{"title":"Link \u0026 Control Arm Mounts","description":"\u003cp\u003eFind axle tabs, formed lower-link mounts, Jeep control-arm brackets and track-bar mounting parts. Match tube diameter, joint width, bolt size and link angle before choosing your weld-on components.\u003c\/p\u003e","products":[{"product_id":"rockwell-axle-lower-link-plate-kit","title":"Rockwell Axle Lower Link Bracket Kit","description":"\u003cp\u003eThis premium builder kit consists of four (4) 3\/8” thick laser cut steel plates \u0026amp; two (2) 1\/4” thick CNC formed steel gussets.  This kit can be used on either the front or rear axle.\u003c\/p\u003e\r\n\u003cp\u003eThese heavy duty lower link mounts are angled at 20 degrees inwards \u0026amp; precisely fit around the square Rockwell axle shape.  The hole size accepts 3\/4” bolts.  The axis of the pivot bolts is designed at 2” down from the top of the axle, placing the holes 1\/4” below the center of the axle.  The underside of the link plates sit flush with the underside of the axle to provide the maximum amount of ground clearance with the added benefit of providing no low points to hook up on obstacles.  The inside spacing of the link plates is 2-5\/8”.  The precision formed steel gusset plates provided with the kit, tie both link plates together with an easy to position \u0026amp; easy to weld “open corner”.\u003c\/p\u003e\r\n\u003cp\u003eFrom our years of experience building rock crawlers, we constantly think about you, the builder, that’s why we have even added a relief notch in the link plates to fit over the topside seam weld present on Rockwell axles.  This saves a bit of grinding when prepping your axle for welding.  In our minds, it’s the small details that make this a superior builder product.\u003c\/p\u003e\r\n\u003cp\u003eThis product ships as unwelded raw steel.\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32084434157652,"sku":"MB2124","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB2124-view-1.jpg?v=1587754920"},{"product_id":"weld-on-tube-armor","title":"Weld On Tube Armor","description":"\u003cp\u003eThe Motobilt MB1041 weld on tie rod\/link armor is made out of heavy duty 3\/16 inch thick steel plate that is both laser cut and CNC bent.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWeld on tube armor\u003c\/li\u003e\r\n\u003cli\u003eLaser cut and CNC bent of 3\/16 thick steel plate\u003c\/li\u003e\r\n\u003cli\u003eComes in lengths of 42 inches and has many uses\u003c\/li\u003e\r\n\u003cli\u003eEasily cut down into smaller sections\u003c\/li\u003e\r\n\u003cli\u003eWeld it to your tie rod, suspension links, or other tube type armor\u003c\/li\u003e\r\n\u003cli\u003eStrengthens tubing while preventing it from denting or caving upon impact\u003c\/li\u003e\r\n\u003cli\u003eUses for this armor are endless\u003c\/li\u003e\r\n\u003cli\u003eSold as each\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32087815159892,"sku":"MB1041-1","price":19.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb1041_1.jpg?v=1587755009"},{"product_id":"jk-cam-delete-plates-front-lower-control-arms-07-18-jk","title":"CAM Bolt Delete Plates for Jeep JK \/ JKU Front Lower Axle Links","description":"\u003cp\u003eThe Motobilt JK Cam Delete Plates allow you to eliminate the slotted factory holes that use a cam bolt.  If your running aftermarket adjustable arms you do not need cam bolts and you can eliminate the weak slots.  These plates come in a set of 4 which allows you to weld both sides of the control arm brackets for both the passenger and driver side. \u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMaterial 3\/16 steel\u003c\/li\u003e\r\n\u003cli\u003eIncludes 4 plates\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32089963823188,"sku":"MB2114","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB2114.jpg?v=1589581334"},{"product_id":"lower-link-mounts-10-degree-offset-pair","title":"Formed Lower Axle Link Mounts 10 Degree Offset","description":"\u003cp\u003eThe Motobilt lower link mounts are a secure way to mount your suspension links. They are made from 1\/4 inch thick steel plate that is laser cut and then cnc bent. These are designed to fit a 3 inch axle tube diameter. The Motobilt lower link mounts for your axle are sold as a pair which is enough to do one axles lower links. They come raw steel and will need to be professionally welded to your axle.