\n\u003cp\u003eThis design cost a little more to manufacture due to the large plate. It eliminates the sharp edges coming in contact with the bottom side of the fuel cell. This can be important in some situations where you may have body and\/or chassis flex. The under tank plate is CNC Laser Cut from .125 inch high strength steel plate. You can weld your own mounting brackets to the bottom if needed or utilize the 8 bolt holes already in the part.\u003c\/p\u003e\r\n\u003cp\u003eThe 2 clamp down bodies capture the top and all four sides of the tank and bolt securely to the mounting base. These parts are CNC Laser Cut but from 16 gauge steel. The parts are formed on a hydraulic press brake.\u003cbr\u003eThe Fuel cell mount is shipped bare metal. You will need to paint or powdercoat the part. The bolts required are not shipped due to the different mounting options. The fuel cell  is not included with the mount.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eFuel Cell Mount for the 30 x 12 x 12\u003c\/li\u003e\r\n\u003cli\u003eCNC Laser Cut but from 16 gauge steel\u003c\/li\u003e\r\n\u003cli\u003ePress brake formed\u003c\/li\u003e\r\n\u003cli\u003eUnder tank plate is CNC Laser Cut from .125 inch high strength steel plate\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight = 16lbs\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eShips bare metal. You will need to paint or powdercoat the part\u003c\/li\u003e\r\n\u003cli\u003eBolts not included\u003c\/li\u003e\r\n\u003cli\u003eThe fuel cell not included\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eThe RCI2191A Fuel Cell has gone through many changes over the years and you will need to verify the top of your fuel cell before ordering to ensure it will work for your application.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb3010_-_shipping.pdf?v=1660835599\" rel=\"noopener noreferrer\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32099482632276,"sku":"MB3010","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB3010-mount-3.jpg?v=1587754490"},{"product_id":"fuel-cell-mount-for-rci-2171-f","title":"Fuel Cell Mount for RCI 2171 F","description":"\u003cp\u003eThe Motobilt Fuel Cell Mount for the RCI 2171 with dimple die holes was designed utilizing the latest 3D CAD design software to ensure a proper fit. The kit consists of six parts including the main under tank plate, the top retaining plate, and 4 connecting legs. The main under tank plate is a one piece design that eliminates the sharp edges coming in contact with the bottom side of the fuel cell. This can be important in some situations where you may have body and\/or chassis flex. The under tank plate is CNC Laser Cut from .125 inch high strength steel plate. You can weld your own mounting brackets to the bottom if needed or utilize the 8 bolt holes already in the part.\u003c\/p\u003e\r\n\u003cp\u003eThe the top retaining plate and 4 legs capture the top and bolt securely to the mounting base. These parts are CNC Laser Cut from 16 gauge steel. The parts are formed on a hydraulic press break. The Fuel cell mount is shipped bare metal. You will need to paint or powdercoat the part. The bolts to mount the top retaining plate to the top of the legs are included but the lower mounting bolts required are not shipped due to the different mounting options. The fuel cell (RCI 2171) is not included with the mount.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRCI 2171 fuel cell mount with dimple die holes\u003c\/li\u003e\r\n\u003cli\u003eUnder tank plate is CNC Laser Cut from .125 inch high strength steel plate\u003c\/li\u003e\r\n\u003cli\u003eTop retaining plate and 4 legs re CNC Laser Cut from 16 gauge steel\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThe Fuel cell mount is shipped bare metal. You will need to paint or powdercoat the part\u003c\/li\u003e\r\n\u003cli\u003eThe bolts to mount the top retaining plate to the top of the legs are included but the lower mounting bolts required are not shipped due to the different mounting options\u003c\/li\u003e\r\n\u003cli\u003eThe fuel cell (RCI 2171) is not included with the mount\u003c\/li\u003e\r\n\u003cli\u003eYou must verify the dimensions on the top of your fuel cell as RCI has changed there design many times of the years.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" rel=\"noopener noreferrer\" data-sanitized-target=\"_blank\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5004_-_Shipping_6c96dd6c-cd5b-49d5-a476-24a78f902c38.pdf?v=1659474733\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32099495542868,"sku":"MB5004","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB5004-new-view-1.jpg?v=1659474574"},{"product_id":"jeep-tj-fuel-pump-clamping-ring-97-06-wrangler-tj","title":"Fuel Pump Clamping Ring Kit - fits Jeep TJ","description":"\u003cp\u003eThe Motobilt Jeep TJ Fuel Pump\/Sending Unit Clamping ring is a quick and easy solution to install the factory fuel pump to an after market fuel tank or fuel cell. The Motobilt Jeep TJ Fuel Pump\/Sending Unit Clamping Ring is designed to be used with fuel cells like the RCI 2161a. Installing the ring is simple. You can use the adapter ring as a template to drill holes in your fuel tank. The kit is shipped with the upper clamp ring assembly; which is welded together on the bottom side. We have included pem serts on the inner ring to make installation even easier.\u003c\/p\u003e\r\n\u003cp\u003eThe bottom ring that goes inside the tank has a split in the ring so you can get it into the tank. This ring allows the top and the ring to bolt down without deforming the fuel tank or fuel cell. The upper ring assembly is CNC cut from 1\/8 inch thick steel and the inner split ring is CNC cut from 14 GA steel. The top ring is powdercoated black and the bottom rings are shipped out bare metal. The kit also includes bolts and nylon washers.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep TJ Fuel Pump\/Sending Unit Clamping ring\u003c\/li\u003e\r\n\u003cli\u003eUpper ring assembly is CNC cut from 1\/8 inch thick steel\u003c\/li\u003e\r\n\u003cli\u003eInner split ring is CNC cut from 14 GA steel\u003c\/li\u003e\r\n\u003cli\u003eTop ring is powdercoated black\u003c\/li\u003e\r\n\u003cli\u003eBottom rings are shipped bare metal\u003c\/li\u003e\r\n\u003cli\u003eIncludes bolts and nylon washers, 12-hole high grade BUNA-N rubber gasket\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003cli\u003eI.D 5 1\/4\u003c\/li\u003e\r\n\u003cli\u003eO.D 8 3\/16\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight = 5lbs\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5007_-_Shipping.pdf?v=1660242137\"\u003eProduct Components (Pre 2025)\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5007_-_Shipping_40af0a1e-c2c7-4683-8cca-97ca1adea957.pdf?v=1737461293\"\u003eNew Product Components\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2006 Models requires the factory plastic to be slightly trimmed to fit.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5007_-_Installation_Instructions.pdf?v=1660242137\" class=\"btn\" target=\"_blank\"\u003eInstallation Instructions (Pre 2025)\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5007_-_Installation_Instructions_3fc32fa1-f9ea-4336-a1a7-9b70cab85a6c.pdf?v=1737461293\" class=\"btn\" target=\"_blank\"\u003eNew Installation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32099507896404,"sku":"MB5007","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/IMG_5485.png?v=1736459479"},{"product_id":"rock-crawler-fuel-cell","title":"Rock Crawler Fuel Cell","description":"\u003cp\u003eThe Motobilt Rock Crawler Fuel Cell was designed for off camber wheeling to the extreme. The bottom of the main compartment has a 1.75” hole in the center feeding the bottom sump \/ trap where the fuel pick up is located. The idea is to trap fuel in the bottom sump and keep the pickup submerged in fuel. \u003cbr\u003e\u003cbr\u003eThe main compartment of the tank has an internal baffle to keep the fuel from moving around too much and, more importantly, hold the fuel long enough to feed the bottom sump in the tank. The top of the tank has a d-ring style 12 bolt filler neck. Aftermarket 12 bolt style remote fillers can be used with this tank. The top of the tank has an NPT threaded bung and roll over vent. Also you'll notice that there is a -8AN fitting for the return fuel line. The fuel pick up located at the bottom of the tank is also a -8AN fitting. Fittings to connect to your fuel system are not included. \u003cbr\u003e\u003cbr\u003eThe Motobilt Rock Crawler Fuel Cell holds approximately 12.5 gallons. We kept this tank small and narrow to keep the bottom sump full of fuel. The fuel cell is ideal for rock buggies, competition rock crawlers and trail riding vehicles. \u003cbr\u003e\u003cbr\u003eThe tank was designed using the latest in 3D CAD technology. The tank is made in house at Motobilt utilizing our fiber laser and CNC press brakes. The tank is laser cut from 1\/8” thick aluminum and TIG welded. We use different alloys for the base material and filler rod to preventing cracking. We warranty the tank against manufacturing defect and cracking when using the Motobilt mount. The mount is fabricated from 11ga steel for the base and 16ga steel for the top straps. The top straps come with dimple die holes for added strength and looks. \u003cbr\u003e\u003cbr\u003eMounting the fuel cell can be done many different ways. Under the tank we have laser cut bolt holes the installer can countersink and bolt in. The base is made from 11ga steel to allow brackets to be welded on.