{"title":"Suspension Kits","description":"","products":[{"product_id":"jeep-yj-4-link-suspension-mount-kit-skid","title":"4 Link Suspension Mount Skid System for Jeep YJ","description":"\u003cp\u003eBuilding high quality fabricated products for offroad vehicles is the mission. The Motobilt Jeep YJ Four Link Suspension Kit consists of an assembly that mounts to the frame and houses both the upper and lower links for the front and rear 4 link suspension. This kit was designed to make it easier to install 4 linked suspension by taking out the guess work. The kit is fabricated from high strength CNC laser cut steel plate. The main bodies where the links bolt in and the skid are all 1\/4 inch steel plate for ultimate strength.\u003c\/p\u003e\r\n\u003cp\u003eSome of the secondary plates to box in the link mounts and internal gusseting are 3\/16 inch steel plate. The design comes to you fully welded and ready to install into the Jeep. Once receiving the kit you will be required to weld the parts in place. The parts are located very easily with the factory skid plate mounting holes. This kit was used in this build.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eThe Motobilt Jeep YJ 4 link kit is very simple to install.  Once the factory spring hangers are removed you will bolt the link mount sections to the factory skid plate mounting locations.   \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e Then attach the skid plate we provide with the kit.  This kit does require welding to the frame.  It is NOT simply a bolt in kit. \u003c\/p\u003e\r\n\u003cp\u003eThe Motobilt YJ 4 link mounting system can easily be modified to a front 3 link if required.  Simply remove the upper link mount on the front not being used.  We offer the track bar brackets that can be used also if running the front in a 3-link configuration.\u003cbr\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eThe kit was designed with a wheelbase range of 104 to 118 inches.  \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eThe link mounts were built with strength in mind as they are completely boxed.  The skid and main sections of the link mounts are 1\/4\" steel.  The lower link mounts were designed with 1.25\" x 1\" rod ends with 1\" x 3\/4\" high misalignment spacers.  The mounting width of the lower link boxes are 2.63 wide.  Johnny Joints with the same 2.63\" mounting width can be used but may require weld washers to change the bolt hole size which is 3\/4\".\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eThe upper link mounts were designed for 7\/8\" x 3\/4\" rod ends with 3\/4\" x 5\/8\" high misalignment spacers.  The uppers will not work with Johnny Joints.  We chose the 7\/8\" rod ends to keep the mounts tight to the frame rails up front.  By doing so it allows for  many different engine setups.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\r\n\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\r\n\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep YJ Four Link assembly suspension kit\u003c\/li\u003e\r\n\u003cli\u003eFabricated from high strength CNC laser cut steel plate\u003c\/li\u003e\r\n\u003cli\u003eThe main bodies where the links bolt in and the skid are all 1\/4 inch steel plate for ultimate strength\u003c\/li\u003e\r\n\u003cli\u003eSecondary plates to box in the link mounts and internal gusseting are 3\/16 inch steel plate\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003cli\u003eWeight: 125lbs (approx.)\u003c\/li\u003e\r\n\u003cli\u003eSuggested Parts Not Included below:\u003c\/li\u003e\r\n\u003cli\u003e\u003ca href=\"https:\/\/motobilt.com\/products\/universal-transmission-cross-member-kit\" target=\"_blank\"\u003eUniversal Transmission Cross member kit par number MB3077\u003c\/a\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWelding required\u003c\/li\u003e\r\n\u003cli\u003eFrame plate 1503-02 is a spacer that mounts between the frame and the skid mounts to fill the gap when welding the skid mounts to the frame.\u003c\/li\u003e\r\n\u003cli\u003eYou do NOT have to remove the body to install.\u003c\/li\u003e\r\n\u003cli\u003eIf you are trying to install a Johnny style joint in the lower link mounts then the \u003ca href=\"https:\/\/motobilt.com\/products\/reducer-spacer-weld-washer-3-4-to-5-8\" rel=\"noopener\" target=\"_blank\"\u003eMB1575\u003c\/a\u003e weld\/reducer washers will allow you to weld into the lower link mounts and convert them from a 3\/4” hole to a 9\/16” hole which is a more common size for Johnny Joint style ends.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eRecommended Suspension Joints: \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/Recomended_Heim_Joints.pdf?v=1695048835\" target=\"_blank\"\u003e\u003cstrong\u003eSize Chart-Click Here\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e1.25 inch rod ends with 1 inch bolt hole for lower links\u003c\/li\u003e\r\n\u003cli\u003e1 inch to 3\/4 inch 303 stainless high misalignment spacers measuring 2 5\/8 inches in width\u003c\/li\u003e\r\n\u003cli\u003e7\/8 inch rod ends with 3\/4 inch bolt holes\u003c\/li\u003e\r\n\u003cli\u003e3\/4 inch to 5\/8 inch 303 stainless high misalignment spacers measuring 1 3\/4 inches in width\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1503_-_Shipping_b802c22a-4639-471e-84cc-e41f032ead39.pdf?v=1740609136\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003cspan\u003eIf using an Apple device and the instructions link does not work, then click on the link below and hold down to download the link.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1503_-_Assembly_Instructions_2.pdf?v=1701284661%E2%80%9D\" class=\"btn\"\u003eInstructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32084203896916,"sku":"MB1503","price":1469.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/Stretch_and_Full_Width__83_of_19__preview.jpg?v=1590186123"},{"product_id":"rockwell-link-plates-rear-upper","title":"Rockwell Upper Link Mount Brackets Tall \/ Rear or Front","description":"\u003cp\u003eThis premium builder kit consists of four (4) 3\/8” thick riser plates, two (2) 3\/8” thick inner gusset plates \u0026amp; four (4) 1\/4” thick CNC formed steel outer gusset plates.  The vertical separation between the lower link pivots (Kit # MB2124 sold separately) \u0026amp; this rear upper link plate kit is 12” vertically.  The axis of the upper pivot is on center with the axle \u0026amp; is positioned 10” vertically from the topside of the axle.  Inside dimension of the riser plates measures 2-5\/8” with holes to fit 3\/4” diameter bolts.  The riser plates are designed to straddle three sides of the axle so you can get the most amount of weld for strength.\u003c\/p\u003e\r\n\u003cp\u003eThe inner gusset plates feature keyed slots for interlock positioning with the riser plates.  We could have stopped right there \u0026amp; this would be one of the strongest Rockwell upper link mounts available, however, we took it one step further.  We then completely boxed in the risers \u0026amp; inner gussets with precision CNC formed outer gussets.\u003c\/p\u003e\r\n\u003cp\u003eWhy is this important?\u003c\/p\u003e\r\n\u003cp\u003eIf you’re running heavy duty Rockwell axles on your rig, you’re doing it for the absolute most strength you can get in an axle.  Why shouldn’t the connection between your axle \u0026amp; your chassis be even stronger than the axle itself?  The added benefit of boxing in the whole mount is there are zero areas for mud \u0026amp; water to get trapped creating corrosion.  This also makes cleaning \u0026amp; maintenance a breeze.\u003c\/p\u003e\r\n\u003cp\u003eNo other Rockwell axle link plate kit available on the market features this level of overkill.  Ours does.\u003c\/p\u003e\r\n\u003cp\u003eThat’s why\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32084405682260,"sku":"MB2126","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB2126-view-2.jpg?v=1587754922"},{"product_id":"rockwell-link-plates-front-upper","title":"Rockwell Upper Link Brackets Short \/ Front","description":"\u003cp\u003eThis premium builder kit consists of four (4) 3\/8” thick riser plates, two (2) 3\/8” thick inner gusset plates \u0026amp; four (4) 1\/4” thick CNC formed steel outer gusset plates.  The vertical separation between the lower link pivots (Kit # MB2124 sold separately) \u0026amp; this front upper link plate kit is 9” vertically.  The axis of the upper pivot is on center with the axle \u0026amp; is positioned 7” vertically from the topside of the axle.  Inside dimension of the riser plates measures 2-5\/8” with holes to fit 3\/4” diameter bolts.  The riser plates are designed to straddle three sides of the axle so you can get the most amount of weld for strength.\u003c\/p\u003e\r\n\u003cp\u003eThe inner gusset plates feature keyed slots for interlock positioning with the riser plates.  We could have stopped right there \u0026amp; this would be one of the strongest Rockwell upper link mounts available, however, we took it one step further.  We then completely boxed in the risers \u0026amp; inner gussets with precision CNC formed outer gussets.\u003c\/p\u003e\r\n\u003cp\u003eWhy is this important?\u003c\/p\u003e\r\n\u003cp\u003eIf you’re running heavy duty Rockwell axles on your rig, you’re doing it for the absolute most strength you can get in an axle.  Why shouldn’t the connection between your axle \u0026amp; your chassis be even stronger than the axle itself?  The added benefit of boxing in the whole mount is there are zero areas for mud \u0026amp; water to get trapped creating corrosion.  This also makes cleaning \u0026amp; maintenance a breeze.\u003c\/p\u003e\r\n\u003cp\u003eNo other Rockwell axle link plate kit available on the market features this level of overkill.  Ours does.\u003c\/p\u003e\r\n\u003cp\u003eThat’s why.\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32084413317204,"sku":"MB2125","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/IMG_1491.jpg?v=1587754921"},{"product_id":"rockwell-axle-lower-link-plate-kit","title":"Rockwell Axle Lower Link Bracket Kit","description":"\u003cp\u003eThis premium builder kit consists of four (4) 3\/8” thick laser cut steel plates \u0026amp; two (2) 1\/4” thick CNC formed steel gussets.  This kit can be used on either the front or rear axle.\u003c\/p\u003e\r\n\u003cp\u003eThese heavy duty lower link mounts are angled at 20 degrees inwards \u0026amp; precisely fit around the square Rockwell axle shape.  The hole size accepts 3\/4” bolts.  The axis of the pivot bolts is designed at 2” down from the top of the axle, placing the holes 1\/4” below the center of the axle.  The underside of the link plates sit flush with the underside of the axle to provide the maximum amount of ground clearance with the added benefit of providing no low points to hook up on obstacles.  The inside spacing of the link plates is 2-5\/8”.  The precision formed steel gusset plates provided with the kit, tie both link plates together with an easy to position \u0026amp; easy to weld “open corner”.\u003c\/p\u003e\r\n\u003cp\u003eFrom our years of experience building rock crawlers, we constantly think about you, the builder, that’s why we have even added a relief notch in the link plates to fit over the topside seam weld present on Rockwell axles.  This saves a bit of grinding when prepping your axle for welding.  In our minds, it’s the small details that make this a superior builder product.\u003c\/p\u003e\r\n\u003cp\u003eThis product ships as unwelded raw steel.\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32084434157652,"sku":"MB2124","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB2124-view-1.jpg?v=1587754920"},{"product_id":"weld-on-tube-armor","title":"Weld On Tube Armor","description":"\u003cp\u003eThe Motobilt MB1041 weld on tie rod\/link armor is made out of heavy duty 3\/16 inch thick steel plate that is both laser cut and CNC bent.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWeld on tube armor\u003c\/li\u003e\r\n\u003cli\u003eLaser cut and CNC bent of 3\/16 thick steel plate\u003c\/li\u003e\r\n\u003cli\u003eComes in lengths of 42 inches and has many uses\u003c\/li\u003e\r\n\u003cli\u003eEasily cut down into smaller sections\u003c\/li\u003e\r\n\u003cli\u003eWeld it to your tie rod, suspension links, or other tube type armor\u003c\/li\u003e\r\n\u003cli\u003eStrengthens tubing while preventing it from denting or caving upon impact\u003c\/li\u003e\r\n\u003cli\u003eUses for this armor are endless\u003c\/li\u003e\r\n\u003cli\u003eSold as each\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32087815159892,"sku":"MB1041-1","price":19.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb1041_1.jpg?v=1587755009"},{"product_id":"jeep-tj-lj-4-link-suspension-mount-skid-system","title":"4 Link Suspension Mount Skid System for Jeep TJ \/ LJ","description":"\u003cp\u003eIf you are looking to swap your Jeep TJ or LJ to a 4 link suspension then this is the kit for you.  The rear utilizes a 4 link design while the front can be used as a 3 or 4 link.  This is the new 4 link assembly for the frame side on a Jeep TJ. Building high quality fabricated products for offroad vehicles is the mission. The Motobilt Jeep TJ \/ LJ Four Link Suspension Kit consists of an assembly that mounts onto the frame and houses both the upper and lower links for the front and rear 4 link suspension. This kit was designed to make it easier to install 4 linked suspension by taking out the guess work.\u003c\/p\u003e\r\n\u003cp\u003eThe kit is fabricated from high strength CNC laser cut steel plate. The main bodies where the links bolt in and the skid are all 1\/4 inch steel plate for ultimate strength. Some of the secondary plates to box in the link mounts and internal gusseting are 3\/16 inch steel plate. The design comes to you fully welded and ready to install into the Jeep. Once receiving the kit you will be required to weld the parts in place. The parts are located very easily with the factory skid plate mounting holes.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep TJ \/LJ Four Link Suspension Kit\u003c\/li\u003e\r\n\u003cli\u003eFront can be run as a 3 link with a track bar also.\u003c\/li\u003e\r\n\u003cli\u003eMain bodies 1\/4 inch steel plate\u003c\/li\u003e\r\n\u003cli\u003eSecondary plates 3\/16 inch steel plate\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight: 126lbs (approx.)\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003cli\u003eSuggested Parts Not Included below:\u003c\/li\u003e\r\n\u003cli\u003e\u003ca href=\"https:\/\/motobilt.com\/products\/universal-transmission-cross-member-kit\" target=\"_blank\"\u003eUniversal Transmission Cross member kit par number MB3077\u003c\/a\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRequires welding the parts in place\u003c\/li\u003e\r\n\u003cli\u003eThe front suspension can be run as a 3 link which is often used with a track bar when running a traditional steering box or hydraulic assist to prevent bump steer.\u003c\/li\u003e\r\n\u003cli\u003eIf you are utilizing hydraulic steering then you can run the front as true 4 link front. \u003c\/li\u003e\r\n\u003cli\u003eYou do NOT have to remove the body to install.\u003c\/li\u003e\r\n\u003cli\u003eIf you are trying to install a Johnny style joint in the lower link mounts then the \u003ca href=\"https:\/\/motobilt.com\/products\/reducer-spacer-weld-washer-3-4-to-5-8\" rel=\"noopener\" target=\"_blank\"\u003eMB1575\u003c\/a\u003e weld\/reducer washers will allow you to weld into the lower link mounts and convert them from a 3\/4” hole to a 9\/16” hole which is a more common size for Johnny Joint style ends.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eRecommended Suspension Joints: \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/Recomended_Heim_Joints.pdf?v=1695048835\" class=\"btn\" target=\"_blank\"\u003eSize Chart-Click Here\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThe lower links will require a heim joint with a 1 1\/4 inch threaded shank and bolt hole size of 1 inch.  The 1” bolt hole will be reduced to a 3\/4” bolt hole using 1 inch to 3\/4 inch high misalignment spacers measuring 2 5\/8 inches in width\u003c\/li\u003e\r\n\u003cli\u003eThe upper links use 7\/8 inch threaded shank heim joint with 3\/4 inch bolt hole that will be reduced to a 5\/8 inch hole using a 3\/4 inch to 5\/8 inch high misalignment spacers measuring 1 3\/4 inches in width\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cdiv class=\"field-label\"\u003e\u003cstrong\u003eKit Components: \u003c\/strong\u003e\u003c\/div\u003e\r\n\u003cdiv class=\"field-label\"\u003e\r\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv class=\"field-items\"\u003e\r\n\u003cdiv class=\"field-item even\"\u003e\r\n\u003cp\u003e\u003cspan\u003eThe Motobilt Jeep TJ 4 link kit is very simple to install.  Once the factory spring hangers are removed you will bolt the link mount sections to the factory skid plate mounting locations.   \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e Then attach the skid plate we provide with the kit.  This kit does require welding to the frame.  It is NOT simply a bolt in kit. \u003c\/p\u003e\r\n\u003cp\u003eThe Motobilt TJ 4 link mounting system can easily be modified to a front 3 link if required.  Simply remove the upper link mount on the front not being used.  We offer the track bar brackets that can be used also if running the front in a 3-link configuration.\u003cbr\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eThe kit was designed with a wheelbase range of 104 to 118 inches.  \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eThe link mounts were built with strength in mind as they are completely boxed.  The skid and main sections of the link mounts are 1\/4\" steel.  The lower link mounts were designed with 1.25\" x 1\" rod ends with 1\" x 3\/4\" high misalignment spacers.  The mounting width of the lower link boxes are 2.63 wide.  Johnny Joints with the same 2.63\" mounting width can be used but may require weld washers to change the bolt hole size which is 3\/4\".\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eThe upper link mounts were designed for 7\/8\" x 3\/4\" rod ends with 3\/4\" x 5\/8\" high misalignment spacers.  The uppers will not work with Johnny Joints.  We chose the 7\/8\" rod ends to keep the mounts tight to the frame rails up front.  By doing so it allows for  many different engine setups.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb1517_-_shipping_318e330e-9c3a-437a-860d-19f45edc97ce.pdf?v=1740609136\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003cspan\u003eIf using an Apple device and the instructions link does not work, then click on the link below and hold down to download the link.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1517_-_Assembly_Insctrutions.pdf?v=1701284480%E2%80%9D\" class=\"btn\"\u003eInstructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32088013865044,"sku":"MB1517","price":1469.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/Stretch_and_Full_Width__82_of_19__preview.jpg?v=1590186121"},{"product_id":"ford-dana-60-axle-truss-and-steering-mount-78-79-f-350","title":"Ford Dana 60 Front Axle Truss w\/ Steering Ram Mount 78-79","description":"\u003cp\u003eThe Motobilt Ford Dana 60 early king pin axle truss is laser cut and bent out of 3\/8 inch high strength steel for the main structure. This kit was designed specifically for the 1978 to 1979 Ford King Pin dana 60 found in 250\/350's. The truss spans the length of the axle, and includes in an integrated hydraulic ram mount for full hydraulic steering. The design is meant for a 2.5 inch-2.75 inch double ended ram. The ram is completely protected from underneath with a full skid plate to keep it safe from rocks.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThis new kit consists of a full length axle truss and integrated steering ram mount. The main truss is made from massive 3\/8 inch thick steel plate that is both laser cut and CNC bent for a precise fit. There is significant bracing internally with the use of 3\/8 inch and 3\/16 inch thick mounts.\u003c\/li\u003e\r\n\u003cli\u003eNot only is your axle going to have superior strength it will also have a high clearance mount to protect your 2.5-2.75 inch double ended steering ram. This mount allows you to tuck the ram up out of harms way and is completely protected with 1\/4 inch thick cnc bent steel plate.