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eLower link mounts 10 degree of offset \u003c\/li\u003e\r\n\u003cli\u003eLaser cut 1\/4 inch thick steel plate\u003c\/li\u003e\r\n\u003cli\u003eDesigned to fit a 3 inch axle tube diameter\u003c\/li\u003e\r\n\u003cli\u003eSold as pair\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eShips raw steel\u003c\/li\u003e\r\n\u003cli\u003eNeed to be professionally welded to your axle\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"1\/2 Inch","offer_id":32095619154004,"sku":"MB1536-10-500","price":39.99,"currency_code":"USD","in_stock":true},{"title":"9\/16 Inch","offer_id":32095619186772,"sku":"MB1536-10-562","price":39.99,"currency_code":"USD","in_stock":true},{"title":"5\/8 Inch","offer_id":39523822075988,"sku":"MB1536-10-625","price":39.99,"currency_code":"USD","in_stock":true},{"title":"3\/4 Inch","offer_id":32095619219540,"sku":"MB1536-10-750","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb1536-1.jpg?v=1587754480"},{"product_id":"jeep-tj-lj-xj-zj-heavy-duty-front-lower-control-arm-mounts","title":"Heavy Duty Front Lower Control Arm Mounts for Jeep TJ \/ LJ \/ XJ \/ ZJ","description":"\u003cp\u003eThese Motobilt Jeep lower front control arm mounts will fit a Jeep TJ, LJ, ZJ or an XJ. The mounts are CNC cut out of 1\/4 inch thick P and O steel. The factory control arms on the Jeep TJ, LJ, ZJ, XJ are notorious for failing as they are made of very thin metal. They will either tear off from the axle or bend\/break. The solution is to cut the old mounts off and weld on these HD Motobilt front lower control arm mounts. These mounts will also fit Rubicon models!\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep lower front control arm mounts without cam slots\u003c\/li\u003e\r\n\u003cli\u003eFits Jeep TJ\/LJ\/ZJ\/XJ-also fit Rubicon models\u003c\/li\u003e\r\n\u003cli\u003eCNC cut out of 1\/4 inch thick P and O steel\u003c\/li\u003e\r\n\u003cli\u003eSold as a pair\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight = 8lbs\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThe mounts are available with cam slots PN \u003cstrong\u003eMB2008-CAM\u003c\/strong\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32095645401172,"sku":"MB2008","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb2008-noslot-2.jpg?v=1588976594"},{"product_id":"jeep-tj-lj-xj-zj-heavy-duty-front-lower-control-arm-mounts-w-cam-slots","title":"Heavy Duty Front Lower Control Arm Mounts With CAM Slots for Jeep TJ \/ LJ \/ XJ \/ ZJ","description":"\u003cp\u003eThese Motobilt Jeep lower front control arm mounts will fit a Jeep TJ, LJ, ZJ or an XJ. The mounts are CNC cut out of 1\/4 inch thick P and O steel. The factory control arms on the Jeep TJ, LJ, ZJ, XJ are notorious for failing as they are made of very thin metal. They will either tear off from the axle or bend\/break. The solution is to cut the old mounts off and weld on these HD Motobilt front lower control arm mounts. These mounts will also fit Rubicon models!\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep lower front control arm mounts with cam slots\u003c\/li\u003e\r\n\u003cli\u003eFits Jeep TJ\/LJ\/ZJ\/XJ-also fit Rubicon models\u003c\/li\u003e\r\n\u003cli\u003eCNC cut out of 1\/4 inch thick P and O steel\u003c\/li\u003e\r\n\u003cli\u003eSold as a pair\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight = 12lbs\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThe mounts are available without cam slots PN \u003ca href=\"\/products\/jeep-tj-lj-xj-zj-heavy-duty-front-lower-control-arm-mounts\"\u003e\u003cstrong\u003eMB2008\u003c\/strong\u003e\u003c\/a\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32095659622484,"sku":"MB2008-CAM","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB2008-CAM-view-2.jpg?v=1595176150"},{"product_id":"4-link-axle-tab-steel-2-5-axle-tube","title":"4 Link Axle Tab 2.5\"Axle Tube Diameter","description":"\u003cp\u003eThe Motobilt 4 link axle tabs are laser cut out of 3\/8\" inch thick P and O steel plate. These brackets are built with pure strength in mind! We offer these brackets for just about every axle and link combination out there. In the case of the Motobilt 4 link axle tabs we thought of everything! You get to choose your axle tube diameter and you get to choose your bolt hole size! These link brackets measure 2 inch from center of hole to the axle tube.