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003cbr\u003eThe tank measurements are:\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e15.5” from top of mount to bottom of the 11ga steel mount at top of the sump\u003c\/li\u003e\r\n\u003cli\u003e20” from the top of the tank to the bottom of the sump not including the -AN fitting.\u003c\/li\u003e\r\n\u003cli\u003e20.626\" to the outside width of the main base of the fuel cell mount\u003c\/li\u003e\r\n\u003cli\u003e9.75” front to back not including the bolt flanges. \u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eWeight = 20lbs\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFOR OFF-ROAD USE ONLY. \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb5024_-_shipping.pdf?v=1660832174\" class=\"btn\" target=\"_blank\"\u003eProduct Components \u003c\/a\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5036_-_Shipping_13aef956-0ef9-4021-a65b-0c5d91091594.pdf?v=1763494465\" target=\"_blank\"\u003eFiller \u0026amp; Neck Cap Assembly\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32268732760148,"sku":"MB5024","price":739.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB5024-view-4.jpg?v=1589582539"},{"product_id":"remote-filler-mount-small-6-bolt","title":"Remote Filler Mount Small 6 Bolt","description":"\u003cp\u003eRemote filling a fuel cell requires you to mount a filler neck in a convenient location. The Motobilt remote filler neck mount is designed to mount onto 1.75” round tube. It can easily be modified for other tube diameters or flat surfaces. \u003cbr\u003e\u003cbr\u003eThe remote filler neck mount is designed for smaller filler necks with a 6 bolt flange. The bracket is laser cut and formed from 11GA steel plate.\u003c\/p\u003e\r\n\u003cp\u003eFor other components such as fast fuel valves, hoses, and caps check out Jaz Products\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eWeight = 2lbs\u003c\/strong\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32315315552340,"sku":"MB5008","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB5008-view-1.jpg?v=1590188078"},{"product_id":"weld-on-fuel-pump-mount-kit-fits-jeep-jk-jku-tj","title":"Weld-on Fuel Pump Mount Kit - for Jeep JK\/JKU\/JL\/JLU\/JT\/TJ Fuel Pumps","description":"\u003cp dir=\"auto\"\u003eThe Jeep JK\/JKU\/JL\/JLU was designed with a fuel tank that is mounted on the passenger side. Many custom Jeep builders will relocate the fuel tank to the rear of the vehicle which makes room for a true 4 link rear suspension system. The MB5515 JK\/JKU\/JL\/JLU\/JT\/TJ Weld-On Fuel Pump Mount Kit is ideal for the builder who wants to design \u0026amp; fabricate their own custom built aluminum fuel tank or aluminum fuel cell, yet still have the reliability of utilizing the factory JK, TJ, JL, or JT fuel pump.\u003c\/p\u003e\r\n\u003cp dir=\"auto\"\u003eThe kit consists of a machined aluminum ring which is first laser cut from 3\/4” thick aluminum then precision CNC machined with a groove added to fit the factory fuel pump O-ring seal from Jeep JK\/JKU\/JL\/JLU\/JT (2007 through 2023). The O-ring Seal is sold separately \u0026amp; available direct from Mopar #55366298AA. Our machined aluminum ring includes eight (8) precision machined holes sized for 1\/4”-20 UNC bolts. The machined aluminum ring is designed to be welded to an aluminum fuel tank or fuel cell.\u003c\/p\u003e\r\n\u003cp dir=\"auto\"\u003eThe kit includes a steel clamping ring which fits over the top of your factory JK\/JL\/JT Fuel Pump to apply even clamping pressure on the fuel pump housing to provide a leak free seal between the fuel pump \u0026amp; O-ring seal. The kits also includes eight (8) 1\/4”-20 UNC bolts complete with flat washers \u0026amp; lock washers.\u003c\/p\u003e\r\n\u003cp dir=\"auto\"\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003cp dir=\"auto\"\u003eWeight = 2.6 lbs\u003c\/p\u003e\r\n\u003ch4 dir=\"auto\"\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003eApplications\u003c\/p\u003e\r\n\u003cp\u003e2005-2006 Jeep TJ and LJ\u003c\/p\u003e\r\n\u003cp\u003e2007-2018 Jeep Jk and JKU\u003c\/p\u003e\r\n\u003cp\u003e2018-2023 Jeep JL and JLU\u003c\/p\u003e\r\n\u003cp\u003e2020-2023 Jeep JT Gladiator\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5515_-_Shipping_10a5ce0a-4b38-459e-ae5e-571101af39a2.pdf?v=1706711283\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32533431418964,"sku":"MB5515","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB5515-01-view-1.jpg?v=1595176933"},{"product_id":"round-aluminum-fixation","title":"Round Aluminum Fixation","description":"\u003cp\u003eInstalling aluminum sheet metal parts can present problems when you need to bolt them in place.  Parts like radiators, fuel cells, oil tanks, coolant catch cans and other items that you can not drill a hole can easily be mounted with a fixation welded in place with a threaded hole.  The Motobilt weld on aluminum fixations are laser cut from .375” thick aluminum plate and tapped for a 3\/8-16 bolt. \u003c\/p\u003e\r\n\u003cp\u003eWe have included a sample pic showing a fixation welded to 11GA aluminum with a sample tab bolted in place. We do not include bolt or tabs because of the many different applications this aluminum fixation can be used in.  You can see our \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/motobilt.com\/collections\/builder-parts\" title=\"DIY Brackets and Tabs\"\u003eBuilder Parts\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e section for some of the universal mounting tabs we offer. \u003c\/p\u003e\r\n\u003cp\u003eThe listing is for qty: (1) 3\/8” thick weld on ROUND aluminum fixation with a 3\/8-16 tapped hole in the center. 2” in diameter\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32572798009428,"sku":"MB2121","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB2121-view-1.jpg?v=1596235188"},{"product_id":"oval-aluminum-fixation","title":"Oval Aluminum Fixation","description":"\u003cp\u003eInstalling aluminum sheet metal parts can present problems when you need to bolt them in place.  Parts like radiators, fuel cells, oil tanks, coolant catch cans and other items that you can not drill a hole can easily be mounted with a fixation welded in place with a threaded hole.  The Motobilt weld on aluminum fixations are laser cut from .375” thick aluminum plate and tapped for a 3\/8-16 bolt. \u003c\/p\u003e\r\n\u003cp\u003eWe have included a sample pic showing a fixation welded to 11GA aluminum with a sample tab bolted in place. We do not include bolt or tabs because of the many different applications this aluminum fixation can be used in.  You can see our \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/motobilt.com\/collections\/builder-parts\" title=\"DIY Brackets and Tabs\"\u003eBuilder Parts\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e section for some of the universal mounting tabs we offer. \u003c\/p\u003e\r\n\u003cp\u003eThe listing is for qty: (1) 3\/8” thick weld on OVAL aluminum fixation with a 3\/8-16 tapped hole in the center. \u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32572804661332,"sku":"MB2122","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB2122-view-1.jpg?v=1596235188"},{"product_id":"alum-fuel-tank-steel-skid-for-jeep-tj-lj","title":"Stretch Underbody Fuel Cell for TJ \/ LJ","description":"\u003cp\u003eStretched wheelbase tube fender rock crawling Jeeps have become very common on the trails. The Motobilt Stretched TJ Fuel Cell offers room to keep the tank underneath the Jeep and stretch the wheelbase in the rear up to 6” depending on the axle you are running. The Motobilt Stretch Fuel Cell with skid plate is designed for hardcore wheeling and hold up for many years to come.  