{"title":"Jeep JK\/JKU 07-18","description":"\u003cp\u003eIn 2007 Jeep changed many things when the JK and JKU Wrangler were released.  The thought of a 4 door Jeep previous to this was very odd.  To some the thought of a 4 door Jeep was funny and had no place in off-roading.  In the early years of the JK platform mostly bolt on accessory companies paid attention to the new release from Jeep.  The hardcore offroad crowd remained focused on the Jeep YJ, TJ and tube buggies.  The Jeep JK and JKU was manufactured from 2007 through 2018 (partial year in 2018 when the Jeep JL was released).\n\u003c\/p\u003e\n\u003cdiv id=\"divtext\" style=\"display: none;\"\u003e\n\u003cp\u003eWith the launch of the JK there was a pivot from a secondary vehicle mindset to a primarily vehicle mindset.  More people were buying the JKU for an everyday driver.  The JKU offered more room for daily life of commuting to work, the grocery store and getting the kids to school. With the changes Jeep became a great platform for weekend adventures and going about daily life during the week.  Jeep clubs started to spring up all over the US and a new Jeep enthusiast type was on the scene.  More bolt on products were flooding the market to include bumpers, light bar mounts, and more.  Over time as older models of the JK\/JKU were getting cheaper in the used market the hardcore wheelers began building JKs.  One ton axle conversion parts, custom suspension, roll cages and more started to be offered like what was previously only seen with the YJ and TJ market. \u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/5EDBAA05-EE51-4CD3-9CC2-62B923050272_480x480.jpeg?v=1588632517\" alt=\"\" style=\"margin-top: 5px; margin-right: 5px; margin-bottom: 5px; float: left;\" width=\"335\" height=\"251\"\u003e\u003c\/div\u003e\n\u003cp\u003eHere at Motobilt our goal is to service multiple customer types.  We offer bumpers and other products for the Jeep enthusiast who wants to add some protection and beef up the look of their Jeep.  We also cater heavily to the DIY fabricators and custom shops who are building highly custom suspensions, steering, roll cages and more.  The \u003ca href=\"https:\/\/motobilt.com\/collections\/builder-parts\" title=\"DIY Builder Parts\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eBuilder Parts\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e section of our website is a place where many of these products can be found.\u003c\/p\u003e\n\u003cp\u003eYou should also check out the Builds section of our website.  We have some JK builds that range from mostly retail bolt on type products to heavily modified rock crawler builds with one ton axles.  Check out the \u003ca href=\"https:\/\/motobilt.com\/collections\/black-jku-build\" title=\"Motobilt Black JKU Build\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eBlack JKU Project\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e to see a very extensively built Jeep.\u003c\/p\u003e\n\u003cp\u003eIf you need assistance picking out products for your Jeep JK please contact us.  We can advise you on bumpers or custom fabrication. We appreciate your interest in Motobilt. \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cinput type=\"button\" value=\"Read More\" id=\"btndisplay\" class=\"btn\"\u003e\u003c\/p\u003e","products":[{"product_id":"motobilt-dana-30-diff-cover","title":"Dana 30 Diff Cover","description":"\u003c!--[difficulty:1]--\u003e\r\n\u003cp\u003eThe Motobilt Dana 30 HD steel diff cover has many features that separate it from others. The Dana 30 HD steel diff cover features a 3\/8\" thick steel ring that will keep the cover from pulling away from the housing when dragging over rocks. The Dana 30 HD steel diff cover also features the proven 1\/4\" thick steel plate design with an integrated 3\/4\" NPT fill plug. The fill plug on the Dana 30 HD steel diff cover allows for easy access, especially when a truss system is commonly used. The Dana 30 HD steel diff cover is welded both on the inside and outside of the cover to ensure maximum protection for superior strength for your front axle to protect your gears and lockers. The Dana 30 HD steel diff cover's design comes from over 14 years of diff cover testing and manufacturing experience. The diff cover ships bare steel and will need to be painted. We do not usually powder coat ours because the diff cover is going to take abuse from rocks. Spray paint works well so you can simply touch it up. The bolts and fill plug ship with the cover.\u003c\/p\u003e\r\n\u003cp\u003eWill fit Jeep CJ, YJ, TJ, LJ, XJ, MJ, ZJ, JK \u0026amp; JKU.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eWeight = 10lbs\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eLIFETIME WARRANTY\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e9\/16 allen head - For the fill plug.\u003c\/li\u003e\r\n\u003cli\u003e12 point 5\/16 socket and ratchet\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eOil Fill\u003c\/strong\u003e: Use the amount of oil suggested by the manufacturer for your year, make and model. Do \u003cstrong\u003eNOT\u003c\/strong\u003e fill to the top of the fill plug, unless this is the appropriate amount for your application.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/Diff_Cover_Install_Instructions_214439d1-b7f1-4b6f-bd54-b02c217ca01b.pdf?v=1646149610\" class=\"btn\" target=\"_blank\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/Diff_Cover_Install_Instructions_214439d1-b7f1-4b6f-bd54-b02c217ca01b.pdf?v=1646149610\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":8352488030251,"sku":"MB4029","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB4029-1.jpg?v=1587754456"},{"product_id":"dana-44-diff-cover","title":"Dana 44 Diff Cover","description":"\u003c!--[difficulty:1]--\u003e\r\n\u003cp\u003eThe Motobilt Dana 44 steel diff cover has many features that separate it from others. The Dana 44  steel diff cover features a 3\/8 inch thick steel ring that will keep the cover from pulling away from the housing when dragging over rocks. The Dana 44 steel diff cover also features the proven 1\/4 inch thick steel plate design with an integrated 3\/4 inch NPT fill plug. The fill plug on the Dana 44 HD steel diff cover allows for easy access, especially when a truss system is commonly used.\u003c\/p\u003e\r\n\u003cp\u003eThe Dana 44 steel diff cover is welded both on the inside and outside of the cover to ensure maximum penetration for superior strength. The Dana 44 steel diff cover's design comes from over 14 years of diff cover testing and manufacturing experience. The diff cover ships bare steel and will need to be painted. We do not usually powdercoat ours because the diff cover is going to take abuse from rocks. Spray paint works well so you can simply touch it up. The bolts and fill plug ship with the cover.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDana 44  steel diff cover\u003c\/li\u003e\r\n\u003cli\u003e1\/4 inch thick steel plate\u003c\/li\u003e\r\n\u003cli\u003e3\/8 inch thick steel ring\u003c\/li\u003e\r\n\u003cli\u003eIntegrated 3\/4 inch NPT fill plug\u003c\/li\u003e\r\n\u003cli\u003eSold as each\u003c\/li\u003e\r\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight = 11lbs\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eShips bare steel and will need to be painted\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eOil Fill\u003c\/strong\u003e: Use the amount of oil suggested by the manufacturer for your year, make and model. Do \u003cstrong\u003eNOT\u003c\/strong\u003e fill to the top of the fill plug, unless this is the appropriate amount for your application.\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eDoes NOT fit Jeep JL\/JT\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eTools:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e9\/16 allen head - For the fill plug.\u003c\/li\u003e\r\n\u003cli\u003e12 point 5\/16 socket and ratchet\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/Diff_Cover_Install_Instructions_214439d1-b7f1-4b6f-bd54-b02c217ca01b.pdf?v=1646149610\" class=\"btn\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32072368422996,"sku":"MB4013","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/image_e235d7ee-30a1-4162-aa2c-5796f8fb5ccd.jpg?v=1587754458"},{"product_id":"winch-fairlead-mount-bolt-on","title":"Winch Fairlead Mount Bolt On","description":"\u003cp\u003eNow you can add a fairlead mount to winch bumpers that do not have them formed or welded into place. This bracket is easy to install. Simply remove the 4 bolts holding your winch in place. Lift the winch up and slide the bracket under. You may need longer bolts once the bracket is in place. The bracket is CNC Laser Cut and formed on a hydraulic press brake from 3\/16 inch high strength steel plate. The part is shipped bare metal ready for you to paint or powdercoat the color you choose.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWinch fairlead mount-bolt on\u003c\/li\u003e\r\n\u003cli\u003eCan be used with both roller and hawse fairleads\u003c\/li\u003e\r\n\u003cli\u003eCNC Laser cut from 3\/16 inch high strength steel plate\u003c\/li\u003e\r\n\u003cli\u003eFormed on a hydraulic press brake\u003c\/li\u003e\r\n\u003cli\u003eEasy to install\u003c\/li\u003e\r\n\u003cli\u003eThe winch bolt pattern is the standard 10 inch wide by 4.5 inch seen on Warn, Superwinch, Mile Marker, Smittybilt, Harbor Freight, and more\u003c\/li\u003e\r\n\u003cli\u003eSold as each\u003c\/li\u003e\r\n\u003cli\u003eWeight: 4lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThis part is shipped bare metal ready for you to paint or powdercoat the color you choose\u003c\/li\u003e\r\n\u003cli\u003eYou may need longer bolts once the bracket is in place\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eThis winch fairlead mount does not work with the Warn EVO 8-S, Warn VR EVO 10-S winch or the Badland APEX 12,000 winch. Please check fitment if not using a Motobilt bumper as they can be mounted further back and will cause interference in some applications. Use the MB1141 fairlead mount instead.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eYou will need to purchase our \u003ca href=\"https:\/\/motobilt.com\/products\/universal-hawse-fairlead-mount\"\u003eUniversal Fairlead Mount\u003c\/a\u003e if you have the above winches.\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32083328565332,"sku":"MB1002","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb1002-1.jpg?v=1587755018"},{"product_id":"weld-washer-tear-drop-14mm-hole","title":"Weld Washer Tear Drop 14mm hole","description":"\u003cp\u003eThe Motobilt tear drop weld washer is laser cut from 3\/16 inch steel. Each washer features a tear drop shape to increase the surface are to weld. These washers are terrific at reinforcing holes for suspension links, frame holes, brackets, or just about any mount you can think to put them onto.\u003c\/p\u003e\r\n\u003cp\u003eThe Motobilt tear drop weld washers can also be used to repair worn, torn, oblong, stretched out holes. The fix it weld washer!\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eTear drop weld washer 14mm hole\u003c\/li\u003e\r\n\u003cli\u003eLaser cut from 3\/16 inch steel\u003c\/li\u003e\r\n\u003cli\u003eSold as set of 4\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eTerrific at reinforcing holes for suspension links, frame holes, brackets, or just about any mount you can think to put them onto\u003c\/li\u003e\r\n\u003cli\u003eCan also be used to repair worn, torn, oblong, stretched out holes\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32083590447188,"sku":"MB2096-14M","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb2096-5_3_3466a763-cc98-4268-842d-3330ee185780.jpg?v=1587755012"},{"product_id":"jeep-jk-fenders-rear-crusher-series-07-18-wrangler-jk","title":"Crusher Rear Fender 2\" Flare for Jeep JK \/ JKU - Steel","description":"\u003cp\u003e\u003cspan\u003eTired of those huge extra wide fenders?  Then set your Jeep JK apart from the rest with these 2 inch wide Jeep JK Rear Fenders.  Made from 3\/16” laser cut steel plate they are ready for the toughest trails on earth.  The cutting edge design allows these fenders to fit perfectly and their raw finish means you can match them to your specific needs.  No need to hope they match your setup as you can customize them for the perfect look.  The Motobilt Jeep JK Crusher Series front fenders give you that ultra high clearance that you need for big tires but still have the look and protection of a heavy duty steel fender flare.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003cspan\u003eThe Motobilt Jeep JK Rear Crusher Series Fenders are a bolt on design.  Their design does allow an extra 1 ½ inches to be removed from the factory fender well opening to be removed from the front and another 1 1\/2 inches in the back to accommodate larger tires if you choose.\u003c\/span\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eIncluded are a passenger and driver side rear fender flare and all of the necessary mounting hardware for the front of your 2007-2018 Jeep Wrangler JK or JKU.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003cspan\u003eMaterial 3\/16 steel\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003e2 inch flare\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003eShips raw steel. Must be painted or powder coated to prevent rust.  See (\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/blogs\/first-blog\/steel-it?_pos=3\u0026amp;_sid=2ef388d16\u0026amp;_ss=r\" target=\"_blank\"\u003eSteel-It\u003c\/a\u003e)\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eProudly Made in the USA:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCrafted with precision and pride in the United States, ensuring the highest quality and supporting American manufacturing.\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eInner fender not included\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eFits 2007-2018 Jeep Wrangler JK or JKU rear\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003eWeight: 40lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eRelated Parts:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003cspan\u003eJK rear inner fenders part number MB1071\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1076-2_-_Shipping.pdf?v=1618500029\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1076_-_Installation_Instructions.pdf?v=1588274699\" class=\"btn\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32084102217812,"sku":"MB1076-2","price":669.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB1076-Pair-1.jpg?v=1590186147"},{"product_id":"jeep-jk-fenders-front-crusher-series-07-18-wrangler-jk","title":"Crusher Front Fender 2\" Flare for Jeep JK \/ JKU - Steel","description":"\u003cp\u003e\u003cspan\u003eTired of those huge extra wide fenders?  Then set your Jeep JK apart from the rest with these 2 inch wide Jeep JK Front Fenders.  Made from 3\/16” laser cut steel plate they are ready for the toughest trails on earth.  The cutting edge design allows these fenders to fit perfectly and their raw finish means you can match them to your specific needs.  No need to hope they match your setup as you can customize them for the perfect look.  The Motobilt Jeep JK Crusher series front fenders give you that ultra high clearance that you need for big tires but still have the look and protection of a heavy duty steel fender flare.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eThe Motobilt Jeep JK front Crusher fenders are a bolt on design.  Their design does allow an extra 1 ½ inches to be removed from the factory fender well opening to accommodate larger tires if you choose.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eIncluded are a passenger and driver side front fender flare and all of the necessary mounting hardware for the front of your 2007-2018 Jeep Wrangler JK or JKU.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003cspan\u003eMaterial 3\/16 steel\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003e2 inch flare\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003eShips raw steel. Must be painted or powder coated to prevent rust.  See (\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/blogs\/first-blog\/steel-it?_pos=3\u0026amp;_sid=2ef388d16\u0026amp;_ss=r\" target=\"_blank\"\u003eSteel-It\u003c\/a\u003e)\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eProudly Made in the USA:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCrafted with precision and pride in the United States, ensuring the highest quality and supporting American manufacturing.\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eInner fender not included\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eFits 2007-2018 Jeep Wrangler JK or JKU front\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003eWeight: 44lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eRelated Products:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003cspan\u003eFront inner fenders part number MB1070\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1075-2_-_Shipping_0e9e6b77-3e9d-4a79-949b-b65b17d9b6ee.pdf?v=1630532343\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1075_-_Installation_Instructions.pdf?v=1588274703\" class=\"btn\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32084111786068,"sku":"MB1075-2","price":669.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB1075-Pair-1.jpg?v=1590186143"},{"product_id":"light-mount-for-jk-tag-mount-mb1044","title":"Tailgate Light Mount for MB1044 - fits Jeep JK","description":"\u003cp\u003eAdd reverse or rear mounted lighting to your Jeep JK!\u003c\/p\u003e\r\n\u003cp\u003eThe Motobilt MB2130 Light Mount is a simple \u0026amp; quick addition to your\u003cspan\u003e \u003c\/span\u003eMotobilt MB1044 Jeep JK Spare Tire Delete Kit with Tag Mount. This item does not include Tag Mount Part # MB1044.\u003c\/p\u003e\r\n\u003cp\u003eConstructed from 3\/16” high grade steel that is laser cut \u0026amp; precision CNC press brake formed, this sturdy light mount can accommodate various styles of Cube Lights as well as small Light Bars.  It is designed to perfectly fit with the upper Four (4) factory mounting holes of the spare tire carrier mount.\u003c\/p\u003e\r\n\u003cp\u003eThis part ships raw steel \u0026amp; reuses the factory spare tire carrier mounting hardware.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB2130_-_Shipping.pdf?v=1588778446\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Raw Steel","offer_id":32084373536852,"sku":"MB2130","price":20.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coated","offer_id":32084373569620,"sku":"MB2130-P","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB2130_-_Image_01.png?v=1590188089"},{"product_id":"jeep-jk-jku-vacuum-pump-relocation-bracket","title":"Vacuum Pump Relocation Bracket for Jeep JK\/JKU","description":"\u003cp\u003eMotobilt offers a Jeep JK Vacuum Pump Relocation Bracket. When mounting an aftermarket bumper or winch on your Jeep JK or JK Unlimited it may be necessary to relocate the factory vacuum pump from the front cross - member. We have designed a bracket for the Jeep JK 2012-present that relocates your vacuum pump to under the hood in the engine compartment.