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e4 Link axle tab\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAxle Tube diameter 2.5 inch\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eCommon axle tube diameters:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDana 30 2.500 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 35 2.500 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 44 1\/2 ton 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 10-bolt 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 12-bolt 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 14-bolt 3.500 inch\u003c\/li\u003e\r\n\u003cli\u003eFord 8.8 3.250 inch\u003c\/li\u003e\r\n\u003cli\u003eFord 9-inch 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 60 rear 3.125 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 44 front 3\/4 ton 2.750 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 60 front 3.125 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 70 rear 3.625 inch\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"1\/2 Inch","offer_id":32096054313044,"sku":"MB2054-250-500","price":4.99,"currency_code":"USD","in_stock":true},{"title":"3\/4 Inch","offer_id":32096054345812,"sku":"MB2054-250-750","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB2054-View-1.jpg?v=1634334707"},{"product_id":"4-link-axle-tab-steel-2-75-axle-tube","title":"4 Link Axle Tab 2.75\" Axle Tube Diameter","description":"\u003cp\u003eThe Motobilt 4 link axle tabs are laser cut 3\/8\" thick steel plate. These brackets are built with pure strength in mind! We offer these brackets for just about every axle and link combination out there. In the case of the Motobilt 4 link axle tabs we thought of everything! You get to choose your axle tube diameter and you get to choose your bolt hole size! These link brackets measure 2 inch from center of hole to the axle tube.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e4 Link axle tab\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAxle Tube diameter 2.75 inch\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eCommon axle tube diameters:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDana 30 2.500 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 35 2.500 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 44 1\/2 ton 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 10-bolt 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 12-bolt 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 14-bolt 3.500 inch\u003c\/li\u003e\r\n\u003cli\u003eFord 8.8 3.250 inch\u003c\/li\u003e\r\n\u003cli\u003eFord 9-inch 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 60 rear 3.125 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 44 front 3\/4 ton 2.750 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 60 front 3.125 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 70 rear 3.625 inch\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"1\/2 Inch","offer_id":32098610643028,"sku":"MB2054-275-500","price":4.99,"currency_code":"USD","in_stock":true},{"title":"3\/4 Inch","offer_id":32098610675796,"sku":"MB2054-275-750","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB2054-View-1_90b49c3e-a547-4ce7-9ca7-0fc573455c57.jpg?v=1634334734"},{"product_id":"4-link-axle-tab-steel-3-axle-tube","title":"4 Link Axle Tab 3\" Axle Tube Diameter","description":"\u003cp\u003eThe Motobilt 4 link axle tabs are laser cut out of 3\/8\" thick steel plate. These brackets are built with pure strength in mind! We offer these brackets for just about every axle and link combination out there. In the case of the Motobilt 4 link axle tabs we thought of everything! You get to choose your axle tube diameter and you get to choose your bolt hole size! These link brackets measure 2 inch from center of hole to the axle tube.