Like all of the Motobilt tanks they are manufactured in house utilizing state of the art laser cutting and forming technology. We stand behind our tanks and guarantee them against manufacture defect. \u003c\/p\u003e\n\u003cp\u003eDesigned as a heavy duty upgrade to 1997-2006 Jeep TJ or LJ, this 14.5 gallon fuel tank features an all aluminum fuel cell constructed from 1\/8” thick aluminum sheet that is precision CNC laser cut \u0026amp; CNC press brake formed. The tank is TIG welded for superior weld strength \u0026amp; weld finish. The fuel fill \u0026amp; vent tubes are CNC machined then TIG welded to the aluminum tank body. These machined parts are positioned in the factory location \u0026amp; accept the factory fuel filler hose \u0026amp; vent tube from a 97'-02' TJ (not included). TJ's made between 03'-06' will need to purchase the older style fuel filler hose and vent.\u003cbr\u003e\u003cbr\u003eThe top side of the tank also features a roll over valve (included) . A -8 AN fitting has been added for the 2005-2006 models as they require a return line. (not included) We also include a ¾” thick machined aluminum mount location for the stock Jeep TJ fuel pump from a 2005-2006 model ONLY. \u003cspan\u003eThis means if you have an older model TJ you will need to buy a fuel pump \u003c\/span\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cspan color=\"#ff0000\"\u003eand \u003cspan class=\"il\"\u003epigtail\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e to work with this fuel cell. Select the option to purchase the pigtail along with the fuel cell, or purchase \u003ca href=\"https:\/\/motobilt.com\/products\/fuel-pump-pigtail-for-stretch-underbody-fuel-cell-for-tj-lj\" target=\"_blank\"\u003ehere separately\u003c\/a\u003e. \u003c\/span\u003eThe sealing of the fuel pump is done via an integrated o-ring groove (o-ring not included). The o-ring this is sized for this fuel tight seal also fits a 2007-2018 Jeep JK\/JKU fuel tank.\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003efuel pump seal (Mopar #55366298AA – \u003cstrong\u003eNOT included\u003c\/strong\u003e).\u003c\/span\u003e  The stock TJ fuel pump is securely sandwiched by an upper steel clamping ring \u0026amp; eight (8) ¼” hex bolts (fasteners included).\u003cbr\u003e\u003cbr\u003eThe Motobilt TJ Stretch Fuel Cell is fully protected by a heavy duty 3\/16” steel skid. The steel skid is fully MIG welded \u0026amp; perfectly mounts to your stock TJ frame. The aluminum fuel tank is secured to the steel skid using two steel hold down straps complete with adjustable fasteners.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt TJ Stretch Tank does NOT require a body lift to install. \u003cstrong\u003eWill NOT work with Motobilt TJ or LJ Back Half Kit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFits 1997-2006 Jeep TJ and LJ\u003c\/li\u003e\n\u003cli\u003eWorks with factory exhaust.\u003c\/li\u003e\n\u003cli\u003eTIG welded aluminum fuel cell\u003c\/li\u003e\n\u003cli\u003eAllows for up to 6” wheelbase stretch\u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"UTF-8\"\u003e \u003cspan\u003eWorks with many rear axles including GM 14 bolts, Ford Sterling 10.25\/10.5, Dana 60, Dana 44, Ford 8.8, and many more. \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKID PLATE INCLUDED\u003c\/strong\u003e 3\/16” thick steel.\u003c\/li\u003e\n\u003cli\u003eInstalls into the factory fuel tank location. Will work without stretching your wheelbase also. I.e. You do not have to stretch your wheelbase in order to install this tank. \u003c\/li\u003e\n\u003cli\u003eUses a 2005 - 2006 Jeep TJ Fuel Pump \u003cstrong\u003eONLY\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e14.5 gallon capacity\u003c\/li\u003e\n\u003cli\u003eShips raw steel and raw aluminum.\u003c\/li\u003e\n\u003cli\u003eDesigned for off-road use only\u003c\/li\u003e\n\u003cli\u003eDoes NOT require a body lift to install\u003c\/li\u003e\n\u003cli\u003eWeight: 50lbs (approx.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe pigtail adapter is needed for 2004 and earlier TJ’s to adapt to the newer 2005-2006 TJ fuel pump that is required for this tank. You must use a 2005-2006 pump this does \u003cstrong\u003eNOT\u003c\/strong\u003e allow the use of the older pumps. \u003c\/li\u003e\n\u003cli\u003eFactory fuel filler hose \u0026amp; vent tube from a 97'-02' TJ (not included). TJ's made between 03'-06' will need to purchase the older style fuel filler hose and vent.\u003c\/li\u003e\n\u003cli\u003eJeep TJ fuel pump from a 2005-2006 model ONLY (NOT included)\u003c\/li\u003e\n\u003cli\u003eF\u003cspan\u003euel pump seal (Mopar #55366298AA – NOT included)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen routing vent hose from the brass roll over valve be sure to loop the hose all the way around the tank before exiting out underneath the Jeep. If running Evap this is the same hose that you will tie into that system.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5020_-_Shipping.pdf?v=1608648238\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e \u003c\/p\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5020-TJ-LJ-Alum-Fuel-Tank-skid-installation-instructions8-5-2022.pdf?v=1659726580\" class=\"btn\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Fuel Cell Only","offer_id":39744999981140,"sku":"MB5020","price":999.0,"currency_code":"USD","in_stock":true},{"title":"Fuel Cell with Pigtail Adapter (for TJ's Older Than 2005)","offer_id":39745000013908,"sku":"MB5020-MB5057","price":1019.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB5020-view-4.jpg?v=1611842597"},{"product_id":"fuel-cell-filler-cap-assembly","title":"12 Bolt Fuel Cell Filler Cap Assembly Non Vented","description":"\u003cp\u003eMotobilt is well known for the aluminum fuel cells we manufacture. We often get asked for parts as well. The 12 Bolt D-Ring Fuel Cell Cap Assembly is what we use on our fuel tanks.  The kit is a 12 bolt design with a twist on\/off cap. This is the common 12 bolt design used on many different fuel cells. The kit is an all-steel design. This fuel cell neck cannot be utilized for remote fill applications. The fuel cell pictured is not included.  It is to show how the cap assembly mounts. \u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eKIT INCLUDES:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eNon Vented D-Ring Cap with gasket\u003c\/li\u003e\r\n\u003cli\u003e12 Bolt Cap Base\u003c\/li\u003e\r\n\u003cli\u003e12 Bolt Retainer Flange\u003c\/li\u003e\r\n\u003cli\u003e12 Bolt Gasket (ethanol gas will break down the gasket, we recommend Permatex Form-A-Gasket #2 instead of the gasket)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb5036_-_shipping.pdf?v=1660834272\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5036_-_Shipping_13aef956-0ef9-4021-a65b-0c5d91091594.pdf?v=1763494465\" target=\"_blank\"\u003eFiller \u0026amp; Neck Cap Assembly\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":39366542917716,"sku":"MB5036","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/image_5d272596-8401-478e-ab64-52641a11a48b.jpg?v=1623450121"},{"product_id":"rear-fuel-tank-skid-for-jeep-jlu","title":"Rear Fuel Tank \u0026 Skid for Jeep JL\/JLU","description":"\u003cp\u003eThe Motobilt relocation fuel tank for both the 2 door and 4 door Jeep JL moves the fuel tank from the center of the vehicle to behind the rear axle. Relocating the gas tank allows for more suspension and axle options as your upgrade your Jeep JL with custom 4 link suspensions and long arm kits. The Motobilt Jeep JL tank is designed to be completely bolt in and uses existing holes in your factory frame. No drilling or cutting is required. This tank is also compatible with the factory EVAP system with the supplied EVAP modification kit. Provided in the kit are all the necessary fuel lines and fittings to adapt it to your current emissions and fuel systems. The MB5026 fuel tank is designed to work with the factory fuel pump. The factory rear sway bar will need to be removed to use this tank.  