\u003c\/li\u003e\r\n\u003cli\u003eOn top connecting the truss to the front of the steering ram mount is a bracket that provides extra strength and serves as a winch suck down point. A small d ring shackle can be mounted here so that you can attach your winch to it when attempting those extreme climbs. Once you attach and pull the winch tight you decrease your chances of the rig unloading on those steep ledges.\u003c\/li\u003e\r\n\u003cli\u003eAnother awesome option provided are the 2 holes on each end of the truss. These holes can also act as points for a small d ring to be attached.\u003c\/li\u003e\r\n\u003cli\u003eWhen designing the steering ram mount we paid special attention to make sure that the ram was placed optimally to work with correctly with after market steering arms.\u003c\/li\u003e\r\n\u003cli\u003eA removable skid plate around the differential cover allows for full accessibility to work on your differential.\u003c\/li\u003e\r\n\u003cli\u003eThe entire system is designed with keyway fitments to ensure a true and straight forward install.\u003c\/li\u003e\r\n\u003cli\u003eWe have additional mounts for coil overs, link tabs, and hydraulic steering rams available for purchase separately and are not included with this kit.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eProfessional welding is required to install this system properly.\u003c\/li\u003e\r\n\u003cli\u003eWeight: 80lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eSuggested Parts:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003ca href=\"https:\/\/motobilt.com\/products\/upper-link-mount-front-axle\" rel=\"noopener\" target=\"_blank\"\u003eMB1568\u003c\/a\u003e - Universal Upper Triangulated Link Mount - Front Axle\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/dana-60-lower-link-mount-kit-for-4-link-system\" target=\"_blank\"\u003eMB4006\u003c\/a\u003e - Dana 60 Angled Lower Link Mount Kit\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/dana-60-diff-cover?variant=32072358461524\" target=\"_blank\"\u003eMB4010\u003c\/a\u003e - Dana 60 Heavy Duty Diff Cover\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb4071_-_shipping.pdf?v=1660770107\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eAxle Truss Prep\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" rel=\"noopener noreferrer\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/SD60_Truss_Preperation_Instructions.pdf?v=1617719353\" target=\"_blank\"\u003eAxle Truss Prep\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32093276897364,"sku":"MB4071","price":529.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/4071_-_ford_kingpin_full_hydro_-_2_37053.jpg?v=1587754479"},{"product_id":"ford-super-duty-dana-60-axle-truss","title":"Super Duty Dana 60 Axle Truss 05-up","description":"\u003cp\u003eThe Ford Super Duty Dana 60 truss from Motobilt will greatly increase the strength of your front axle. The main structure of this axle truss is laser cut and cnc bent from 3\/8 inch thick steel plate. Supporting the main truss are 3\/8 inch and 3\/16 inch structural bracing. The top portion of the truss is approximately 5.5 inches wide and provides ample room for a suspension link mount to be welded onto it. Can be used for a 3 or 4 link setup.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\r\n\u003cli\u003eThickness: 3\/8 Inch\u003c\/li\u003e\r\n\u003cli\u003e3\/8 inch thick laser cut steel plate main truss\u003c\/li\u003e\r\n\u003cli\u003e3\/8 inch and 3\/16 inch steel plate support structure\u003c\/li\u003e\r\n\u003cli\u003eFull length span of axle for increased strength\u003c\/li\u003e\r\n\u003cli\u003eLarge flat mounting surface for link brackets.\u003c\/li\u003e\r\n\u003cli\u003eNotes: Requires removal of factory brackets and housing on driver's side must be trimmed aproximately 2 inches\u003c\/li\u003e\r\n\u003cli\u003eFits: 2005 and Up Ford Super Duty\u003c\/li\u003e\r\n\u003cli\u003eWeight: 55lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eApproximately 2”s of the short side cast housing will have to be removed along with the other factory brackets.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eSuggested Parts:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003ca href=\"https:\/\/motobilt.com\/products\/high-steer-brackets-for-super-duty-60?_pos=2\u0026amp;_psq=steering\u0026amp;_ss=e\u0026amp;_v=1.0\" rel=\"noopener\" target=\"_blank\"\u003eMB4082\u003c\/a\u003e - High Steer Brackets\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003ca href=\"https:\/\/motobilt.com\/products\/ford-super-duty-dana-60-lower-link-mounts-9-16-inch-bolt-hole?_pos=2\u0026amp;_psq=super+duty\u0026amp;_ss=e\u0026amp;_v=1.0\" rel=\"noopener\" target=\"_blank\"\u003eMB4015\u003c\/a\u003e - Super Duty Dana 60 Lower Link Mount Kit\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003ca href=\"https:\/\/motobilt.com\/products\/super-duty-dana-60-diff-cover\" rel=\"noopener\" target=\"_blank\"\u003eMB4043\u003c\/a\u003e - Super Duty Dana 60 heavy Duty Diff Cover\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003ca href=\"https:\/\/motobilt.com\/products\/adjustable-track-bar-bracket-steel\" target=\"_blank\" rel=\"noopener\"\u003eMB1542-175-350 \u003c\/a\u003e- Track Bar Bracket Adjustable \u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" rel=\"noopener noreferrer\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb4076_-_shipping.pdf?v=1660769656\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eAxle Truss Prep\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" rel=\"noopener noreferrer\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/SD60_Truss_Preperation_Instructions.pdf?v=1617719353\" target=\"_blank\"\u003eAxle Truss Prep\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32093289152596,"sku":"MB4076","price":309.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb4076-1.jpg?v=1720539490"},{"product_id":"f-250-f-350-super-duty-dana-60-axle-truss-and-steering-mount-05-present","title":"Super Duty Dana 60 Axle Truss \/ Steering Ram Mount 05-up","description":"\u003cp\u003eThe Motobilt Ford Super Duty Dana 60 axle truss is laser cut and bent out of 3\/8 inch high strength steel for the main structure. This kit was designed specifically for the 2005 to 2022 Ford F-250 and F350 Dana 60 front axles. (NOT M256)\u003c\/p\u003e\r\n\u003cp\u003eThe truss spans the length of the axle, and includes in an integrated hydraulic ram mount for full hydraulic steering. The design is meant for a 2.5 inch-2.75 inch double ended ram. The ram is completely protected from underneath with a full skid plate to keep it safe from rocks.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\r\n\u003cli\u003eThickness: 3\/8 Inch\u003c\/li\u003e\r\n\u003cli\u003eThis new kit consists of a full length axle truss and integrated steering ram mount. The main truss is made from massive 3\/8 inch thick steel plate that is both laser cut and cnc bent for a precise fit. There is significant bracing internally with the use of 3\/8 inch and 3\/16 inch thick mounts.\u003c\/li\u003e\r\n\u003cli\u003eNot only is your axle going to have superior strength it will also have a high clearance mount to protect your 2.5 inch-2.75 inch double ended steering ram. This mount allows you to tuck the ram up out of harms way and is completely protected with 1\/4 inch thick CNC bent steel plate.\u003c\/li\u003e\r\n\u003cli\u003eOn top connecting the truss to the front of the steering ram mount is a bracket that provides extra strength and serves as a winch suck down point. A small d ring shackle can be mounted here so that you can attach your winch to it when attempting those extreme climbs. Once you attach and pull the winch tight you decrease your chances of the rig unloading on those steep ledges.\u003c\/li\u003e\r\n\u003cli\u003eAnother awesome option provided are the 2 holes on each end of the truss. These holes can also act as points for a small d ring to be attached.\u003c\/li\u003e\r\n\u003cli\u003eWhen designing the steering ram mount we paid special attention to make sure that the ram was placed optimally to work with correctly with after market steering arms.\u003c\/li\u003e\r\n\u003cli\u003eA removable skid plate around the differential cover allows for full accessibility to work on your differential.\u003c\/li\u003e\r\n\u003cli\u003eWe have additional mounts for coil overs, link tabs, and hydraulic steering rams available for purchase separately and are not included with this kit.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eProfessional welding is required to install this system properly.\r\n\u003cul\u003e\r\n\u003cli\u003eWill NOT fit earlier model Super Duty axles. \u003c\/li\u003e\r\n\u003cli\u003eApproximately 2”s of the short side cast housing will have to be removed along with the other factory brackets. Refer to axle truss prep link below.\u003c\/li\u003e\r\n\u003cli\u003eTack weld and test for steering clearances before fully welding.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eWeight: 80lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eSuggested Parts:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/high-steer-brackets-for-super-duty-60?_pos=2\u0026amp;_psq=steering\u0026amp;_ss=e\u0026amp;_v=1.0\" target=\"_blank\"\u003eMB4082\u003c\/a\u003e - High Steer Brackets\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/ford-super-duty-dana-60-lower-link-mounts-9-16-inch-bolt-hole?_pos=2\u0026amp;_psq=super+duty\u0026amp;_ss=e\u0026amp;_v=1.0\" target=\"_blank\"\u003eMB4015\u003c\/a\u003e - Super Duty Dana 60 Lower Link Mount Kit\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/super-duty-dana-60-diff-cover\" target=\"_blank\"\u003eMB4043\u003c\/a\u003e - Super Duty Dana 60 heavy Duty Diff Cover\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/upper-link-mount-front-axle\" target=\"_blank\"\u003eMB1568\u003c\/a\u003e - Universal Upper Triangulated Link Mount - Front Axle\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb4072_-_shipping.pdf?v=1660769374\" rel=\"noopener noreferrer\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eAxle Truss Prep\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/SD60_Truss_Preperation_Instructions.pdf?v=1617719353\" rel=\"noopener noreferrer\" class=\"btn\" target=\"_blank\"\u003eAxle Truss Prep\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32093307404372,"sku":"MB4072","price":529.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/img_9016_1.jpg?v=1587754968"},{"product_id":"78-79-ford-dana-60-axle-truss","title":"78-79 Ford Dana 60 Axle Truss","description":"\u003cp\u003eThe 78-79 Dana 60 truss from Motobilt will greatly increase the strength of your front axle. The main structure of this axle truss is laser cut and cnc bent from 3\/8 inch thick steel plate. Supporting the main truss are 3\/8 inch and 3\/16 inch structural bracing. The top portion of the truss is approximately 5.5 inches wide and provides ample room for a suspension link mount to be welded onto it. This axle truss can be used for a 3 or 4 link setup.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\r\n\u003cli\u003eThickness: 3\/8 Inch\u003c\/li\u003e\r\n\u003cli\u003e3\/8 inch thick laser cut steel plate main truss\u003c\/li\u003e\r\n\u003cli\u003e3\/8 inch and 3\/16 inch steel plate support structure\u003c\/li\u003e\r\n\u003cli\u003eFull length span of axle for increased strength\u003c\/li\u003e\r\n\u003cli\u003eLarge flat mounting surface for link brackets\u003c\/li\u003e\r\n\u003cli\u003eWeight: 55lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eSuggested Parts:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003ca href=\"https:\/\/motobilt.com\/products\/upper-link-mount-front-axle\" rel=\"noopener\" target=\"_blank\"\u003eMB1568\u003c\/a\u003e - Universal Upper Triangulated Link Mount - Front Axle\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/dana-60-lower-link-mount-kit-for-4-link-system\" target=\"_blank\"\u003eMB4006\u003c\/a\u003e - Dana 60 Angled Lower Link Mount Kit\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/dana-60-diff-cover?variant=32072358461524\" target=\"_blank\"\u003eMB4010\u003c\/a\u003e - Dana 60 Heavy Duty Diff Cover\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/adjustable-track-bar-bracket-steel\" target=\"_blank\"\u003eMB1542\u003c\/a\u003e-  Track Bar Bracket\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb4070_-_shipping.pdf?v=1660770212\" rel=\"noopener noreferrer\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eAxle Truss Prep\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" rel=\"noopener noreferrer\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/SD60_Truss_Preperation_Instructions.pdf?v=1617719353\" target=\"_blank\"\u003eAxle Truss Prep\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32093328408660,"sku":"MB4070","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB4070-view-2.jpg?v=1587754395"},{"product_id":"chevy-dana-60-front-axle-truss-and-steering-mount","title":"Chevy Dana 60 Front Axle Truss \/ Steering Ram Mount","description":"\u003cp\u003eChevy full width Dana 60 Axle Truss System with integrated double ended steering ram mount. The Motobilt Chevy Dana 60 axle truss is laser cut and bent out of 3\/8 inch high strength steel for the main structure. The truss spans the length of the axle, and is included in an integrated hydraulic ram mount for full hydraulic steering.\u003c\/p\u003e\r\n\u003cp\u003eThe design is meant for a 2.5 inch double ended ram. The ram is completely protected from underneath with a full skid plate to keep it safe from rocks. The truss and steering ram mount are tied in together and a mount for a small clevis shackle is located on the front center of the steering ram mount. This mount is used to connect your winch to be used as a Suck Down winch point.\u003c\/p\u003e\r\n\u003cp\u003eThe entire system is designed with keyway fitments to ensure a true and straight forward install. Removable skid plate for diff cover is included for ease of access into the differential.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eChevy full width Dana 60 Axle Truss\u003c\/li\u003e\r\n\u003cli\u003eLaser cut 3\/8 inch high strength steel for the main structure\u003c\/li\u003e\r\n\u003cli\u003eRemovable skid plate for diff cover is included ( Diff cover not included )\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003cli\u003eWeight: 75lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eSuggested Parts:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003ca href=\"https:\/\/motobilt.com\/products\/upper-link-mount-front-axle\" rel=\"noopener\" target=\"_blank\"\u003eMB1568\u003c\/a\u003e - Universal Upper Triangulated Link Mount - Front Axle\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/dana-60-lower-link-mount-kit-for-4-link-system\" target=\"_blank\"\u003eMB4006\u003c\/a\u003e - Dana 60 Angled Lower Link Mount Kit\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/dana-60-diff-cover?variant=32072358461524\" target=\"_blank\"\u003eMB4010\u003c\/a\u003e - Dana 60 Heavy Duty Diff Cover\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eProfessional welding is required to install this system properly\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" rel=\"noopener noreferrer\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb4004_-_shipping.pdf?v=1660770008\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eAxle Truss Prep\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" rel=\"noopener noreferrer\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/SD60_Truss_Preperation_Instructions.pdf?v=1617719353\" target=\"_blank\"\u003eAxle Truss Prep\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32094091477076,"sku":"MB4004","price":529.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb4004-2.jpg?v=1587754427"},{"product_id":"ford-10-25-10-5-sterling-rear-axle-trail-truss","title":"Ford 10.25\/10.5 Sterling Rear Axle Truss \/ Trail Version","description":"\u003cp\u003eThis rear axle truss fits the Ford 10.25 \/ 10.5 Sterling rear axle. This Ford trail truss main structure is made from laser cut 3\/8 inch thick steel plate and the support structure from 1\/4 inch steel plate. The over all length of the truss is 27.25 inches. This is a low profile design so you will have plenty of clearance when mounting link tabs on top of the axle. This will fit a centered 10.25 or 10.5 rear axle.\u003c\/p\u003e\r\n\u003cp\u003eThe truss follows the contours of the cast center section very closely so due to variances over the years there may be some trimming needed. Due to its narrow design it will work with a link suspension or with leaf springs. The low profile design also makes it much easier to fit in many custom applications. This is a weld on design and consists of a main bridge structure and 2 support plates. It ships raw steel.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eFord 10.25 \/ 10.5 Sterling rear axle truss\u003c\/li\u003e\r\n\u003cli\u003eFit a centered 10.25 or 10.5 rear axle\u003c\/li\u003e\r\n\u003cli\u003e3\/8 inch thick steel plate\u003c\/li\u003e\r\n\u003cli\u003esupport structure from 3\/16 inch steel plate\u003c\/li\u003e\r\n\u003cli\u003eover all length of the trus is 27.25 inch\u003c\/li\u003e\r\n\u003cli\u003eShips raw steel\u003c\/li\u003e\r\n\u003cli\u003eSold as each\u003c\/li\u003e\r\n\u003cli\u003eWeight: 25lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eSuggested Parts\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/rear-upper-control-arm-mounts?variant=39434267492436\" target=\"_blank\"\u003eMB3049\u003c\/a\u003e -Rear Axle Upper Control Arm Link Mounts for Truss\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/lower-link-mount-rear-axle\" target=\"_blank\"\u003eMB1571\u003c\/a\u003e -  Triangulated Lower link Mount for Rear Axle\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/sterling-10-25-10-5-diff-cover?_pos=1\u0026amp;_psq=Sterling\u0026amp;_ss=e\u0026amp;_v=1.0\" target=\"_blank\"\u003eMB4032\u003c\/a\u003e - Sterling 10.25 \u0026amp; 10.5 Heavy Duty Diff Cover\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB4069_-_Shipping.pdf?v=1624994707\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32094220648532,"sku":"MB4069","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB4069-view-1.jpg?v=1625264622"},{"product_id":"link-mount-for-1-75-inch-tube-3-4-inch-bolt-holes-pairs","title":"Link Mount Brackets for Round Tube - Choose Bolt Hole Size","description":"\u003cp\u003eThe Motobilt link mounts are sold as a set of 2 pairs, four (4) plates in total. They can be mounted to 1.75 inch tube in order to mount your suspension links. They are laser cut in house at Motobilt from 3\/8 inch thick high strength steel plate and then press bent on our CNC brake. The width when installed is right around 2 5\/8 inch which will fit most rod end or johnny joints. Rod end, bolts, spacers are Not included\u003cbr\u003e\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eLink Mounts 1.75 inch tube with 3\/4 inch bolt holes\u003c\/li\u003e\r\n\u003cli\u003eLaser cut 3\/8 inch thick high strength steel plate\u003c\/li\u003e\r\n\u003cli\u003eBrake press bent\u003c\/li\u003e\r\n\u003cli\u003eSold as pair\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight = 5lbs\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRod end, bolts, spacers are Not included\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"1\/2\"","offer_id":39426621505620,"sku":"MB2097-500","price":49.99,"currency_code":"USD","in_stock":true},{"title":"5\/8\"","offer_id":39426621538388,"sku":"MB2097-625","price":49.99,"currency_code":"USD","in_stock":true},{"title":"3\/4\"","offer_id":39426621571156,"sku":"MB2097-750","price":49.99,"currency_code":"USD","in_stock":true},{"title":"1\"","offer_id":39426621603924,"sku":"MB2097-1","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb2097-750-install-1_1.jpg?v=1587754871"},{"product_id":"lower-link-mounts-10-degree-offset-pair","title":"Formed Lower Axle Link Mounts 10 Degree Offset","description":"\u003cp\u003eThe Motobilt lower link mounts are a secure way to mount your suspension links. They are made from 1\/4 inch thick steel plate that is laser cut and then cnc bent. These are designed to fit a 3 inch axle tube diameter. The Motobilt lower link mounts for your axle are sold as a pair which is enough to do one axles lower links. They come raw steel and will need to be professionally welded to your axle.