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e4 Link axle tab\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAxle Tube diameter 3 inch\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eCommon axle tube diameters:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDana 30 2.500 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 35 2.500 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 44 1\/2 ton 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 10-bolt 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 12-bolt 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 14-bolt 3.500 inch\u003c\/li\u003e\r\n\u003cli\u003eFord 8.8 3.250 inch\u003c\/li\u003e\r\n\u003cli\u003eFord 9-inch 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 60 rear 3.125 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 44 front 3\/4 ton 2.750 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 60 front 3.125 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 70 rear 3.625 inch\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"1\/2 Inch","offer_id":32098620833876,"sku":"MB2054-300-500","price":4.99,"currency_code":"USD","in_stock":true},{"title":"5\/8 Inch","offer_id":32098620866644,"sku":"MB2054-300-625","price":4.99,"currency_code":"USD","in_stock":true},{"title":"3\/4 Inch","offer_id":32098620899412,"sku":"MB2054-300-750","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB2054-View-1_165031a6-eb9c-4a05-8220-69398e8c2c6d.jpg?v=1634334751"},{"product_id":"4-link-axle-tab-steel-3-25-axle-tube","title":"4 Link Axle Tab 3.25\" Axle Tube Diameter","description":"\u003cp\u003eThe Motobilt 4 link axle tabs are laser cut out of 3\/8\" thick steel plate. These brackets are built with pure strength in mind! We offer these brackets for just about every axle and link combination out there. In the case of the Motobilt 4 link axle tabs we thought of everything! You get to choose your axle tube diameter and you get to choose your bolt hole size! These link brackets measure 2 inch from center of hole to the axle tube.\u003cbr\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e4 Link axle tab\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAxle Tube diameter 3.25 inch\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eCommon axle tube diameters:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDana 30 2.500 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 35 2.500 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 44 1\/2 ton 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 10-bolt 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 12-bolt 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 14-bolt 3.500 inch\u003c\/li\u003e\r\n\u003cli\u003eFord 8.8 3.250 inch\u003c\/li\u003e\r\n\u003cli\u003eFord 9-inch 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 60 rear 3.125 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 44 front 3\/4 ton 2.750 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 60 front 3.125 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 70 rear 3.625 inch\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"1\/2 Inch","offer_id":32098623651924,"sku":"MB2054-325-500","price":4.99,"currency_code":"USD","in_stock":true},{"title":"5\/8 Inch","offer_id":32098623684692,"sku":"MB2054-325-625","price":4.99,"currency_code":"USD","in_stock":true},{"title":"3\/4 Inch","offer_id":32098623717460,"sku":"MB2054-325-750","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB2054-View-1_47017c84-daab-45c1-9d9a-744928a76066.jpg?v=1634334770"},{"product_id":"4-link-axle-tab-steel-3-5-axle-tube","title":"4 Link Axle tab 3.5\" Axle Tube Diameter","description":"\u003cp\u003eThe Motobilt 4 link axle tabs are laser cut out of 3\/8\" steel plate. These brackets are built with pure strength in mind! We offer these brackets for just about every axle and link combination out there. In the case of the Motobilt 4 link axle tabs we thought of everything! You get to choose your axle tube diameter and you get to choose your bolt hole size! These link brackets measure 2 inch from center of hole to the axle tube.