The Currie Anti-Rock Sway Bar will work with the tank. (See Below)\u003c\/p\u003e\n\u003cp\u003eWith the tank relocated to behind the axle, you can use a Ford Super Duty rear axle to match the popular Super Duty 60 front axle swap.  Relocating the tank behind the axle also allows for room to use a triangulated 4-Link suspension setup, which will increase the articulation of the rear axle.\u003c\/p\u003e\n\u003cp\u003eDesigned as a heavy-duty upgrade to 2018+ Jeep JL or JLU, this 21 gallon fuel tank features an all aluminum fuel cell constructed from 1\/8” thick aluminum sheet that is precision CNC laser cut \u0026amp; CNC press brake formed. The tank is TIG welded for superior weld strength and weld finish. The fuel fill and vent tubes are CNC machined then TIG welded to the aluminum tank body. These machined parts will still work with the factory fuel fill and vent.\u003c\/p\u003e\n\u003cp\u003eThe Motobilt JL Fuel Cell is fully protected by a heavy duty 3\/16” steel skid. The steel skid is fully MIG welded \u0026amp; perfectly mounts to your stock JL frame. The aluminum fuel tank is secured to the steel skid using two steel hold down straps.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe factory rear sway bar will need to be removed to use this tank. We recommend the RockJock 4x4 Antirock Rear Sway Bar Kit part number CE-9900JLR4.\u003c\/li\u003e\n\u003cli\u003eThe tank skid plate ships bare steel and must be painted before install.\u003c\/li\u003e\n\u003cli\u003eLike all Motobilt tanks they are for off-road use only. \u003c\/li\u003e\n\u003cli\u003eThe new tank is deeper than factory, so the gauge will read that it is full much longer than normal, but when it truly is empty the gauge will be accurate.\u003c\/li\u003e\n\u003cli\u003eSee install instructions for EVAP fuel line modification. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eCapacity:\u003c\/strong\u003e \u003cspan data-mce-fragment=\"1\"\u003eapprox 21 gallons\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eWeight: 100lbs (approx.)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan data-mce-fragment=\"1\"\u003eIncludes Evap Kit\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5026_-_Shipping_fa226c58-80fe-45c7-aca2-8e116709bc42.pdf?v=1692042799\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5026_-_Assembly_Instructions_dd4a0259-7fee-4602-8401-dcd9a2974901.pdf?v=1699893721\" target=\"_blank\"\u003eFUEL CELL Assembly Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5033_-_Assembly_Instructions_605abe02-080c-4a2c-9309-0e2db870b202.pdf?v=1702917149\" target=\"_blank\"\u003eEVAP Assembly Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":39366739918932,"sku":"MB5026-MB5033","price":1799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB5026-view-1.jpg?v=1624030312"},{"product_id":"jl-evap-and-fuel-line-modification-for-rear-tank","title":"JL EVAP and Fuel Line Modification for Rear Tank","description":"\u003cp\u003eWhen relocating the fuel tank to the back of your JL, you will need to lengthen and move your fuel and EVAP lines to reach the new tank location. We already figured it out for you. This kit provides you with all the necessary fuel lines and fittings so you can relocate your fuel tank and still have the factory fuel fill location and emissions systems function in your jeep. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIn this kit you will receive; the electrical wire and connectors to extend the fuel pump wiring harness, the 3\/8\" fuel line and push connect unions, 5\/16\" fuel line and push connect unions to connect to the EVAP system, and the fuel fill hose and vent to connect back to the factory fuel fill. Instructions are provided to guide you through modifying your current fuel system.\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003cspan\u003eIf using an Apple device and the instructions link does not work, then click on the link below and hold down to download the link.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5033_-_Assembly_Instructions_605abe02-080c-4a2c-9309-0e2db870b202.pdf?v=1702917149\" class=\"btn\" target=\"blank\"\u003eInstructions\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5033_-_Shipping_87d38e36-91a4-443c-a787-4bf54b5d3dd5.pdf?v=1702917433\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":39367368507476,"sku":"MB5033","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB5033_-_Assembly_Instructions.png?v=1622845301"},{"product_id":"rear-fuel-tank-w-skid-plate-for-factory-frame-for-jeep-jku","title":"Rear Fuel Tank w\/Skid Plate for Jeep JK \/ JKU Factory Frame","description":"\u003cp data-mce-fragment=\"1\"\u003eThe Motobilt relocation fuel tank moves the fuel tank from the center of the vehicle to the rear, behind the rear axle. Relocating the tank allows for more suspension and axle options as you upgrade your JK. This tank is designed to be completely bolt in and uses existing holes in your \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eFACTORY FRAME\u003c\/strong\u003e\u003c\/span\u003e. No cutting of the frame is required. This tank is also compatible with the factory EVAP system so no tuning is required. The MB5034, included with the tank, will provide the necessary fuel lines and fittings to adapt it to your current emissions and fuel systems. We will also offer the EVAP kit as a separate product, but it is included. The MB5032 fuel tank is designed to work with the factory fuel pump. The rear sway bar will need to be removed to use this tank.  \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis tank allows you more options to modify your JK. With the tank relocated to behind the axle, you can use a 1 ton rear axle. Relocating the tank to behind the axle also allows use of a triangulated 4-link suspension setup. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDesigned as a heavy duty upgrade for the Jeep JK or JKU, this 22 gallon fuel tank features an all aluminum fuel cell constructed from 1\/8” thick aluminum sheet that is precision CNC laser cut \u0026amp; CNC press brake formed. The tank is TIG welded for superior weld strength \u0026amp; weld finish. The fuel fill \u0026amp; vent tubes are CNC machined then TIG welded to the aluminum tank body. These machined parts are will still work with the factory fuel fill and vent.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Motobilt JK Fuel Cell is fully protected by a heavy duty 3\/16” steel skid. The steel skid is fully MIG welded \u0026amp; perfectly mounts to your \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eSTOCK JK\/JKU FRAME\u003c\/strong\u003e\u003c\/span\u003e. The aluminum fuel tank is secured to the steel skid using two steel hold down straps. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"UTF-8\"\u003eWe have \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0); text-decoration: underline;\"\u003eINCLUDED\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e the Motobilt \u003cspan data-mce-fragment=\"1\"\u003eIn Tank Fuel Pump Extension Kit for Jeep JK\/JKU with this fuel cell along with the EVAP Kit. (see Specifications). There is no need to purchase it separately. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWeight: 110lbs (approx.)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eINSTALL NOTES:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRequires relocating the factory exhaust at the rear of the Jeep JK \/ JKU.\u003c\/li\u003e\n\u003cli\u003eRequires removing the factory sway bar and installing a Currie Anti Rock Sway Bar.  Simply purchase an Anti Rock rear sway bar for either a JK or JKU to match your application. CE-9900-JKR-JK2D (2 Door), CE-9900-JKR4-JK4D (4 Door)\u003c\/li\u003e\n\u003cli\u003eThe skid plate is shipped raw steel and will need to be painted or powder coated.\u003c\/li\u003e\n\u003cli\u003eThis tank works with the Motobilt JK \/ JKU Frame Chop Bumper Installed.\u003c\/li\u003e\n\u003cli\u003eRecommended \u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/jeep-jk-jku-fuel-access-hatch\" target=\"_blank\"\u003eMB5019\u003c\/a\u003e Fuel Cell Access Hatch as the floor board must be cut to make room for the fuel tank.