\u003c\/p\u003e\r\n\u003cp\u003eThe bracket is CNC cut from 11 gauge aluminum plate and features the Motobilt Logo. Bracket will ship bare metal and include wires, 4 butt connectors and 6mm metric bolts to bolt the vacuum pump to our bracket. The bracket attaches to the Jeep JK using factory bolts.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep JK Vacuum Pump Relocation Bracket\u003c\/li\u003e\r\n\u003cli\u003eFits Jeep JK or JK Unlimited 2012-2018\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eShips bare aluminum and includes wires, 4 butt connectors and 6mm metric bolts\u003c\/li\u003e\r\n\u003cli\u003eThe factory bracket will need to be cut flush with the frame when installing a Motobilt bumper.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB2060_-_Shipping_0c9fd91b-c9d4-4503-80ca-fd9f5e831221.pdf?v=1627581395\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions  \u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB2060-Vacuum-Pump-Relocation-Bracket-installation-instructions.pdf?v=1597328346\" class=\"btn\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32087620943956,"sku":"MB2060","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb2060-1.jpg?v=1654540286"},{"product_id":"jk-fuel-pump-extension-kit","title":"In Tank Fuel Pump Extension Kit for Jeep JK\/JKU","description":"\u003cp\u003eWant to reuse your factory Jeep JK\/JKU fuel pump\/sending unit in a different depth of tank? We have the solution!\u003cbr\u003e\u003cbr\u003eThis kit allows you to modify the overall depth of the factory fuel pump while still keeping all of the factory functionality of the fuel system.\u003cbr\u003e\u003cbr\u003eThis kit was developed to work seamlessly with our MB5032 tank \u0026amp; MB5013 tank. Each compatible Motobilt tank has a different tank depth, which is also a different tank depth than the factory tank.\u003cbr\u003e\u003cbr\u003eThe kit includes a pair of longer steel rods perfectly sized \u0026amp; professionally CNC machined to replace the existing steel rods that connect the upper portion of the factory fuel pump to its base. Also included are longer electrical wires to extend the length of the wiring harness that connects the upper portion to the base. We provide comprehensive detailed assembly instructions to guide you this simply but important modification.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBenefits\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1. Stability. The factory fuel pump should remain in contact with the bottom of your aftermarket tank. This helps with the physical stability of the fuel pump by preventing it from being suspended within the tank. This provides longevity of the fuel pump \u0026amp; helps prevent it from becoming damaged from movement.\u003cbr\u003e\u003cbr\u003e2. Accurate \"EMPTY\" Fuel Level. The fuel level float connected to the base of the fuel pump is best positioned to read when it is located low in the aftermarket tank. It's most important to know when you are about to run out of fuel. An unmodified fuel pump (not extended) when used in a deeper aftermarket tank will only read the fuel level at a higher point in the tank \u0026amp; your fuel gauge will appear to read EMPTY when there is actually plenty of fuel left in your aftermarket tank. Extending the factory fuel pump provides a more accurate fuel level reading for when fuel is low.\u003cbr\u003e\u003cbr\u003e3. Reliability. By reusing your modified fuel pump in your aftermarket fuel tank, you ensure you will not receive DTC engines codes, have the same functionality as factory \u0026amp; have the correct fuel pressure to your factory engine (as opposed to replacing your factory fuel pump with an aftermarket fuel pump).\u003cbr\u003e\u003cbr\u003e4. Cost. You save money by NOT having to replace your perfectly good factory fuel pump with an aftermarket fuel pump.\u003cbr\u003e\u003cbr\u003e5. Reuse Factory O-Ring Seal. No need to mess around with different types of fuel sealants or some hard-to-find aftermarket seal or gasket. This kit reuses the factory o-ring seal that comes with your existing make \u0026amp; model of Jeep JK or JKU from 2007 thru 2018. If you ever need to replace the o-ring seal, you simply replace it with the factory Mopar part.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5015_-_Shipping_a05c8565-24e0-4362-a456-10f2987847e7.pdf?v=1666098611\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5015_-_Assembly_Instructions.pdf?v=1666098612\" class=\"btn\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cdiv class=\"video-responsive\"\u003e\u003cspan\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/mxddKsXqEUc\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/div\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32087946264660,"sku":"MB5015","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB5015-view-1.jpg?v=1590186169"},{"product_id":"jeep-jk-jku-high-clear-rear-inner-fenders","title":"High Clearance Rear Inner Fender Kit for Jeep JKU","description":"\u003cp\u003eDesigned to work seamlessly with our MB3025 Jeep JK-JKU Back Half Kit along with our MB1546 Rear Upper Shock Towers, the Motobilt MB5516 Jeep JK-JKU High Clear Rear Inner Fenders provide a finished \u0026amp; sealed solution in the rear cargo tub area.\u003cbr\u003e\u003cbr\u003eThis multi-piece kit is constructed using durable 14 Ga steel that is precision laser cut \u0026amp; accurately CNC press brake formed. We have provided 1\/4\" diameter holes throughout the formed parts to plug weld the inner fenders in place.\u003cbr\u003e\u003cbr\u003eWe include removable cover plates to easily access the upper shock mounting holes. These cover plates are fastened using stainless steel button head screws (included). We have even pre-installed rivnuts to mount the cover plates to facilitate initial installation \u0026amp; future access to the shock mounting bolts.\u003cbr\u003e\u003cbr\u003eThe inner fenders are precisely scribed to accurately fit into the existing Jeep JK-JKU body resulting in a professional \u0026amp; clean looking installation.\u003cbr\u003e\u003cbr\u003eThis kit requires cutting \u0026amp; removal of sheet metal. Welding is required. Parts ship as bare metal.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWeight: 60 lbs (approx.)\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eRecommended parts\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cp\u003e\u003cspan\u003eYou can adapt your \u003c\/span\u003e\u003ca href=\"https:\/\/motobilt.com\/products\/jku-roll-cage-kit\" target=\"_blank\" data-mce-href=\"https:\/\/motobilt.com\/products\/jku-roll-cage-kit\"\u003eMB3033 JKU Cage Kit\u003c\/a\u003e\u003cspan\u003e to fit our MB1546 Highline Rear Inner Fenders by using this C \u0026amp; D Pillar Plate Kit. \u003c\/span\u003e\u003ca href=\"https:\/\/motobilt.com\/products\/jku-cage-c-d-plates-for-rear-highline-inner-fenders?variant=39624651702356\" target=\"_blank\"\u003ePart number MB3076\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cp\u003e\u003cstrong\u003eNotes:  Stock rear seats on 2013 and newer will not fit with out modifications. \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5516_-_Shipping.pdf?v=1717430027\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5516_-_Assembly_Instructions_4.pdf?v=1717428273\" class=\"btn\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32087969890388,"sku":"MB5516","price":549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB5516_-_Image_01.png?v=1587754514"},{"product_id":"dual-rear-shock-towers","title":"Dual Rear Coilover Bypass Shock Towers","description":"\u003cp\u003eThe Motobilt MB1546 Dual Rear Shock Towers were designed \u0026amp; developed as a dual rear shock mount solution to be used in conjunction with our MB3025 Jeep JK Back Half Kit. These rear shock towers can also be used as a solution for other custom builder projects where a dual shock mount is required.\u003cbr\u003e\u003cbr\u003ePrecision laser cut from 1\/4” high grade American steel \u0026amp; professionally CNC press brake formed, the MB1546 Dual Rear Shock Towers feature ample space to mount 2.5 Series coil over shocks, dampening shocks or even bypass shocks. The shock spacing is 5” center to center with 12.0mm diameter shock mounting holes (can be drilled at home to 1\/2” diameter if your project requires).\u003cbr\u003e\u003cbr\u003eWe have included oversized bolt access holes for easy tool access \u0026amp; shock bolt removal.\u003cbr\u003e\u003cbr\u003eThis item ships as unwelded \u0026amp; unfinished. Welding required. Sold as a pair.\u003c\/p\u003e\r\n\u003cp\u003eWeight: 61 lbs (approx.)\u003cbr\u003e\u003cbr\u003eSee our measured drawing in the photos above for additional details \u0026amp; features.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1546_-_Customer.pdf?v=1588274688\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32088015798356,"sku":"MB1546","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB1546DualRearShockTowers-view-2.jpg?v=1587754467"},{"product_id":"dual-front-lower-shock-mounts-sd60","title":"Super Duty Dana 60 Dual Lower Shock Mount Kit","description":"\u003cp\u003eDesigned for the custom builder, the Motobilt MB1547 Dual Front Lower Shock Mounts provide a great solution for the mounting of dual front shocks on a Ford Super Duty Dana 60 front axle.\u003c\/p\u003e\r\n\u003cp\u003eMade from 1\/4” high grade American steel \u0026amp; professionally CNC press brake formed, these shock mounts offer a quick easy solution to the lower mounting of a pair of dual front shocks.  We have included a positioning slot in these brackets which align with a threaded hole in the Upper C’s on a late model Ford Super Duty front axle.  Simply drop in a bolt (not included) to precisely position the lower shock mounts parts prior to welding them on to your Axles Inner C’s.\u003c\/p\u003e\r\n\u003cp\u003eThe position of these shock mounts places the front lower shocks above the axle, to the furthest most point possible from the center of the vehicle for added stability \u0026amp; to utilize as much of the shock travel as possible for increased wheel travel \u0026amp; axle droop.  The position also gives you the assurance there will be no interference with wheels, brakes, tie rods or other vital suspension components.  We’ve taken out all the guess work.\u003c\/p\u003e\r\n\u003cp\u003e12.0mm diameter mounting holes are for 2.5 Series coil over shocks, dampening shocks or bypass shocks.  Holes can be drilled out larger at home, if required for your application.  5” center to center shock spacing.\u003c\/p\u003e\r\n\u003cp\u003eThis item is shipped as unwelded \u0026amp; unfinished.  Welding required.  Sold as pairs.  \u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb1547_-_shipping.pdf?v=1660745706\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32088140611668,"sku":"MB1547","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/IMG_0357.jpg?v=1587754971"},{"product_id":"jeep-jk-jku-aluminum-fuel-cell-with-steel-skid-for-back-half-kit","title":"Aluminum Fuel Cell w\/ Skid Plate for MB3025 Back Half Kit - fits Jeep JK\/JKU","description":"\u003cp\u003eThe Motobilt Jeep JK\/JKU Aluminum Fuel Cell with Steel Skid is a premium solution for relocating the factory fuel tank on a Jeep JK (2 door) or Jeep JKU (4 door) from the passenger center of the vehicle to the rear when you are looking to add space for a true triangulated 4 link rear suspension.\u003cbr\u003e\u003cbr\u003eDesigned specifically to function seamlessly with our MB3025 Jeep JK\/JKU Back Half Kit, this aluminum fuel cell system simply bolts in place \u0026amp; makes the process of building a fully custom Jeep JK\/JKU easy \u0026amp; fast. Our complete fuel tank system was expertly designed using the latest in 3D CAD technology to ensure a perfect fit. (ONLY FITS THE MOTOBILT JK\/JKU BACK HALF FRAME KIT. IT WILL NOT FIT A FACTORY FRAME.)\u003cbr\u003e\u003cbr\u003eThe 20.9 Gallon (79 liter) capacity tank is constructed from 1\/8” aluminum that is precision CNC laser cut \u0026amp; accurately CNC press brake formed. The formed aluminum tank is professionally TIG welded \u0026amp; includes a CNC machined fuel pump mount which features an o-ring groove engineered for the factory Jeep JK\/JKU fuel pump seal (Mopar #55366298AA – sold separately) for fuel tight \u0026amp; leak free connection. We’ve also included CNC machined aluminum bungs for the fuel filler \u0026amp; fuel filler vent. The tank accepts your factory Jeep JK\/JKU fuel pump assembly (Mopar #68065575AC – sold separately). \u003cbr\u003e\u003cbr\u003eThe front side of tank \u0026amp; skid plate features a recess which is engineered to clearance your differential cover for larger axles under full suspension compression. The rear of the skid plate is angled to increase your departure angle. The aluminum tank is separated from contacting the steel skid by 1\/8” thick neoprene rubber which dampens vibrations, prevents galvanic corrosion between dissimilar metals \u0026amp; eliminates rubbing, scratches \u0026amp; rattling. We also include three (3) bolt-on rubber bumpers at the rear of the tank which simply bolt into preinstalled threaded bungs on our MB3025 JK\/JKU Back Half Kit. These rubber bumpers act as a cushion \u0026amp; eliminate vibration \u0026amp; rattling.\u003cbr\u003e\u003cbr\u003eThe heavy duty 100% American made high strength steel skid plate protects your aluminum tank from rocks \u0026amp; trail abuse. The skid plate features weep holes on all four corners to allow mud \u0026amp; debris to be flushed.\u003cbr\u003e\u003c\/p\u003e\r\n\u003cp\u003eWe have included the Motobilt \u003cspan\u003eIn Tank Fuel Pump Extension Kit for Jeep JK\/JKU with this fuel cell (see product components). There is no need to purchase it separately. \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThe new tank is deeper than factory, so the gauge will read that it is full much longer than normal, but when it truly is empty the gauge will be accurate.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eWeight = 80lbs\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFOR OFF-ROAD USE ONLY. \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5013_-_Shipping_d300cf0f-fa55-4cc4-add0-b71c2598712a.pdf?v=1699892785\" class=\"btn\" target=\"_blank\"\u003eTo See What Is Included Then Click Here\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5013_-_Assembly_Instructions_f01f63b5-21b8-4803-888f-f29e4b7bf832.pdf?v=1699892788\" class=\"btn\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32088169087060,"sku":"MB5013","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB5013--Assembled-View-2.jpg?v=1590186129"},{"product_id":"jl-jk-tailgate-accessory-mount","title":"Tailgate Accessory Mount for Jeep JK \/ JKU\/ JL","description":"\u003cp\u003eThe Motobilt MB1115 JL-JK Tail Gate Accessory Mount is designed to replace your factory spare tire carrier on a Jeep tailgate to provide multiple mounting locations for bolt-on accessories.\u003cbr\u003e\u003cbr\u003eConstructed from 1\/8” thick high strength steel, this mount is CNC laser cut \u0026amp; CNC precision press brake formed. The shape of the mount adds extra strength, rigidity, ease of adding bolt-on parts, clears the hinges of Jeep models JL \u0026amp; JK and gives you peace of mind knowing your accessories are securely positioned for even the toughest of off road driving.\u003cbr\u003e\u003cbr\u003eOur mounting bolt pattern fits the Factory tire carrier bolt hole locations on the tailgates of Jeep models JL \u0026amp; JK, 2 door or 4 door. We have included long slots which match the bolt pattern for Rotopax Pack Mounts allowing you bolt-on a huge selection of Rotopax’s patented rotoformed gasoline, diesel, water \u0026amp; storage containers to place them in multiple mounting positions, including double stacking containers for additional fuel, water or storage capacity. You can easily add up to 8 gallons of fuel for extended driving range or add extra drinking water storage for camping\/overlanding trips with your friends.\u003cbr\u003e\u003cbr\u003eWe have also included 50 bolt holes for adding other types of bolt-on accessories including Quick Fist clamps, Cube Lights, Light bars or anything else you can think of. You can easily bolt-on a license plate\/tag and add an aftermarket LED license plate\/tag light like those offered from ORO (Off Road Only). We have included cut outs to pass wiring through for lights or CB antenna coaxial cables.\u003cbr\u003e\u003cbr\u003eThis Accessory Mount is not just limited to Jeeps. It can be installed on just about any flat surface. It can be mounted inside the bed of a truck, installed on a pick-up truck tailgate, attached to a roll cage, installed in a UTV, mounted in boats, mounted inside or outside of a cargo trailer, emergency vehicles, first aid stations or bolted to wall. The mounting possibilities are limited only by your imagination.\u003cbr\u003e\u003cbr\u003eThe types of accessories \u0026amp; products you can attach include shovels, axes, fire extinguishers, flags, fishing rods, lights, license plate\/tag, bottle opener, recovery rope, cooler, Hi-Lift Jack, fuel\/water\/storage containers, camping\/overlanding accessories, plus more!\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/motobilt.com\/products\/license-plate-relocator-light-mount-for-jk-jl\"\u003eMB1129- License Plate Relocator\/Light Mount for JK-JL\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eShips raw steel. Must be painted or powder coated to prevent rust.  See (\u003ca href=\"https:\/\/motobilt.com\/blogs\/first-blog\/steel-it?_pos=3\u0026amp;_sid=2ef388d16\u0026amp;_ss=r\" rel=\"noopener\" target=\"_blank\"\u003eSteel-It\u003c\/a\u003e)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eWeight = 8.2 lbs\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb1115_-_shipping.pdf?v=1660829912\" rel=\"noopener noreferrer\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32088208801876,"sku":"MB1115","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB1115-tailgate-accessory-mount-view-1.jpg?v=1587754977"},{"product_id":"jeep-jk-jku-fuel-access-hatch","title":"Fuel Cell Access Hatch for Jeep JK\/JKU","description":"\u003cp\u003eThe Motobilt MB5019 JK\/JKU Rear Fuel Tank Access Hatch Kit provides convenient access to the fuel pump \u0026amp; connections when relocating fuel tank to the rear on your modified Jeep JK or JKU.  This premium builder kit is designed to function seamlessly with our other builder kits including MB3025 Jeep JK\/JKU Back Half Kit \u0026amp; MB5013 Jeep JK\/JKU Aluminum Fuel Cell with Steel Skid for Back Half Kit.