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e4 Link axle tab\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAxle Tube diameter 3.5 inch\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eCommon axle tube diameters:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDana 30 2.500 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 35 2.500 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 44 1\/2 ton 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 10-bolt 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 12-bolt 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 14-bolt 3.500 inch\u003c\/li\u003e\r\n\u003cli\u003eFord 8.8 3.250 inch\u003c\/li\u003e\r\n\u003cli\u003eFord 9-inch 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 60 rear 3.125 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 44 front 3\/4 ton 2.750 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 60 front 3.125 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 70 rear 3.625 inch\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"1\/2 Inch","offer_id":32098636759124,"sku":"MB2054-350-500","price":4.99,"currency_code":"USD","in_stock":true},{"title":"5\/8 inch","offer_id":42249146564692,"sku":"MB2054-350-625","price":4.99,"currency_code":"USD","in_stock":true},{"title":"3\/4 Inch","offer_id":32098636824660,"sku":"MB2054-350-750","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB2054-View-1_39b68d24-9b4e-4b26-ba37-f896ba41f4fa.jpg?v=1634334806"},{"product_id":"triangulated-lower-link-mount-large-for-1-75-inch-od-round-tube","title":"Bat Wing Lower Triangulated 4 Link Mount LARGE","description":"\u003cp\u003eBuilding triangulated 4 link suspensions does not have to be difficult. Motobilt offers products to make fabricating 4 link suspensions easier for both the professional and DIY fabricator. The Large Link Mount System featured is designed to work with 1.25 x .1 rod ends with 1 inch x 3\/4 inch high misalignment spacers. The mounting width of the pocket where the rod end slides into is 2.625 inch. The link mount is fabricated from 5\/16 inch steel plate. The link mount is designed to work on 1.75 inch OD round tube.\u003c\/p\u003e\r\n\u003cp\u003eThe overall width of the link mount system is 18 inches to spread the load over a wider area. When installing we recommend using a min of .188 inch wall DOM tubing or thicker. You should also add tube gussets to further brace the mounting area. The overall height of the bracket once assembled is 3.88 inch tall (3.875 inch). The link mount is designed to angle the links out at 20 degrees per side totaling 40 degrees. With high misalignment spacers you can vary the actual mounting angle to the axle slightly.\u003c\/p\u003e\r\n\u003cp\u003eThis style link mount requires welding to install. Be sure to have a qualified person weld the parts in and design your suspension. The part is intended for off-road use on vehicles such as Jeep, rock crawlers, rock bouncers, mega trucks, and other vehicles requiring a triangulated 4 link suspension.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1520_-_Shipping.pdf?v=1697491677\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eLarge Batwing style link mount\u003c\/li\u003e\r\n\u003cli\u003eWorks with 1.25 x .1 rod ends with 1 inch x 3\/4 inch high misalignment spacers\u003c\/li\u003e\r\n\u003cli\u003eMounting width of the pocket where the rod end slides into is 2.625 inch\u003c\/li\u003e\r\n\u003cli\u003eDesigned to work on 1.75 inch OD round tube\u003c\/li\u003e\r\n\u003cli\u003eOverall width of the link mount system is 18 inches\u003c\/li\u003e\r\n\u003cli\u003eLink mount is fabricated from 3\/8 inch steel plate\u003c\/li\u003e\r\n\u003cli\u003eLink mount is designed to angle the links out at 20 degrees per side totaling 40 degrees\u003c\/li\u003e\r\n\u003cli\u003eSold as each\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight = 15lbs\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThe part is intended for off-road use on vehicles such as Jeep, rock crawlers, rock bouncers, mega trucks, and other vehicles requiring a triangulated 4 link suspension\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32100312776788,"sku":"MB1520","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB1520-View-4.jpg?v=1587754412"},{"product_id":"ford-super-duty-dana-60-lower-link-mounts-9-16-inch-bolt-hole","title":"Super Duty Dana 60 Lower Link Mount Kit","description":"\u003cp\u003eThe Motobilt Ford Super Duty Dana 60 lower control arm mounts are just the ticket for that custom suspension setup. This heavy duty 1\/4 inch steel brackets are laser cut and cnc formed at the Motobilt headquarters. The will allow you to mount a rod end, flex joint, or other end that has a mounting width of approximately 2.625 inch wide. They are available in either a 9\/16 inch bolt hole or a 3\/4 inch bolt hole. What makes these brackets unique is there mounting width at the axle tube has been necked down to fit on the small amount of axle tube available. You will still need to cut away much of the brackets and cast housing to make room for the mounts but this is a pretty common procedure when attempting to use the newer 2005 and newer Ford super duty axles. These brackets are sold as a pair and will need to be welded.