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eLower link mounts 10 degree of offset \u003c\/li\u003e\r\n\u003cli\u003eLaser cut 1\/4 inch thick steel plate\u003c\/li\u003e\r\n\u003cli\u003eDesigned to fit a 3 inch axle tube diameter\u003c\/li\u003e\r\n\u003cli\u003eSold as pair\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eShips raw steel\u003c\/li\u003e\r\n\u003cli\u003eNeed to be professionally welded to your axle\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"1\/2 Inch","offer_id":32095619154004,"sku":"MB1536-10-500","price":39.99,"currency_code":"USD","in_stock":true},{"title":"9\/16 Inch","offer_id":32095619186772,"sku":"MB1536-10-562","price":39.99,"currency_code":"USD","in_stock":true},{"title":"5\/8 Inch","offer_id":39523822075988,"sku":"MB1536-10-625","price":39.99,"currency_code":"USD","in_stock":true},{"title":"3\/4 Inch","offer_id":32095619219540,"sku":"MB1536-10-750","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb1536-1.jpg?v=1587754480"},{"product_id":"4-link-bracket-with-flat-bottom-3-4-inch","title":"4 Link Flat Bottom Tab","description":"\u003cp\u003eThe Motobilt Flat Bottom 4 Link Tab is CAD designed and CNC laser cut from high strength steel 3\/8\" plate. The tab can be used to mount a number of different suspension link configurations. We commonly use this tab in combination with axle trusses.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e4 link Tab with a flat mounting surface\u003c\/li\u003e\r\n\u003cli\u003e3.75 inch Flat base to weld weld on\u003c\/li\u003e\r\n\u003cli\u003eHole cut 2 inches up from the base\u003c\/li\u003e\r\n\u003cli\u003eThe material thickness of this tab is 3\/8 inch\u003c\/li\u003e\r\n\u003cli\u003eSold as each\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"1\/2 Inch","offer_id":40032051134548,"sku":"MB2005-1\/2","price":4.99,"currency_code":"USD","in_stock":true},{"title":"9\/16 Inch","offer_id":32096041697364,"sku":"MB2005-9\/16","price":4.99,"currency_code":"USD","in_stock":true},{"title":"5\/8 Inch","offer_id":32096041730132,"sku":"MB2005-5\/8","price":4.99,"currency_code":"USD","in_stock":true},{"title":"3\/4 Inch","offer_id":32096041762900,"sku":"MB2005-3\/4","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB2005-view-1.jpg?v=1634333354"},{"product_id":"4-link-axle-tab-steel-2-5-axle-tube","title":"4 Link Axle Tab 2.5\"Axle Tube Diameter","description":"\u003cp\u003eThe Motobilt 4 link axle tabs are laser cut out of 3\/8\" inch thick P and O steel plate. These brackets are built with pure strength in mind! We offer these brackets for just about every axle and link combination out there. In the case of the Motobilt 4 link axle tabs we thought of everything! You get to choose your axle tube diameter and you get to choose your bolt hole size! These link brackets measure 2 inch from center of hole to the axle tube.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e4 Link axle tab\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAxle Tube diameter 2.5 inch\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eCommon axle tube diameters:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDana 30 2.500 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 35 2.500 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 44 1\/2 ton 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 10-bolt 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 12-bolt 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 14-bolt 3.500 inch\u003c\/li\u003e\r\n\u003cli\u003eFord 8.8 3.250 inch\u003c\/li\u003e\r\n\u003cli\u003eFord 9-inch 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 60 rear 3.125 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 44 front 3\/4 ton 2.750 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 60 front 3.125 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 70 rear 3.625 inch\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"1\/2 Inch","offer_id":32096054313044,"sku":"MB2054-250-500","price":4.99,"currency_code":"USD","in_stock":true},{"title":"3\/4 Inch","offer_id":32096054345812,"sku":"MB2054-250-750","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB2054-View-1.jpg?v=1634334707"},{"product_id":"4-link-axle-tab-steel-2-75-axle-tube","title":"4 Link Axle Tab 2.75\" Axle Tube Diameter","description":"\u003cp\u003eThe Motobilt 4 link axle tabs are laser cut 3\/8\" thick steel plate. These brackets are built with pure strength in mind! We offer these brackets for just about every axle and link combination out there. In the case of the Motobilt 4 link axle tabs we thought of everything! You get to choose your axle tube diameter and you get to choose your bolt hole size! These link brackets measure 2 inch from center of hole to the axle tube.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e4 Link axle tab\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAxle Tube diameter 2.75 inch\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eCommon axle tube diameters:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDana 30 2.500 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 35 2.500 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 44 1\/2 ton 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 10-bolt 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 12-bolt 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 14-bolt 3.500 inch\u003c\/li\u003e\r\n\u003cli\u003eFord 8.8 3.250 inch\u003c\/li\u003e\r\n\u003cli\u003eFord 9-inch 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 60 rear 3.125 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 44 front 3\/4 ton 2.750 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 60 front 3.125 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 70 rear 3.625 inch\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"1\/2 Inch","offer_id":32098610643028,"sku":"MB2054-275-500","price":4.99,"currency_code":"USD","in_stock":true},{"title":"3\/4 Inch","offer_id":32098610675796,"sku":"MB2054-275-750","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB2054-View-1_90b49c3e-a547-4ce7-9ca7-0fc573455c57.jpg?v=1634334734"},{"product_id":"4-link-axle-tab-steel-3-axle-tube","title":"4 Link Axle Tab 3\" Axle Tube Diameter","description":"\u003cp\u003eThe Motobilt 4 link axle tabs are laser cut out of 3\/8\" thick steel plate. These brackets are built with pure strength in mind! We offer these brackets for just about every axle and link combination out there. In the case of the Motobilt 4 link axle tabs we thought of everything! You get to choose your axle tube diameter and you get to choose your bolt hole size! These link brackets measure 2 inch from center of hole to the axle tube.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e4 Link axle tab\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAxle Tube diameter 3 inch\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eCommon axle tube diameters:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDana 30 2.500 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 35 2.500 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 44 1\/2 ton 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 10-bolt 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 12-bolt 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 14-bolt 3.500 inch\u003c\/li\u003e\r\n\u003cli\u003eFord 8.8 3.250 inch\u003c\/li\u003e\r\n\u003cli\u003eFord 9-inch 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 60 rear 3.125 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 44 front 3\/4 ton 2.750 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 60 front 3.125 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 70 rear 3.625 inch\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"1\/2 Inch","offer_id":32098620833876,"sku":"MB2054-300-500","price":4.99,"currency_code":"USD","in_stock":true},{"title":"5\/8 Inch","offer_id":32098620866644,"sku":"MB2054-300-625","price":4.99,"currency_code":"USD","in_stock":true},{"title":"3\/4 Inch","offer_id":32098620899412,"sku":"MB2054-300-750","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB2054-View-1_165031a6-eb9c-4a05-8220-69398e8c2c6d.jpg?v=1634334751"},{"product_id":"4-link-axle-tab-steel-3-25-axle-tube","title":"4 Link Axle Tab 3.25\" Axle Tube Diameter","description":"\u003cp\u003eThe Motobilt 4 link axle tabs are laser cut out of 3\/8\" thick steel plate. These brackets are built with pure strength in mind! We offer these brackets for just about every axle and link combination out there. In the case of the Motobilt 4 link axle tabs we thought of everything! You get to choose your axle tube diameter and you get to choose your bolt hole size! These link brackets measure 2 inch from center of hole to the axle tube.\u003cbr\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e4 Link axle tab\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAxle Tube diameter 3.25 inch\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eCommon axle tube diameters:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDana 30 2.500 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 35 2.500 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 44 1\/2 ton 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 10-bolt 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 12-bolt 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 14-bolt 3.500 inch\u003c\/li\u003e\r\n\u003cli\u003eFord 8.8 3.250 inch\u003c\/li\u003e\r\n\u003cli\u003eFord 9-inch 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 60 rear 3.125 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 44 front 3\/4 ton 2.750 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 60 front 3.125 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 70 rear 3.625 inch\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"1\/2 Inch","offer_id":32098623651924,"sku":"MB2054-325-500","price":4.99,"currency_code":"USD","in_stock":true},{"title":"5\/8 Inch","offer_id":32098623684692,"sku":"MB2054-325-625","price":4.99,"currency_code":"USD","in_stock":true},{"title":"3\/4 Inch","offer_id":32098623717460,"sku":"MB2054-325-750","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB2054-View-1_47017c84-daab-45c1-9d9a-744928a76066.jpg?v=1634334770"},{"product_id":"4-link-axle-tab-steel-3-5-axle-tube","title":"4 Link Axle tab 3.5\" Axle Tube Diameter","description":"\u003cp\u003eThe Motobilt 4 link axle tabs are laser cut out of 3\/8\" steel plate. These brackets are built with pure strength in mind! We offer these brackets for just about every axle and link combination out there. In the case of the Motobilt 4 link axle tabs we thought of everything! You get to choose your axle tube diameter and you get to choose your bolt hole size! These link brackets measure 2 inch from center of hole to the axle tube.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e4 Link axle tab\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAxle Tube diameter 3.5 inch\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eCommon axle tube diameters:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDana 30 2.500 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 35 2.500 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 44 1\/2 ton 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 10-bolt 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 12-bolt 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eGM 14-bolt 3.500 inch\u003c\/li\u003e\r\n\u003cli\u003eFord 8.8 3.250 inch\u003c\/li\u003e\r\n\u003cli\u003eFord 9-inch 3.000 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 60 rear 3.125 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 44 front 3\/4 ton 2.750 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 60 front 3.125 inch\u003c\/li\u003e\r\n\u003cli\u003eDana 70 rear 3.625 inch\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"1\/2 Inch","offer_id":32098636759124,"sku":"MB2054-350-500","price":4.99,"currency_code":"USD","in_stock":true},{"title":"5\/8 inch","offer_id":42249146564692,"sku":"MB2054-350-625","price":4.99,"currency_code":"USD","in_stock":true},{"title":"3\/4 Inch","offer_id":32098636824660,"sku":"MB2054-350-750","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB2054-View-1_39b68d24-9b4e-4b26-ba37-f896ba41f4fa.jpg?v=1634334806"},{"product_id":"triangulated-lower-link-mount-large-for-1-75-inch-od-round-tube","title":"Bat Wing Lower Triangulated 4 Link Mount LARGE","description":"\u003cp\u003eBuilding triangulated 4 link suspensions does not have to be difficult. Motobilt offers products to make fabricating 4 link suspensions easier for both the professional and DIY fabricator. The Large Link Mount System featured is designed to work with 1.25 x .1 rod ends with 1 inch x 3\/4 inch high misalignment spacers. The mounting width of the pocket where the rod end slides into is 2.625 inch. The link mount is fabricated from 5\/16 inch steel plate. The link mount is designed to work on 1.75 inch OD round tube.\u003c\/p\u003e\r\n\u003cp\u003eThe overall width of the link mount system is 18 inches to spread the load over a wider area. When installing we recommend using a min of .188 inch wall DOM tubing or thicker. You should also add tube gussets to further brace the mounting area. The overall height of the bracket once assembled is 3.88 inch tall (3.875 inch). The link mount is designed to angle the links out at 20 degrees per side totaling 40 degrees. With high misalignment spacers you can vary the actual mounting angle to the axle slightly.\u003c\/p\u003e\r\n\u003cp\u003eThis style link mount requires welding to install. Be sure to have a qualified person weld the parts in and design your suspension. The part is intended for off-road use on vehicles such as Jeep, rock crawlers, rock bouncers, mega trucks, and other vehicles requiring a triangulated 4 link suspension.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1520_-_Shipping.pdf?v=1697491677\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eLarge Batwing style link mount\u003c\/li\u003e\r\n\u003cli\u003eWorks with 1.25 x .1 rod ends with 1 inch x 3\/4 inch high misalignment spacers\u003c\/li\u003e\r\n\u003cli\u003eMounting width of the pocket where the rod end slides into is 2.625 inch\u003c\/li\u003e\r\n\u003cli\u003eDesigned to work on 1.75 inch OD round tube\u003c\/li\u003e\r\n\u003cli\u003eOverall width of the link mount system is 18 inches\u003c\/li\u003e\r\n\u003cli\u003eLink mount is fabricated from 3\/8 inch steel plate\u003c\/li\u003e\r\n\u003cli\u003eLink mount is designed to angle the links out at 20 degrees per side totaling 40 degrees\u003c\/li\u003e\r\n\u003cli\u003eSold as each\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight = 15lbs\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThe part is intended for off-road use on vehicles such as Jeep, rock crawlers, rock bouncers, mega trucks, and other vehicles requiring a triangulated 4 link suspension\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32100312776788,"sku":"MB1520","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB1520-View-4.jpg?v=1587754412"},{"product_id":"adjustable-upper-frame-link-mount-single","title":"Adjustable Upper 3 or 4 Link Mount Bracket","description":"\u003cp\u003eAdjustable link mounts\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAdjustable link mounts are designed for the upper portion of your frame\u003c\/li\u003e\r\n\u003cli\u003eThey are laser cut and cnc formed from 1\/4 inch steel plate here in house at Motobilt\u003c\/li\u003e\r\n\u003cli\u003eThere are 3 holes each measuring 5\/8 inch in diamter\u003c\/li\u003e\r\n\u003cli\u003eThe brackets are built with a 22.5 degree misalignment which is perfect for most triangulated upper links\u003c\/li\u003e\r\n\u003cli\u003eSold as each for those who want to use one for an upper front 3 link mount.  If you are building a 4 link suspension you will need to change the quantity to (2).\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThe interior portion can be adjusted for different mounting width before final welding\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eWeight = 6lbs\u003c\/strong\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32100313694292,"sku":"MB1545","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb1545-view-1.jpg?v=1611354605"},{"product_id":"adjustable-link-mounts-for-1-75-inch-dom-tube-with-5-8-inch-bolt-hole","title":"Adjustable Link Mounts for 1-3\/4\" Tube","description":"\u003cp\u003eThe Motobilt adjustable link mounts were designed to fit onto 1.75 inch DOM tube. They allow 3 points of adjustment so you can dial in the optimal settings on your suspension. They are laser cut from \u003cspan data-mce-fragment=\"1\"\u003e1\/4\u003c\/span\u003e inch thick steel plate for exact tolerances. These link brackets come in either 5\/8 inch or 3\/4 inch bolt holes.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAdjustable Link mount for 1.75 inch tube with 5\/8 inch bolt holes\u003c\/li\u003e\r\n\u003cli\u003eLaser cut from 1\/4 inch thick steel plate\u003c\/li\u003e\r\n\u003cli\u003eSold as a pair\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight = 1lb\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eOther parts such as the rod end, and tubing are Not included but they are available\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"5\/8 Inch","offer_id":32100319658068,"sku":"MB2110-175-625","price":10.0,"currency_code":"USD","in_stock":true},{"title":"3\/4 Inch","offer_id":32100319690836,"sku":"MB2110-175-75","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb2110-175-750-4_0.jpg?v=1587754400"},{"product_id":"ford-super-duty-dana-60-lower-link-mounts-9-16-inch-bolt-hole","title":"Super Duty Dana 60 Lower Link Mount Kit","description":"\u003cp\u003eThe Motobilt Ford Super Duty Dana 60 lower control arm mounts are just the ticket for that custom suspension setup. This heavy duty 1\/4 inch steel brackets are laser cut and cnc formed at the Motobilt headquarters. The will allow you to mount a rod end, flex joint, or other end that has a mounting width of approximately 2.625 inch wide. They are available in either a 9\/16 inch bolt hole or a 3\/4 inch bolt hole. What makes these brackets unique is there mounting width at the axle tube has been necked down to fit on the small amount of axle tube available. You will still need to cut away much of the brackets and cast housing to make room for the mounts but this is a pretty common procedure when attempting to use the newer 2005 and newer Ford super duty axles. These brackets are sold as a pair and will need to be welded.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eFord Super Duty Dana 60 lower control arm mounts\u003c\/li\u003e\r\n\u003cli\u003eLaser cut 1\/4 inch steel brackets\u003c\/li\u003e\r\n\u003cli\u003eMounting width of approximately 2.625 inch wide\u003c\/li\u003e\r\n\u003cli\u003eSold as pair\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAvailable in a 5\/8 (.563\"), 9\/16 (.625\"), or 3\/4 (.750\") inch bolt hole\u003c\/li\u003e\r\n\u003cli\u003eYou will still need to cut away much of the brackets and cast housing to make room for the mounts\u003c\/li\u003e\r\n\u003cli\u003eRequires welding\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"9\/16 Inch (.563)","offer_id":32100323622996,"sku":"MB4015-563","price":49.99,"currency_code":"USD","in_stock":true},{"title":"3\/4 inch (.750)","offer_id":32100323655764,"sku":"MB4015-750","price":49.99,"currency_code":"USD","in_stock":true},{"title":"5\/8 inch (.625)","offer_id":42249113239636,"sku":"MB4015-625","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb4015-1.jpg?v=1587754975"},{"product_id":"gm-14-bolt-lower-link-kit-or-4-link-system","title":"14 Bolt Lower Link Tab Kit for MB1503 or Universal","description":"\u003cp\u003eThe Motobilt lower axle link brackets are laser cut from 3\/8\" steel plate. The mounts are designed to fit the GM 14 bolt axle housing tubes. They are offset to allow the rod end and to achieve maximum articulation. They include a 3\/4 inch bolt hole. They can be used for other applications but were designed to be used with the Motobilt Jeep YJ and TJ 4 link bracket system on the lower front links. These are sold in a complete set of 2 Pairs or enough to do one axle.