\u003c\/p\u003e\r\n\u003cp\u003eThe factory location of the fuel tank on a Jeep JK or JKU is less than ideal when seeking to install a 4 link rear suspension.  When you make the leap to relocating your passenger side mounted factory fuel tank to a rear mounted aluminum fuel tank in a Jeep JK\/JKU, one of the issues is easy access to your fuel pump.\u003c\/p\u003e\r\n\u003cp\u003eOur MB5019 kit is the solution.  Our kit provides you with a topside removable access hatch located at the rear center interior of the bed area of a JK\/JKU.  No need to crawl under your vehicle \u0026amp; drop the gas tank.  You simply unscrew twelve (12) #10-24 stainless steel screws \u0026amp; presto!  Instant access to your fuel pump!\u003c\/p\u003e\r\n\u003cp\u003eThis kit is constructed from 14 Ga (0.075” thick) steel that is precision laser cut \u0026amp; includes a flush mounted \u0026amp; removable access hatch plate, along with a large bed area cover plate.  We have inset the access hatch plate so it sits perfectly flush \u0026amp; provided you with preinstalled rivnuts making the removal of the access hatch easy to do from the topside.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eThis kit requires cutting into the floor of the bed area.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e This product ships unwelded \u0026amp; unfinished, so you can paint any color to match your vehicle.\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cp\u003e\u003cstrong\u003eWeight = 10lbs\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5019_-_Customer.pdf?v=1588779051\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5019_-_Assembly_Instructions.pdf?v=1646088191\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32088247500884,"sku":"MB5019","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB5019-view-1.jpg?v=1590186161"},{"product_id":"jeep-jl-jlu-jk-jku-interior-cargo-rack","title":"Interior Cargo Rack for Jeep JL \/ JLU \/ JK \/ JKU","description":"\u003cp\u003e\u003cspan\u003eThe Motobilt JL\/JLU\/JK\/JKU Cargo Rack System is a great raised storage solution for your Jeep JL, JLU,JK,JKU\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eCargo racks come either powder coated black or bare metal \u0026amp; include assembly hardware.\u003c\/span\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eConstructed from 14 Ga CNC laser cut \u0026amp; CNC press brake formed high grade steel, the 5.6 cu. ft. Cargo Tray measures 40\"W x 20\"L x 2.5\"D.  The Cargo Tray features multiple tie down locations for safely securing your cargo over even the roughest of trails.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003cspan\u003eThe Jeep JL\/JLU\/JK\/JKU factory roll cage \u0026amp; rear seat location differs slightly than previous model years of Jeep Wranglers, thus, we have specifically sized this JL\/JLU\/JK\/JKU Cargo Rack to maximize the raised storage space available.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003cspan\u003eRated at 200 lb carrying capacity, the Motobilt JL\/JLU\/JK\/JKU Cargo Rack System is one of the strongest \u0026amp; highest rated carrying capacity cargo racks available on the market, thus, you have the assurance that your heavy extra cargo will be secure.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003cspan\u003eWe've included four bolt-on corner reinforcements, which are functional for added corner strength \u0026amp; add an extra custom styling cue to your vehicle.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003cspan\u003eThe adjustable Universal Mounting Beams are constructed using 11 Ga high grade CNC laser cut \u0026amp; CNC formed steel.  The Mounting Beams can be mounted with a hard top, with a soft top (UP position) or without a top at all.  The Mounting Beams reuses your factory top mounting locations \u0026amp; factory hardware \u0026amp; can be positioned in multiple locations for adjustability.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eFor the 4 Door Jeep JK, the Cargo Rack system easily mounts just behind the rear seat, allowing you to use the rear seat in either the \"up\" position or folded \"down\" for added storage.\u003c\/p\u003e\r\n\u003cp\u003e \u003cspan\u003eThe Mounting Beams also include extra tie down points \u0026amp; extra mounting holes to bolt-on other accessories.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003cspan\u003eFor the 4 Door Jeep JLU, the Cargo Rack system easily mounts just behind the rear seat, allowing you to use the rear seat in either the \"up\" position or folded \"down\" for added storage.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003cspan\u003eFor the 2 Door Jeep JL\/JK, the Cargo Rack can be mounted with the rear seat folded in the \"down\" position only or with the rear seat removed\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNOTES\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eHardTop-This will work with a hard top as well but has to be mounted after the hard top is installed and will need to be removed to take the top off and reinstalled.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003eWeight: 60lbs (approx.)\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003eRelated Products\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/motobilt.com\/products\/motobed-tire-carrier-rack-cargo-rack-basket-adapter\" target=\"_blank\"\u003eMB5069 Cargo Rack Basket Adapter\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5018_-_Shipping.pdf?v=1660759320\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5018_Assembly_0.pdf?v=1588274690\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Raw Steel","offer_id":32088475828308,"sku":"MB5018","price":369.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coated","offer_id":32088475861076,"sku":"MB5018-P","price":479.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB5014Image01_1.png?v=1631107398"},{"product_id":"seat-belt-bung-weld-in","title":"Seat Belt Mounting Bung for Round Tube","description":"\u003cp\u003eThe Motobilt steel seat belt bungs are used most often for the shoulder mount of your seat belt but can be used for a variety of reasons.  These are designed to fit 1.75\" or 2” tubing by simply drilling a through hole and the lip on the end of the bung keeps the bung from pulling through. These need to be welded on both ends. The thread is 7\/16\" fine thread.  \u003c\/p\u003e\r\n\u003cp\u003eSold as 1 each\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32088661688404,"sku":"MB5514","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB5514-4.jpg?v=1589582540"},{"product_id":"jeep-jk-tail-gate-plate-07-18-wrangler-jk","title":"Tailgate Plate for Jeep JK \/ JKU - Steel","description":"\u003cp\u003eThe Motobilt JK Tag plate kit installs to give you a clean look for when you delete your spare tire. It utilizes 3 holes for the AC vent while giving you that clean slick Motobilt look! The Motobilt JK Tag plate kit bolts in place of the factory spare tire mount on both the 4 door and 2 door. The kit ships bare metal and reuses the factory hardware. The part is fabricated from 14 GA steel plate. Some people refer to this part as a tramp stamp. Installing the JK Tag plate kit requires removal of the stock air vent flaps, so the tag plate kit may sit flat against the tailgate for a slick appearance.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep JK tailgate plate\u003c\/li\u003e\r\n\u003cli\u003eBare metal when shipped\u003c\/li\u003e\r\n\u003cli\u003eFabricated from 14 GA steel plate\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Hardware is not included. This product reuses the factory hardware. \u003c\/p\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1007-S_-_Shipping.pdf?v=1624630459\" target=\"_blank\"\u003eProduct Components \u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32088701370452,"sku":"MB1007-S","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1007-a-View-1_1200x1200_3df2b1e3-652b-4071-964c-c37e58532aa4.webp?v=1689352935"},{"product_id":"jeep-jk-micro-rear-bumper-w-light-bar-cut-out-07-18-wrangler-jk-bare-steel","title":"Micro Series Rear Bumper w\/ Light Mount for Jeep JK \/ JKU","description":"\u003cp\u003eThe Motobilt Jeep JK Micro rear bumper is CNC cut and formed out of 3\/16 inch plate. Four holes in bumper are to clear the hit bolts because it fits tightly to the frame. Micro bumper has a cut out for a 20 inch single row light bar designed for a light bar measuring 21.5 inch wide at the mounting surface.\u003c\/p\u003e\r\n\u003cp\u003eBumper does clear factory style receiver hitch. You will have to slightly trim off the frame on the back. Only minimal trimming required in a way where if you want to change bumpers in the future, it will not hinder other bumper fitment. Ships bare metal so you can paint or powdercoat the color of your choice.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep JK micro rear bumper with LED light bar mount\u003c\/li\u003e\r\n\u003cli\u003eCNC cut and formed out of 3\/16 inch plate\u003c\/li\u003e\r\n\u003cli\u003eCut out for a 20 inch single row light bar\u003c\/li\u003e\r\n\u003cli\u003eD-ring mounts available separately.  See related parts tab.\u003c\/li\u003e\r\n\u003cli\u003eLight Bar Mounts Available - Select option to purchase with bumper\u003c\/li\u003e\r\n\u003cli\u003eHardware not included\u003c\/li\u003e\r\n\u003cli\u003eSold as each\u003c\/li\u003e\r\n\u003cli\u003eWeight: 35lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eShips bare metal, paint or powdercoat needed before use\u003c\/li\u003e\r\n\u003cli\u003eMotobilt Jeep JK Micro Rear Bumper Cover is designed to be used with Motobilt Jeep JK Rear D-Ring mounts\u003c\/li\u003e\r\n\u003cli\u003ePurchase PN MB2072 if you require D Ring mounts.  See related parts tab.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eDisclaimer:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eBumper laws vary from state to state. Please ensure rear bumper requirements in your area. Offroad use only. Not designed to be run with a spare tire.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1039_-_Customer.pdf?v=1588274688\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Bumper Only","offer_id":39298471821396,"sku":"MB1039","price":309.0,"currency_code":"USD","in_stock":true},{"title":"Bumper w\/Optional Light Bar Brackets","offer_id":39298471854164,"sku":"MB1039-1039-3","price":309.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB1040-4.jpg?v=1589582533"},{"product_id":"jeep-jk-front-bumper-w-stinger-07-18-wrangler-jk-hatchet-series-bare-steel","title":"Hatchet Series Front Frame Chop Bumper w\/Stinger for Jeep JK  \/ JKU","description":"\u003cp\u003eThe Motobilt Hatchet Jeep JK Front Bumper with Stinger is an ultra-slim design for the front of your Jeep JK. The Hatchet is available in a few different configurations. This Hatchet configuration includes a stinger made from 1.75-inch DOM steel tube with integrated gussets. It has holes to mount your winch. The Hatchet includes 3\/4-inch-thick steel D-Ring mounts that pass through the bumper and our welded inside and out for superior strength. The Hatchet is a total of 41-inch wide which allows for closer approach angles.  This is a frame chop design bumper.  The front frame horns have to be cut off approximately 2\"s and the bottom crash bar has to be completely cut off and removed from the frame.  The areas that need to be cut are shown in the pictures.  Also, holes will have to be drilled through the frame rails in order to mount the bumper to the Jeep.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eHatchet Jeep JK front bumper with stinger\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eFrame Modification Required:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eInstallation necessitates cutting of the frame, ensuring a perfect fit and superior performance.\u003c\/li\u003e\r\n\u003cli\u003eStinger made from 1.75-inch DOM steel tube with integrated gussets.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eWinch:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eOur winch bumper is designed to fit a standard mounting pattern of 10\" x 4.5\" and has been tested with the Warn VR EVO and Zeon series winches. It may also fit other untested winches.\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eSway Bar Compatibility: \u003c\/strong\u003eWorks with all factory sway bars including Rubicon and works with Anti-Rock as well.\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eApproach angle increased by moving bumper in 2 inches.\u003c\/li\u003e\r\n\u003cli\u003eShips raw metal so you can customize to your needs.\u003c\/li\u003e\r\n\u003cli\u003e3\/4-inch-thick steel d-ring mounts\u003c\/li\u003e\r\n\u003cli\u003eHatchet is 41 inches wide.\u003c\/li\u003e\r\n\u003cli\u003eHardware included.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eProudly Made in the USA:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCrafted with precision and pride in the United States, ensuring the highest quality and supporting American manufacturing.\u003c\/li\u003e\r\n\u003cli\u003eSold as each.\u003c\/li\u003e\r\n\u003cli\u003eWeight: 52lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eFits:\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep Wrangler JK \/ JKU 2007-2018\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eShips raw steel. Must be painted or powder coated to prevent rust.  See (\u003ca href=\"https:\/\/motobilt.com\/blogs\/first-blog\/steel-it?_pos=3\u0026amp;_sid=2ef388d16\u0026amp;_ss=r\" rel=\"noopener\" target=\"_blank\"\u003eSteel-It\u003c\/a\u003e)\u003c\/li\u003e\r\n\u003cli\u003e2012 and newer Jeep JK frame modification required, and vacuum pump relocation is required PN MB2060\u003c\/li\u003e\r\n\u003cli\u003eIf installing a winch, MB1002 fair lead mount will also need to purchase\u003c\/li\u003e\r\n\u003cli\u003eYour frame ends and crash bar must be\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ecut off and holes drilled \u003c\/strong\u003e\u003c\/span\u003ethrough the frame rails.  Does not use any factory holes.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1048-S_-_Shipping_1.pdf?v=1628024470\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1048_-_Assembly_Instructions.pdf?v=1628023110\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32089650823252,"sku":"MB1048-S","price":529.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb1048-s-1.jpg?v=1587754507"},{"product_id":"jeep-jk-front-bumper-w-stinger-fog-cutouts-07-18-wrangler-jk-hatchet-series-bare-steel","title":"Hatchet Series Front Frame Chop Bumper w\/ Stinger and Fog Mounts for Jeep JK \/ JKU","description":"\u003cp\u003eThe Motobilt Hatchet Jeep JK Front Bumper is an ultra-slim design for the front of your Jeep JK. The Hatchet is available in a few different configurations. This Hatchet configuration features integrated factory or aftermarket LED fog lights and a stinger option. The Hatchet is a total of 41-inch wide which allows for closer approach angles.  This is a frame chop design bumper.  The front frame horns have to be cut off approximately 2\"s and the bottom crash bar has to be completely cut off and removed from the frame.  The areas that need to be cut are shown in the pictures.  Also, holes will have to be drilled through the frame rails in order to mount the bumper to the Jeep.\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eHatchet Jeep JK front bumper with stinger and Fog cutouts\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eFrame Modification Required:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eInstallation necessitates cutting of the frame, ensuring a perfect fit and superior performance.\u003c\/li\u003e\r\n\u003cli\u003eApproach angle increased by moving bumper in 2 inches.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eWinch:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eOur winch bumper is designed to fit a standard mounting pattern of 10\" x 4.5\" and has been tested with the Warn VR EVO and Zeon series winches. It may also fit other untested winches.\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eFog Light\u003c\/strong\u003e holes for factory fog lights.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eSway Bar Compatibility: \u003c\/strong\u003eWorks with all factory sway bars including Rubicon and works with Anti-Rock as well.\u003c\/li\u003e\r\n\u003cli\u003eShips raw metal so you can customize to your needs.\u003c\/li\u003e\r\n\u003cli\u003eIncludes 3\/4-inch-thick steel d-ring mounts.\u003c\/li\u003e\r\n\u003cli\u003eTotal of 41 inch wide\u003c\/li\u003e\r\n\u003cli\u003eHardware included.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eProudly Made in the USA:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCrafted with precision and pride in the United States, ensuring the highest quality and supporting American manufacturing.\u003c\/li\u003e\r\n\u003cli\u003eSold as each.\u003c\/li\u003e\r\n\u003cli\u003eWeight: 70lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eFits:\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep Wrangler JK \/ JKU 2007-2018\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eShips raw steel. Must be painted or powder coated to prevent rust.  See (\u003ca href=\"https:\/\/motobilt.com\/blogs\/first-blog\/steel-it?_pos=3\u0026amp;_sid=2ef388d16\u0026amp;_ss=r\" rel=\"noopener\" target=\"_blank\"\u003eSteel-It\u003c\/a\u003e)\u003c\/li\u003e\r\n\u003cli\u003eIf installing a winch, MB1002 fair lead mount will also need to purchase.\u003c\/li\u003e\r\n\u003cli\u003e2012 and newer models requires frame modification and vacuum pump relocation in Jeep JK\u003c\/li\u003e\r\n\u003cli\u003eYour frame ends and crash bar must be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ecut off and holes drilled\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethrough the frame rails. Does not use any factory holes.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1048F-S_-_Shipping_1.pdf?v=1628024470\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1048_-_Assembly_Instructions.pdf?v=1628023110\" class=\"btn\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32089663897684,"sku":"MB1048F-S","price":589.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb1048f-s-1.jpg?v=1587754509"},{"product_id":"hammer-jeep-jk-bumper-w-stinger-and-fog-lights","title":"Hammer Front Bumper w\/stinger and fog lights for Jeep JK \/ JKU","description":"\u003c!--[difficulty:2]--\u003e\r\n\u003cp\u003eThe Motobilt Jeep JK Front the Hammer Bumper is a 48.5-inch wide, sleek, tight-fitting design proudly made in the USA. Our JK The Hammer Bumper is 3D CAD designed to ensure the best possible fit to your Jeep JK. The bumper will fit all year models of the Jeep JK 2 door and 4 door JK Unlimited. The front d-ring mounts are CNC cut from 3\/4-inch-thick steel plate and pass through the bumper where they weld to the bumper mounting plates in addition to the bumper body. This was done for added strength to the recovery point.