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eFord Super Duty Dana 60 lower control arm mounts\u003c\/li\u003e\r\n\u003cli\u003eLaser cut 1\/4 inch steel brackets\u003c\/li\u003e\r\n\u003cli\u003eMounting width of approximately 2.625 inch wide\u003c\/li\u003e\r\n\u003cli\u003eSold as pair\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAvailable in a 5\/8 (.563\"), 9\/16 (.625\"), or 3\/4 (.750\") inch bolt hole\u003c\/li\u003e\r\n\u003cli\u003eYou will still need to cut away much of the brackets and cast housing to make room for the mounts\u003c\/li\u003e\r\n\u003cli\u003eRequires welding\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"9\/16 Inch (.563)","offer_id":32100323622996,"sku":"MB4015-563","price":49.99,"currency_code":"USD","in_stock":true},{"title":"3\/4 inch (.750)","offer_id":32100323655764,"sku":"MB4015-750","price":49.99,"currency_code":"USD","in_stock":true},{"title":"5\/8 inch (.625)","offer_id":42249113239636,"sku":"MB4015-625","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb4015-1.jpg?v=1587754975"},{"product_id":"gm-14-bolt-lower-link-kit-or-4-link-system","title":"14 Bolt Lower Link Tab Kit for MB1503 or Universal","description":"\u003cp\u003eThe Motobilt lower axle link brackets are laser cut from 3\/8\" steel plate. The mounts are designed to fit the GM 14 bolt axle housing tubes. They are offset to allow the rod end and to achieve maximum articulation. They include a 3\/4 inch bolt hole. They can be used for other applications but were designed to be used with the Motobilt Jeep YJ and TJ 4 link bracket system on the lower front links. These are sold in a complete set of 2 Pairs or enough to do one axle.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eGM 14 bolt lower link kit\u003c\/li\u003e\r\n\u003cli\u003eJeep YJ and TJ\u003c\/li\u003e\r\n\u003cli\u003eCNC laser cut 3\/8\" steel plate \u003c\/li\u003e\r\n\u003cli\u003e3\/4 inch bolt hole\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight = 5lbs\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32100334567508,"sku":"MB4014","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB4014-view-1.jpg?v=1587754352"},{"product_id":"dana-60-lower-link-mount-kit-for-4-link-system","title":"Dana 60 Angled Lower Link Mount Kit","description":"\u003cp\u003eThe Motobilt Dana 60 lower link mounts are cnc laser cut 3\/8\" thick steel plate. The mounts are designed to fit the Dana 60 axle housing tubes which are 3 to 3.25”s in diameter. They are offset to allow the rod end and to achieve maximum articulation. They are made with a 3\/4 inch bolt hole.\u003c\/p\u003e\r\n\u003cp\u003eThey can be used in other applications but were designed to be used with the Motobilt Jeep YJ and TJ 4 link bracket system on the lower front links. These are sold in a complete set of 2 Pairs or enough to do one axle.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDana 60 lower link mounts\u003c\/li\u003e\r\n\u003cli\u003e3\/8\" laser cut steel plate\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e3\/4 inch bolt hole\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCan be used in other applications but were designed to be used with the Motobilt Jeep YJ and TJ 4 link bracket system on the lower front links MB1503\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32100343414868,"sku":"MB4006","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB4006-view-1.jpg?v=1587754461"},{"product_id":"adjustable-track-bar-bracket-steel","title":"Adjustable Track Bar Bracket","description":"\u003cp\u003eThe Motobilt adjustable track bar bracket is built to take the any abuse you can dish out. This bracket is laser cut from 1\/4 inch thick steel plate and CNC formed. The bracket consists of 3 pieces that will need to be welded for install. The brackets utilize 3 different holes that measure 5\/8 inch in diamter. The bracket is also offset so that it will clear your other suspension