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eGM 14 bolt lower link kit\u003c\/li\u003e\r\n\u003cli\u003eJeep YJ and TJ\u003c\/li\u003e\r\n\u003cli\u003eCNC laser cut 3\/8\" steel plate \u003c\/li\u003e\r\n\u003cli\u003e3\/4 inch bolt hole\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight = 5lbs\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32100334567508,"sku":"MB4014","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB4014-view-1.jpg?v=1587754352"},{"product_id":"dana-60-lower-link-mount-kit-for-4-link-system","title":"Dana 60 Angled Lower Link Mount Kit","description":"\u003cp\u003eThe Motobilt Dana 60 lower link mounts are cnc laser cut 3\/8\" thick steel plate. The mounts are designed to fit the Dana 60 axle housing tubes which are 3 to 3.25”s in diameter. They are offset to allow the rod end and to achieve maximum articulation. They are made with a 3\/4 inch bolt hole.\u003c\/p\u003e\r\n\u003cp\u003eThey can be used in other applications but were designed to be used with the Motobilt Jeep YJ and TJ 4 link bracket system on the lower front links. These are sold in a complete set of 2 Pairs or enough to do one axle.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDana 60 lower link mounts\u003c\/li\u003e\r\n\u003cli\u003e3\/8\" laser cut steel plate\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e3\/4 inch bolt hole\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCan be used in other applications but were designed to be used with the Motobilt Jeep YJ and TJ 4 link bracket system on the lower front links MB1503\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":32100343414868,"sku":"MB4006","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB4006-view-1.jpg?v=1587754461"},{"product_id":"adjustable-link-tower","title":"Upper Link Bracket - Axle Side","description":"\u003cp\u003eThe Motobilt Axle Side Upper link Bracket is an adjustable tower design created to work with many applications. The tower comes in 3 inch axle tube diameter configuration. There are 3 link mounting holes that are each 5\/8 inch in diameter and are separated in 1 inch increments. These towers can be used in a variety of different scenarios but are especially well suited when installing a 3 link suspension. The towers mounting width for the rod ends is 1.75 inch. This is the same size we use with the Jeep YJ, TJ, LJ 4 link kits that can be converted to a 3 Link in front. These are laser cut in house at Motobilt from 1\/4 inch thick steel plate. CNC formed so they tab and slot design will allign itself perfectly.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAdjustable link tower\u003c\/li\u003e\r\n\u003cli\u003e3”, 3.25” and 3.5” axle tube diameters available \u003c\/li\u003e\r\n\u003cli\u003eMounting width for the rod ends is 1.75 inch\u003c\/li\u003e\r\n\u003cli\u003eLaser cut 1\/4 inch thick steel plate\u003c\/li\u003e\r\n\u003cli\u003e3 link mounting holes that are each 5\/8 inch in diameter and are separated in 1 inch increments. \u003c\/li\u003e\r\n\u003cli\u003eSold as each\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight = 8lbs\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThese will need to be welded together\u003c\/li\u003e\r\n\u003cli\u003eWorks with many applications\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"3 Inch","offer_id":32100364419156,"sku":"MB1539-175-300","price":39.99,"currency_code":"USD","in_stock":true},{"title":"3.25 Inch","offer_id":32100364451924,"sku":"MB1539-175-325","price":39.99,"currency_code":"USD","in_stock":true},{"title":"3.5 Inch","offer_id":32100364484692,"sku":"MB1539-175-350","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb1539-4.jpg?v=1587754401"},{"product_id":"4-link-suspension-bracket-kit-for-2007-2011-jku","title":"4 link Suspension Bracket and Skid Kit - for 2007-2011 Jeep JKU","description":"\u003cp\u003eTake your JKU off-road game to the next level with our Updated (January 2025) Gen-2 4-link Suspension kit! Specifically tailored for 2007-2011 4-door Jeep Wrangler JKU models, this comprehensive kit is designed to dramatically enhance your vehicle's suspension capabilities and accommodate 1-ton axles. \u003c\/p\u003e\r\n\u003cp\u003eWe have removed the guesswork and created a suspension kit that will perform beautifully on and off the trail. Our Updated (January 2025) Gen-2 kit includes a redesigned heavy-duty removable transmission cross member, a 3\/16\" thick belly skid plate, and a new rear frame cross member that doubles as a skid mounting system and a crucial structural member for the rear 4 link bracketry.\u003cbr\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eRobust Construction \u0026amp; Seamless Integration: \u003c\/strong\u003eThe Gen-2 kit includes a redesigned heavy-duty removable transmission cross member, a 3\/16\" thick skid plate, and a redesigned rear frame cross member that doubles as a skid mounting system and a crucial structural member for your rear 4 link bracketry.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eVersatile Suspension Setup: \u003c\/strong\u003eDepending on your steering configuration—whether full hydraulic or steering box—you can opt for a complete 4 link or a modified 3 link front setup with a track bar. This flexibility allows for exceptional suspension travel, easy clearance for engine oil pans, aftermarket engines, transfer cases, and driveshafts. The rear is a true double triangulated 4 link that eliminates the need for a rear track bar.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eDesigned for Convenience and Durability: \u003c\/strong\u003eWe’ve incorporated numerous features to make installation quick and servicing your Jeep easy. The kit includes a removable one-piece heavy-duty steel skid plate designed for a snug fit around the front and rear cross members, with countersunk fasteners to create a smooth bottom that avoids hang-ups on obstacles. Additionally, weep holes ensure proper drainage, and a removable panel that provides easy access to the front drive shaft at the transfer case.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003ePrecision and Compatibility: \u003c\/strong\u003eAll link mounting points feature 5\/8” holes through 1\/4” thick steel plates, which can be drilled out for larger diameters if necessary. The inside mounting distance measures 2-5\/8\" to a variety of high-quality joints with high misalignment spacers.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eTailored Fit and Exhaust Considerations: \u003c\/strong\u003eBoth front and rear upper link mounts are precisely tailored to match the factory frame profile, enhancing the strength of the connection. Note that modifications to the factory exhaust will be required to accommodate the new suspension layout.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eMaintained Ground Clearance: \u003c\/strong\u003eThe entire suspension setup preserves the factory skid height, ensuring there is no loss of ground clearance, crucial for tackling challenging terrains.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4 dir=\"ltr\"\u003e\u003cspan\u003eImportant Information: \u003c\/span\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eGas Tank Replacement Required:\u003c\/strong\u003e The factory tank will no longer fit with this system. Replace the factory tank with \u003cstrong\u003eMB5032-MB5034 - \u003c\/strong\u003e\u003ca href=\"https:\/\/motobilt.com\/products\/rear-fuel-tank-w-skid-plate-for-factory-frame-for-jeep-jku?_pos=1\u0026amp;_sid=9e1597b27\u0026amp;_ss=r\"\u003e\u003cstrong\u003eRear Fuel Tank w\/Skid Plate for Jeep JK \/ JKU Factory Frame\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eExhaust Clearance:\u003c\/strong\u003e Custom exhaust routing will be required.\u003cbr\u003e\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eWheelbase Adjustability: \u003c\/strong\u003eWheelbase can be stretched by building longer suspension links.\u003cbr\u003e\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eSteering Requirements:\u003c\/strong\u003eFull hydraulic steering is needed for front 4-link setups. If you run a steering box, this kit operates as a 3 link. Remove one upper link and install a track bar.\u003cbr\u003e\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Body removal is not required for installation.\u003cbr\u003e\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eDrivetrain Compatibility:\u003c\/strong\u003e This will work with your factory drivetrain but can also adapt to V-8 conversions.\u003cbr\u003e\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eSuspension Joint Fitment:\u003c\/strong\u003e Designed for up to 2-⅝” joints with ⅝” bolt holes, this kit fits a variety of high quality joint options from heims to rebuildable cartridge style joints.\u003cbr\u003e\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eKit Fitment:\u003c\/strong\u003e Designed for the 2007-2011 Jeep Wrangler 4-door. Does not fit the 2-door JK\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4 dir=\"ltr\"\u003e\u003cspan\u003eProduct Specifications:\u003c\/span\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\r\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e:\u003c\/span\u003e\u003cspan\u003e High-grade 1\/4\" HRPO steel brackets and 3\/16” skid.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\r\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003cspan\u003e 9.4\" x 40.5\" x 20\"\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\r\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e\u003cspan\u003e 240 lbs (approx.)\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\r\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\u003cspan\u003e Designed for 2007-2011 Jeep Wrangler JKU 4-door models\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e Notes:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eModifications to the factory exhaust will be required to accommodate the new suspension layout.\u003c\/li\u003e\r\n\u003cli\u003eReplace the factory tank with \u003cstrong\u003eMB5032-MB5034 - \u003c\/strong\u003e\u003ca href=\"https:\/\/motobilt.com\/products\/rear-fuel-tank-w-skid-plate-for-factory-frame-for-jeep-jku?_pos=1\u0026amp;_sid=9e1597b27\u0026amp;_ss=r\"\u003e\u003cstrong\u003eRear Fuel Tank w\/Skid Plate for Jeep JK \/ JKU Factory Frame\u003c\/strong\u003e\u003c\/a\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4 dir=\"ltr\"\u003e\u003cspan\u003eRelated Parts:\u003c\/span\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\r\n\u003cp\u003e\u003cstrong\u003eMB1267 - Engine Skid for Jeep JK\/JKU 4 Link Suspension\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMB5032-MB5034 - \u003c\/strong\u003e\u003ca href=\"https:\/\/motobilt.com\/products\/rear-fuel-tank-w-skid-plate-for-factory-frame-for-jeep-jku?_pos=1\u0026amp;_sid=9e1597b27\u0026amp;_ss=r\"\u003e\u003cstrong\u003eRear Fuel Tank w\/Skid Plate for Jeep JK \/ JKU Factory Frame\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":39369616949332,"sku":"MB7000","price":2999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB7000-ES-CoB.jpg?v=1767902670"},{"product_id":"4-link-suspension-bracket-kit-for-2012-2018-jku","title":"4 link Suspension Bracket and Skid Kit for 2012-2018 Jeep JKU","description":"\u003cp dir=\"ltr\"\u003eTake your JKU off-road game to the next level with our Updated (January 2025) Gen-2 4-link Suspension kit! Specifically tailored for 2012-2018 4-door Jeep Wrangler JKU models, this comprehensive kit is designed to dramatically enhance your vehicle's suspension capabilities and accommodate 1-ton axles.\u003c\/p\u003e\r\n\u003cp\u003eWe have removed the guesswork and created a suspension kit that will perform beautifully on and off the trail. Our Updated (January 2025) Gen-2 kit includes a redesigned heavy-duty removable transmission cross member, a 3\/16\" thick belly skid plate, and a new rear frame cross member that doubles as a skid mounting system and a crucial structural member for the rear 4 link bracketry.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003ePrecision and Compatibility: \u003c\/strong\u003eAll link mounting points feature 5\/8” holes through 1\/4” thick steel plates, which can be drilled out for larger diameters if necessary. The inside mounting distance measures 2-5\/8\" to a variety of high-quality joints with high misalignment spacers.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eRobust Construction \u0026amp; Seamless Integration: \u003c\/strong\u003eThe Gen-2 kit includes a redesigned heavy-duty removable transmission cross member, a 3\/16\" thick skid plate, and a redesigned rear frame cross member that doubles as a skid mounting system and a crucial structural member for your rear 4 link bracketry.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eVersatile Suspension Setup: \u003c\/strong\u003eDepending on your steering configuration—whether full hydraulic or steering box—you can opt for a complete 4 link or a modified 3 link front setup with a track bar. This flexibility allows for exceptional suspension travel, easy clearance for engine oil pans, aftermarket engines, transfer cases, and driveshafts. The rear is a true double triangulated 4 link that eliminates the need for a rear track bar.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eDesigned for Convenience and Durability: \u003c\/strong\u003eWe’ve incorporated numerous features to make installation quick and servicing your Jeep easy. The kit includes a removable one-piece heavy-duty steel skid plate designed for a snug fit around the front and rear cross members, with countersunk fasteners to create a smooth bottom that avoids hang-ups on obstacles. Additionally, weep holes ensure proper drainage, and a removable panel that provides easy access to the front drive shaft at the transfer case.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eTailored Fit and Exhaust Considerations: \u003c\/strong\u003eBoth front and rear upper link mounts are precisely tailored to match the factory frame profile, enhancing the strength of the connection. Note that modifications to the factory exhaust will be required to accommodate the new suspension layout.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eMaintained Ground Clearance: \u003c\/strong\u003eThe entire suspension setup preserves the factory skid height, ensuring there is no loss of ground clearance, crucial for tackling challenging terrains.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4 dir=\"ltr\"\u003e\u003cspan\u003eImportant Information: \u003c\/span\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eGas Tank Replacement Required:\u003c\/strong\u003e The factory tank will no longer fit with this system. Replace the factory tank with \u003cstrong\u003eMB5032-MB5034 - \u003c\/strong\u003e\u003ca href=\"https:\/\/motobilt.com\/products\/rear-fuel-tank-w-skid-plate-for-factory-frame-for-jeep-jku?_pos=1\u0026amp;_sid=9e1597b27\u0026amp;_ss=r\"\u003e\u003cstrong\u003eRear Fuel Tank w\/Skid Plate for Jeep JK \/ JKU Factory Frame\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eExhaust Clearance:\u003c\/strong\u003e Custom exhaust routing will be required.\u003cbr\u003e\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eWheelbase Adjustability: \u003c\/strong\u003eWheelbase can be stretched by building longer suspension links.\u003cbr\u003e\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eSteering Requirements:\u003c\/strong\u003eFull hydraulic steering is needed for front 4-link setups. If you run a steering box, this kit operates as a 3 link. Remove one upper link and install a track bar.\u003cbr\u003e\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Body removal is not required for installation.\u003cbr\u003e\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eDrivetrain Compatibility:\u003c\/strong\u003e This will work with your factory drivetrain but can also adapt to V-8 conversions.\u003cbr\u003e\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eSuspension Joint Fitment:\u003c\/strong\u003e Designed for up to 2-⅝” joints with ⅝” bolt holes, this kit fits a variety of high quality joint options from heims to rebuildable cartridge style joints.\u003cbr\u003e\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eKit Fitment:\u003c\/strong\u003e Designed for the 2012-2018 Jeep Wrangler 4-door. Does not fit the 2-door JK\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eProduct Specifications:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\r\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e High-grade 1\/4\" HRPO steel brackets and 3\/16” skid.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\r\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003cspan\u003e 9.4\" x 40.5\" x 20\"\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\r\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e\u003cspan\u003e 240 lbs (approx.)\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\r\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\u003cspan\u003e Designed for 2012-2018 Jeep Wrangler JKU 4-door models\u003c\/span\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003e \u003cmeta charset=\"UTF-8\"\u003eNotes\u003c\/strong\u003e\u003csvg width=\"14\" height=\"8\" viewbox=\"0 0 14 8\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M13 6.81818L7 0.818176L1 6.81818\" stroke=\"var(--color-heading)\" stroke-width=\"1.3\" stroke-linecap=\"round\" stroke-linejoin=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cdiv class=\"collapsible__content accordion__content rte\" id=\"Accordion-collapsible_tab_LRTkCC-template--16379101216852__new_description_section_Lg8UiC\"\u003e\r\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eModifications to the factory exhaust will be required to accommodate the new suspension layout.\u003c\/li\u003e\r\n\u003cli\u003eReplace the factory tank with \u003cstrong\u003eMB5032-MB5034 - \u003c\/strong\u003e\u003ca href=\"https:\/\/motobilt.com\/products\/rear-fuel-tank-w-skid-plate-for-factory-frame-for-jeep-jku?_pos=1\u0026amp;_sid=9e1597b27\u0026amp;_ss=r\"\u003e\u003cstrong\u003eRear Fuel Tank w\/Skid Plate for Jeep JK \/ JKU Factory Frame\u003c\/strong\u003e\u003c\/a\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003ch4 dir=\"ltr\"\u003e\u003cspan\u003eRelated Parts:\u003c\/span\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\r\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMB1267 - Engine Skid for Jeep JK\/JKU 4 Link Suspension\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\r\n\u003cb id=\"docs-internal-guid-deca744a-7fff-83d3-6fa1-57d7008ebd4d\" style=\"font-size: 0.875rem;\"\u003eMB5032-MB5034 - \u003ca href=\"https:\/\/motobilt.com\/products\/rear-fuel-tank-w-skid-plate-for-factory-frame-for-jeep-jku?_pos=1\u0026amp;_sid=9e1597b27\u0026amp;_ss=r\"\u003eRear Fuel Tank w\/Skid Plate for Jeep JK \/ JKU Factory Frame\u003c\/a\u003e\u003c\/b\u003e\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":39369618948180,"sku":"MB7001","price":2999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB7001-ES-CoB.jpg?v=1767902782"},{"product_id":"jeep-jku-4-link-suspension-brackets","title":"4 link Front Suspension Brackets w\/Transmission Crossmember for 2007-2011 Jeep JK\/JKU","description":"\u003cp\u003eTake your Jeep's suspension to the next level with our updated (January 2025) Gen-2 JKU 4-Link Front Suspension Brackets and Transmission Crossmember, perfectly suited for Jeep JK and JKU models from 2007-2011. This kit is designed for those looking to upgrade to 1-ton axles and is compatible with both 2-door and 4-door vehicles.\u003c\/p\u003e\r\n\u003cp\u003eImprove your Jeep's off-road capabilities and get smoother, more robust performance across any terrain. Whether upgrading for better handling or preparing for challenging off-road conditions, this suspension upgrade is essential for your Jeep’s modifications.