\u003c\/li\u003e\n\u003cli\u003eThe new tank is deeper than factory, so the gauge will \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eread that it is full much longer than normal,\u003c\/strong\u003e\u003c\/span\u003e but when it truly is empty the gauge will be accurate.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5032_-_Shipping_0129e396-c254-4676-a501-4b017a4ec823.pdf?v=1699894601\" class=\"btn\" target=\"_blank\"\u003eTo See What's Included Then Click Here\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5032_-_Assembly_Instructions_e9643b12-4eb2-4a55-9df0-fe1babe4a367.pdf?v=1699894604\" class=\"btn\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"2007-2011","offer_id":39369631793236,"sku":"MB5032-MB5034","price":1799.0,"currency_code":"USD","in_stock":true},{"title":"2012-2018","offer_id":39369631826004,"sku":"MB5032-MB5035","price":1799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB5032-view-2.jpg?v=1622845302"},{"product_id":"2007-2011-jku-fuel-line-and-evap-modification","title":"2007-2011 JKU Fuel Line and EVAP Modification","description":"\u003cp\u003eWhen relocating the fuel tank to the back of your JK, you will need to lengthen and move your fuel and EVAP lines to reach the new tank location. We already figured it out for you. This kit provides you with all the necessary fuel lines and fittings so you can relocate your fuel tank and still have the factory fuel fill location and emissions systems function in your jeep. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIn this kit you will receive; the electrical wire and connectors to extend the fuel pump wiring harness, the 3\/8\" fuel line and push connect unions to extend the EVAP and fuel lines, and the fuel fill vent to connect back to the factory fuel fill. The fuel fill hose in your rig can be modified to work with the relocated tank. Instructions are provided to guide you through modifying your current fuel system.\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eTHIS KIT IS INCLUDED WITH OUR JK \/ JKU FUEL TANK PN# MB5032  NO NEED TO PURCHASE SEPARATELY.\u003c\/b\u003e\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5034_-_Shipping_7f8c462e-4154-48bf-93cd-8f79ef22452b.pdf?v=1699894941\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5034_-_Assembly_Instructions_ver_2_a81e3b34-340a-428e-b1c4-ce8572be4835.pdf?v=1699894947\" class=\"btn\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":39369611477076,"sku":"MB5034","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/IMG_4840_0a62c679-524e-421a-9835-c599c668ef28.jpg?v=1708631448"},{"product_id":"roll-over-vent-valve-and-alumium-weld-in-bung","title":"Roll Over Vent Valve and Aluminum Weld In Bung","description":"\u003cp\u003eBuilding your own fuel cell and need a roll over and vent assembly?  This kit includes one thread in roll over valve and one threaded weld in aluminum bung. the threaded bung is 1\/2 NPT thread. The hose barb is 5\/16\".\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eKIT INCLUDES:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eQTY: 1 Brass Roll Over Valve Vent\u003c\/li\u003e\r\n\u003cli\u003eQTY: 1 Aluminum Weld In Bung\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":39371899404372,"sku":"MB5037","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB5037-view-1.jpg?v=1623450124"},{"product_id":"2012-2018-jku-fuel-line-and-evap-modification","title":"2012-2018 JKU Fuel Line and EVAP Modification","description":"\u003cp\u003eWhen relocating the fuel tank to the back of your JK, you will need to lengthen and move your fuel and EVAP lines to reach the new tank location. We already figured it out for you. This kit provides you with all the necessary fuel lines and fittings so you can relocate your fuel tank and still have the factory fuel fill location and emissions systems function in your jeep. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIn this kit you will receive; the electrical wire and connectors to extend the fuel pump wiring harness, the 3\/8\" fuel line and push connect unions to extend the EVAP and fuel lines, and the fuel fill vent to connect back to the factory fuel fill. The fuel fill hose in your rig can be modified to work with the relocated tank. Instructions are provided to guide you through modifying your current fuel system.\u003c\/p\u003e\r\n\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cb\u003eTHIS KIT IS INCLUDED WITH OUR JK \/ JKU FUEL TANK PN# MB5032  NO NEED TO PURCHASE SEPARATELY\u003c\/b\u003e\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5035_-_Shipping_fa3fc557-1838-4d99-bef4-0049b7305952.pdf?v=1707236886\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003cspan\u003eIf using an Apple device and the instructions link does not work, then click on the link below and hold down to download the link.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5035_-_Assembly_Instructions_ver_2_6a8f9e9b-5fd6-48a6-90be-d276770c72fe.pdf?v=1707236889\" class=\"btn\" target=\"blank\"\u003eInstructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":39380883636308,"sku":"MB5035","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/IMG_4840_dc4c0df9-9f75-4068-9486-d662ee1bdb26.jpg?v=1708631414"},{"product_id":"15-gallon-fuel-cell-w-an-fittings-30x17x7","title":"15 Gallon Fuel Cell w\/ -AN Fittings 30x17x7","description":"\u003cp\u003eSourcing the correct aluminum fuel cell for your custom build can be tricky. If you need to save floor space then this bed mounted fuel cell and fuel cell mount could be the answer you are looking for.  The Motobilt 30x17x7 aluminum fuel cell provides a much smaller footprint than the other 15 gallon aluminum fuel cells we offer.  In addition to a smaller footprint the tall thinner design keeps more fuel on the bottom surface of the tank for better pickup. The tank is 3D CAD designed and laser cut from 11GA aluminum before forming on our CNC press brakes. We TIG weld each tank to ensure there are no leaks. The tank holds approximately 15 gallons of fuel.  The tank features a roll over valve and two -8 AN fittings. One is used for a return and the other has a pick up tube extending to the bottom of the tank.  The tank does not have internal baffling.  Like all of our tanks we stand behind them to guarantee against cracking if you use our mounting systems.  This kit does include the \u003ca href=\"https:\/\/motobilt.com\/collections\/fuel-cells\/products\/fuel-cell-mount-for-rci-2171-f\" title=\"Fuel Cell Mount\"\u003eMotobilt MB5004 Fuel Cell Mount\u003c\/a\u003e. The tank is fabricated for off-road use only.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eKIT INCLUDES:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e15 Gallon Aluminum Fuel Cell\u003c\/li\u003e\r\n\u003cli\u003eSteel Mounting Bracket\u003c\/li\u003e\r\n\u003cli\u003eD-Ring Style Filler Cap and assembly\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e11 GA Aluminum\u003c\/li\u003e\r\n\u003cli\u003eFully TIG Welded\u003c\/li\u003e\r\n\u003cli\u003e12 Bolt Filler Neck\u003c\/li\u003e\r\n\u003cli\u003eRoll Over Valve Included\u003c\/li\u003e\r\n\u003cli\u003e-8AN Fittings\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5038_-_Shipping_86269d0a-ac3c-459f-927d-66a288862b53.pdf?v=1628804082\" target=\"_blank\" class=\"btn\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":39380925513812,"sku":"MB5038","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB5038-view-3-2.jpg?v=1632755626"},{"product_id":"rear-stretch-tank-and-skid-plate-for-jeep-yj","title":"Rear Stretch Tank and Skid Plate for Jeep YJ","description":"\u003cp\u003eStretching the wheelbase on a Jeep Wrangler YJ is a common modification for those looking to rock crawl in their square headlight rig. With decades of experience building Jeep YJ’s for extreme trails we developed our YJ stretch tank.  A little background on this tank.  It is not something new it is something the owner of Motobilt has been doing since the early 2000’s when he previously owned another manufacturer in the DIY fabrication parts space named Blue Torch FabWorks. The stretch tank in those days was the first to hit the market and was designed around the need for a tank when doing an XJ to YJ rear leaf spring conversion. Since then more people are 4 linking and installing coil over shocks in the rear of their Jeep YJ requiring more room.  