components. \u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eLaser cut from 1\/4 inch thick steel plate\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eBracket utilize 3 different holes that measure 5\/8 inch in diameter and mounting width of 1 3\/4 inches\u003c\/li\u003e\r\n\u003cli\u003eBracket is also offset so that it will clear your other suspension components\u003c\/li\u003e\r\n\u003cli\u003eSold as each\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThe bracket consists of 3 pieces that will need to be welded for install\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"3 inch","offer_id":32110131216468,"sku":"MB1542-175-300","price":39.99,"currency_code":"USD","in_stock":true},{"title":"3.25 Inch","offer_id":32110131249236,"sku":"MB1542-175-325","price":39.99,"currency_code":"USD","in_stock":true},{"title":"3.5 Inch","offer_id":32110131282004,"sku":"MB1542-175-350","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb1542-1.jpg?v=1587754981"},{"product_id":"axle-tab","title":"4 Link Axle Tab For 4” Axle Tube Diameter","description":"\u003cmeta charset=\"UTF-8\"\u003e\r\n\u003cdiv role=\"tabpanel\" aria-hidden=\"false\" aria-labelledby=\"st-link-description_0-0\" id=\"st-description_0-0\" class=\"station-tabs-content station-tabs-default-tabpanel is-active\"\u003e\r\n\u003cdiv class=\"station-tabs-content-inner\"\u003e\r\n\u003cp\u003eThe Motobilt 4 link axle tabs are laser cut out of 3\/8\" steel plate. These brackets are built with pure strength in mind! We offer these brackets for just about every axle and link combination out there. In the case of the Motobilt 4 link long axle tabs we thought of everything! You get to choose your bolt hole size from 1\/2 inch to 3\/4 inch. The link bracket measures 4 inches from center of bolt hole to the axle tube and will fit your 4” axle tube diameters. \u003c\/p\u003e\r\n\u003cp\u003eThis is a DIY tab for fabrication.  Welding is required. The brackets are listed as one each.  If you need four you will need to indicate that in the quantity field when ordering. \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e4 Link axle tab\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAxle Tube diameter 4 inch\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"Motobilt","offers":[{"title":"1\/2\"","offer_id":39999028592724,"sku":"MB2176-500","price":4.99,"currency_code":"USD","in_stock":true},{"title":"3\/4\"","offer_id":39999028625492,"sku":"MB2176-750","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB2176-500-view-1.jpg?v=1679433235"},{"product_id":"4-inch-tube-lower-link-mount-front-axle","title":"4 Inch Tube Lower Link Mount for Front Axle","description":"\u003cp\u003eUpgrade your vehicle's suspension setup with the MB1570 Lower Link Mount for the Front Axle, a universal fit solution designed to enhance the durability and performance of your off-road rig. Precision-engineered for those who demand the best in strength and reliability.\u003c\/p\u003e\r\n\u003cp\u003eThis lower link bracket set is laser cut form high strength .250\" steel plate and the formed on our CNC press brakes here at Motobilt.  This lower link bracket setup is designed to specifically fit 4\" diameter axle tubes. These are the same brackets used for the front lower mounts on the project El-Jefe Jeep YJ build.  \u003c\/p\u003e\r\n\u003ch4\u003eFit:\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eUniversal:\u003c\/strong\u003e Designed to fit a wide range of vehicles, making it a versatile choice for custom builds and modifications.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eAxle Tube Diameter:\u003c\/strong\u003e Designed for 4\" axle tubes but will fit 3.5” as well\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eBolt Hole Size: 5\/8\u003c\/strong\u003e”\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eLink Angle: \u003c\/strong\u003eThese mounts angle inward at 16 degrees. \u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eProudly Made in the USA:\u003c\/strong\u003e Crafted with the highest standards of quality and durability in mind, ensuring a product that withstands the toughest conditions.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eRobust Construction:\u003c\/strong\u003e Made from premium materials to offer unparalleled strength and longevity.