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eHeavy-Duty Transmission Crossmember:\u003c\/strong\u003e Replaces your factory crossmember for enhanced durability and superior performance. Built in provisions to mount a custom engine skid plate or use the Motobilt MB7000 for a full JKU suspension kit.\u003cbr\u003e\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eFront Suspension Link Mount Brackets:\u003c\/strong\u003e Includes robust front lower brackets designed to accept 2-5\/8” wide joints, with 5\/8” diameter holes. The front upper brackets have been updated to the 2-5\/8” wide joints with the same 5\/8” diameter holes.\u003cbr\u003e \u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eEfficient Installation:\u003c\/strong\u003e All front brackets align with factory frame hole locations, ensuring a straightforward installation process with easier welding access.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003e3 Link: \u003c\/strong\u003eThis can be used as a 3 link with track bar and a traditional steering box\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003e4 link: \u003c\/strong\u003eEliminate the need for a track bar and install as a 4 link and you must run full hydraulic steering. (NOT Assist)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eImportant Information\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eExpand Your Setup:\u003c\/strong\u003e For a more comprehensive upgrade, explore our full kit that includes these front brackets and transmission crossmember, alongside a heavy-duty 3\/16\" steel skid plate, rear crossmember, and rear link brackets for complete underbody and suspension enhancement. Full JKU kits also available: MB7000 - 2007-2011 Jeep JKU 4 link Suspension Bracket \u0026amp; Skid Kit - Gen 2\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eSteering Requirements:\u003c\/strong\u003eFull hydraulic steering is needed for front 4-link setups. If you run a steering box, this kit operates as a 3 link. Remove one upper link and install a track bar.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eSuspension Joint Fitment:\u003c\/strong\u003eDesigned for up to 2-⅝” joints with ⅝” bolt holes, this kit fits a variety of high quality joint options from heims to rebuildable cartridge style joints.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-grade 1\/4\" HRPO steel\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 50 lbs (approx.)\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed for 2007-2011 Jeep Wrangler JK and JKU\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eContains:\u003c\/strong\u003e This listing is for the crossmember and brackets only. For the full MB7000 suspension kit see Related Products below.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eWelding Required:\u003c\/strong\u003e All brackets require welding to the factory frame, ensuring a secure and permanent installation. The crossmember is removable.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eExhaust: \u003c\/strong\u003eModifications to the factory exhaust will be required to accommodate the new suspension layout.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eRelated Products\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMB7000 - \u003cspan\u003e2007-2011 Jeep JKU 4 link Suspension Bracket \u0026amp; Skid Kit - Gen 2\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":39378456772692,"sku":"MB7003","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB7003-cob.jpg?v=1735845082"},{"product_id":"jeep-jku-4-link-rear-suspension-brackets-w-rear-crossmember","title":"4 link Rear Suspension Brackets w\/Rear Crossmember for Jeep JKU","description":"\u003cp\u003eElevate the suspension capabilities of your Jeep JK Unlimited with our updated (January 2025) Gen-2 JKU 4-Link Rear Suspension Brackets and Rear Crossmember. This crossmember is ideal for those wishing to eliminate the rear track bar, as it is not required with this double triangulated 4 link. This will work well with upgraded 1-ton axles and enhance the structural integrity and functionality of their vehicle's rear suspension.\u003c\/p\u003e\r\n\u003cp\u003eThis updated (January 2025) Gen-2 kit not only boosts your Jeep's off-road performance but also provides a smoother, more robust drive across any terrain. Whether you're upgrading for enhanced handling or gearing up for tough off-road challenges, this rear suspension upgrade is crucial for your Jeep’s modifications.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eRear Link Brackets:\u003c\/strong\u003e Includes two durable rear upper triangulated link brackets designed to accept 2-5\/8” wide joints, with 5\/8” diameter holes that can be expanded if necessary. Includes 2 mounting holes to adjust your upper link separation.\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eNew Rear Frame Crossmember:\u003c\/strong\u003e Doubles as a skid mounting system and acts as an essential structural member for the rear lower triangulated 4-link bracketry, enhancing vehicle stability and support.\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003ePrecision Fit:\u003c\/strong\u003e The rear brackets are meticulously scribed to fit seamlessly inside the factory frame, ensuring a perfect alignment and robust connection.\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eHigh-Strength Materials:\u003c\/strong\u003e All parts are constructed from raw steel and shipped as fully welded sub-assemblies, ready for installation.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eDouble Triangulated: \u003c\/strong\u003eThis a true double triangulated rear suspension. Eliminates the need for a rear track bar.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eImportant Information:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eExpand Your Setup:\u003c\/strong\u003e Looking for a more comprehensive upgrade? Check out our full kit that includes these rear brackets and rear crossmember, along with front brackets, a transmission crossmember, and a heavy-duty 3\/16\" steel skid plate. Enhance your Jeep’s underbody protection and suspension framework significantly.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eSuspension Joint Fitment: \u003c\/strong\u003eDesigned for up to 2-⅝” joints with ⅝” bolt holes, this kit fits a variety of high quality joint options from heims to rebuildable cartridge style joints.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-grade 1\/4\" HRPO steel\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 70 lbs (approx.)\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed for 2007-2018 Jeep Wrangler JK\/JKU\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eWelding Required:\u003c\/strong\u003e All brackets require welding to the factory frame, ensuring a secure and permanent installation.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eGas Tank Replacement Required:\u003c\/strong\u003e The factory tank will no longer fit with this system. Replace the factory tank with \u003cstrong\u003eMB5032-MB5034 - \u003c\/strong\u003e\u003ca href=\"https:\/\/motobilt.com\/products\/rear-fuel-tank-w-skid-plate-for-factory-frame-for-jeep-jku?_pos=1\u0026amp;_sid=9e1597b27\u0026amp;_ss=r\"\u003e\u003cstrong\u003eRear Fuel Tank w\/Skid Plate for Jeep JK \/ JKU Factory Frame\u003c\/strong\u003e\u003c\/a\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eFits 4 door: \u003c\/strong\u003eThis kit only works for the 4 door JKU and will not fit the 2 door JK.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eExhaust: \u003c\/strong\u003eModifications to the factory exhaust will be required\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eRelated Products:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFull Kit 07-11 JKU\u003c\/strong\u003e - MB7000 - 2007-2011 Jeep JKU 4 link Suspension Bracket \u0026amp; Skid Kit - Gen 2\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFull kit 12-18 JKU\u003c\/strong\u003e - MB7000 - 2007-2011 Jeep JKU 4 link Suspension Bracket \u0026amp; Skid Kit - Gen 2\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFront Crossmember\u003c\/strong\u003e - MB7003 - 2007-2011 4 link Front Suspension Brackets w\/Transmission Crossmember for Jeep JK\/JKU\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFront Crossmember\u003c\/strong\u003e - MB7004 - 2012-2018 4 link Front Suspension Brackets w\/Transmission Crossmember for Jeep JK\/JKU\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFuel Tank: \u003c\/strong\u003eReplace the factory tank with \u003cstrong\u003eMB5032-MB5034 - \u003c\/strong\u003e\u003ca href=\"https:\/\/motobilt.com\/products\/rear-fuel-tank-w-skid-plate-for-factory-frame-for-jeep-jku?_pos=1\u0026amp;_sid=9e1597b27\u0026amp;_ss=r\"\u003e\u003cstrong\u003eRear Fuel Tank w\/Skid Plate for Jeep JK \/ JKU Factory Frame\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":39378180833364,"sku":"MB7005","price":1299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB7005-cob.jpg?v=1735847354"},{"product_id":"20012-2018-jeep-jku-4-link-front-suspension-brackets-w-transmission-crossmember","title":"4 link Front Suspension Brackets w\/Transmission Crossmember for 2012-2018 Jeep JK\/JKU","description":"\u003cp\u003eTake your Jeep's suspension to the next level with our updated (January 2025) Gen-2 JKU 4-Link Front Suspension Brackets and Transmission Crossmember, perfectly suited for Jeep JK and JKU models from 2012-2018. This kit is designed for those looking to upgrade to 1-ton axles and is compatible with both 2-door and 4-door vehicles.\u003c\/p\u003e\r\n\u003cp\u003eImprove your Jeep's off-road capabilities and get smoother, more robust performance across any terrain. Whether upgrading for better handling or preparing for challenging off-road conditions, this suspension upgrade is essential for your Jeep’s modifications.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eHeavy-Duty Transmission Crossmember:\u003c\/strong\u003e Replaces your factory crossmember for enhanced durability and superior performance. Built in provisions to mount a custom engine skid plate or use the Motobilt MB7001 for a full suspension kit.\u003cbr\u003e\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eFront Suspension Link Mount Brackets:\u003c\/strong\u003e Includes robust front lower brackets designed to accept 2-5\/8” wide joints, with 5\/8” diameter holes. The front upper brackets have been updated to the 2-5\/8” wide joints with the same 5\/8” diameter holes.\u003cbr\u003e \u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eEfficient Installation:\u003c\/strong\u003e All front brackets align with factory frame hole locations, ensuring a straightforward installation process with easier welding access.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003e3 Link: \u003c\/strong\u003eThis can be used as a 3 link with track bar and a traditional steering box.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003e4 link: \u003c\/strong\u003eEliminate the need for a track bar and install as a 4 link and you must run full hydraulic steering. (NOT Assist)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eImportant Information:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eExpand Your Setup:\u003c\/strong\u003eFor a more comprehensive upgrade, explore our full kit that includes these front brackets and transmission crossmember, alongside a heavy-duty 3\/16\" steel skid plate, rear crossmember, and rear link brackets for complete underbody and suspension enhancement. Full JKU kits also available: MB7001 - 2012-2018 Jeep JKU 4 link Suspension Bracket \u0026amp; Skid Kit - Gen 2\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eSteering Requirements:\u003c\/strong\u003eFull hydraulic steering is needed for front 4-link setups. If you run a steering box, this kit operates as a 3 link. Remove one upper link and install a track bar.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eSuspension Joint Fitment:\u003c\/strong\u003eDesigned for up to 2-⅝” joints with ⅝” bolt holes, this kit fits a variety of high quality joint options from heims to rebuildable cartridge style joints.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-grade 1\/4\" HRPO steel\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 50 lbs (approx.)\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed for 2012-2018 Jeep Wrangler JK and JKU\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eContains:\u003c\/strong\u003e This listing is for the crossmember and brackets only. For the full MB7000 suspension kit see Related Products below.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eWelding Required:\u003c\/strong\u003e All brackets require welding to the factory frame, ensuring a secure and permanent installation.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eExhaust: \u003c\/strong\u003eModifications to the factory exhaust will be required\u003c\/li\u003e\r\n\u003cli\u003e\u003cbr\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eRelated Products:\u003c\/p\u003e\r\n\u003cp\u003eMB7001 - 2012-2018 Jeep JKU 4 link Suspension Bracket \u0026amp; Skid Kit - Gen 2\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":39378460115028,"sku":"MB7004","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB7004-cob.jpg?v=1735846236"},{"product_id":"front-3-or-4-link-suspension-bracket-kit-for-jeep-jlu","title":"Front 3 or 4 Link Suspension Bracket Kit for Jeep JLU","description":"\u003cp\u003eOur MB7007 Front 3 or 4 Link Suspension Bracket Kit for Jeep JL \u0026amp; JLU takes all of the front geometry guesswork at the frame out of your build.\u003cbr\u003e\u003cbr\u003eOur kit includes all of the front frame mounted bracketry to allow you to build either a triangulated 3 link front suspension with tracbar for mechanical steering or a triangulated 4 link front suspension for full hydro steering.\u003cbr\u003e\u003cbr\u003eAll front brackets are designed to accept 2-5\/8” wide joints. All joint mounting holes measure 5\/8” diameter which you can drill to a larger diameter, if you choose.\u003cbr\u003e\u003cbr\u003eAll joint pivot bolts are 100% recessed \u0026amp; protected, yet still easily accessible with standard tools for maintenance \u0026amp; future repair or service.\u003cbr\u003e\u003cbr\u003eAll front brackets are located using factory frame hole locations for ease of installation.\u003cbr\u003e\u003cbr\u003eAll plates are ¼” thick high grade steel \u0026amp; expertly designed to key together with self-jigging precision tabs \u0026amp; slots\u003cbr\u003e\u003cbr\u003eParts are shipped as fully welded sub-assemblies. Parts are shipped as raw steel. Requires professional welding of kit components to factory frame.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2018-Current Jeep JL \u0026amp; JLU\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e:\u003c\/p\u003e\r\n\u003cp\u003eThe exhaust will have to be modified.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSuggested Parts:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCE-9114NL-28 \u0026amp; CE-9114N-28 Johnny Joints from RockJock 4x4\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB7007_-_Shipping_cc565b7c-920c-484a-97da-4f208e631cf8.pdf?v=1768940256\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB7006_-_Assembly_Instructions_c22cbaee-00a0-4f88-bf6d-b9ad0041e107.pdf?v=1740678678\" class=\"btn\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e\r\n","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":39494230736980,"sku":"MB7007","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB7007_-_Image_07.png?v=1633462071"},{"product_id":"rear-4-link-suspension-bracket-kit-for-jeep-jlu","title":"Rear 4 Link Suspension Bracket Kit for Jeep JLU","description":"\u003cp\u003eOur MB7008 Rear 4 Link Suspension Bracket Kit for Jeep JLU takes all of the rear geometry guesswork at the frame out of your build.\u003cbr\u003e\u003cbr\u003eOur kit includes all of the rear frame mounted bracketry to allow you to build a true double triangulated rear 4 link suspension to connect with your larger axles.\u003cbr\u003e\u003cbr\u003eYour passenger mounted factory fuel tank will be omitted \u0026amp; moved to the rear. We have rear mounted aluminum fuel tanks, steel skids \u0026amp; EVAP modification kits available.\u003cbr\u003e\u003cbr\u003eThe rear frame on a Jeep JLU is narrower than a Jeep JK, thus, a back half frame is not necessary in order fit coil-over shocks or ORI struts. \u003c\/p\u003e\r\n\u003cp\u003e\u003cbr\u003eAll rear brackets are designed to accept 2-5\/8” wide joints. All joint mounting holes measure 5\/8” diameter which you can drill to a larger diameter, if you choose. All joint pivot bolts are 100% recessed \u0026amp; protected, yet still easily accessible with standard tools for maintenance \u0026amp; future repair or service.\u003cbr\u003e\u003cbr\u003eThe rear brackets key into the new rear cross member \u0026amp; are scribed to fit perfectly to the inside of the factory frame. All brackets require welding to the factory frame. All joint plates are ¼” thick high grade steel.\u003cbr\u003e\u003cbr\u003eParts are shipped as fully welded sub-assemblies. Parts are shipped as raw steel.\u003cbr\u003e\u003cbr\u003eRequires professional welding of kit components to factory frame.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e2018-Current Jeep JLU 4 door only, does not fit 2 door.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eSuggested Parts:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCE-9114NL-28 \u0026amp; CE-9114N-28 Johnny Joints from RockJock 4x4\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB7006_-_Assembly_Instructions_c22cbaee-00a0-4f88-bf6d-b9ad0041e107.pdf?v=1740678678\" class=\"btn\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":39494233096276,"sku":"MB7008","price":1299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB7008_-_Image_07.png?v=1633462305"},{"product_id":"4-link-suspension-bracket-skid-kit-for-jeep-jlu","title":"4 Link Suspension Bracket \u0026 Skid Kit for Jeep JLU","description":"\u003cp\u003e\u003cstrong\u003eNOTE: This kit is compatible with the 3.6L JLU engine. 2018-2020\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eReady to transform your Jeep JL Unlimited to a whole different level of suspension capabilities? Wanting to upgrade to 1 ton axles \u0026amp; coil-over shocks or ORI Struts? Want to be able to run up to 42\" tires? We have the ultimate solution to transform your Jeep JLU into an off-roading monster!\u003cbr\u003e\u003cbr\u003eOur MB7006 4 Link Suspension Bracket \u0026amp; Skid System for Jeep JLU takes all of the geometry guesswork out of your build. Our kit includes all of the frame mounted bracketry to allow you to build a true double triangulated rear 4 link suspension and either a triangulated 4 link front \u003cspan data-mce-fragment=\"1\"\u003esuspension \u003c\/span\u003eor 3 link front suspension with tracbar.\u003cbr\u003e\u003cbr\u003eThis will allow you the choice of building a 3 link front suspension with tracbar for mechanical steering or a 4 link front suspension with full hydro steering.\u003cbr\u003e\u003cbr\u003eOur kit includes a new heavy duty removable transmission cross member that replaces your factory cross member \u0026amp; also provides the mounting locations for the front lower link mounts. We include a removable heavy duty ¼” thick high grade steel skid plate that follows the contours of the transmission cross member. Also included is a new rear frame cross member which also acts as a skid mounting system and is an integral structural member to support the rear 4 link bracketry.\u003cbr\u003e\u003cbr\u003eTo protect your vulnerable oil \u0026amp; transmission pans along with the front exhaust \u0026amp; transmission lines, our kit includes a heavy duty engine skid which spans from forward of the factory engine oil pan \u0026amp; is structurally supported in the rear by the new heavy duty removable transmission cross member.\u003cbr\u003e\u003cbr\u003eThis kit will allow you to have clearance for an aftermarket transfer case, like the Atlas II or Atlas IV. Your passenger mounted factory fuel tank will be omitted \u0026amp; moved to the rear. We have rear mounted aluminum fuel tanks, steel skids \u0026amp; EVAP modification kits available.