\u003c\/p\u003e\r\n\u003cp\u003eThe Hammer bumper has provisions to mount the factory fog lights or aftermarket LED fog lights. We have pre-installed riv nuts for 10-24 screws in the factory bolt pattern. The Hammer bumper can be run with or without the optional skid plate. To install the skid plate, you have to trim approx. 1 inch off each side of the crash bars. If you remove the skid plate later, the part that you trimmed will not be seen. The ends of the Hammer bumper taper up for tire clearance. Each cut in the bumper was intentional to keep it tight to the frame rail for a better approach angle. The main construction of the bumper is fabricated from 3\/16-inch-thick high strength steel plate. The bumper also serves as a winch mount. The top side of the JK The Hammer Bumper has bolt holes for a recovery winch.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep JK The Hammer 48.5-inch front bumper with stinger\u003c\/li\u003e\r\n\u003cli\u003eFits all year models of the Jeep JK 2 door and 4 door JK Unlimited\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eWinch:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eOur winch bumper is designed to fit a standard mounting pattern of 10\" x 4.5\" and has been tested with the Warn VR EVO and Zeon series winches. It may also fit other untested winches.\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eFabricated from 3\/16-inch-thick high strength steel plate.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eBolt on\u003c\/strong\u003e design.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eSway Bar Compatibility: \u003c\/strong\u003eWorks with all factory sway bars including Rubicon and works with Anti-Rock as well.\u003c\/li\u003e\r\n\u003cli\u003e3\/4-inch-thick steel d-ring mounts\u003c\/li\u003e\r\n\u003cli\u003ePass through d-ring mounts weld to the bumper.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eFog Light\u003c\/strong\u003e holes for factory fog lights.\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003ePre-installed riv nuts for 10-24 screws in the factory bolt pattern.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eProudly Made in the USA:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eCrafted with precision and pride in the United States, ensuring the highest quality and supporting American manufacturing.\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eSold as each.\u003c\/li\u003e\r\n\u003cli\u003eWeight: 80lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eFits:\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep Wrangler JK \/ JKU 2007-2018\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eIf installing a winch, MB1002 or MB1141 fairlead mount will also need to purchase.\u003c\/li\u003e\r\n\u003cli\u003eShips raw steel. Must be painted or powder coated to prevent rust.  See (\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/blogs\/first-blog\/steel-it?_pos=3\u0026amp;_sid=2ef388d16\u0026amp;_ss=r\" target=\"_blank\"\u003eSteel-It\u003c\/a\u003e)\u003c\/li\u003e\r\n\u003cli\u003eNo cutting required on the frame rails on your Jeep JK\u003c\/li\u003e\r\n\u003cli\u003eThe two outside top bolt holes on your frame need to be drilled out to 9\/16 inch.\u003c\/li\u003e\r\n\u003cli\u003e2012 and newer models will need a vacuum relocation pump bracket PN MB2060\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003ca href=\"https:\/\/motobilt.com\/products\/jeep-jk-front-bumper-skid-plate-07-18-wrangler-jk-the-hammer\" style=\"color: #ff2a00;\" target=\"_blank\"\u003eSkid plate sold separately.\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb1025_-_shipping.pdf?v=1660686055\" rel=\"noopener noreferrer\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1025_-_Assembly_Instructions.pdf?v=1698766510\" class=\"btn\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32089685983316,"sku":"MB1025F-S","price":839.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb1025-s-1_1.jpg?v=1587754505"},{"product_id":"jeep-jk-front-bumper-w-stinger-and-grill-hoop-07-18-wrangler-jk-the-hammer-series-bare-steel","title":"Hammer Front Bumper w\/Grill Hoop, Stinger \u0026 Fog Mounts for Jeep JK \/ JKU","description":"\u003c!--[difficulty:2]--\u003e\r\n\u003cp\u003eThe Motobilt Jeep JK Front the Hammer Bumper with grill hoop and fog mounts is a 48.5-inch wide, sleek, tight-fitting design proudly made in the USA. Our JK The Hammer Bumper is 3D CAD designed to ensure the best possible fit to your Jeep JK. \u003cspan\u003eThe grill hoop, stinger, and connecting tubes are made out of 1.75-inch x .120-inch wall DOM tube. \u003c\/span\u003eThe bumper will fit all year models of the Jeep JK 2 door and 4 door JK Unlimited. The front d-ring mounts are CNC cut from 3\/4-inch-thick steel plate and pass through the bumper where they weld to the bumper mounting plates in addition to the bumper body. This was done for added strength to the recovery point.\u003c\/p\u003e\r\n\u003cp\u003eThe Hammer bumper has provisions to mount the factory fog lights or aftermarket LED fog lights. We have pre-installed riv nuts for 10-24 screws in the factory bolt pattern. The Hammer bumper can be run with or without the optional skid plate. To install the skid plate, you have to trim approx. 1 inch off each side of the crash bars. If you remove the skid plate later, the part that you trimmed will not be seen. The ends of the Hammer bumper taper up for tire clearance. Each cut in the bumper was intentional to keep it tight to the frame rail for a better approach angle. The main construction of the bumper is fabricated from 3\/16-inch-thick high strength steel plate. The bumper also serves as a winch mount. The top side of the JK The Hammer Bumper has bolt holes for a recovery winch.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep JK The Hammer 48.5-inch front bumper with stinger and grill hoop\u003c\/li\u003e\r\n\u003cli\u003eFits all year models of the Jeep JK 2 door and 4 door JK Unlimited\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eWinch Compatibility:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSpecially designed for seamless integration with the Warn VR Evo and Zeon series winches, with potential compatibility with other manufacturers.\u003c\/li\u003e\r\n\u003cli\u003eFabricated from 3\/16-inch-thick high strength steel plate.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eBolt on\u003c\/strong\u003e design.\u003c\/li\u003e\r\n\u003cli\u003e3\/4-inch-thick steel d-ring mounts\u003c\/li\u003e\r\n\u003cli\u003eConnecting tubes are made out of 1.75-inch x .120-inch wall DOM tube.\u003c\/li\u003e\r\n\u003cli\u003ePass through d-ring mounts weld to the bumper.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eFog Light \u003c\/strong\u003eholes for factory fog lights.\u003c\/li\u003e\r\n\u003cli\u003ePre-installed riv nuts for 10-24 screws in the factory bolt pattern.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eSway Bar Compatibility: \u003c\/strong\u003eWorks with all factory sway bars including Rubicon and works with Anti-Rock as well..\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eProudly Made in the USA:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCrafted with precision and pride in the United States, ensuring the highest quality and supporting American manufacturing.\u003c\/li\u003e\r\n\u003cli\u003eSold as each.\u003c\/li\u003e\r\n\u003cli\u003eWeight: 90lbs (approx.)\u003cstrong\u003e \u003c\/strong\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eFits:\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep Wrangler JK \/ JKU 2007-2018\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eIf installing a winch, MB1002 or MB1141 fairlead mount will also need to purchase.\u003c\/li\u003e\r\n\u003cli\u003eShips raw steel. Must be painted or powder coated to prevent rust.  See (\u003ca href=\"https:\/\/motobilt.com\/blogs\/first-blog\/steel-it?_pos=3\u0026amp;_sid=2ef388d16\u0026amp;_ss=r\" rel=\"noopener\" target=\"_blank\"\u003eSteel-It\u003c\/a\u003e)\u003c\/li\u003e\r\n\u003cli\u003eNo cutting required on the frame rails on your Jeep JK\u003c\/li\u003e\r\n\u003cli\u003eThe two outside top bolt holes on your frame need to be drilled out to 9\/16 inch.\u003c\/li\u003e\r\n\u003cli\u003e2012 and newer models will need a vacuum relocation pump bracket PN MB2060\u003c\/li\u003e\r\n\u003cli\u003eSkid plate sold separately.\u003c\/li\u003e\r\n\u003cli\u003eLED fog lights NOT included.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" rel=\"noopener noreferrer\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb1025_-_shipping.pdf?v=1660686055\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1025_-_Assembly_Instructions.pdf?v=1698766510\" class=\"btn\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32089766428756,"sku":"MB1025F-L","price":1079.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb1025-l-1.jpg?v=1587754504"},{"product_id":"jeep-jk-front-bumper-07-18-wrangler-jk-w-fog-light-holes-the-hammer-series-bare-steel","title":"Hammer Front Bumper W\/Fog Mount for Jeep JK \/ JKU","description":"\u003c!--[difficulty:2]--\u003e\r\n\u003cp\u003eMotobilt now offers the Jeep JK the Hammer front bumper. It features built in provisions for factory style fog lights. The Motobilt Jeep JK Front the Hammer Bumper is a 48.5-inch wide, sleek, tight-fitting design proudly made in the USA. Our JK The Hammer Bumper is 3D CAD designed to ensure the best possible fit to your Jeep JK. The bumper will fit all year models of the Jeep JK 2 door and 4 door JK Unlimited. The front d-ring mounts are CNC cut from 3\/4-inch-thick steel plate and pass through the bumper where they weld to the bumper mounting plates in addition to the bumper body. This was done for added strength to the recovery point.\u003c\/p\u003e\r\n\u003cp\u003eThe Hammer bumper has provisions to mount the factory fog lights or aftermarket LED fog lights. We have pre-installed riv nuts for 10-24 screws in the factory bolt pattern. The Hammer bumper can be run with or without the optional skid plate. To install the skid plate, you have to trim approx. 1 inch off each side of the crash bars. If you remove the skid plate later, the part that you trimmed will not be seen. The ends of the Hammer bumper taper up for tire clearance. Each cut in the bumper was intentional to keep it tight to the frame rail for a better approach angle. The main construction of the bumper is fabricated from 3\/16-inch-thick high strength steel plate. The bumper also serves as a winch mount. The top side of the JK The Hammer Bumper has bolt holes for a recovery winch.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep JK The Hammer 48.5-inch front bumper\u003c\/li\u003e\r\n\u003cli\u003eFits all year models of the Jeep JK 2 door and 4 door JK Unlimited\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eWinch:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eOur winch bumper is designed to fit a standard mounting pattern of 10\" x 4.5\" and has been tested with the Warn VR EVO and Zeon series winches. It may also fit other untested winches.\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eFabricated from 3\/16-inch-thick high strength steel plate.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eBolt on\u003c\/strong\u003e design.\u003c\/li\u003e\r\n\u003cli\u003e3\/4-inch-thick steel d-ring mounts\u003c\/li\u003e\r\n\u003cli\u003ePass through d-ring mounts weld to the bumper.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eFog Light\u003c\/strong\u003e Holes for factory fog lights.\u003c\/li\u003e\r\n\u003cli\u003ePre-installed riv nuts for 10-24 screws in the factory bolt pattern.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eProudly Made in the USA:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCrafted with precision and pride in the United States, ensuring the highest quality and supporting American manufacturing.\u003c\/li\u003e\r\n\u003cli\u003eSold as each.\u003c\/li\u003e\r\n\u003cli\u003eWeight: 70lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eFits:\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep Wrangler JK \/ JKU 2007-2018\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eIf installing a winch, MB1002 fairlead mount will also need to purchased.\u003c\/li\u003e\r\n\u003cli\u003eShips raw steel. Must be painted or powder coated to prevent rust.  See (\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/blogs\/first-blog\/steel-it?_pos=3\u0026amp;_sid=2ef388d16\u0026amp;_ss=r\" target=\"_blank\"\u003eSteel-It\u003c\/a\u003e)\u003c\/li\u003e\r\n\u003cli\u003eNo cutting required on the frame rails on your Jeep JK\u003c\/li\u003e\r\n\u003cli\u003eThe two outside top bolt holes on your frame need to be drilled out to 9\/16 inch.\u003c\/li\u003e\r\n\u003cli\u003e2012 and newer models will need a vacuum relocation pump bracket PN MB2060 The factory bracket will need to be cut off to clear the additional mounting plates.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cspan style=\"color: #ff2a00;\"\u003e\u003ca href=\"https:\/\/motobilt.com\/products\/jeep-jk-front-bumper-skid-plate-07-18-wrangler-jk-the-hammer\" style=\"color: #ff2a00;\" target=\"_blank\"\u003eSkid plate sold separately\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\r\n\u003cli\u003eLED fog light NOT included.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb1025_-_shipping.pdf?v=1660686055\" rel=\"noopener noreferrer\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1025_-_Assembly_Instructions.pdf?v=1698766510\" class=\"btn\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32089783631956,"sku":"MB1025F","price":689.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb1025-6.jpg?v=1587754503"},{"product_id":"jeep-jk-front-bumper-w-grill-hoop-and-stinger-07-18-wrangler-jk-crusher-series-bare-steel","title":"Crusher Front Bumper w\/Grill Hoop and Stinger for Jeep JK \/ JKU","description":"\u003c!--[difficulty:2]--\u003e\r\n\u003cp\u003eThe Motobilt Jeep Wrangler JK Crusher recessed winch bumper with grill hoop and stinger will provide you the ultimate in protection and recovery. The bumper allows you to secure your winch down low in between the frame rails. The grill hoop, stinger, and connecting tubes are made out of 1.75 inch x .120 inch wall DOM tube. The high clearance design includes a built in skid plate also. The bumper is made from 3\/16 inch thick steel plate that is laser cut at Motobilt HQ then cnc bent. The bumper uses 3\/4 inch thick laser cut d-ring mounts that pass through the bumper and are welded both inside and out. This setup provides for superior strength.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep Wrangler JK front Crusher recessed winch bumper with grill hoop and stinger\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eWinch:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eOur winch bumper is designed to fit a standard mounting pattern of 10\" x 4.5\" and has been tested with the Warn VR EVO and Zeon series winches. It may also fit other untested winches.\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eMeasures in at just 46.5 inch at its widest point\u003c\/li\u003e\r\n\u003cli\u003e3\/16 inch thick steel plate\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eBolt on\u003c\/strong\u003e design.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eSway Bar Compatibility: \u003c\/strong\u003eWorks with all factory sway bars including Rubicon and works with Anti-Rock as well.\u003c\/li\u003e\r\n\u003cli\u003e3\/4 inch thick laser cut d-ring mounts that pass through the bumper and are welded both inside and out\u003c\/li\u003e\r\n\u003cli\u003eConnecting tubes are made out of 1.75 inch x .120 inch wall DOM tube\u003c\/li\u003e\r\n\u003cli\u003eIncludes all the necessary mounting hardware\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003cli\u003eWeight = 95lbs (approx.)\u003c\/li\u003e\r\n\u003cli\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWill Not work with Teraflex S\/T Dual rate front sway bar\u003c\/li\u003e\r\n\u003cli\u003eThe outer edge of the crash bar will need to be trimmed to fit where the lower portion of the bumper mounts\u003c\/li\u003e\r\n\u003cli\u003eThe 8 factory mounting holes may need to be open up to a 9\/16\".\u003c\/li\u003e\r\n\u003cli\u003eShips bare metal\u003c\/li\u003e\r\n\u003cli\u003e2012 and newer models will need a vacuum relocation pump. PN MB2060\u003c\/li\u003e\r\n\u003cli\u003ePrevious models of this bumper may ship with a fairlead spacer.\u003c\/li\u003e\r\n\u003cli\u003eDoes NOT work with \u003cstrong\u003eSuper Winch EXP\u003c\/strong\u003e \u003cstrong\u003eor Offset winches such as the Warn 9.5 TI series.\u003c\/strong\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1011_-_Customer_221efea6-9230-4452-817e-590854949fa0.pdf?v=1666643714\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1011_-_Assembly_Instructions_2.pdf?v=1717778713\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32089883934804,"sku":"MB1011-L","price":1079.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/50612207_1984146784973105_1897481525914501120_o.jpg?v=1587754448"},{"product_id":"jeep-jk-front-bumper-w-stinger-07-18-wrangler-jk-crusher-series-bare-steel","title":"Crusher Front Bumper w\/Stinger for Jeep JK \/ JKU","description":"\u003c!--[difficulty:2]--\u003e\r\n\u003cp\u003eThe Motobilt Jeep Wrangler JK Crusher recessed winch bumper with stinger will provide you the ultimate in protection and recovery. The bumper allows you to secure your winch down low in between the frame rails. The stinger bar is made out of 1.75-inch x .120-inch wall DOM tube and is braced with laser cut gussets. The high clearance design includes a built-in skid plate. The bumper is made from 3\/16-inch-thick steel plate that is laser cut at Motobilt HQ then CNC bent. The bumper uses 3\/4-inch-thick laser cut d-ring mounts that pass through the bumper and are welded both inside and out. This setup provides for superior strength.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eFits 2007 and Newer Jeep JK2 door and 4 door JK Unlimited\u003c\/li\u003e\r\n\u003cli\u003eJeep Wrangler JK front Crusher recessed winch bumper with stinger\u003c\/li\u003e\r\n\u003cli\u003eThe stinger bar is made out of 1.75-inch x .120-inch wall DOM tube and braced with laser cut gussets.\u003c\/li\u003e\r\n\u003cli\u003eMeasures 46.5\"s wide at widest point.\u003c\/li\u003e\r\n\u003cli\u003eRecessed Winch\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eWinch:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eOur winch bumper is designed to fit a standard mounting pattern of 10\" x 4.5\" and has been tested with the Warn VR EVO and Zeon series winches. It may also fit other untested winches.