The stretch tank is a great option for this as well. The main difference between what was manufactured in the early 2000’s and now is the extra clearance for a little more stretch clearance for linked suspensions.  You can gain up to 8” of stretch depending on your axle and ride height \/ bump height. \u003c\/p\u003e\r\n\u003cp\u003eI am sure some of you have questions.  How does the Motobilt Jeep YJ Stretch Tank install?  Installation is easy and straight forward.  You can also see the install instructions here in the description.  You simply drop the factory Jeep YJ gas tank and the Motobilt Jeep YJ Stretch tank bolts into the factory bolt locations.  The Motobilt Jeep YJ Stretch Tank is designed to work with the factory frame.  It will NOT work with the Motobilt Back Half Frame Kit.  On top of the tank you will see two holes.  The holes are for the factory roll over vent valves in the plastic YJ tanks. If yours are dry rotted or cracked you will need to source a couple at a local parts store or online.  If your roll over valves are in good shape simply install them into the new aluminum stretch tank. The tank also features aluminum bungs for the fill hoses in the factory locations.  The Jeep YJ Stretch Tank is also precut for the factory sending unit. \u003c\/p\u003e\r\n\u003cp\u003eThe Motobilt YJ Stretch Tank is 3D CAD designed to ensure a perfect fit every time.  The tank is laser cut and formed from high quality 11GA (1\/8” thick) aluminum and then formed on a CNC press brake here in house at Motobilt.  We then TIG weld the tank completely on all seams. The aluminum fittings on the tank are CNC machined from high grade aluminum and TIG welded for the perfect seal. The skid plate portion of the assembly is also laser cut and CNC formed here in house at Motobilt.  It is constructed of 3\/16” thick steel plate and features the Motobilt logo on the rear face. The tank is shipped bare aluminum. The skid plate and hold down straps for the tank are shipped bare steel and do require painting or powder coating before install. The kit also includes bolt plates to hold down the factory sending unit. \u003c\/p\u003e\r\n\u003cp\u003eAll of the tanks we manufacture are designed and fabricated for off-road use only.\u003c\/p\u003e\r\n\u003cp\u003eWe stand behind our tanks and warranty them against manufacturer defect.  If your tank cracks under normal use we will replace it.\u003c\/p\u003e\r\n\u003cp\u003eSo what do you need to provide?  Well of course you need to prove a 1987-1995 Jeep Wrangler YJ in need of a wheelbase stretch tank.  You will need to provide the factory roll over vent valves from your existing tank or new ones if yours are not in good shape.  A gasket and\/or gasket sealant suitable for fuel applications is required.  You will also want to ensure your factory filler hoses are in good shape. You will also need to supply some muscle power to get the new tank installed. \u003c\/p\u003e\r\n\u003cp\u003eWe proudly manufacture the tank here in house at Motobilt in the USA!\u003c\/p\u003e\r\n\u003ch4\u003e Specifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eApproximately 15 Gallon Capacity\u003c\/li\u003e\r\n\u003cli\u003eInstalls in the factory fuel tank location\u003c\/li\u003e\r\n\u003cli\u003eUses the factory sending unit \/ fuel pump assembly\u003c\/li\u003e\r\n\u003cli\u003eIncludes Steel Bolt Plates for the factory sending unit attachment\u003c\/li\u003e\r\n\u003cli\u003eAllows for approximately 8” of stretch.  \u003c\/li\u003e\r\n\u003cli\u003eAluminum Fuel Tank with a Steel Skid Plate\u003c\/li\u003e\r\n\u003cli\u003eFits Jeep Wranglers 1987 - 1995\u003c\/li\u003e\r\n\u003cli\u003eIncludes rubber liners to go between the tank and skid plate\u003c\/li\u003e\r\n\u003cli\u003eIncludes two laser cut and formed hold down straps\u003c\/li\u003e\r\n\u003cli\u003eWorks perfectly with \u003ca href=\"https:\/\/motobilt.com\/products\/jeep-yj-wheelbase-stretch-kit?variant=32087737466964\" target=\"_blank\"\u003eMotobilt Wheelbase Stretch Kit For Jeep YJ part number MB1500\u003c\/a\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cmeta charset=\"UTF-8\"\u003e \u003cspan\u003eAlso will work with factory leaf spring suspension so stretching your wheelbase is NOT required to install. \u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eMADE IN THE USA\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5016_-_Shipping_77298a9a-c7e4-4104-9b8c-ac39c00f1ed3.pdf?v=1628881274\" target=\"_blank\"\u003e\u003cstrong\u003eProduct Components\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eNotes:  Does NOT work with Back half kit.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eSome model years may need the factory fuel pump mounting flange to be drilled out to 1\/4” holes and use Permatex Form-A-Gasket #2 as the seal.\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eInstructions\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5016_-_Assembly_Instructions_6b077127-289b-4a69-bd21-b95c5deae4fc.pdf?v=1628881274\" class=\"btn\" target=\"_blank\"\u003e\u003cstrong\u003eAssembly Instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":39436725092436,"sku":"MB5016","price":1088.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB5016-view-1.jpg?v=1628893537"},{"product_id":"behind-the-seat-fuel-cell-w-an-fittings-and-mount-for-jeep-yj","title":"Behind the Seat Fuel Cell w\/ -AN Fittings And Mount for Jeep YJ","description":"\u003cp\u003eCheck out the Motobilt behind the Seat Fuel Cell w\/ -AN Fittings And Mount for Jeep YJ. This tank is industry leading in that is was designed specifically for the YJ to maximize fuel capacity while retaining the rear seat. Motobilt offers a solution for relocating the fuel tank in your Jeep YJ. There are a few universal options available like the popular RCI 2161a which is basically a rectangular aluminum fuel cell. It was not designed specifically for the Jeep YJ. The Motobilt Jeep YJ fuel tank was designed to fit behind the rear seat and maximize the space behind the seat. It is actually contoured and angled to fit behind the seat.\u003c\/p\u003e\r\n\u003cp\u003eThe tank has a capacity of roughly 18 US gallons. The Motobilt fuel tank is CNC cut from 1\/8 inch aluminum and formed on a press brake. The tank is TIG welded for ultimate strength. The tank includes a large D-ring style cap. This can be converted to remote fill by purchasing a different filler neck system\u003cspan\u003e that utilizes a \u003c\/span\u003e\u003cspan\u003e12 bolt, 5.38 bolt circle flange\u003c\/span\u003e.\u003c\/p\u003e\r\n\u003cp\u003eThe 2 clamp down bodies capture the top and all four sides of the tank and bolt securely to the mounting base. These parts are CNC Laser Cut but from 16 gauge steel. The parts are formed on a hydraulic press break. This mount will ensure your fuel cell is mounted securely. The Motobilt tank features three number 8 -AN fittings on top of the tank which are tig welded into place.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep YJ behind the seat fuel tank for use with external mounted fuel pump.\u003c\/li\u003e\r\n\u003cli\u003e2 Number 8 -AN fittings on top of the tank which are tig welded into place\u003c\/li\u003e\r\n\u003cli\u003eweld in bung with included roll over valve \u003c\/li\u003e\r\n\u003cli\u003eDesigned to fit behind the rear seat\u003c\/li\u003e\r\n\u003cli\u003eCNC cut from 1\/8 inch aluminum\u003c\/li\u003e\r\n\u003cli\u003ePress brake formed\u003c\/li\u003e\r\n\u003cli\u003eTank includes a large D-ring style cap\u003c\/li\u003e\r\n\u003cli\u003e18 US gallons capacity\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eMount included\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003cli\u003eWeight: 28lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eThe fittings are for:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e1. Vent with an included roll over valve pre-installed inside the tank.\u003c\/li\u003e\r\n\u003cli\u003e2. A return line. #8 -AN\u003c\/li\u003e\r\n\u003cli\u003e3. A pick up tube. The pickup has a barb fitting inside the tank and rubber hose extending to the bottom of the tank. #8 -AN\u003c\/li\u003e\r\n\u003cli\u003eIn the bottom center of the tank we have welded a trap to hold the hose in the center. If you ever need to relocate the tube you can reach through the filler neck opening and move it.