\u003cbr\u003e\u003cbr\u003eThe rear frame on a Jeep JLU is narrower than a Jeep JK, thus, a back half frame is not necessary in order fit coil-over shocks or ORI struts. \u003cspan style=\"display: none;\"\u003eWe separately offer rear shock mounts (MB1562) that work seamlessly with this 4 link bracket kit \u0026amp; provide the clearance \u0026amp; height required to install your rear shocks.\u003c\/span\u003e \u003cbr\u003e\u003cbr\u003eAll front \u0026amp; rear brackets are designed to accept 2-5\/8” wide joints. All joint mounting holes measure 5\/8” diameter which you can drill to a larger diameter, if you choose.\u003cbr\u003e\u003cbr\u003eAll joint pivot bolts are 100% recessed \u0026amp; protected, yet still easily accessible with standard tools for maintenance \u0026amp; future repair or service. We know, it’s a crazy idea, but we actually put a lot of thought into the simple little details, like being able to protect every bolt so future repair of your vehicle is easy, with regular tools!\u003cbr\u003e\u003cbr\u003eAll front brackets are located using factory frame hole locations for ease of installation. The rear brackets key into the new rear cross member \u0026amp; are scribed to fit perfectly to the inside of the factory frame. All brackets require welding to the factory frame.\u003cbr\u003e\u003cbr\u003eAll joint plates are ¼” thick high grade steel. The skid plate is manufactured from ¼” steel with CNC press brake bends for added strength. The skid features six (6) drainage weep holes, as well as, countersunk mounting holes for a completely flush under belly. No hang up points for obstacles!\u003cbr\u003e\u003cbr\u003eAll mounting points for the skid plate have machined threaded holes in their mating structures. No need for fish plates or nuts to remove the skid plate.\u003cbr\u003e\u003cbr\u003eParts are shipped as fully welded sub-assemblies. Parts are shipped as raw steel. Weight = 266 lbs\u003cbr\u003e\u003cbr\u003eRequires professional welding of kit components to factory frame.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e- Removable Belly Skid for full access to transfer case\u003cbr\u003e- Flush mounted large access plate in engine skid\u003cbr\u003e- Countersunk bolt heads in skid plates\u003cbr\u003e- All pivot bolts are protected\u003cbr\u003e- 3 or 4 Link Front Suspension capable\u003cbr\u003e- True double triangulated Rear Suspension ready\u003cbr\u003e\u003cbr\u003eBenefits\u003cbr\u003e- Fast \u0026amp; easy oil changes\u003cbr\u003e- Accessibility for easy maintenance \u0026amp; service\u003cbr\u003e- No bolts heads to get hung up on\u003cbr\u003e- No guesswork in suspension geometry\u003cbr\u003e- Designed for years of heavy duty off-roading\u003cbr\u003e- Protection of vulnerable \u0026amp; expensive components\u003cbr\u003e- Easy to customize\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNotes:\u003c\/p\u003e\n\u003cp\u003eThe factory exhaust will have to be heavily modified, the factory fuel tank removed and relocated to the back of the Jeep.  See the \u003ca href=\"https:\/\/motobilt.com\/products\/rear-fuel-tank-skid-for-jeep-jlu\" target=\"_blank\"\u003eMB5026-5033\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYou do NOT have to remove the body to install.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSuggested Parts:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCE-9114NL-28 \u0026amp; CE-9114N-28 Johnny Joints from RockJock 4x4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e2018-Current Jeep JLU 4 door with 3.6L\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB7006_-_Shipping_9de602d7-1576-4cba-bc62-48d20487a008.pdf?v=1740678677\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB7006_-_Assembly_Instructions_c22cbaee-00a0-4f88-bf6d-b9ad0041e107.pdf?v=1740678678\" class=\"btn\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":39494241419348,"sku":"MB7006","price":2999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB7006-Cut-Out.jpg?v=1718898917"},{"product_id":"skid-plate-for-jeep-yj","title":"Replacement Skid Plate for Jeep YJ 4 Link Suspension System","description":"\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eThis is a REPLACEMENT skid plate for our 4 Link Suspension Mount Skid System for Jeep YJ (\u003cspan style=\"color: #ff2a00;\"\u003e\u003ca href=\"https:\/\/motobilt.com\/products\/jeep-yj-4-link-suspension-mount-kit-skid\" style=\"color: #ff2a00;\" target=\"_blank\"\u003eMB1503\u003c\/a\u003e\u003c\/span\u003e). This skid plate will ONLY work with the Motobilt kit. \u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eMotobilt products are made to last. But when you're out there on the trail, the elements can be brutal. If you've damaged your skid plate from our kit, you can order this replacement and get your rig back out there where you want to be. \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Motobilt YJ replacement skid plate is fabricated from 1\/4\" high strength CNC laser cut steel plate. \u003c\/span\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":39544147476564,"sku":"MB1503-15","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb1503-skid-1_f730431c-3b81-43c3-b9c6-ff260d27b4f1.jpg?v=1638995275"},{"product_id":"skid-plate-for-jeep-tj","title":"Replacement Skid Plate for Jeep TJ\/LJ 4 Link Suspension System","description":"\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eThis is a REPLACEMENT skid plate for our 4 Link Suspension Mount Skid System for Jeep TJ\/LJ (\u003cspan style=\"color: #ff2a00;\"\u003e\u003ca style=\"color: #ff2a00;\" href=\"https:\/\/motobilt.com\/products\/jeep-tj-lj-4-link-suspension-mount-skid-system\" target=\"_blank\"\u003eMB1517\u003c\/a\u003e\u003c\/span\u003e). This skid plate will ONLY work with the Motobilt kit. \u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eMotobilt products are made to last. But when you're out there on the trail, the elements can be brutal. If you've damaged your skid plate from our kit, you can order this replacement and get your rig back out there where you want to be. \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Motobilt TJ\/LJ replacement skid plate is fabricated from 1\/4\" high strength CNC laser cut steel plate. \u003c\/span\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":39544149049428,"sku":"MB1517-15","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB1517-skid-2_739e5237-e7c2-418a-9e22-bad64a3e6ba8.jpg?v=1638995482"},{"product_id":"rear-axle-truss-fusion4x4-14b-4-dia-tubes","title":"14 Bolt Rear Axle Truss for 4\" Dia Tubes","description":"\u003cp\u003eBuilding a rear 4 link suspension on a custom 14 Bolt axle assembly with 4 inch axle tubes does not have to be difficult. The Motobilt truss offers a heavy-duty solution for this application.\u003c\/p\u003e\r\n\u003cp\u003eThe truss main body is laser cut and formed from 1\/2” thick steel plate. The pinion guard is made from laser cut and formed 3\/8” steel plate. The plate gussets for the truss are 3\/16” steel plate. This kit is shipped unwelded. The installer will need to assemble and weld into place on the axle assembly. Holes for vent tubes will need to be drilled in the location you want. Some trimming of the gusset plates may be needed if installing an ARB Airlocker. 14 Bolt center sections with the ribs will need to be slightly clearanced with a grinder on the top to allow the truss to sit all the way down on the axle tunes. Longer bolts for the pinion support are included with the kit. \u003c\/p\u003e\r\n\u003cp\u003eDepending on the center casting some trimming may be needed on the 3\/16” plate gussets for them to fit.  \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e***THIS TRUSS IS DESIGNED TO FIT CUSTOM AXLE ASSEMBLIES THAT HAVE BEEN UPGRADED TO 4” DIAMETER AXLE TUBES.  AXLES PULLED FROM FACTORY VEHICLES WILL NOT WORK. \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch4\u003eSuggested Parts\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003ca href=\"https:\/\/motobilt.com\/products\/upper-link-mount-rear-axle?_pos=3\u0026amp;_psq=upper+rear\u0026amp;_ss=e\u0026amp;_v=1.0\" target=\"_blank\" rel=\"noopener\"\u003eMB1569\u003c\/a\u003e - Universal Upper Triangulated Link Mount For Rear axle\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003ca href=\"https:\/\/motobilt.com\/products\/lower-link-mount-rear-axle\" target=\"_blank\" rel=\"noopener\"\u003eMB1571\u003c\/a\u003e - 4” Tube Triangulated Lower link Mount for Rear Axle\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB4094_-_Shipping.pdf?v=1644418046\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB4094_-_Assembly_Instructions.pdf?v=1644418046\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":39587216130132,"sku":"MB4094","price":419.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB4094-view-3.jpg?v=1647546786"},{"product_id":"double-triangulated-4-link-suspension-mounting-system-for-jeep-yj-tj-lj","title":"Double Triangulated 4 Link Suspension Mounting System for Jeep YJ\/TJ\/LJ","description":"\u003cp\u003eOne of the most difficult things to determine when building your own double triangulated 4 link suspension is exactly where to place all of the mounting points to provide you with good suspension articulation \u0026amp; correct vertical separation. Correct geometry is everything. We have taken all of the guess work out for you. This suspension system fits the 1987- 1995 Jeep YJ, the 1997-2006 Jeep TJ as well as the Jeep LJ.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Motobilt suspension mount system will provide you with exceptional suspension travel, it’ll be easy to connect with 1 ton axles, easy to clear engine oil pans, aftermarket engines, aftermarket transfer cases \u0026amp; driveshafts. You can design all of your upper \u0026amp; lower links to be straight, without bends, meaning they will be easy to fabricate.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWe have built-in numerous features to not only make it easy \u0026amp; fast to install, but will be easy to service. We provide quick access to major mechanical driveline parts like your aftermarket transfer case \u0026amp; driveshafts by designing the major structural members \u0026amp; skids to be removable.\u003c\/p\u003e\n\u003cdiv class=\"video-responsive\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/ZQF_SO0bIbs\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003eThe removable one piece heavy duty steel skid plate is designed with precision fitment around the front \u0026amp; rear cross members. We have countersunk all fasteners for a true smooth bottom which provides no hang up points for traversing obstacles. The skid plate is quick \u0026amp; easy to remove for maintenance. The skid plate also features weep holes for drainage.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eOnce the skid plate is removed, you can then quickly remove the new front heavy duty transmission cross member, as well as, remove the X shaped tubular cross bracing. This provides full access to remove the transmission \u0026amp; any aftermarket transfer case.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eOne of the issues when removing a front transmission cross member is that you have to disconnect the front lower control arms. With every other suspension system currently available, this means your front links will not be connected to the frame \u0026amp; the vehicle cannot be moved. We’ve solved this issue. We provide extra brackets that bolt into place for this type of maintenance. These brackets provide you with a temporary mounting location for your front lower links while the transmission cross member is temporarily removed. You can still move the vehicle around your shop with the front transmission cross removed.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAll link mounting points are designed with 5\/8” holes through 1\/4” thick steel plates. You can drill out the holes for larger diameters, if desired. The inside mounting distance of all link mounting points measure 2-5\/8” inside. This is a very common measurement that will allow you to use a variety of quality joints with high misalignment spacers.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eBoth the front \u0026amp; rear upper link mounts are meticulously designed to exactly fit the profile of the factory frame. Why is this important? The closer the fit, the tighter the gaps \u0026amp; the stronger the connection.\u003c\/p\u003e\n\u003cp\u003eOne important note is exhaust clearance.  The upper links are placed in a way to allow exhaust to clear on the non driveshaft side.  On our build we routed the exhaust from the header on the driveshaft side around the front of the engine.  On the opposite side we modified an off the shelf headed to allow the exhaust to exit over the upper link mount where it then mated back up in Y connection.  If you are installing a new engine or building engine mounts we recommend doing so after the suspension is installed so that you can better align the exhaust location where you want it.  \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe underside of the entire suspension sits at the same height as the factory skid, meaning zero loss of ground clearance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront link vertical separation at the frame = 7-9\/16”\u003c\/li\u003e\n\u003cli\u003eRear link vertical separation at the frame = 5-3\/16”\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB7009_-_Shipping.pdf?v=1664207776\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eNote:  \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYour wheelbase will be determined by how long you build your suspension links in the front and rear.  I.e. Yes you can stretch your wheelbase by building longer suspension links.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull hydraulic steering\u003c\/strong\u003e is required if running the front as a 4 link.  \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering box: \u003c\/strong\u003eIf you are using a steering box then simply remove one upper and install a track bar.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eYou do NOT have to remove the body to install.\u003c\/li\u003e\n\u003cli\u003eDepending on drivetrain\/axle choices a two piece front drive shaft maybe required.\u003c\/li\u003e\n\u003cli\u003eIf using a rebuildable\/cartridge style suspension joint the upper brackets may need to be trimmed for the body of the joint to clear. \u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eSuggested Parts Not Included below:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/motobilt.com\/products\/universal-transmission-cross-member-kit\" target=\"_blank\"\u003eUniversal Transmission Cross member kit par number MB3077\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/motobilt.com\/products\/rear-upper-control-arm-mounts?variant=39434267492436\" target=\"_blank\"\u003eRear Axle Upper Control Arm Mounts for Truss MB3049\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB7009_-_Assembly_eec9aa61-1e86-4516-ae13-17fa9d2c1dca.pdf?v=1667335947\" class=\"btn\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":39826610389076,"sku":"MB7009","price":2629.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/MB7009-view-1.jpg?v=1668552550"},{"product_id":"upper-link-mount-front-axle","title":"Universal Upper Triangulated Link Mount - Front Axle","description":"\u003cp\u003eUpgrade your vehicle's suspension setup with the MB1568 Upper Triangulated Link Mount for the Front Axle, a universal fit solution designed to enhance the durability and performance of your off-road rig. Precision-engineered for those who demand the best in strength and reliability, this mount is an essential component for any serious off-roader or custom vehicle builder. This part is laser cut from .250\" high strength steel plate and formed on our CNC press brakes here at Motobilt. The tabs are sold in the left and right pair unwelded.  This upper link set is not connected allowing the installer to locate the mounts on the truss in the best possible location to clear things like starters, oil pans and more. This is the same kit that was used on the Jeep YJ project El-Jefe.\u003c\/p\u003e\r\n\u003ch4\u003eFit:\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eUniversal:\u003c\/strong\u003e Designed to fit a wide range of vehicles, making it a versatile choice for custom builds and modifications.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eBolt Hole Size: 5\u003c\/strong\u003e\/8”\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eMounting\u003c\/strong\u003e \u003cstrong\u003eWidth\u003c\/strong\u003e: 2 5\/8” \u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eSold as a pair\u003c\/strong\u003e\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eProudly Made in the USA:\u003c\/strong\u003e Crafted with the highest standards of quality and durability in mind, ensuring a product that withstands the toughest conditions.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eRobust Construction:\u003c\/strong\u003e Made from premium materials to offer unparalleled strength and longevity.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e Each mount measures 3.25\" in height, 5.6\" in width, and 4.4\" in depth, providing a compact yet sturdy base for your lower links.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Weighing in at 5.5 lbs, these mounts add minimal weight to your setup while offering maximum support and rigidity.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1568_-_Shipping.pdf?v=1709653994\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":40482187837524,"sku":"MB1568","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1568-1.jpg?v=1715621174"},{"product_id":"upper-link-mount-rear-axle","title":"Universal Upper Triangulated Link Mount for Rear Axle","description":"\u003cdiv\u003e\r\n\u003cp\u003eUpgrade your vehicle's suspension setup with the MB1569 Upper Triangulated Link Mount for the Rear Axle, a universal fit solution designed to enhance the durability and performance of your off-road rig. Precision-engineered for those who demand the best in strength and reliability, this mount is an essential component for any serious off-roader or custom vehicle builder.\u003c\/p\u003e\r\n\u003cp\u003eThe bracket set is laser cut .250\" high strength steel plate formed on our CNC press brakes here at Motobilt. This works great on a triangulated rear a suspension setup and is the same one that was used on the Jeep YJ project El-Jefe.\u003c\/p\u003e\r\n\u003ch4\u003eFit:\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eUniversal:\u003c\/strong\u003e Designed to fit a wide range of vehicles, making it a versatile choice for custom builds and modifications.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eBolt Hole Size: 5\u003c\/strong\u003e\/8”\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eLink Angle: \u003c\/strong\u003e18 degrees each\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eMounting width:\u003c\/strong\u003e 2 5\/8” mounting width for suspension joints.\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eProudly Made in the USA:\u003c\/strong\u003e Crafted with the highest standards of quality and durability in mind, ensuring a product that withstands the toughest conditions.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eRobust Construction:\u003c\/strong\u003e Made from premium materials to offer unparalleled strength and longevity.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e Each mount measures 3.8\" in height, 15.4\" in width, and 4.7\" in depth, providing a compact yet sturdy base for your lower links.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Weighing in at 7 lbs, these mounts add minimal weight to your setup while offering maximum support and rigidity.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1569_-_Shipping.pdf?v=1709654263\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":40482194391124,"sku":"MB1569","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1569-Image01.png?v=1712607559"},{"product_id":"4-inch-tube-lower-link-mount-front-axle","title":"4 Inch Tube Lower Link Mount for Front Axle","description":"\u003cp\u003eUpgrade your vehicle's suspension setup with the MB1570 Lower Link Mount for the Front Axle, a universal fit solution designed to enhance the durability and performance of your off-road rig. Precision-engineered for those who demand the best in strength and reliability.