\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eFabricated From 3\/16\" Thick High Strength Steel Plate\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eBolt on\u003c\/strong\u003e design.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eSway Bar Compatibility: \u003c\/strong\u003eWorks with all factory sway bars including Rubicon and works with Anti-Rock as well.\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e3\/4-inch-thick laser cut d-ring mounts that pass through the bumper and are welded both inside and out\u003c\/li\u003e\r\n\u003cli\u003eIncludes all the necessary mounting hardware.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eProudly Made in the USA:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCrafted with precision and pride in the United States, ensuring the highest quality and supporting American manufacturing.\u003c\/li\u003e\r\n\u003cli\u003eSold as each.\u003c\/li\u003e\r\n\u003cli\u003eWeight: 84lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWill Not work with Teraflex S\/T Dual rate front sway bar.\u003c\/li\u003e\r\n\u003cli\u003eThe outer edge of the crash bar will need to be trimmed to fit where the lower portion of the bumper mounts.\u003c\/li\u003e\r\n\u003cli\u003eThe 8 factory mounting holes may need to be open up to a 9\/16\".\u003c\/li\u003e\r\n\u003cli\u003eShips raw steel.  Must be painted or powder coated to prevent rust. See (\u003ca href=\"https:\/\/motobilt.com\/blogs\/first-blog\/steel-it?_pos=3\u0026amp;_sid=d366c9466\u0026amp;_ss=r\" rel=\"noopener\" target=\"_blank\"\u003eSteel-It\u003c\/a\u003e)\u003c\/li\u003e\r\n\u003cli\u003e2012 and newer models will need a vacuum relocation pump PN MB2060.  The factory bracket must be cut off in order for the winch plate to fit.\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003ePrevious versions of this bumper may ship with fairlead spacer.\u003c\/li\u003e\r\n\u003cli\u003eDoes \u003cstrong\u003eNOT\u003c\/strong\u003e work with \u003cstrong\u003eSuper Winch EXP or Offset winches such as the Warn 9.5 TI series.\u003c\/strong\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1011_-_Customer_221efea6-9230-4452-817e-590854949fa0.pdf?v=1666643714\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1011_-_Assembly_Instructions_2.pdf?v=1717778713\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32089898713172,"sku":"MB1011-S","price":839.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB1011-S.jpg?v=1587754449"},{"product_id":"jk-cam-delete-plates-front-lower-control-arms-07-18-jk","title":"CAM Bolt Delete Plates for Jeep JK \/ JKU Front Lower Axle Links","description":"\u003cp\u003eThe Motobilt JK Cam Delete Plates allow you to eliminate the slotted factory holes that use a cam bolt.  If your running aftermarket adjustable arms you do not need cam bolts and you can eliminate the weak slots.  These plates come in a set of 4 which allows you to weld both sides of the control arm brackets for both the passenger and driver side. \u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMaterial 3\/16 steel\u003c\/li\u003e\r\n\u003cli\u003eIncludes 4 plates\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32089963823188,"sku":"MB2114","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB2114.jpg?v=1589581334"},{"product_id":"jeep-tj-lj-aluminum-fuel-cell-19-gallon-package-97-06-wrangler-tj-tj-unlimited","title":"19 Gallon Fuel Cell Package for Jeep TJ \/ LJ","description":"\u003cp\u003eMotobilt MB5010-TJ-3010-5007 offers a solution for relocating the fuel tank in your Jeep TJ, LJ, JK, or JKU. The Motobilt MB5010-TJ\/LJ was designed to use the stock Jeep TJ, LJ, JK, or JKU fuel pump and designed to fit in the back bed of your Jeep. It is 30 x 12 x 12 inch. This will Not fit behind your seat. The tank has a capacity of roughly 18.7 US gallons. The Motobilt fuel tank is CNC cut from 1\/8 inch aluminum and formed on a press brake, is TIG welded for ultimate strength and includes a large D-ring style cap. This can be converted to remote fill by purchasing a different filler neck system\u003cspan\u003e that utilizes a \u003c\/span\u003e\u003cspan\u003e12 bolt, 5.38 bolt circle flange\u003c\/span\u003e. The Motobilt fuel cell mount and fuel pump claming ring are included.\u003c\/p\u003e\r\n\u003cp\u003eThe mount consists of three parts the main under tank plate and two clamp bodies. The under tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate. You can weld your own mounting brackets to the bottom if needed or utilize the 8 bolt holes already in the mount. The 2 clamp down bodies capture the top and all four sides of the tank and bolt securely to the mounting base. These parts are CNC Laser Cut but from 18 gauge steel. The parts are formed on a hydraulic press break. This mount will ensure your fuel cell is mounted securely.\u003c\/p\u003e\r\n\u003cp\u003eThe Motobilt tank features one fitting on top of the with a 90 degree roll over valve and barbed hose fitting.  A 2nd -8 AN fitting has been added for the 2005-2006 models as they require a return line.   Older model TJ's will simply cap this fitting off as its not needed on the early models.  The MB5010-TJ Fuel Cell already has the provisions for the clamping ring cnc cut into the tank. This means the clamping ring and pump will bolt in with no cutting or drilling necessary! \u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eWhen installing the fuel cap assembly, we recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the contact surfaces.\u003c\/strong\u003e\u003c\/span\u003e This is a sealant we have used in the shop numerous times over the years for sealing filler caps on fuel cells.\u003c\/p\u003e\r\n\u003cp\u003eThis fuel cell is used for applications where you are extending the wheel base and the rear axle would contact the factory fuel tank. It would also be used in situations where more ground clearance is needed. This kit works perfectly with the Motobilt Jeep TJ Back Half kit or Motobilt Jeep LJ back half kit, where the frame rails are moved up and in for ultimate clearance.  \u003cspan data-mce-fragment=\"1\"\u003eThis can also be installed in the back of your Jeep XJ\/JK\/JKU for custom applications.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eFuel tank in your Jeep TJ, LJ, XJ, JK or JKU\u003c\/li\u003e\r\n\u003cli\u003eSteel mount\u003c\/li\u003e\r\n\u003cli\u003eFuel pump clamping ring\u003c\/li\u003e\r\n\u003cli\u003e30 inch x12 inch x 12 inch\u003c\/li\u003e\r\n\u003cli\u003eRoughly 18.7 US gallons capacity\u003c\/li\u003e\r\n\u003cli\u003e1 Tig welded threaded insert with 90 degree brass rollover valve with barbed fitting. \u003cspan data-mce-fragment=\"1\"\u003e1\/2 NPT thread. The hose barb is 5\/16\".\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e1 Tig welded -8 AN fitting for return line on 2005-2006 Jeeps. Earlier models will cap off this fitting.\u003c\/li\u003e\r\n\u003cli\u003eCNC cut from 1\/8 inch aluminum\u003c\/li\u003e\r\n\u003cli\u003ePress brake formed\u003c\/li\u003e\r\n\u003cli\u003eTIG welded for ultimate strength\u003c\/li\u003e\r\n\u003cli\u003eIncludes a large D-ring style cap\u003c\/li\u003e\r\n\u003cli\u003eUnder tank plate is CNC Laser Cut from 1\/8 inch high strength steel plate\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight = 40lbs\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThis Fuel Cell Does Not mount in between the frame rails. It will only mount inside the bed of the Jeep\u003c\/li\u003e\r\n\u003cli\u003eA stock Jeep JK\/JKU fuel pump will fit into this tank. \u003c\/li\u003e\r\n\u003cli\u003eThis Fuel Cell Does Not fit behind the factory seat\u003c\/li\u003e\r\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eWe recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the fuel filler cap assembly as the gasket can deteriorate due to ethanol.  \u003c\/strong\u003e\u003c\/li\u003e\r\n\u003cli\u003e2006 TJ fuel pump requires the factory plastic to be slightly trimmed to fit the clamping ring.\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eWhen routing vent hose from the brass roll over valve be sure to loop the hose all the way around the tank before exiting out underneath the Jeep. If running Evap this is the same hose that you will tie into that system.\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eFOR OFF-ROAD USE ONLY. \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5010-TJ_-_Customer.pdf?v=1588274691\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5007_-_Installation_Instructions.pdf?v=1660242137\" target=\"_blank\"\u003eInstallation Instructions (MB5007)\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5036_-_Shipping_13aef956-0ef9-4021-a65b-0c5d91091594.pdf?v=1763494465\" target=\"_blank\"\u003eFiller \u0026amp; Neck Cap Assembly\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32090169704532,"sku":"MB5010-TJ-3010-5007","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/5010-TJ-3010-5007.jpg?v=1587754359"},{"product_id":"transmission-cross-member-jeep-jk-2012-2017","title":"Transmission Cross Member for Jeep JK \/ JKU 2012-2018","description":"\u003cp\u003eThe Motobilt Transmission Cross Member for 2012-2017 Jeep JK is the solution to your weak factory cross member. The factory Jeep JK cross members are a known weak point as they will flex or bow up while ontop of an obstacle off road. The thin material can also dent quite easily. The Motobilt cross member is built to take the abuse a true trail rated Jeep can throw at it.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e3\/16 inch laser cut and cnc bent steel plate design\u003c\/li\u003e\r\n\u003cli\u003eLayered design provides 3\/8 inch of material at the most stressfull points\u003c\/li\u003e\r\n\u003cli\u003eWorks with factory components or the Motobilt skid plate system.\u003c\/li\u003e\r\n\u003cli\u003eComplete bolt in design\u003c\/li\u003e\r\n\u003cli\u003eWeight: 30lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB3023_-_Shipping.pdf?v=1629494952\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32090189758548,"sku":"MB3023","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb3023-1.jpg?v=1587754985"},{"product_id":"high-lift-jack-mount","title":"Motobilt HiLift Jack Mount","description":"\u003cp\u003eThe new Motobilt High Lift Jack Mount is the perfect heavy duty way to mount your jack.  *Will not work with Farm Jacks.*\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1085_-_Customer.pdf?v=1705345629\"\u003eDimensions \u0026amp; Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e3\/16 inch laser cut \u0026amp; cnc formed steel plate design\u003c\/li\u003e\r\n\u003cli\u003eMultiple mouting holes \u003c\/li\u003e\r\n\u003cli\u003eBolts directly onto Motobilt Jeep JK tire carrier mount part number MB1084\u003c\/li\u003e\r\n\u003cli\u003eOptional universal or Jeep specific mounts availble\u003c\/li\u003e\r\n\u003cli\u003eTight tolerance rattle free design\u003c\/li\u003e\r\n\u003cli\u003eSmall footprint design allows it to fit almost anywhere.\u003c\/li\u003e\r\n\u003cli\u003eDoes NOT work with JL tire carrier MB1089\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight = 8lbs\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eHardware not included\u003c\/li\u003e\r\n\u003cli\u003eHigh lift jacks with a stamped steel base may need to be trimmed as they are slightly larger then the cast mounts\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e \u003c\/span\u003eThe Motobilt HiLift Jack Mounts are designed to work with the \u003cspan style=\"text-decoration: underline; color: #ff2a00;\"\u003e\u003ca href=\"https:\/\/hi-lift.com\/hi-lift-jacks\/all-cast\/\" style=\"color: #ff2a00; text-decoration: underline;\" target=\"_blank\"\u003eAll-Cast Models\u003c\/a\u003e\u003c\/span\u003e. \u003c\/p\u003e\r\n\u003ch4\u003e\u003c\/h4\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32090212794452,"sku":"MB1085","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB1085-1.jpg?v=1587754886"},{"product_id":"jeep-jk-tire-carrier-07-17-wrangler-jk-up-to-37-inch-tire","title":"Spare Tire Carrier for Jeep JK \/ JKU","description":"\u003cp\u003eMotobilt introduces the Jeep JK and JKU 2007-2017 spare tire carrier.  This heavy duty tire carrier is a must have if you are running larger tires on your Jeep.  The stock setup is not equipped to handle the extra weight of a larger tire and wheel setup.  The new JK tire carrier was designed using cutting edge computer modeling software.  We laser cut, cnc form, and hand weld each unit to ensure it is perfect.  We also engineered it to install easily with basic hand tools.  Included are our provisions for our aftermarket high lift jack mount part number MB1085.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWeight: 58lbs (approx.)\u003c\/li\u003e\r\n\u003cli\u003e3\/16 inch laser cut and cnc formed steel\u003c\/li\u003e\r\n\u003cli\u003eCAD designed for perfect fit\u003c\/li\u003e\r\n\u003cli\u003eWill hold up to a 40” inch tire and a 37” with the high lift jack together if equipped.  \u003cspan\u003e3\/8\"-16 UNC Threads\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eCNC machine threaded inserts for Hi Lift Jack pre-installed.\u003c\/li\u003e\r\n\u003cli\u003e12 mounting points vs the factory 4 mounting points\u003c\/li\u003e\r\n\u003cli\u003eMultiple adjustments both vertically and front to back for optimal tire position.\u003c\/li\u003e\r\n\u003cli\u003eSame wheel lug size and thread as stock sizes\u003c\/li\u003e\r\n\u003cli\u003eLicense plate relocation kit MB2025 works perfectly with the mount.\u003c\/li\u003e\r\n\u003cli\u003eIntegrated design allows you to open and close easily with factory door handle.\u003c\/li\u003e\r\n\u003cli\u003eWill work with factory bumper or aftermarket bumpers. \u003c\/li\u003e\r\n\u003cli\u003eGreasable mounting bolts at pivot points on hinges\u003c\/li\u003e\r\n\u003cli\u003eDelrin hinge bushings with steel inner liners\u003c\/li\u003e\r\n\u003cli\u003eIncludes necessary mounting hardware.\u003c\/li\u003e\r\n\u003cli\u003eIncludes hardware\u003c\/li\u003e\r\n\u003cli\u003eWill not work with 3rd brake light in stock location \u003c\/li\u003e\r\n\u003cli\u003eThread Size: 3\/8-16 weld nuts qty (2) for accessories such as a Hi Lift Jack\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003e\u003cb\u003eOur tires carriers are designed to fit a wheel backspacing of 4.25\" to 5.5\" with tires larger than stock.  If you need a larger wheel backspacing, you can add a wheel spacer (not included).\u003c\/b\u003e\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003cbr\u003eEasy to open and close\u003cbr\u003eEasy to bolt on Motobilt accessories\u003cbr\u003eIncreased load capacity through additional mounting points.\u003cbr\u003eAdjustable tire position allows clearance for up to a 40 inch tire.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eRelated Parts-NOT included\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSpare Tire Tag Relocation Mount PN# \u003ca href=\"https:\/\/f21qwcdahc3xlbwq-27148736.shopifypreview.com\/products\/spare-tire-tag-relocation-kit\" rel=\"noopener\" target=\"_blank\"\u003eMB2025\u003c\/a\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eHigh Lift Jack Mount PN# \u003ca href=\"https:\/\/f21qwcdahc3xlbwq-27148736.shopifypreview.com\/products\/high-lift-jack-mount?variant=32090212794452\" rel=\"noopener\" target=\"_blank\"\u003eMB1085\u003c\/a\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eTag Delete Plug for Jeep JK\/JKU PN# \u003ca href=\"https:\/\/f21qwcdahc3xlbwq-27148736.shopifypreview.com\/products\/tag-delete-plug-for-jeep-jk-jku?variant=41306426441812\" rel=\"noopener\" target=\"_blank\"\u003eMB8003\u003c\/a\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eCrusher Rear Bumper for JK\/JKU PN# \u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/jeep-jk-rear-bumper-07-18-wrangler-jk-crusher-series-bare-steel?variant=32108992594004\" target=\"_blank\"\u003eMB1072\u003c\/a\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eShips raw steel. Must be painted or powder coated to prevent rust.  See (\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/blogs\/first-blog\/steel-it?_pos=3\u0026amp;_sid=2ef388d16\u0026amp;_ss=r\" target=\"_blank\"\u003eSteel-It\u003c\/a\u003e)\u003c\/li\u003e\r\n\u003cli\u003eHigh lift jack mount NOT included but can be purchased separately. Part number MB1085.  Jack mount will fit with up to 37” tires.\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eFactory tailgate catch must be removed.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003eAfter market tail light covers may interfere when fully opened.\u003c\/li\u003e\r\n\u003cli\u003eWheel studs are 1\/2”-20\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1084_-_Customer_1.pdf?v=1588274689\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1084_Assembly_44665084-605e-4cd2-87f0-53d42d91bc58.pdf?v=1678801792\" class=\"btn\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cdiv class=\"video-responsive\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/0aArn3ySfFg\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32090232193108,"sku":"MB1084","price":669.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB1084-new-view-1.jpg?v=1660767114"},{"product_id":"jeep-jk-tire-carrier-with-hi-lift-jack-mount-07-17-wrangler-jk-up-to-37-inch-tire","title":"Spare Tire Carrier w\/ Hilift jack mount for Jeep JK \/ JKU","description":"\u003cp\u003eMotobilt introduces the Jeep JK and JKU 2007-2017 spare tire carrier with Hi Lift Jack Mount.  This heavy duty tire carrier is a must have if you are running larger tires on your Jeep.  The stock setup is not equipped to handle the extra weight of a larger tire and wheel setup.  The new JK tire carrier was designed using cutting edge computer modeling software.  We laser cut, cnc form, and hand weld each unit to ensure it is perfect.  We also engineered it to install easily with basic hand tools.  Included are our provisions for our aftermarket high lift jack mount part number MB1085.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWeight: 60lbs (approx.)\u003c\/li\u003e\r\n\u003cli\u003e3\/16 inch laser cut and cnc formed steel\u003c\/li\u003e\r\n\u003cli\u003eCAD designed for perfect fit\u003c\/li\u003e\r\n\u003cli\u003eWill hold up to a 37 inch tire and high lift jack together if equipped. Will hold a 40 inch tire w\/out jack mount. \u003cspan\u003e3\/8\"-16 UNC Threads\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eCNC machine threaded inserts for Hi Lift Jack pre-installed.\u003c\/li\u003e\r\n\u003cli\u003eHigh Lift Jack Mount Part number MB1085 included\u003c\/li\u003e\r\n\u003cli\u003e12 mounting points vs the factory 4 mounting points\u003c\/li\u003e\r\n\u003cli\u003eMultiple adjustments both vertically and front to back for optimal tire position.\u003c\/li\u003e\r\n\u003cli\u003eSame wheel lug size and thread as stock sizes\u003c\/li\u003e\r\n\u003cli\u003eLicense plate relocation kit MB2025 works perfectly with the mount.