\u003c\/li\u003e\r\n\u003cli\u003eThis fuel cell is used for applications where you are extending the wheel base and the rear axle would contact the factory fuel tank. It would also be used in situations where more ground clearance is needed. This kit works perfectly with the Motobilt Jeep YJ Back Half Kit where the frame rails are moved up and in for ultimate clearace.\u003c\/li\u003e\r\n\u003cli\u003eThe Motobilt YJ Behind the Seat Tank will not fit in the Jeep TJ. It would have to be cut and clearanced in a few places. We plan to fabricate one specifically for the TJ at some point in the future.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWe have developed a mount specifically for the MB5000 Fuel Cell. The kit consists of three parts: the main under tank plate and two clamp bodies. The under tank plate is CNC Laser Cut from .125 inch high strength steel plate. Mounting brackets included\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eWe recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the contact surfaces. Including the fuel filler cap assembly as the gasket can deteriorate due to ethanol.  \u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cspan\u003eWhen routing vent hose from the brass roll over valve be sure to loop the hose all the way around the tank before exiting out underneath the Jeep. If running Evap this is the same hose that you will tie into that system.\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e12 1\/2\"s tall\u003c\/li\u003e\r\n\u003cli\u003e7\"s wide at the top of the tank\u003c\/li\u003e\r\n\u003cli\u003e10 1\/4\"s wide at the bottom of the tank\u003c\/li\u003e\r\n\u003cli\u003e34 \"s long\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eFOR OFF-ROAD USE ONLY. \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5000-3AN_-_Shipping_7310dab3-0c27-48db-a8ba-4f4758c30438.pdf?v=1699890901%E2%80%9D\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003cspan\u003eIf using an Apple device and the instructions link does not work, then click on the link below and hold down to download the link.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5000-3AN_-_Assembly_Instructions.pdf?v=1699890902%E2%80%9D\" class=\"btn\" target=\"blank\"\u003eInstructions\u003c\/a\u003e\u003c\/p\u003e\r\n\r\n  \u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5036_-_Shipping_13aef956-0ef9-4021-a65b-0c5d91091594.pdf?v=1763494465\" target=\"_blank\"\u003eFiller \u0026amp; Neck Cap Assembly\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":39472517972052,"sku":"MB5000-AN-MOUNT","price":779.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb5000-with-mount-new.jpg?v=1632522314"},{"product_id":"stretch-fuel-tank-skid-for-jeep-cj","title":"Stretch Fuel Tank \u0026 Skid for Jeep CJ","description":"\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e Stretching the wheelbase on your Jeep CJ does not have to be a difficult modification. The Motobilt Jeep CJ Stretch Fuel Cell \/ Tank allows for up to 6-7 inches stretch depending on what axle you choose. The Motobilt Stretch CJ Tank holds approx 15.5 Gallons of gas.  The tank features a CNC machined mount for the factory Jeep Sending unit from the factory 20 gal poly tank and uses a factory rubber o-ring to seal. The tank bolt in the factory Jeep CJ fuel tank location. It's dimensionally the same envelope as the factory Jeep CJ 20 Gallon poly tank \u0026amp; factory stamped steel skid EXCEPT the forward facing portion of the tank is stretched 6\" towards the rear. The filler \u0026amp; overflow bungs are machined 6061-T6 aluminum \u0026amp; are positioned in exactly the same located as the factory tank. \u003cspan data-mce-fragment=\"1\"\u003eFits 76-86 Jeep CJ5 \u0026amp; CJ7 models.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eThis kit works perfectly with the \u003cstrong\u003e\u003ca title=\"Jeep CJ Wheelbase Stretch Kit\" href=\"https:\/\/motobilt.com\/products\/jeep-cj-wheelbase-stretch-kit\"\u003eMotobilt CJ Wheelbase Stretch Kit\u003c\/a\u003e\u003c\/strong\u003e.  Part# MB1519\u003c\/p\u003e\r\n\u003cp\u003eAlso will work with factory leaf spring suspension so stretching your wheelbase is NOT required to install. \u003c\/p\u003e\r\n\u003cp\u003eThe kit includes:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAluminum CJ Stretch Tank\u003c\/li\u003e\r\n\u003cli\u003eSteel Skid Plate\u003c\/li\u003e\r\n\u003cli\u003eHold Down Straps\u003c\/li\u003e\r\n\u003cli\u003eSending unit hold down ring and hardware\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eYou will need to supply:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eA factory sending unit and o-ring\u003c\/li\u003e\r\n\u003cli\u003eFactory vents and grommets \u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003e\u003cbr\u003e\u003c\/h4\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003eWorks with many rear axles including GM 14 bolts, Ford Sterling 10.25\/10.5, Dana 60, Dana 44, Ford 8.8, and many more. \u003c\/p\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5040_-_Shipping.pdf?v=1644359456\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5040_-_Assembly_Instructions.pdf?v=1644359457\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":39586740469844,"sku":"MB5040","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB5040-view-1.jpg?v=1646429148"},{"product_id":"alum-fuel-pump-mount-for-jeep-cj","title":"Aluminum Fuel Sending Unit Mount for Jeep CJ","description":"Custom fabricating an aluminum fuel tank for your Jeep CJ and need parts?  This is the sending unit mounting ring we manufacture for our Motobilt Jeep CJ tank.  The ring is CNC machined from 6061 aluminum. It is machined to use the factory Jeep CJ sending unit and factory o-ring.  The sending unit mount is aluminum and requires welding to install. This mount covers 1976-1986 Jeep CJs.\r\n\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5527_-_Shipping.pdf?v=1644418287\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5527_-_Assembly_Instructions.pdf?v=1644418287\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":39587218391124,"sku":"MB5527","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB5527-view-1.jpg?v=1644514828"},{"product_id":"fuel-pump-pigtail-for-stretch-underbody-fuel-cell-for-tj-lj","title":"Fuel Pump Pigtail for Stretch Underbody Fuel Cell for TJ \/ LJ","description":"\u003cp\u003eWhen installing the Motobilt \u003ca href=\"https:\/\/motobilt.com\/products\/alum-fuel-tank-steel-skid-for-jeep-tj-lj\" target=\"_blank\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eStretch Underbody Fuel Cell for TJ \/ LJ\u003c\/span\u003e\u003c\/a\u003e ,if you have a Jeep TJ model older than 2005, you will need to purchase a newer model fuel pump. This pigtail will allow you to run a newer model fuel pump on your TJ. \u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5057_-_Fuel_Pump_Pigtail_aae9a833-5b1b-441f-9f6d-5b0506639a88.pdf?v=1659726760\" target=\"_blank\" rel=\"noopener noreferrer\" class=\"btn\"\u003eWiring Instructions\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":39744995426388,"sku":"MB5057","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB5057-view-1.jpg?v=1659561131"},{"product_id":"universal-fuel-access-hatch-kit","title":"Universal Fuel Access Hatch Kit","description":"\u003cp\u003eThis Universal Access Hatch Kit provides lockable \u0026amp; secure access to such items as a gas cap or secured storage area. The kit includes an adjustable locking keyed compression latch, access door, top trim plate \u0026amp; recessed hatch. All material is constructed from high grade 14 gauge steel.\u003cbr\u003e\u003cbr\u003eYou simply cut a 7\" x 7\" opening, insert the hatch, mark \u0026amp; drill your mounting holes \u0026amp; assemble. Presto! You're done!\u003cbr\u003e\u003cbr\u003eAll parts ship as raw steel \u0026amp; unassembled.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5031_-_Shipping.pdf?v=1679323997\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5031_-_Assembly.pdf?v=1679323997\" class=\"btn\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":39998186782804,"sku":"MB5031","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB5031-view-1.jpg?v=1680617195"},{"product_id":"fuel-cell-for-jeep-gladiator-4-link-suspension","title":"Fuel Cell for Jeep Gladiator 4 Link Suspension","description":"\u003cp dir=\"auto\"\u003eThe moment a Gladiator moves into real suspension geometry, the factory fuel tank becomes the obstacle. Link separation tightens. Clearance disappears. The rear of the truck starts negotiating instead of working. Relocating the tank is not an upgrade at that point. It’s a requirement.