\u003c\/p\u003e\r\n\u003cp\u003eThis lower link bracket set is laser cut form high strength .250\" steel plate and the formed on our CNC press brakes here at Motobilt.  This lower link bracket setup is designed to specifically fit 4\" diameter axle tubes. These are the same brackets used for the front lower mounts on the project El-Jefe Jeep YJ build.  \u003c\/p\u003e\r\n\u003ch4\u003eFit:\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eUniversal:\u003c\/strong\u003e Designed to fit a wide range of vehicles, making it a versatile choice for custom builds and modifications.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eAxle Tube Diameter:\u003c\/strong\u003e Designed for 4\" axle tubes but will fit 3.5” as well\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eBolt Hole Size: 5\/8\u003c\/strong\u003e”\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eLink Angle: \u003c\/strong\u003eThese mounts angle inward at 16 degrees. \u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eProudly Made in the USA:\u003c\/strong\u003e Crafted with the highest standards of quality and durability in mind, ensuring a product that withstands the toughest conditions.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eRobust Construction:\u003c\/strong\u003e Made from premium materials to offer unparalleled strength and longevity.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e Each mount measures 3.9\" in height, 3.7\" in width, and 5\" in depth, providing a compact yet sturdy base for your lower links.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Weighing in at 7.8 lbs, these mounts add minimal weight to your setup while offering maximum support and rigidity.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1570_-_Shipping.pdf?v=1709653427\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":40482202255444,"sku":"MB1570","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1570-1.jpg?v=1715618792"},{"product_id":"lower-link-mount-rear-axle","title":"4\" Tube Triangulated Lower Link Mount for Rear Axle","description":"\u003cdiv\u003e\r\n\u003cdiv class=\"flex-shrink-0 flex flex-col relative items-end\"\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv class=\"pt-0.5\"\u003e\r\n\u003cdiv class=\"gizmo-shadow-stroke flex h-6 w-6 items-center justify-center overflow-hidden rounded-full\"\u003e\u003cbr\u003e\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv class=\"relative flex w-full flex-col agent-turn\"\u003e\r\n\u003cdiv class=\"flex-col gap-1 md:gap-3\"\u003e\r\n\u003cdiv class=\"flex flex-grow flex-col max-w-full\"\u003e\r\n\u003cdiv data-message-author-role=\"assistant\" data-message-id=\"ae5444ac-2542-42c1-a9d5-90574e1cc49c\" class=\"min-h-[20px] text-message flex flex-col items-start gap-3 whitespace-pre-wrap break-words [.text-message+\u0026amp;]:mt-5 overflow-x-auto\"\u003e\r\n\u003cdiv class=\"markdown prose w-full break-words dark:prose-invert light\"\u003e\r\n\u003cp\u003eUpgrade your vehicle's suspension setup with the MB1571 Triangulated Lower Link Mount for the Rear Axle, a universal fit solution designed to enhance the durability and performance of your off-road rig. Precision-engineered for those who demand the best in strength and reliability, this mount is an essential component for any serious off-roader or custom vehicle builder. This part is laser cut from .250\" high strength steel and formed on our CNC press brakes here at Motobilt.  This mount is sold in a pair for the lower links and designed with rear axle tubes in mind where there is more clearance around the differential. Works great in a double triangulated 4 link suspension such as the El-Jefe Jeep YJ build, the BlackOut JKU build, or the Red JLU double triangulated 4 link rear. \u003c\/p\u003e\r\n\u003ch4\u003eFit:\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eUniversal:\u003c\/strong\u003e Designed to fit a wide range of vehicles, making it a versatile choice for custom builds and modifications.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eAxle Tude Diameter:\u003c\/strong\u003e Designed to fit 3.5” to 4\" axle tubes. \u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eBolt Hole Size: 5\/8”\u003c\/strong\u003e\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eLink Angle: \u003c\/strong\u003eThese mounts are angled inward at 25 degrees each.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eProudly Made in the USA:\u003c\/strong\u003e Crafted with the highest standards of quality and durability in mind, ensuring a product that withstands the toughest conditions.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eRobust Construction:\u003c\/strong\u003e Made from premium materials to offer unparalleled strength and longevity.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e Each mount measures 3.8\" in height, 7.6\" in width, and 6.2\" in depth, providing a compact yet sturdy base for your lower links.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Weighing in at 11.5 lbs, these mounts add minimal weight to your setup while offering maximum support and rigidity.\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eSold as a\u003c\/strong\u003e pair\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1571_-_Shipping.pdf?v=1709653918\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":40482216935508,"sku":"MB1571","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1571-parts.jpg?v=1715613200"},{"product_id":"reducer-spacer-weld-washer-3-4-to-5-8","title":"Reducer Spacer\/Weld Washer (8 pack) 3\/4 to 9\/16","description":"\u003cp\u003eThe Motobilt reducer spacer\/weld washer allows you to convert your 3\/4” bolt hole to a 9\/16” hole. This has many applications from fixing a damaged hole to reducing the hole size.  Simply insert the spacer into a 3\/4” drilled hole and weld the perimeter of the washer to the bracket.\u003c\/p\u003e\r\n\u003cp\u003e*Sold as a pack of 8\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e: 1 1\/4” O.D.  -  1\/4” depth \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMaterial: \u003c\/strong\u003eSteel\u003cbr\u003e\u003c\/p\u003e\r\n\u003cp\u003eThis can be used on 1\/4” steel as is or shave the shoulder down to work with thinner material.  \u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1575-750563_-_Shipping_cf4ee5e1-9b37-4454-8dc6-e6593e3f27aa.pdf?v=1715108062\" rel=\"noopener\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":40700010987604,"sku":"MB1575","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1575-8-pack.jpg?v=1714750839"},{"product_id":"double-triangulated-4-link-suspension-for-jeep-jt-gladiator-20-21-5","title":"Double Triangulated 4 Link Suspension for Jeep JT Gladiator 20-21.5","description":"\u003cp\u003e\u003cb data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003e2020 - 2021.5 Jeep Gladiator 3.6\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eThis is the point where a Gladiator stops being modified and starts being built.\u003c\/p\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eNot at the shocks.\u003c\/p\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eNot at the axles.\u003c\/p\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eUnder the Jeep.\u003c\/p\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eWhen the factory crossmembers come out and the belly opens up, you can finally see what the JT frame is and what it is not. It was never designed for large tires, heavy axles, or true link geometry. It works, but it limits what the truck can become.\u003c\/p\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eThis system replaces that limitation with a foundation.\u003c\/p\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eThe Motobilt JT 4 Link Suspension Bracket and Skid System removes the guesswork and replaces it with fixed geometry, structural crossmembers, and protected mounting points that allow the Gladiator to grow without being rebuilt twice. It supports a true double triangulated rear 4 link and gives you the choice of a 3 link front with track bar for mechanical steering or a triangulated 4 link front for full hydraulic steering.\u003c\/p\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eThis is not a collection of brackets. It is a coordinated system that ties suspension geometry, drivetrain protection, and service access into one package.\u003c\/p\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eA heavy duty removable transmission crossmember replaces the factory unit and carries the front lower link mounts. A new rear frame crossmember becomes a structural member that supports the rear 4 link brackets and skid mounting. Together, they create load paths that make sense when the Jeep is heavy, flexed, and working hard.\u003c\/p\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eSkid plates follow the contours of the drivetrain instead of hanging below it. They sit tight, slide clean, and protect the oil pan, transmission, exhaust, and lines without creating new hang-up points. Countersunk hardware and recessed bolts stay protected, but remain serviceable with standard tools. Access panels are built in so maintenance does not turn into disassembly.\u003c\/p\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eThat matters when the build gets used.\u003c\/p\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eThis system keeps your options open. Run factory style shocks and coil springs, or step up to coilovers or ORI struts. Build the front as a 3 link or a full 4 link. Support larger tires, heavier axles, and aftermarket transfer cases like the Atlas II or Atlas IV. The factory fuel tank moves to the rear, and the exhaust is modified because the underside is no longer treated as an afterthought.\u003c\/p\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eInstallation requires cutting and professional welding to the factory frame. The body does not need to come off. The brackets locate off factory frame holes up front, while the rear keys into the supplied crossmember and scribes to the inside of the frame for accurate placement. Parts ship as fully welded subassemblies in raw steel, ready to be integrated into the build.\u003c\/p\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eOnce installed, the Gladiator is no longer defined by what it started as. Suspension loads into reinforced structure. Geometry is fixed. Protection is handled. Service access is planned. The Jeep becomes a platform that can handle whatever direction the build takes next.\u003c\/p\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eIf you are planning bigger tires, heavier axles, or a real suspension, this is the line in the sand. Everything before it is compromise. Everything after it finally makes sense.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cb data-originalcomputedfontsize=\"18.719999\" data-removefontsize=\"true\"\u003eSpecifications\u003c\/b\u003e\u003c\/h3\u003e\n\u003cdiv class=\"quoted-text\"\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eFrame mounted bracket and skid system for Jeep JT\u003c\/p\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eSupports true double triangulated rear 4 link suspension\u003c\/p\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eFront suspension configurable as 3 link with track bar or triangulated 4 link\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eHeavy duty removable transmission crossmember with integrated front lower link mounts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eRear structural frame crossmember supporting rear 4 link bracketry\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"quoted-text\"\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eEngine skid protecting oil pan, transmission, exhaust, and transfer case.\u003c\/p\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eSkid plate has built in access panels for oil changes and front driveshaft access.\u003c\/p\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eSkid plates formed from 1\/4 inch high grade steel with CNC press brake bends\u003c\/p\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eAll joint plates cut from 1\/4 inch high grade steel\u003c\/p\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eAccepts 2-5\/8 inch wide joints with 5\/8 inch mounting holes\u003c\/p\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eCountersunk skid hardware and recessed pivot bolts\u003c\/p\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eMachined threaded skid mounting points\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eFully welded subassemblies shipped in raw steel\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eWeight: 265 lbs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRequires 68.5” minimum axle width. I.e. Widetrack axles\u003c\/li\u003e\n\u003cli\u003eRequires custom exhaust work and rerouting of brake lines\u003c\/li\u003e\n\u003cli\u003eWill work with V-8 swaps with modifications to the engine mounting brackets. \u003c\/li\u003e\n\u003cli\u003eWhen running 2 piece rear drive shaft you will need \u003ca href=\"https:\/\/motobilt.com\/products\/carrier-bearing-bracket-for-jeep-gladiator-4-link-suspension?_pos=1\u0026amp;_sid=3533118d6\u0026amp;_ss=r\" rel=\"noopener\" target=\"_blank\"\u003eMB1583 Carrier Bearing Bracket\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eRecommended:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/fuel-cell-for-jeep-gladiator-4-link-suspension\" target=\"_blank\"\u003eMB5083 \u003c\/a\u003e- Fuel Cell for Jeep Gladiator 4 Link Suspension\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eFits:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003e2020-2021.5  Jeep JT Gladiator 3.6 \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e(The 2020-2021.5 model front cross member has 3 bolts that enter from the outside of the passenger side frame rail where as the 21.5 and up do not)\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB7016_-_Shipping.pdf?v=1765984848\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB7016_-_Assembly_Instructions.pdf?v=1765984864\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":42762917216340,"sku":"MB7016","price":3149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB7016-square.jpg?v=1780928129"},{"product_id":"double-triangulated-4-link-suspension-for-jeep-jt-gladiator-21-5","title":"Double Triangulated 4 Link Suspension for Jeep JT Gladiator 21.5+","description":"\u003cp\u003e\u003cb data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003e2021.5+ Jeep Gladiator 3.6\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eThis is the point where a Gladiator stops being modified and starts being built.\u003c\/p\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eNot at the shocks.\u003c\/p\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eNot at the axles.\u003c\/p\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eUnder the Jeep.\u003c\/p\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eWhen the factory crossmembers come out and the belly opens up, you can finally see what the JT frame is and what it is not. It was never designed for large tires, heavy axles, or true link geometry. It works, but it limits what the truck can become.\u003c\/p\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eThis system replaces that limitation with a foundation.\u003c\/p\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eThe Motobilt JT 4 Link Suspension Bracket and Skid System removes the guesswork and replaces it with fixed geometry, structural crossmembers, and protected mounting points that allow the Gladiator to grow without being rebuilt twice. It supports a true double triangulated rear 4 link and gives you the choice of a 3 link front with track bar for mechanical steering or a triangulated 4 link front for full hydraulic steering.\u003c\/p\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eThis is not a collection of brackets. It is a coordinated system that ties suspension geometry, drivetrain protection, and service access into one package.\u003c\/p\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eA heavy duty removable transmission crossmember replaces the factory unit and carries the front lower link mounts. A new rear frame crossmember becomes a structural member that supports the rear 4 link brackets and skid mounting. Together, they create load paths that make sense when the Jeep is heavy, flexed, and working hard.\u003c\/p\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eSkid plates follow the contours of the drivetrain instead of hanging below it. They sit tight, slide clean, and protect the oil pan, transmission, exhaust, and lines without creating new hang-up points. Countersunk hardware and recessed bolts stay protected, but remain serviceable with standard tools. Access panels are built in so maintenance does not turn into disassembly.\u003c\/p\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eThat matters when the build gets used.\u003c\/p\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eThis system keeps your options open. Run factory style shocks and coil springs, or step up to coilovers or ORI struts. Build the front as a 3 link or a full 4 link. Support larger tires, heavier axles, and aftermarket transfer cases like the Atlas II or Atlas IV. The factory fuel tank moves to the rear, and the exhaust is modified because the underside is no longer treated as an afterthought.\u003c\/p\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eInstallation requires cutting and professional welding to the factory frame. The body does not need to come off. The brackets locate off of the factory frame holes up front, while the rear keys into the supplied crossmember and scribes to the inside of the frame for accurate placement. Parts ship as fully welded subassemblies in raw steel, ready to be integrated into the build.\u003c\/p\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eOnce installed, the Gladiator is no longer defined by what it started as. Suspension loads into reinforced structure. Geometry is fixed. Protection is handled. Service access is planned. The Jeep becomes a platform that can handle whatever direction the build takes next.\u003c\/p\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eIf you are planning bigger tires, heavier axles, or a real suspension, this is the line in the sand. Everything before it is compromise. Everything after it finally makes sense.\u003c\/p\u003e\r\n\u003chr\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003ch3\u003e\u003cb data-originalcomputedfontsize=\"18.719999\" data-removefontsize=\"true\"\u003eSpecifications\u003c\/b\u003e\u003c\/h3\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cdiv class=\"quoted-text\"\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eFrame mounted bracket and skid system for Jeep JT\u003c\/p\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eSupports true double triangulated rear 4 link suspension\u003c\/p\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eFront suspension configurable as 3 link with track bar or triangulated 4 link\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eHeavy duty removable transmission crossmember with integrated front lower link mounts\u003c\/p\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eRear structural frame crossmember supporting rear 4 link bracketry\u003c\/p\u003e\r\n\u003cdiv class=\"quoted-text\"\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eEngine skid protecting oil pan, transmission, and transfer case.\u003c\/p\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eSkid plate has built in access panels for oil changes and front driveshaft access.