\u003c\/li\u003e\r\n\u003cli\u003eIntegrated design allows you to open and close easily with factory door handle.\u003c\/li\u003e\r\n\u003cli\u003eWill work with factory bumper or aftermarket bumpers. \u003c\/li\u003e\r\n\u003cli\u003eGreasable mounting bolts at pivot points on hinges\u003c\/li\u003e\r\n\u003cli\u003eDelrin hinge bushings with steel inner liners\u003c\/li\u003e\r\n\u003cli\u003eIncludes necessary mounting hardware for tire carrier only.\u003c\/li\u003e\r\n\u003cli\u003eJack hardware \u003cstrong\u003eNOT\u003c\/strong\u003e included. See thread size below\u003c\/li\u003e\r\n\u003cli\u003eThread Size: 3\/8-16 weld nuts qty (2) for accessories such as a Hi Lift Jack\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003e\u003cb\u003eOur tires carriers are designed to fit a wheel backspacing of 4.25\" to 5.5\" with tires larger than stock.  If you need a larger wheel backspacing, you can add a wheel spacer (not included).\u003c\/b\u003e\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003cbr\u003eEasy to open and close\u003cbr\u003eEasy to bolt on Motobilt accessories\u003cbr\u003eIncreased load capacity through additional mounting points.\u003cbr\u003eAdjustable tire position allows clearance for up to a 37 inch tire with jack mount installed and up to a 40 inch tire without jack mount installed. \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eRelated Parts-NOT included\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSpare Tire Tag Relocation Mount PN# \u003ca rel=\"noopener\" href=\"https:\/\/f21qwcdahc3xlbwq-27148736.shopifypreview.com\/products\/spare-tire-tag-relocation-kit\" target=\"_blank\"\u003eMB2025\u003c\/a\u003e\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eTag Delete Plug for Jeep JK\/JKU PN# \u003ca rel=\"noopener\" href=\"https:\/\/f21qwcdahc3xlbwq-27148736.shopifypreview.com\/products\/tag-delete-plug-for-jeep-jk-jku?variant=41306426441812\" target=\"_blank\"\u003eMB8003\u003c\/a\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eCrusher Rear Bumper for JK\/JKU PN# \u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/jeep-jk-rear-bumper-07-18-wrangler-jk-crusher-series-bare-steel?variant=32108992594004\" target=\"_blank\"\u003eMB1072\u003c\/a\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eShips raw steel. Must be painted or powder coated to prevent rust.  See (\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/blogs\/first-blog\/steel-it?_pos=3\u0026amp;_sid=2ef388d16\u0026amp;_ss=r\" target=\"_blank\"\u003eSteel-It\u003c\/a\u003e)\u003c\/li\u003e\r\n\u003cli\u003eAfter market tail light covers may interfere when fully opened.\u003c\/li\u003e\r\n\u003cli\u003eWheel studs are 1\/2” - 20\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1084_-_Customer_1.pdf?v=1588274689\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1084_Assembly_44665084-605e-4cd2-87f0-53d42d91bc58.pdf?v=1678801792\" class=\"btn\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cdiv class=\"video-responsive\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/0aArn3ySfFg\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32090233602132,"sku":"MB1084-1085","price":779.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB1084--hi-lift-new-view-1.jpg?v=1660768839"},{"product_id":"jeep-jk-tire-carrier-07-17-wrangler-jk-up-to-37-inch-tire-8-lug","title":"Spare Tire Carrier for Jeep JK \/JKU- 8x6.5","description":"\u003cp\u003eMotobilt introduces the Jeep JK and JKU 2007-2017 spare tire carrier for 8 x 6.5\" wheel bolt pattern.  With many people now swapping in 1 ton axles into their Jeep we now offer this version of the tire carrier to use the popular 8 x 6.5\" bolt pattern..  This heavy duty tire carrier is a must have if you are running larger tires on your Jeep.  The stock setup is not equipped to handle the extra weight of a larger tire and wheel setup.  The new JK tire carrier was designed using cutting edge computer modeling software.  We laser cut, cnc form, and hand weld each unit to ensure it is perfect.  We also engineered it to install easily with basic hand tools.  Included are our provisions for our aftermarket high lift jack mount part number MB1085.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWeight: 60lbs (approx.)\u003c\/li\u003e\r\n\u003cli\u003e8 x 6.5 inch wheel lug pattern.\u003c\/li\u003e\r\n\u003cli\u003e3\/16 inch laser cut and cnc formed steel\u003c\/li\u003e\r\n\u003cli\u003eCAD designed for perfect fit\u003c\/li\u003e\r\n\u003cli\u003eWill hold up to a 40 inch tire and up to a 37 inch tire with high lift jack together if equipped. \u003cspan\u003e3\/8\"-16 UNC Threads\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eCNC machine threaded inserts for Hi Lift Jack pre-installed.\u003c\/li\u003e\r\n\u003cli\u003e12 mounting points vs the factory 4 mounting points\u003c\/li\u003e\r\n\u003cli\u003eMultiple adjustments both vertically and front to back for optimal tire position.\u003c\/li\u003e\r\n\u003cli\u003eSame wheel lug size and thread as stock sizes\u003c\/li\u003e\r\n\u003cli\u003eLicense plate relocation kit MB2025 works perfectly with the mount.\u003c\/li\u003e\r\n\u003cli\u003eIntegrated design allows you to open and close easily with factory door handle.\u003c\/li\u003e\r\n\u003cli\u003eWill work with factory bumper or aftermarket bumpers. \u003c\/li\u003e\r\n\u003cli\u003eGreasable mounting bolts at pivot points on hinges\u003c\/li\u003e\r\n\u003cli\u003eDelrin hinge bushings with steel inner liners\u003c\/li\u003e\r\n\u003cli\u003eIncludes necessary mounting hardware.\u003c\/li\u003e\r\n\u003cli\u003eIncludes hardware\u003c\/li\u003e\r\n\u003cli\u003eWill not work with 3rd brake light in stock location \u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight = 56lbs\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003e\u003cb\u003eOur tires carriers are designed to fit a wheel backspacing of 4.25\" to\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e5.5\" with tires larger than stock.  If you need a larger wheel backspacing, you can add a wheel spacer (not included).\u003c\/b\u003e\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003cbr\u003eEasy to open and close\u003cbr\u003eEasy to bolt on Motobilt accessories\u003cbr\u003eIncreased load capacity through additional mounting points.\u003cbr\u003eAdjustable tire position allows clearance for up to a 40 inch tire.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eRelated Parts-NOT included\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSpare Tire Tag Relocation Mount PN# \u003ca rel=\"noopener\" href=\"https:\/\/f21qwcdahc3xlbwq-27148736.shopifypreview.com\/products\/spare-tire-tag-relocation-kit\" target=\"_blank\"\u003eMB2025\u003c\/a\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eHigh Lift Jack Mount PN# \u003ca rel=\"noopener\" href=\"https:\/\/f21qwcdahc3xlbwq-27148736.shopifypreview.com\/products\/high-lift-jack-mount?variant=32090212794452\" target=\"_blank\"\u003eMB1085\u003c\/a\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eTag Delete Plug for Jeep JK\/JKU PN# \u003ca rel=\"noopener\" href=\"https:\/\/f21qwcdahc3xlbwq-27148736.shopifypreview.com\/products\/tag-delete-plug-for-jeep-jk-jku?variant=41306426441812\" target=\"_blank\"\u003eMB8003\u003c\/a\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eShips raw steel. Must be painted or powder coated to prevent rust.  See (\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/blogs\/first-blog\/steel-it?_pos=3\u0026amp;_sid=2ef388d16\u0026amp;_ss=r\" target=\"_blank\"\u003eSteel-It\u003c\/a\u003e)\u003c\/li\u003e\r\n\u003cli\u003eHigh lift jack mount NOT included but can be purchased separately. Part number MB1085.  With jack mount installed the largest tire that will fit is 37 inches. \u003c\/li\u003e\r\n\u003cli\u003eAfter market tail light covers may interfere when fully opened.\u003c\/li\u003e\r\n\u003cli\u003eWheel studs are 9\/16”-18\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1084_-_Shipping.pdf?v=1752689413\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1084_Assembly_44665084-605e-4cd2-87f0-53d42d91bc58.pdf?v=1678801792\" class=\"btn\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cdiv class=\"video-responsive\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/0aArn3ySfFg\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32090254639188,"sku":"MB1084-8LUG","price":669.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB1084-1_fa7c458e-0e90-48f5-967c-f265498bccff.jpg?v=1587754940"},{"product_id":"jeep-jk-tire-carrier-with-hi-lift-jack-mount-07-17-wrangler-jk-up-to-37-inch-tire-1","title":"Spare Tire Carrier 8 Lug Wheel w\/ HiLift Jack Mount for Jeep JK \/ JKU","description":"\u003cp\u003eMotobilt introduces the Jeep JK and JKU 2007-2017 spare tire carrier with Hi Lift Jack Mount 8 lug.  With many people now swapping in 1 ton axles into their Jeep we now offer this version of the tire carrier to use the popular 8 x 6.5 inch bolt pattern.  This heavy duty tire carrier is a must have if you are running larger tires on your Jeep.  The stock setup is not equipped to handle the extra weight of a larger tire and wheel setup.  The new JK tire carrier was designed using cutting edge computer modeling software.  We laser cut, cnc form, and hand weld each unit to ensure it is perfect.  We also engineered it to install easily with basic hand tools.  Included are our provisions for our aftermarket high lift jack mount part number MB1085.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWeight: 68lbs (approx.)\u003c\/li\u003e\r\n\u003cli\u003e8 x 6.5 inch wheel lug pattern.\u003c\/li\u003e\r\n\u003cli\u003e3\/16 inch laser cut and cnc formed steel\u003c\/li\u003e\r\n\u003cli\u003eCAD designed for perfect fit\u003c\/li\u003e\r\n\u003cli\u003eWill hold up to a 37 inch tire and high lift jack together if equipped. Will hold a 40 inch tire without the jack mount attached.  \u003cspan\u003e3\/8\"-16 UNC Threads Hardware NOT included\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eCNC machine threaded inserts for Hi Lift Jack pre-installed.\u003c\/li\u003e\r\n\u003cli\u003eHigh Lift Jack Mount Part number MB1085 included\u003c\/li\u003e\r\n\u003cli\u003e12 mounting points vs the factory 4 mounting points\u003c\/li\u003e\r\n\u003cli\u003eMultiple adjustments both vertically and front to back for optimal tire position.\u003c\/li\u003e\r\n\u003cli\u003eSame wheel lug size and thread as stock sizes\u003c\/li\u003e\r\n\u003cli\u003eLicense plate relocation kit MB2025 works perfectly with the mount.\u003c\/li\u003e\r\n\u003cli\u003eIntegrated design allows you to open and close easily with factory door handle.\u003c\/li\u003e\r\n\u003cli\u003eWill work with factory bumper or aftermarket bumpers. \u003c\/li\u003e\r\n\u003cli\u003eGreasable mounting bolts at pivot points on hinges\u003c\/li\u003e\r\n\u003cli\u003eDelrin hinge bushings with steel inner liners\u003c\/li\u003e\r\n\u003cli\u003eIncludes necessary mounting hardware for tire carrier.\u003c\/li\u003e\r\n\u003cli\u003eJack hardware NOT included.\u003c\/li\u003e\r\n\u003cli\u003eWill not work with 3rd brake light in stock location \u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003e\u003cb\u003eOur tires carriers are designed to fit a wheel backspacing of 4.25\" to 5.5\" with tires larger than stock.  If you need a larger wheel backspacing, you can add a wheel spacer (not included).\u003c\/b\u003e\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003cbr\u003eEasy to open and close\u003cbr\u003eEasy to bolt on Motobilt accessories\u003cbr\u003eIncreased load capacity through additional mounting points.\u003cbr\u003eAdjustable tire position allows clearance for up to a 40 inch tire.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eRelated Parts-NOT included\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSpare Tire Tag Relocation Mount PN# \u003ca href=\"https:\/\/f21qwcdahc3xlbwq-27148736.shopifypreview.com\/products\/spare-tire-tag-relocation-kit\" rel=\"noopener\" target=\"_blank\"\u003eMB2025\u003c\/a\u003e\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eTag Delete Plug for Jeep JK\/JKU PN# \u003ca href=\"https:\/\/f21qwcdahc3xlbwq-27148736.shopifypreview.com\/products\/tag-delete-plug-for-jeep-jk-jku?variant=41306426441812\" rel=\"noopener\" target=\"_blank\"\u003eMB8003\u003c\/a\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eNotes:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eShips raw steel. Must be painted or powder coated to prevent rust.  See (\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/blogs\/first-blog\/steel-it?_pos=3\u0026amp;_sid=2ef388d16\u0026amp;_ss=r\" target=\"_blank\"\u003eSteel-It\u003c\/a\u003e)\u003c\/li\u003e\r\n\u003cli\u003eWith jack mount installed the largest tire size that will fit is 37 inches.\u003c\/li\u003e\r\n\u003cli\u003eAfter market tail light covers may interfere when fully opened.\u003c\/li\u003e\r\n\u003cli\u003eWheel studs are 9\/16”-18\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1084-8LUG_-_Shipping.pdf?v=1752689413\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1084_Assembly_44665084-605e-4cd2-87f0-53d42d91bc58.pdf?v=1678801792\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cdiv class=\"video-responsive\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/0aArn3ySfFg\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32090265583700,"sku":"MB1084-8LUG-1085","price":779.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB1084-MB1085-1_1d9eaad4-8bf4-4697-96b3-304b502575e5.jpg?v=1587754942"},{"product_id":"jeep-jk-frame-chop-rear-bumper-and-cross-member-07-17-wrangler-jk","title":"Hatchet Frame Chop Rear Bumper and Cross member for Jeep JK \/ JKU","description":"\u003cp\u003eThe Motobilt Jeep JK Hatchet Rear Frame Chop Bumper allows for 5 inches of additional ground clearance over the factory receiver hitch. The additional ground clearance you gain is the same as going from a 35 inch tire to a 40 inch.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003ch4\u003eFits:\u003c\/h4\u003e\r\n\u003cp\u003eJeep JK \u0026amp; JKU Wrangler 2007 to 2018\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e3\/16 inch Laser cut and CNC bent steel body\u003c\/li\u003e\r\n\u003cli\u003e3\/4 inch Thick laser cut D-Rings that pass through the bumper and welded inside and out\u003c\/li\u003e\r\n\u003cli\u003eGain 2 3\/8 inches up and 3 3\/8 inches back of ground clearance\u003c\/li\u003e\r\n\u003cli\u003e5 inches of additional clearance over the factory receiver hitch\u003c\/li\u003e\r\n\u003cli\u003eUltra tight design allows the use of a large spare tire\u003c\/li\u003e\r\n\u003cli\u003eFull protection from corner to corner\u003c\/li\u003e\r\n\u003cli\u003eIncludes high strength cross member\u003c\/li\u003e\r\n\u003cli\u003eCross member bolts into factory body mounts then must be welded to the frame\u003c\/li\u003e\r\n\u003cli\u003eWorks with factory frame or Motobilt jeep JK back half kit\u003c\/li\u003e\r\n\u003cli\u003eCross member includes pre-installed threaded inserts for mounting Motobilt Hatchet JK frame chop rear bumper\u003c\/li\u003e\r\n\u003cli\u003eThreaded mounting holes for JK rear fuel cell skid plate also included\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp dir=\"auto\"\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eShips raw steel. Must be painted or powder coated to prevent rust.  See (\u003c\/span\u003e\u003ca href=\"https:\/\/motobilt.com\/blogs\/first-blog\/steel-it?_pos=3\u0026amp;_sid=2ef388d16\u0026amp;_ss=r\" rel=\"noopener\" style=\"font-size: 0.875rem;\" target=\"_blank\"\u003eSteel-It\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e)\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eInstallation video can be found under the Instructions tab\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eIncludes necessary hardware\u003c\/li\u003e\r\n\u003cli\u003eWeight: 80lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRequires cutting of rear frame rails and removal of factory rear cross member\u003c\/li\u003e\r\n\u003cli\u003eCross member must be welded to frame rails.\u003c\/li\u003e\r\n\u003cli\u003eA receiver hitch will \u003cstrong\u003eNOT work\u003c\/strong\u003e with this bumper.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb1081_-_shipping.pdf?v=1660746178\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1081_Frame_Chop_Bumper_and_Crossmember_JKU_Installation_Instructions_8_11_2022.pdf?v=1660231706\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32093202120788,"sku":"MB1081","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb1081-2.jpg?v=1587754481"},{"product_id":"jeep-jk-transmission-cross-member-07-11-wrangler-jk","title":"Transmission Cross member for 07-11 Jeep JK\/JKU","description":"\u003cp\u003eThe Motobilt Transmission Cross Member for 2007-2011 Jeep JK is the solution to your weak factory cross member. The factory Jeep JK cross members are a known weak point as they will flex or bow up while ontop of an obstacle off road. The thin material can also dent quite easily. The Motobilt cross member is built to take the abuse a true trail rated Jeep can throw at it.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e3\/16 inch laser cut and CNC bent steel plate design\u003c\/li\u003e\r\n\u003cli\u003eLayered design provides 3\/8 inch of material at the most stressfull points\u003c\/li\u003e\r\n\u003cli\u003eWorks with factory components or the Motobilt skid plate system.\u003c\/li\u003e\r\n\u003cli\u003eComplete bolt in design\u003c\/li\u003e\r\n\u003cli\u003eWeight: 30lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB3027_-_Shipping.pdf?v=1629494952\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32093239902292,"sku":"MB3027","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb3027-1.jpg?v=1590188090"},{"product_id":"jeep-jk-jku-back-half-kit-07-18-wrangler-jk","title":"Back Half Frame Kit for Jeep JK\/JKU","description":"\u003cp\u003eThis cutting edge design is the first of its kind for the Jeep JK. The kit replaces the entire back half of the frame from below the doors to the rear bumper. The Motobilt Jeep JK back half kit was 3 D cad designed by our legendary team of experts. The three main factors considered in the design were room for coil over shocks, a rear mounted fuel cell, and the ability to mount a true 4 link suspension.\u003c\/p\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eThe kit includes:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePassenger side frame rails. 2 pcs\u003c\/li\u003e\r\n\u003cli\u003eDriver side frame rails. 2 pcs\u003c\/li\u003e\r\n\u003cli\u003eFrame rail connecting plates 2 pcs\u003c\/li\u003e\r\n\u003cli\u003eRear cross member 1 pcs\u003c\/li\u003e\r\n\u003cli\u003eFrame chop rear bumper 1 pcs\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWorks with both the 2 door JK or the 4 door JKU\u003c\/li\u003e\r\n\u003cli\u003eFrame rails above axle center line are moved inwards 5 inches per side allowing room for coil overs.