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e Each mount measures 3.9\" in height, 3.7\" in width, and 5\" in depth, providing a compact yet sturdy base for your lower links.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Weighing in at 7.8 lbs, these mounts add minimal weight to your setup while offering maximum support and rigidity.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1570_-_Shipping.pdf?v=1709653427\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":40482202255444,"sku":"MB1570","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1570-1.jpg?v=1715618792"},{"product_id":"lower-link-mount-rear-axle","title":"4\" Tube Triangulated Lower Link Mount for Rear Axle","description":"\u003cdiv\u003e\r\n\u003cdiv class=\"flex-shrink-0 flex flex-col relative items-end\"\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv class=\"pt-0.5\"\u003e\r\n\u003cdiv class=\"gizmo-shadow-stroke flex h-6 w-6 items-center justify-center overflow-hidden rounded-full\"\u003e\u003cbr\u003e\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv class=\"relative flex w-full flex-col agent-turn\"\u003e\r\n\u003cdiv class=\"flex-col gap-1 md:gap-3\"\u003e\r\n\u003cdiv class=\"flex flex-grow flex-col max-w-full\"\u003e\r\n\u003cdiv data-message-author-role=\"assistant\" data-message-id=\"ae5444ac-2542-42c1-a9d5-90574e1cc49c\" class=\"min-h-[20px] text-message flex flex-col items-start gap-3 whitespace-pre-wrap break-words [.text-message+\u0026amp;]:mt-5 overflow-x-auto\"\u003e\r\n\u003cdiv class=\"markdown prose w-full break-words dark:prose-invert light\"\u003e\r\n\u003cp\u003eUpgrade your vehicle's suspension setup with the MB1571 Triangulated Lower Link Mount for the Rear Axle, a universal fit solution designed to enhance the durability and performance of your off-road rig. Precision-engineered for those who demand the best in strength and reliability, this mount is an essential component for any serious off-roader or custom vehicle builder. This part is laser cut from .250\" high strength steel and formed on our CNC press brakes here at Motobilt.  This mount is sold in a pair for the lower links and designed with rear axle tubes in mind where there is more clearance around the differential. Works great in a double triangulated 4 link suspension such as the El-Jefe Jeep YJ build, the BlackOut JKU build, or the Red JLU double triangulated 4 link rear. \u003c\/p\u003e\r\n\u003ch4\u003eFit:\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eUniversal:\u003c\/strong\u003e Designed to fit a wide range of vehicles, making it a versatile choice for custom builds and modifications.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eAxle Tude Diameter:\u003c\/strong\u003e Designed to fit 3.5” to 4\" axle tubes. \u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eBolt Hole Size: 5\/8”\u003c\/strong\u003e\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eLink Angle: \u003c\/strong\u003eThese mounts are angled inward at 25 degrees each.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eProudly Made in the USA:\u003c\/strong\u003e Crafted with the highest standards of quality and durability in mind, ensuring a product that withstands the toughest conditions.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eRobust Construction:\u003c\/strong\u003e Made from premium materials to offer unparalleled strength and longevity.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e Each mount measures 3.8\" in height, 7.6\" in width, and 6.2\" in depth, providing a compact yet sturdy base for your lower links.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Weighing in at 11.5 lbs, these mounts add minimal weight to your setup while offering maximum support and rigidity.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eSold as a\u003c\/strong\u003e pair\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1571_-_Shipping.pdf?v=1709653918\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":40482216935508,"sku":"MB1571","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1571-parts.jpg?v=1715613200"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/collections\/MB1571-parts.jpg?v=1794064646","url":"https:\/\/motobilt.com\/collections\/lower-link-mounts\/link-mounts-axle-tabs.oembed","provider":"Motobilt","version":"1.0","type":"link"}