\u003c\/p\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eSkid plates formed from 1\/4 inch high grade steel with CNC press brake bends\u003c\/p\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eAll joint plates cut from 1\/4 inch high grade steel\u003c\/p\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eAccepts 2-5\/8 inch wide joints with 5\/8 inch mounting holes\u003c\/p\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eCountersunk skid hardware and recessed pivot bolts\u003c\/p\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eMachined threaded skid mounting points\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eFully welded subassemblies shipped in raw steel\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eWeight: 265 lbS\u003cbr\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRequires 68” minimum axle width. I.e. Widetrack axles\u003c\/li\u003e\r\n\u003cli\u003eRequires custom exhaust work and rerouting of brake lines\u003c\/li\u003e\r\n\u003cli\u003eWill work with V-8 swaps with modifications to the engine mounting brackets. \u003c\/li\u003e\r\n\u003cli\u003eWhen running 2-piece rear drive shaft you will need \u003ca href=\"https:\/\/motobilt.com\/products\/carrier-bearing-bracket-for-jeep-gladiator-4-link-suspension?_pos=1\u0026amp;_sid=3533118d6\u0026amp;_ss=r\" rel=\"noopener\" target=\"_blank\"\u003eMB1583 Carrier Bearing Bracket\u003c\/a\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cb data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eRecommended:\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/fuel-cell-for-jeep-gladiator-4-link-suspension\" target=\"_blank\"\u003eMB5083 \u003c\/a\u003e- Fuel Cell for Jeep Gladiator 4 Link Suspension\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cb data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003eFits:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cp data-originalcomputedfontsize=\"16\" data-removefontsize=\"true\"\u003e2021.5–Current Jeep JT Gladiator 3.6\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB7017_-_Shipping.pdf?v=1765984849\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB7017_-_Assembly_Instructions.pdf?v=1765984847\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":42762918527060,"sku":"MB7017","price":3149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB7017-square.jpg?v=1780928281"},{"product_id":"double-triangulated-10-stretch-suspension-kit-for-jeep-wrangler-jk","title":"Double Triangulated 10\" Stretch Suspension Kit for Jeep Wrangler JK 2007-2011","description":"\u003cp\u003e\u003cspan\u003eThere is a point in a short wheelbase build where the rear axle placement matters more than any single component. You see it in departure angle, in climbs that unload the rear, and in how hard the Jeep has to work just to stay settled. This system starts at that moment. The axle moves back. The wheelbase grows. The Jeep stops feeling rushed and starts feeling planted.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis kit exists for builders who know the factory 2 door JK layout is a compromise. The stock rear suspension and wheelbase limit stability, tire size, and axle choice. Pushing the rear axle back up to 10 inches changes how the Jeep behaves everywhere, on climbs, descents, and at speed. This system replaces factory geometry with a true double triangulated rear 4 link foundation that supports that stretch correctly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOnce installed, the rear axle is no longer fighting short links or factory constraints. The suspension loads into real structure, link separation is controlled, and axle movement stays predictable through the full cycle. The added wheelbase calms the chassis, improves departure, and gives larger tires room to work without crowding the body or suspension. With the use of the rear coilover towers your suspension will be dialed in for any terrain.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis system is designed to work as a complete rear solution. A dedicated rear back half, bumper, fuel cell, and rear stretch coilover towers are available to support the axle stretch and shock placement required for long travel suspension. Together, they create a rear layout that is no longer limited by the factory frame or fuel tank location.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eRear 4 link suspension system for 2007–2011 Jeep JK 2 door\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTrue double triangulated rear suspension layout\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAllows rear axle stretch up to 10 inches\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFrame mounted upper and lower link brackets\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAccepts 2-5\/8 inch wide joints with 5\/8 inch mounting holes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eJoint mounting holes can be enlarged if desired\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRear suspension designed to support  coilovers or struts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCompatible with rear back half, bumper, fuel cell, and rear stretch coilover towers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis system requires cutting and welding to the factory frame and is intended for experienced fabricators. Relocation of the factory fuel tank is required to accommodate axle stretch and rear suspension geometry. The body does not need to be removed. All components are designed to establish repeatable geometry so the suspension does not rely on guesswork during install.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOnce complete, the rear of the Jeep is no longer dictated by factory limitations. Service access improves, suspension tuning becomes straightforward, and future upgrades are supported by the structure already in place.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhen the axle moves back and the suspension finally has room to work, the 2 door JK stops feeling short. It starts feeling deliberate.\u003c\/span\u003e\u003cspan class=\"gmail-C9DxTc\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" class=\"gmail-zfr3Q gmail-CDt4Ke\"\u003e\u003cstrong\u003e\u003cspan class=\"gmail-C9DxTc\"\u003eFits:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"gmail-n8H08c gmail-UVNKR\"\u003e\n\u003cli dir=\"ltr\" class=\"gmail-zfr3Q gmail-TYR86d eD0Rn\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\" class=\"gmail-zfr3Q gmail-CDt4Ke\"\u003e\u003cspan class=\"gmail-C9DxTc\"\u003e2007-2011 \u003c\/span\u003e\u003cspan class=\"gmail-C9DxTc\"\u003eJeep \u003c\/span\u003e\u003cspan class=\"gmail-C9DxTc\"\u003eWrangler JK 3.8L 2 Door\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\" class=\"gmail-zfr3Q gmail-CDt4Ke\"\u003e\u003cspan class=\"gmail-C9DxTc\"\u003eSpecifications:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"gmail-n8H08c gmail-UVNKR\"\u003e\n\u003cli dir=\"ltr\" class=\"gmail-zfr3Q gmail-TYR86d eD0Rn\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\" class=\"gmail-zfr3Q gmail-CDt4Ke\"\u003e\u003cspan class=\"gmail-C9DxTc\"\u003eDimensions H\/W\/D: \u003c\/span\u003e\u003cspan class=\"gmail-C9DxTc\"\u003e11.8\u003c\/span\u003e\u003cspan class=\"gmail-C9DxTc\"\u003e\" \/ \u003c\/span\u003e\u003cspan class=\"gmail-C9DxTc\"\u003e45\u003c\/span\u003e\u003cspan class=\"gmail-C9DxTc\"\u003e\" \/ \u003c\/span\u003e\u003cspan class=\"gmail-C9DxTc\"\u003e72.9\u003c\/span\u003e\u003cspan class=\"gmail-C9DxTc\"\u003e\"\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" class=\"gmail-zfr3Q gmail-TYR86d eD0Rn\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\" class=\"gmail-zfr3Q gmail-CDt4Ke\"\u003e\u003cspan class=\"gmail-C9DxTc\"\u003eWeight:\u003c\/span\u003e\u003cspan class=\"gmail-C9DxTc\"\u003e 220 \u003c\/span\u003e\u003cspan class=\"gmail-C9DxTc\"\u003elbs\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB7019_-_Shipping.pdf?v=1765983906\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB7019_-_Assembly_Instructions.pdf?v=1765983907\" class=\"btn\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":42769539203156,"sku":"MB7019","price":2899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB07019-square.jpg?v=1780927345"},{"product_id":"double-triangulated-10-stretch-suspension-kit-for-jeep-wrangler-jk-1","title":"Double Triangulated 10\" Stretch Suspension Kit for Jeep Wrangler JK 2012-2018","description":"\u003cp\u003e\u003cspan\u003eThere is a point in a short wheelbase build where the rear axle placement matters more than any single component. You see it in departure angle, in climbs that unload the rear, and in how hard the Jeep has to work just to stay settled. This system starts at that moment. The axle moves back. The wheelbase grows. The Jeep stops feeling rushed and starts feeling planted.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis kit exists for builders who know the factory 2 door JK layout is a compromise. The stock rear suspension and wheelbase limit stability, tire size, and axle choice. Pushing the rear axle back up to 10 inches changes how the Jeep behaves everywhere, on climbs, descents, and at speed. This system replaces factory geometry with a true double triangulated rear 4 link foundation that supports that stretch correctly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOnce installed, the rear axle is no longer fighting short links or factory constraints. The suspension loads into real structure, link separation is controlled, and axle movement stays predictable through the full cycle. The added wheelbase calms the chassis, improves departure, and gives larger tires room to work without crowding the body or suspension. With the use of the rear coilover towers your suspension will be dialed in for any terrain.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis system is designed to work as a complete rear solution. A dedicated rear back half, bumper, fuel cell, and rear stretch coilover towers are available to support the axle stretch and shock placement required for long travel suspension. Together, they create a rear layout that is no longer limited by the factory frame or fuel tank location.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eRear 4 link suspension system for 2012–2018 Jeep JK 2 door\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTrue double triangulated rear suspension layout\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAllows rear axle stretch up to 10 inches \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFrame mounted upper and lower link brackets\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAccepts 2-5\/8 inch wide joints with 5\/8 inch mounting holes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eJoint mounting holes can be enlarged if desired\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRear suspension designed to support coilovers or struts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCompatible with rear back half, bumper, fuel cell, and rear stretch coilover towers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis system requires cutting and welding to the factory frame and is intended for experienced fabricators. Relocation of the factory fuel tank is required to accommodate axle stretch and rear suspension geometry. The body does not need to be removed. All components are designed to establish repeatable geometry so the suspension does not rely on guesswork during install.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOnce complete, the rear of the Jeep is no longer dictated by factory limitations. Service access improves, suspension tuning becomes straightforward, and future upgrades are supported by the structure already in place.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhen the axle moves back and the suspension finally has room to work, the 2 door JK stops feeling short. It starts feeling deliberate.\u003c\/span\u003e\u003cspan class=\"gmail-C9DxTc\"\u003e\u003c\/span\u003e\u003cspan class=\"gmail-C9DxTc\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"gmail-zfr3Q gmail-CDt4Ke\" dir=\"ltr\"\u003e\u003cstrong\u003e\u003cspan class=\"gmail-C9DxTc\"\u003eFits:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"gmail-n8H08c gmail-UVNKR\"\u003e\n\u003cli class=\"gmail-zfr3Q gmail-TYR86d eD0Rn\" dir=\"ltr\"\u003e\n\u003cp class=\"gmail-zfr3Q gmail-CDt4Ke\" role=\"presentation\" dir=\"ltr\"\u003e\u003cspan class=\"gmail-C9DxTc\"\u003e2012-2018 Jeep Wrangler JK 3.6L - 2 door\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"gmail-zfr3Q gmail-CDt4Ke\" dir=\"ltr\"\u003e\u003cstrong\u003e\u003cspan class=\"gmail-C9DxTc\"\u003eSpecifications:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"gmail-n8H08c gmail-UVNKR\"\u003e\n\u003cli class=\"gmail-zfr3Q gmail-TYR86d eD0Rn\" dir=\"ltr\"\u003e\n\u003cp class=\"gmail-zfr3Q gmail-CDt4Ke\" role=\"presentation\" dir=\"ltr\"\u003e\u003cspan class=\"gmail-C9DxTc\"\u003eDimensions H\/W\/D: 11.8\" \/ 45\" \/ 72.9\"\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"gmail-zfr3Q gmail-TYR86d eD0Rn\" dir=\"ltr\"\u003e\n\u003cp class=\"gmail-zfr3Q gmail-CDt4Ke\" role=\"presentation\" dir=\"ltr\"\u003e\u003cspan class=\"gmail-C9DxTc\"\u003eWeight: 220 lbs\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB7020_-Shipping.pdf?v=1765983906\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB7020_-_Assembly_Instructions.pdf?v=1765983906\" class=\"btn\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":42769540284500,"sku":"MB7020","price":2899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB7020-square.jpg?v=1780926172"},{"product_id":"carrier-bearing-bracket-for-jeep-gladiator-4-link-suspension","title":"Carrier Bearing Bracket for Jeep Gladiator 4 Link Suspension","description":"\u003cp\u003e\u003cspan\u003eYou see it during final mockup. The suspension is right. The pinion angle is where it should be. Now the driveline needs to follow suit without creating vibration or forcing compromises. This bracket is what lets that happen cleanly.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA double triangulated rear 4 link changes how the rear of a Gladiator is laid out. When running a two piece rear driveshaft, the carrier bearing needs a solid, correctly positioned mounting point. This bracket exists to put the carrier bearing back where it belongs while working within a linked suspension layout.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe MB1583 welds directly to the Motobilt double triangulated rear 4 link crossmember and provides a stable mounting surface for a two piece rear driveshaft carrier bearing. It places the bearing at the factory height to maintain proper driveline angles and allows one inch of front to back adjustment to fine tune placement. Once set, the driveline stays smooth and predictable through suspension travel\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSpecs \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eCarrier bearing bracket for Jeep Gladiator\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDesigned for two piece rear driveshafts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWelds to Motobilt double triangulated rear 4 link crossmember\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOne inch of front to back adjustment\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eConstructed from A36 steel\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDimensions: 3.8 inches high, 12.9 inches wide, 5.1 inches deep\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWeight: 4.3 pounds\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eCompatibility\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eFits Motobilt MB7016\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFits Motobilt MB7017\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eWelding is required. This bracket is intended for experienced fabricators installing a linked rear suspension with a two piece driveshaft. Once installed, carrier bearing service and driveline setup remain straightforward without introducing unnecessary complexity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eClose with Certainty\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhen the suspension geometry is right, the driveline should follow without drama. This bracket keeps everything aligned and lets the Gladiator move the way it was built to.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1583_-_Shipping.pdf?v=1767824257\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1583_-_Assembly_Instructions.pdf?v=1767824257\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":42811724333140,"sku":"MB1583","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1583-Cut-Out.jpg?v=1767900242"},{"product_id":"fuel-cell-for-jeep-gladiator-4-link-suspension","title":"Fuel Cell for Jeep Gladiator 4 Link Suspension","description":"\u003cp dir=\"auto\"\u003eThe moment a Gladiator moves into real suspension geometry, the factory fuel tank becomes the obstacle. Link separation tightens. Clearance disappears. The rear of the truck starts negotiating instead of working. Relocating the tank is not an upgrade at that point. It’s a requirement.\u003c\/p\u003e\n\u003cp\u003eA double triangulated rear 4 link needs space the factory Gladiator tank occupies. This system moves the fuel capacity behind the rear axle so suspension geometry, travel, and clearance can exist without compromise. It was built to support serious rear suspension layouts while retaining factory fuel system functionality.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cspan\u003eThe MB5083 relocates approximately 25 gallons of fuel to the rear of the truck in an aluminum tank protected by a 3\/16 inch steel skid plate. This is gain of over 3 additional gallons over the stock tank. With the factory tank removed, link geometry and rear suspension components gain the space they need to operate correctly.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThe system is designed to reuse the factory fuel pump and EVAP components. A dedicated EVAP relocation bracket is included and must be welded to the crossmember, placing the canister in a protected and functional location without custom fabrication.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThis tank can also be used with a factory uncut frame and with the Motobilt bobbed bed configuration. The factory rear track bar mount must be removed to clear the relocated tank and skid.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eHighlights:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eRear mounted fuel tank and skid system for Jeep Gladiator\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eApproximately 25 gallon aluminum fuel tank (3 more than factory)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e3\/16 inch steel skid plate\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDesigned to support double triangulated rear suspension layouts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIncludes hardware to reuse factory fuel pump and EVAP system\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEVAP canister relocation bracket included\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp dir=\"auto\"\u003eEVAP bracket must be welded to Motobilt bobbed bed cross member\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003eInstallation requires removal of the factory fuel tank. Welding is required to attach the EVAP relocation bracket to the cross member.  The rear track bar mount must be removed along with the rear most crossmember. This system is intended for experienced fabricators building linked rear suspension setups. If installing with a bobbed bed a receiver hitch will not work. \u003c\/p\u003e\n\u003cp\u003eOnce installed, fuel capacity, serviceability, and system integration remain intact while the rear suspension gains the space it demands.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cspan\u003eWhen suspension geometry matters more than factory packaging, the fuel system has to move. This tank does exactly that, cleanly, structurally, and without shortcuts.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5083_-_Shipping.pdf?v=1767824257\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003eInstructions\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5083_-_Assembly_Instructions.pdf?v=1767824257\" class=\"btn\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":42811727839316,"sku":"MB5083","price":1999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5083-square.jpg?v=1780925836"}],"url":"https:\/\/motobilt.com\/collections\/suspension-kits.oembed?page=5","provider":"Motobilt","version":"1.0","type":"link"}