\u003c\/li\u003e\r\n\u003cli\u003eRoom for single or dual shocks.\u003c\/li\u003e\r\n\u003cli\u003eMain frame rails include 2 new body mounts that are matched to the OEM specifications for precision.\u003c\/li\u003e\r\n\u003cli\u003eTwo of the factory body mounts over the axle are removed.\u003c\/li\u003e\r\n\u003cli\u003e4 frame cross members are removed allowing room for more axle travel upward. This allows a lower center of gravity.\u003c\/li\u003e\r\n\u003cli\u003eThe new 3\/16 inch thick steel frame rails provide a much stronger mounting point for link mounts then the thin weak factory frame rails.\u003c\/li\u003e\r\n\u003cli\u003eAn optional cross member to mount 4 link mounts will be available soon.\u003c\/li\u003e\r\n\u003cli\u003eAn optional aluminum fuel cell with 3\/16 inch thick steel plate skid plate will be available soon. An OEM sending unit will be compatible with the new cell.\u003c\/li\u003e\r\n\u003cli\u003ePrecise easy to locate points for cutting the factory frame rails are provided and alignment holes are in place to make the install fool proof.\u003c\/li\u003e\r\n\u003cli\u003eThe install requires the frame to be cut with a saw and not a torch. This makes for a clean, quick, and precise install.\u003c\/li\u003e\r\n\u003cli\u003eThe rear frame rails are shortened 2.5 inches over stock and moved up 1 1\/8 inches.\u003c\/li\u003e\r\n\u003cli\u003eWill work with Antirock sway bar kit for JK\u003c\/li\u003e\r\n\u003cli\u003eWeight: 166lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eYour stock exhaust will have to be modified\u003c\/li\u003e\r\n\u003cli\u003eRequires cutting and welding\u003c\/li\u003e\r\n\u003cli\u003eMust remove factory fuel cell.\u003c\/li\u003e\r\n\u003cli\u003eAftermarket fuel cell required.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB3025_-_Shipping_ac82aba7-dbfe-4188-94ea-22c88072185f.pdf?v=1699896281\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB3025_-_Installation_Instructions.pdf?v=1588274700\" class=\"btn\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32093246062676,"sku":"MB3025","price":1659.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB3025-1.jpg?v=1590186130"},{"product_id":"jeep-jk-arb-compressor-mount-07-18-wrangler-jk","title":"ARB Compressor Mount for Jeep JK \/ JKU","description":"\u003cp\u003eMotobilt's ARB Compressor Mount mounts your ARB compressor to the brake master cylinder bolts. Mounting in this location utilizes the space to the inside of the master cylinder. The bracket is CNC cut from 3\/16 inch high strength steel plate. Shipped bare steel so you can paint color of your choice\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep ARB Single Compressor Mount mounts. (Does Not work with Twin Compressor)\u003c\/li\u003e\r\n\u003cli\u003eCNC cut from 3\/16 inch high strength steel plate\u003c\/li\u003e\r\n\u003cli\u003eSold as each\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eShips bare steel so you can paint color of your choice\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB2058_-_Shipping.pdf?v=1625079051\" rel=\"noopener noreferrer\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32093714972756,"sku":"MB2058","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB2058-4.jpg?v=1587754407"},{"product_id":"jk-rear-1-ton-axle-swap-w-gm-14-bolt-with-pinion-guard","title":"14 Bolt One Ton Conversion Truss w\/ pinion guard for Jeep JK Rear","description":"\u003cp\u003eThe Motobilt Jeep JK rear 1 ton axle swap with pinion guard makes installing a beefy rear axle in your Jeep a breeze. When designing our kit we wanted it to be easy to install. Whether you are a professional shop or are a DIY fabricator at home, this kit will save you time and money. Our kit spans much further across the axle than other kits on the market. This allowed us to incorporate the spring mounts into the truss. You will simply bolt the pinion support onto the axle and then set all of the other components onto the top. With the aligning tabs and slots, the installation is foolproof.\u003c\/p\u003e\r\n\u003cp\u003eThe kit was designed to work with the GM 14 bolt rear axle that was found in 1996-2006 GM 2500 and 3500 Single Rear Wheel axle trucks. The wheel mounting surface (WMS) will be 68 inches wide and the casting on the center differential has lots of ribbing. Do not use an axle from a van as the differential is offset. When installing this axle, remember that you will need to address things such as the 8x6.5 bolt pattern vs. the Jeep's factory 5x5 bolt pattern.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJK Rear 1 Ton axle swap with pinion guard\u003c\/li\u003e\r\n\u003cli\u003eDesigned to work with the GM 14 bolt rear axle that was found in 1996-2006 GM 2500 and 3500 Single Rear Wheel axle trucks\u003c\/li\u003e\r\n\u003cli\u003eThe axle truss ships raw steel and will require professional welding\u003c\/li\u003e\r\n\u003cli\u003eLaser cut and CNC formed from 1\/4 inch thick steel plate\u003c\/li\u003e\r\n\u003cli\u003eIntegrated coil spring mounts with truss\u003c\/li\u003e\r\n\u003cli\u003eEasy install with no measurements needed\u003c\/li\u003e\r\n\u003cli\u003eTrack bar includes 4 mounting locations in case you change up your suspension\u003c\/li\u003e\r\n\u003cli\u003eMain truss body is one solid piece with several support beams made of 1\/4 inch steel plate\u003c\/li\u003e\r\n\u003cli\u003eCoil spring mounts have a built-in threaded nut to use with a spring retainer\u003c\/li\u003e\r\n\u003cli\u003eUpper and lower link mounts are formed so that your suspension is still in alignment once the wider axles are installed\u003c\/li\u003e\r\n\u003cli\u003eCan easily be changed if you want to run a custom suspension design\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003cli\u003eWeight: 80lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eT\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003ehe pinion guard will hit the factory gas tank\u003c\/strong\u003e\u003c\/span\u003e unless you stretch the wheelbase, move the rear axle back, relocate the gas tank, or do not install the pinion guard.\u003c\/li\u003e\r\n\u003cli\u003eOptional HD steel diff cover (MB4012) is NOT included but available separately in the related parts tab.\u003c\/li\u003e\r\n\u003cli\u003eBrake components such as the tone rings and ABS sensors will need to be addressed as they are not included in this kit\u003c\/li\u003e\r\n\u003cli\u003eAxle assembly shown is NOT included and is only shown for demonstration purposes.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB4058_-_Shipping.pdf?v=1628024689\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB4058_-_Assembly_Instructions_55092e7c-0589-4bdf-8414-c5f9ed6b0d64.pdf?v=1628024690\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eCheck out this blog post showing how one of our customers installed their 1\u003ca href=\"https:\/\/motobilt.com\/blogs\/first-blog\/mudtiremedia-installing-14-bolt-rear-axel-truss-pinion-guard\" target=\"_blank\"\u003e4 bolt one ton conversion truss.\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cbr\u003e\u003c\/h4\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32093924786260,"sku":"MB4058","price":579.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB4058_B.jpg?v=1590186118"},{"product_id":"jeep-jk-1-ton-swap-truss-kit-super-duty-dana-60","title":"Super Duty Dana 60 JK One Ton Conversion Truss","description":"\u003cp\u003eThe Jeep JK 1 ton axle swap kit allows you to use a 2005 and up Ford Super Duty Dana 60 front axle and install it into a Jeep Wrangler JK. It consists of a truss, upper link mounts, lower link mounts, coil spring buckets, adjustable track bar mount for the axle, track bar mount for the frame, 2 Johnny Joints, diff cover, and sway bar end link mounts. The main body of the truss is made from 1\/4 inch thick steel plate that is laser cut and CNC formed in house at Motobilt. We then brace the length of the truss with 1\/4 inch beams that closely follow every contour of the axle. Another key feature that sets us apart is the integrated and low profile diff cover. This low profile cover will work with the huge steering that comes on these 1 ton axles, yet still provides you ultimate protection. With our kit there is no measuring needed. You simply bolt the diff cover up and everything will go in place like it should. Instead of using bushings in the top, we have a flexible and rebuildable johnny joint for both upper links.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJK 1 ton axle swap kit\u003c\/li\u003e\r\n\u003cli\u003eThis kit allows you to use a 2005 and up Ford Super Duty Dana 60 front axle and install it into a Jeep Wrangler JK\u003c\/li\u003e\r\n\u003cli\u003e1\/4 inch laser cut and cnc formed\u003c\/li\u003e\r\n\u003cli\u003eQuick and easy no-measure install\u003c\/li\u003e\r\n\u003cli\u003eTrack bar mounts for both the frame and axle\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eLower control arm mounts\u003c\/li\u003e\r\n\u003cli\u003eUpper control arm mounts with Currie Johnny Joints.\u003c\/li\u003e\r\n\u003cli\u003eSway bar end link mounts\u003c\/li\u003e\r\n\u003cli\u003eLow profile diff cover that will clear the steering\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003cli\u003eWeight: 80lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003eNotes:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAll factory brackets will need to be cut off of the donor axle.\u003c\/li\u003e\r\n\u003cli\u003e2 inches will have to be removed from the cast housing on the short side axle tube.\u003c\/li\u003e\r\n\u003cli\u003eIncludes jig to locate the lower control arm mounts for exact fitment when welding\u003c\/li\u003e\r\n\u003cli\u003eDoes not weld to the cast center section\/housing. \u003c\/li\u003e\r\n\u003cli\u003eThe lower control arm mounts are wider then factory due to the width of the axle.  We recommend running a flex joint of your choosing on your lower control arms to prevent binding.\u003c\/li\u003e\r\n\u003cli\u003eWelding, cutting, grinding required.\u003c\/li\u003e\r\n\u003cli\u003eDoes NOT work with M256 front axle.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB4059_-_Installation_Instructions.pdf?v=1627591299\" class=\"btn\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eAxle Truss Prep\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" rel=\"noopener noreferrer\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/SD60_Truss_Preperation_Instructions.pdf?v=1617719353\" target=\"_blank\"\u003eAxle Truss Prep\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32093977542740,"sku":"MB4059","price":649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/IMG_6069.jpg?v=1720538920"},{"product_id":"jeep-jk-rubicon-dana-44-front-axle-truss","title":"Dana 44 Front Axle Truss for Jeep JK Rubicon","description":"\u003cp\u003eThe Motobilt Jeep JK Rubicon Dana 44 front axle truss is a great way to beef up the axle tubes on your Jeep JK and JK Unlimited. The Motobilt Jeep JK Rubicon Dana 44 front axle truss system is a quick way to add strength and style to your Jeep. The Motobilt truss wraps arount the stock upper passenger side link and extends out to both the driver and passenger side coil spring mounts for added strength throughout the length of the axle. You will see in some of the pictures that the truss fits very tight.\u003c\/p\u003e\r\n\u003cp\u003eWe have noticed some slight differences in the axles from Jeep. Some slight grinding may be required during the installation process. The top caps are CNC cut from 1\/4 inch high strength steel plate and is slotted to align the front and back vertical caps. The front and rear caps are CNC cut from 1\/8 inch inch high steel plate.\u003c\/p\u003e\r\n\u003cp\u003eThe plates are dimpled to add strength and cross section width to the parts. Essentially we can keep the axle a little lighter and make it look very cool with the dimple die holes. The kit includes a short and long side 1\/4 inch top cap, two 1\/4 inch vertical supports, and five 1\/8 inch front and back dimpled plates. This kit requires an experienced welder to install on the vehicle.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep JK Rubicon Dana 44 front axle truss system\u003c\/li\u003e\r\n\u003cli\u003eTop caps are CNC cut from 1\/4 inch high strength steel plate\u003c\/li\u003e\r\n\u003cli\u003eFront and rear caps are CNC cut from 1\/8 inch high steel plate\u003c\/li\u003e\r\n\u003cli\u003eIncludes short and long side 1\/4 inch top cap and 2 1\/4 inch vertical supports and 5 1\/8 inch front and back dimpled plates\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight = 18lbs\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThis kit requires 3 inch bump stop extensions to keep the truss from contacting the oil pan. Bump stop extensions would be used to keep larger tires like 35 and up from contacting the fenders when articulated\u003c\/li\u003e\r\n\u003cli\u003eThis kit requires an experienced welder to install on the vehicle\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb4027_-_shipping.pdf?v=1660769861\" target=\"_blank\" rel=\"noopener noreferrer\" class=\"btn\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32094175428692,"sku":"MB4027","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/16177871_10153991212972202_2819245117311305046_o.jpg?v=1590186149"},{"product_id":"jeep-jk-front-bumper-skid-plate-07-18-wrangler-jk-the-hammer","title":"Hammer Front Bumper Skid Plate for Jeep JK \/ JKU","description":"\u003cp\u003eThe Hammer Skid plate is an add-on option to The Hammer Jeep JK Front Bumper. Skid plate is laser cut from 3\/16 inch P and O steel and formed on a press brake. To install the skid plate, you have to trim approx. 1 inch off each side of the crash bar. If you remove the skid plate later, the part that you've trimmed will not be seen. Skid plate bolts on to The Hammer front bumper and requires no welding.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003cp\u003eSpecifications\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThe Hammer skid plate\u003c\/li\u003e\r\n\u003cli\u003eFits Jeep JK\u003c\/li\u003e\r\n\u003cli\u003eLaser cut from 3\/16 inch P and O steel\u003c\/li\u003e\r\n\u003cli\u003eProudly made in the USA\u003c\/li\u003e\r\n\u003cli\u003eSold as each\u003c\/li\u003e\r\n\u003cli\u003eWeight: 30lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThe skid plate is the bottom piece shown with three holes. Bumper and skid plate sold separately\u003c\/li\u003e\r\n\u003cli\u003eCrash bar cross member may need trimming on edges for the skid plate to mount flush.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" rel=\"noopener noreferrer\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb1036_-_shipping.pdf?v=1660742123\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32094902517844,"sku":"MB1036","price":209.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB1036-new-view-3.jpg?v=1590186167"},{"product_id":"jeep-jk-cb-antenna-mount-07-18-wrangler-jk-steel-kit","title":"CB Antenna Mount for Jeep JK \/ JKU","description":"\u003cp\u003eThe Motobilt Jeep JK CB antenna mount is a simple way to mount your CB antenna to the tailgate of your Jeep. Mounting a CB antenna on a Jeep JK can be a simple process with the right mounting bracket. The Motobilt Jeep JK CB antenna mount is designed to work with or without the factory tire carrier on the tailgate. The mount bolts to the tailgate with two bolts. The antenna then mounts to the bracket. The mounting hole for the antenna is 1\/2 inch to allow the plastic isolator spacer to work correctly. The bracket is CNC laser cut from 3\/16 inch steel plate.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep JK CB antenna mount\u003c\/li\u003e\r\n\u003cli\u003eCNC laser cut from 3\/16 inch steel plate\u003c\/li\u003e\r\n\u003cli\u003eMounting hole for the antenna is 1\/2 inch\u003c\/li\u003e\r\n\u003cli\u003eInclude spacers to properly fit the factory spare tire mount if needed\u003c\/li\u003e\r\n\u003cli\u003eBlack Powder Coated or raw metal\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Raw Metal","offer_id":39521059504212,"sku":"MB2012-Raw","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Black Powder Coat","offer_id":39521059536980,"sku":"MB2012-Powder","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb2012-1.jpg?v=1587754425"},{"product_id":"universal-coil-spring-axle-mount","title":"Axle Coil Spring Mount Universal","description":"\u003cp\u003eThey are sold as a weld together kit enough to do one pair of spring mounts. These mounts are made from 1\/4 inch thick steel plate that is laser cut and formed in house at Motobilt\u003cbr\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe plates are tabbed to make assembly easy. They include a coil spring retainer plate to securely hold your springs in place when fully drooped out. Again these will need to be welded together and come with the parts necessary to mount 1 pair of coil springs onto the axle.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eUniversal coil spring axle mount\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eLaser cut 1\/4 inch thick steel plate\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight = 10lbs\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"2.5 Inch","offer_id":32095185961044,"sku":"MB1543-250","price":69.98,"currency_code":"USD","in_stock":true},{"title":"2.75 Inch","offer_id":32095185993812,"sku":"MB1543-275","price":69.98,"currency_code":"USD","in_stock":true},{"title":"3 Inch","offer_id":32095186026580,"sku":"MB1543-300","price":69.98,"currency_code":"USD","in_stock":true},{"title":"3.25 Inch","offer_id":32095186059348,"sku":"MB1543-325","price":69.98,"currency_code":"USD","in_stock":true},{"title":"3.5 Inch","offer_id":32095186092116,"sku":"MB1543-350","price":69.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb1543-2_3.jpg?v=1587754408"},{"product_id":"jeep-jk-rear-bolt-on-d-ring-mounts-07-18-wrangler-jk","title":"Bolt On Rear D-Ring Mounts for Jeep JK \/ JKU","description":"\u003cp\u003eMotobilt offers the Jeep JK Rear Bolt on D- Ring Mounts. These are the ultimate in strength with a massive 3\/4 inch thick high strength steel plate extending all the way into the frame rail on the rear of the Jeep JK and JK Unlimited. This is the perfect option for those not wanting to run a full rear bumper. Motobilt is in the business of building quality offroad products. The Jeep JK and JK Unlimited Rear Bolt in Shackle Mounts are an example of this. This shackle mount system is designed for those not wanting to run a rear bumper. The shackle mounts bolt into the rear of the frame rail. They do require trimming the frame rail off flush to the rear cross member. If you ever decide to mount a full bumper the trimming does not remove any vital material from the frame and will allow for change in the future if you decide.