\u003c\/p\u003e\n\u003cp\u003eA double triangulated rear 4 link needs space the factory Gladiator tank occupies. This system moves the fuel capacity behind the rear axle so suspension geometry, travel, and clearance can exist without compromise. It was built to support serious rear suspension layouts while retaining factory fuel system functionality.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cspan\u003eThe MB5083 relocates approximately 25 gallons of fuel to the rear of the truck in an aluminum tank protected by a 3\/16 inch steel skid plate. This is gain of over 3 additional gallons over the stock tank. With the factory tank removed, link geometry and rear suspension components gain the space they need to operate correctly.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThe system is designed to reuse the factory fuel pump and EVAP components. A dedicated EVAP relocation bracket is included and must be welded to the crossmember, placing the canister in a protected and functional location without custom fabrication.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThis tank can also be used with a factory uncut frame and with the Motobilt bobbed bed configuration. The factory rear track bar mount must be removed to clear the relocated tank and skid.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eHighlights:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eRear mounted fuel tank and skid system for Jeep Gladiator\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eApproximately 25 gallon aluminum fuel tank (3 more than factory)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e3\/16 inch steel skid plate\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDesigned to support double triangulated rear suspension layouts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIncludes hardware to reuse factory fuel pump and EVAP system\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEVAP canister relocation bracket included\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp dir=\"auto\"\u003eEVAP bracket must be welded to Motobilt bobbed bed cross member\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003eInstallation requires removal of the factory fuel tank. Welding is required to attach the EVAP relocation bracket to the cross member.  The rear track bar mount must be removed along with the rear most crossmember. This system is intended for experienced fabricators building linked rear suspension setups. If installing with a bobbed bed a receiver hitch will not work. \u003c\/p\u003e\n\u003cp\u003eOnce installed, fuel capacity, serviceability, and system integration remain intact while the rear suspension gains the space it demands.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cspan\u003eWhen suspension geometry matters more than factory packaging, the fuel system has to move. This tank does exactly that, cleanly, structurally, and without shortcuts.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5083_-_Shipping.pdf?v=1767824257\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5083_-_Assembly_Instructions.pdf?v=1767824257\" class=\"btn\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":42811727839316,"sku":"MB5083","price":1999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5083-square.jpg?v=1780925836"},{"product_id":"tomahawk-fuel-cell","title":"Tomahawk Rear Stretch Fuel Tank for Jeep JK","description":"\u003cp\u003eWhen you stretch the rear or rework the suspension on a JK, the factory fuel tank becomes the first obstacle.\u003c\/p\u003e\r\n\u003cp\u003eThe MB5099 Tomahawk Fuel Cell moves the fuel where it belongs on a serious build. With a 17.5 gallon capacity and a profile that hangs only 5.50 inches below the frame rails, it keeps the rear packaging tight without sacrificing usable fuel volume.\u003c\/p\u003e\r\n\u003cp\u003eDesigned to work with the factory frame or the MB1260 Tomahawk rear bumper, this cell integrates cleanly into builds that demand link clearance and improved departure angle. The compact design supports rear stretch applications and suspension layouts where the factory tank simply no longer fits.\u003c\/p\u003e\r\n\u003cp\u003eThis is not a universal drop in replacement. It is a purpose built solution for JK builds that have outgrown the factory layout.\u003c\/p\u003e\r\n\u003ch3\u003eImportant Information\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eDesigned for rear mounted fuel cell applications.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eMB5100 is required to access the fuel filler.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eWill not work with MB1081 rear bumper.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eProfessional installation recommended.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eProper fuel system plumbing and venting must be followed.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eFits Jeep Wrangler JK\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eCapacity: 17.5 gallons\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eHangs 5.50 inches below frame rails\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eCompatible with factory frame\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eCompatible with MB1260 Tomahawk rear bumper\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eRequires MB5100 for fuel filler access\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eNotes\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eNot compatible with MB1081 rear bumper.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eFinal ground clearance depends on suspension height and rear configuration.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eMay require fuel system modifications depending on overall build setup.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eCommonly used in rear stretch and custom suspension applications.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":42948645683284,"sku":"MB5099","price":1899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5099_Angled_View-square.jpg?v=1780925600"},{"product_id":"tomahawk-fuel-cell-access-hatch","title":"Tomahawk Fuel Tank Access Hatch for Jeep JK","description":"\u003cp\u003eWhen the fuel system moves, access needs to move with it.\u003c\/p\u003e\r\n\u003cp\u003eThe MB5100 Tomahawk Fuel Cell Access Hatch is designed specifically for use with the MB5099 Tomahawk Fuel Cell. It provides a clean, secure way to access the relocated filler without compromising the rear structure of the build.\u003c\/p\u003e\r\n\u003cp\u003eThe hatch features an access door with a lockable handle, keeping the filler protected while maintaining quick serviceability when needed. Whether the Jeep is on the trail or parked, the fuel system remains accessible and secure.\u003c\/p\u003e\r\n\u003cp\u003eThis piece completes the Tomahawk fuel cell setup the way it was intended to function.\u003c\/p\u003e\r\n\u003ch3\u003eImportant Information\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eRequired for use with MB5099 Micro Tomahawk Fuel Cell.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eDesigned specifically for Tomahawk fuel cell configuration.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eProfessional installation recommended.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eFits Jeep Wrangler JK applications using MB5099 fuel cell\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eLockable access door\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eIntegrated handle design\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eNotes\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eMust be used in conjunction with MB5099 Tomahawk Fuel Cell.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eFinal mounting location and configuration will depend on overall build layout.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":42948736974932,"sku":"MB5100","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5100-square.jpg?v=1780926800"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/collections\/image_7362b814-85c8-4918-9081-625ffd7b33f2.jpg?v=1593790733","url":"https:\/\/motobilt.com\/collections\/fuel-cells.oembed?page=4","provider":"Motobilt","version":"1.0","type":"link"}