\u003c\/p\u003e\r\n\u003cp\u003eThe JK Rear Shackles were designed with strength in mind. The shackle mount features a massive 3\/4 inch thick steel plate that extends all the way into the frame with (2) 3\/4 inch bolts passing all the way through the frame to capture it. The kit is shipped bare metal so you will need to paint or powdercoat to the color of your choice. The hardware required to install them is included with the part. 4 x 3\/4 inch grade 8 bolts, flat washers, and fabricated nuts.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep JK and JK Unlimited Rear Bolt on D- Ring Mounts\u003c\/li\u003e\r\n\u003cli\u003e3\/4 inch thick high strength steel plate\u003c\/li\u003e\r\n\u003cli\u003e(2) 3\/4 inch bolts passing all the way through the frame\u003c\/li\u003e\r\n\u003cli\u003eHardware included\u003c\/li\u003e\r\n\u003cli\u003eSold as pair.\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight: 10lbs\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB2072_-_Shipping.pdf?v=1678715575\" target=\"_blank\" rel=\"noopener noreferrer\" class=\"btn\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eShips bare metal so you will need to paint or powdercoat to the color of your choice\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32095948800084,"sku":"MB2072","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mbweb2.2_3_of_7.jpg?v=1587754419"},{"product_id":"jeep-jk-front-bolt-on-d-ring-shackle-mounts-07-18-wrangler-jk","title":"Front Bolt On D-Ring Shackle Mounts for Jeep JK \/ JKU\/ JL \/ JT","description":"\u003cp\u003eThe Motobilt front d-ring shackle mounts are designed for function and easy installation. The Motobilt front bumper bolt on d-ring shackle mounts are made from high strength plate steel. The mounting surface of the Motobilt bolt on d-ring shackle mount is 3\/8 inch thick while the shackle mount is an impressive 3\/4 inch thick steel. The hole for the d-ring is 1 inch diameter. The Jeep JK d-ring shackle mount will install in minutes with simple hand tools. The bolt pattern is designed to fit the front Jeep JK bumper mount bolt hole configuration. They are designed to be used with a Jeep JK front bumper where the front 8 mounting bolts can be seen from the front of the Jeep. The d-ring shackle mount ships to you bare steel so that you can spray paint or powdercoat to the color of your choice. The Jeep d-ring shackle mounts are sold in pairs.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep front bumper bolt on d-ring shackle mounts\u003c\/li\u003e\r\n\u003cli\u003eD-ring shackle mount is 3\/8 inch thick steel\u003c\/li\u003e\r\n\u003cli\u003eShackle mount is an impressive 3\/4 inch thick steel\u003c\/li\u003e\r\n\u003cli\u003eHole for the d-ring is 1 inch diameter\u003c\/li\u003e\r\n\u003cli\u003eSold as pair\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight = 16lbs\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eShips to you bare steel so that you can spray paint or powdercoat to the color of your choice\u003c\/li\u003e\r\n\u003cli\u003eThe actual d-ring shackle is not included with the mount. They can be purchased separately\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32095955320916,"sku":"MB2028","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb2028-view-1.jpg?v=1611354604"},{"product_id":"jeep-jk-front-bumper-07-18-wrangler-jk-crusher-series-bare-steel","title":"Crusher Front Bumper for Jeep JK \/ JKU","description":"\u003c!--[difficulty:2]--\u003e\r\n\u003cp\u003eThe Motobilt Jeep Wrangler JK Crusher recessed winch bumper will provide you the ultimate in protection and recovery. The bumper allows you to secure your winch down low in between the frame rails. The high clearance design includes a built-in skid plate also. The bumper is made from 3\/16-inch-thick steel plate that is laser cut at Motobilt HQ then cnc bent. The bumper uses 3\/4-inch-thick laser cut d-ring mounts that pass through the bumper and are welded both inside and out. This setup provides for superior strength.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eFits 2007 and Newer Jeep JK2 door and 4 door JK Unlimited\u003c\/li\u003e\r\n\u003cli\u003eMeasures 46.5\"s wide at widest point.\u003c\/li\u003e\r\n\u003cli\u003eRecessed Winch\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eWinch:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eOur winch bumper is designed to fit a standard mounting pattern of 10\" x 4.5\" and has been tested with the Warn VR EVO and Zeon series winches. It may also fit other untested winches.\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eFabricated From 3\/16\" Thick High Strength Steel Plate\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eBolt on\u003c\/strong\u003e design.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eSway Bar Compatibility: \u003c\/strong\u003eWorks with all factory sway bars including Rubicon and works with Anti-Rock as well.\u003c\/li\u003e\r\n\u003cli\u003e3\/4-inch-thick laser cut d-ring mounts that pass through the bumper and are welded both inside and out\u003c\/li\u003e\r\n\u003cli\u003eIncludes all the necessary mounting hardware.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eProudly Made in the USA:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCrafted with precision and pride in the United States, ensuring the highest quality and supporting American manufacturing.\u003c\/li\u003e\r\n\u003cli\u003eSold as each.\u003c\/li\u003e\r\n\u003cli\u003eWeight: 70lbs (approx.)\u003c\/li\u003e\r\n\u003cli\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWill Not work with Teraflex S\/T Dual rate front sway bar.\u003c\/li\u003e\r\n\u003cli\u003eThe outer edge of the crash bar will need to be trimmed to fit where the lower portion of the bumper mounts.\u003c\/li\u003e\r\n\u003cli\u003eThe 8 factory mounting holes may need to be open up to a 9\/16\".\u003c\/li\u003e\r\n\u003cli\u003eShips raw steel.  Must be painted or powder coated to prevent rust. See (\u003ca href=\"https:\/\/motobilt.com\/blogs\/first-blog\/steel-it?_pos=3\u0026amp;_sid=d366c9466\u0026amp;_ss=r\" rel=\"noopener\" target=\"_blank\"\u003eSteel-It\u003c\/a\u003e)\u003c\/li\u003e\r\n\u003cli\u003e2012 and newer models will need a vacuum relocation pump PN MB2060.  The factory bracket must be cut off in order for the winch plate to fit.\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003ePrevious versions of this bumper may ship with fairlead spacer.\u003c\/li\u003e\r\n\u003cli\u003eDoes \u003cstrong\u003eNOT\u003c\/strong\u003e work with \u003cstrong\u003eSuper Winch EXP or Offset winches such as the Warn 9.5 TI series.\u003c\/strong\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1011_-_Shipping.pdf?v=1699647547\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1011_-_Assembly_Instructions_2.pdf?v=1717778713\" class=\"btn\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32098733523028,"sku":"MB1011","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb1011-ja-1.jpg?v=1614094205"},{"product_id":"jeep-jk-front-bumper-no-fog-lights-07-18-wranger-jk-the-hammer-series-bare-steel","title":"Hammer Front Bumper No Fog Mount For Jeep JK \/ JKU","description":"\u003c!--[difficulty:2]--\u003e\r\n\u003cp\u003eThe Motobilt Jeep JK Front The Hammer Bumper is a 48.5 inch wide, sleek, tight-fitting design proudly made in the USA. Our JK The Hammer Bumper is 3D CAD designed to ensure the best possible fit to your Jeep JK. The bumper will fit all year models of the Jeep JK 2 door and 4 door JK Unlimited. The front d-ring mounts are CNC cut from 3\/4 inch thick steel plate and pass through the bumper where they weld to the bumper mounting plates in addition to the bumper body. This was done for added strength to the recovery point.\u003c\/p\u003e\r\n\u003cp\u003eThe Hammer bumper can be run with or without the optional skid plate. To install the skid plate, you have to trim approx 1 inch off each side of the crash bars. If you remove the skid plate later, the part that you trimmed will not be seen. The ends of the Hammer bumper taper up for tire clearance. Each cut in the bumper was intentional to keep it tight to the frame rail for a better approach angle. The main construction of the bumper is fabricated from 3\/16 inch thick high strength steel plate. The bumper also serves as a winch mount. The top side of the JK The Hammer Bumper has bolt holes for a recovery winch.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep JK The Hammer 48.5 inch front bumper with stinger and grill hoop\u003c\/li\u003e\r\n\u003cli\u003eFits all year models of the Jeep JK 2 door and 4 door JK Unlimited\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eWinch:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eOur winch bumper is designed to fit a standard mounting pattern of 10\" x 4.5\" and has been tested with the Warn VR EVO and Zeon series winches. It may also fit other untested winches.\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eFabricated from 3\/16-inch-thick high strength steel plate.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eBolt on\u003c\/strong\u003e design.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eSway Bar Compatibility: \u003c\/strong\u003eWorks with all factory sway bars including Rubicon and works with Anti-Rock as well.\u003c\/li\u003e\r\n\u003cli\u003e3\/4-inch-thick steel d-ring mounts\u003c\/li\u003e\r\n\u003cli\u003ePass through d-ring mounts weld to the bumper..\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eProudly Made in the USA:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCrafted with precision and pride in the United States, ensuring the highest quality and supporting American manufacturing.\u003c\/li\u003e\r\n\u003cli\u003eSold as each.\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eWeight: 60lbs (approx)\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eIf installing a winch, MB1002 or MB1141 fairlead mount will also need to purchased\u003c\/li\u003e\r\n\u003cli\u003eShips bare steel\u003c\/li\u003e\r\n\u003cli\u003eNo cutting required on the frame rails on your Jeep JK\u003c\/li\u003e\r\n\u003cli\u003eThe two outside top bolt holes on your frame need to be drilled out to 9\/16 inch\u003c\/li\u003e\r\n\u003cli\u003e2012 and newer models will need a vacuum relocation pump bracket PN MB2060\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" rel=\"noopener noreferrer\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb1025_-_shipping.pdf?v=1660686055\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1025_-_Assembly_Instructions.pdf?v=1698766510\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32098923774036,"sku":"MB1025","price":469.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB1025-1.jpg?v=1614195698"},{"product_id":"jeep-jk-front-bumper-07-18-wrangler-jk-hatchet-series-bare-steel","title":"Hatchet Series Front Frame Chop Bumper for Jeep JK \/ JKU","description":"\u003cp\u003eThe Motobilt Hatchet Jeep JK Front Bumper is an ultra-slim design for the front of your Jeep JK. The Hatchet is available in a few different configurations. This Hatchet configuration is the base model. The Hatchet includes 3\/4 inch thick steel D-Ring mounts that pass through the bumper and are welded inside and out for superior strength. The Hatchet is a total of 41 inch wide which allows for closer approach angles.  This is a frame chop design bumper.  The front frame horns have to be cut off approximately 2\"s and the bottom crash bar has to be completely cut off and removed from the frame.  The areas that need to be cut are shown in the pictures.  Also holes will have to be drilled through the frame rails in order to mount the bumper to the Jeep.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eHatchet Jeep JK front bumper\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eFrame Modification Required:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eInstallation necessitates cutting of the frame, ensuring a perfect fit and superior performance.\u003c\/li\u003e\r\n\u003cli\u003eApproach angle increased by moving axle in 2 inches.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eWinch:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eOur winch bumper is designed to fit a standard mounting pattern of 10\" x 4.5\" and has been tested with the Warn VR EVO and Zeon series winches. It may also fit other untested winches.\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eShips raw metal so you can customize to your needs.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eSway Bar Compatibility: \u003c\/strong\u003eWorks with all factory sway bars including Rubicon and works with Anti-Rock as well.\u003c\/li\u003e\r\n\u003cli\u003eIncludes 3\/4-inch-thick steel d-ring mounts.\u003c\/li\u003e\r\n\u003cli\u003eTotal of 41 inch wide\u003c\/li\u003e\r\n\u003cli\u003eHardware included.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eProudly Made in the USA:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCrafted with precision and pride in the United States, ensuring the highest quality and supporting American manufacturing.\u003c\/li\u003e\r\n\u003cli\u003eSold as each.\u003c\/li\u003e\r\n\u003cli\u003eWeight: 42lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eFits:\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep Wrangler JK \/ JKU 2007-2018\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eShips raw steel. Must be painted or powder coated to prevent rust.  See (\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/blogs\/first-blog\/steel-it?_pos=3\u0026amp;_sid=2ef388d16\u0026amp;_ss=r\" target=\"_blank\"\u003eSteel-It\u003c\/a\u003e)\u003c\/li\u003e\r\n\u003cli\u003eIf installing a winch, MB1002 fair lead mount will also need to purchased\u003c\/li\u003e\r\n\u003cli\u003e2012 and newer models requires frame modification and vacuum pump relocation in Jeep JK\u003c\/li\u003e\r\n\u003cli\u003eYour frame ends and crash bar must be\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ecut off and holes drilled\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethrough the frame rails.  Does not use any factory holes.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1048_-_Shipping_1.pdf?v=1628024469\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1048_-_Assembly_Instructions.pdf?v=1628023110\" class=\"btn\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32098953691220,"sku":"MB1048","price":389.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb1048-1.jpg?v=1587754508"},{"product_id":"jeep-jk-front-bumper-w-fogs-07-18-wrangler-jk-hatchet-series-bare-steel","title":"Hatchet Series Front Frame Chop Bumper w\/Fog Mounts for Jeep JK \/ JKU","description":"\u003cp\u003eThe Motobilt Hatchet Jeep JK Front Bumper with fog light holes is an ultra-slim design for the front of your Jeep JK. The Hatchet is available in a few different configurations. The Hatchet includes 3\/4-inch-thick steel d-ring mounts that pass through the bumper and our welded inside and out for superior strength. The Hatchet is a total of 41-inch wide which allows for closer approach angles. This is a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eframe chop\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edesign bumper.  The front frame horns have to be cut off approximately 2\"s and the bottom crash bar has to be completely cut off and removed from the frame.  The areas that need to be cut are shown in the pictures.  Also, holes will have to be drilled through the frame rails in order to mount the bumper to the Jeep.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eHatchet Jeep JK front bumper with fog light holes\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eFrame Modification Required:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eInstallation necessitates cutting of the frame, ensuring a perfect fit and superior performance.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eWinch:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eOur winch bumper is designed to fit a standard mounting pattern of 10\" x 4.5\" and has been tested with the Warn VR EVO and Zeon series winches. It may also fit other untested winches.\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eFog Light\u003c\/strong\u003e holes for factory lights.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eSway Bar Compatibility: \u003c\/strong\u003eWorks with all factory sway bars including Rubicon and works with Anti-Rock as well.\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eApproach angle increased by moving the bumper in 2 inches.\u003c\/li\u003e\r\n\u003cli\u003eIncludes 3\/4-inch-thick steel d-ring mounts.\u003c\/li\u003e\r\n\u003cli\u003eShips raw metal so you can customize to your needs.\u003c\/li\u003e\r\n\u003cli\u003eTotal of 41 inch wide\u003c\/li\u003e\r\n\u003cli\u003eHardware included.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eProudly Made in the USA:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCrafted with precision and pride in the United States, ensuring the highest quality and supporting American manufacturing.\u003c\/li\u003e\r\n\u003cli\u003eSold as each.\u003c\/li\u003e\r\n\u003cli\u003eWeight: 45lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eFits:\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep Wrangler JK \/ JKU 2007-2018\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThis Hatchet configuration comes with fog light holes and integrated mounts for your factory fog lights.\u003c\/li\u003e\r\n\u003cli\u003eIf installing a winch, MB1002 fairlead mount will also need to purchased.\u003c\/li\u003e\r\n\u003cli\u003eShips raw steel. Must be painted or powder coated to prevent rust.  See (\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/blogs\/first-blog\/steel-it?_pos=3\u0026amp;_sid=2ef388d16\u0026amp;_ss=r\" target=\"_blank\"\u003eSteel-It\u003c\/a\u003e)\u003c\/li\u003e\r\n\u003cli\u003eYour frame ends and crash bar\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003emust be cut off \u003c\/span\u003e\u003c\/strong\u003eand holes drilled through the frame rails. Does not use any factory holes.\u003c\/li\u003e\r\n\u003cli\u003e2012 and newer models frame modification required and vacuum pump relocation is required in Jeep JK\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1048F_-_Shipping_1.pdf?v=1628024470\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1048_-_Assembly_Instructions.pdf?v=1628023110\" class=\"btn\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32098973483092,"sku":"MB1048F","price":449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb1048f-1_1.jpg?v=1587754511"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/collections\/image_051faacb-37d4-42f5-9a6a-464015b6db5b.jpg?v=1593703697","url":"https:\/\/motobilt.com\/collections\/jeep-jk-jku-07-18.oembed?page=17","provider":"Motobilt","version":"1.0","type":"link"}