{"title":"Tomahawk Series","description":"\u003csection class=\"collection-intro collection-intro--tomahawk\"\u003e\n  \u003ch2\u003eMotobilt Tomahawk Series\n\n  \u003c\/h2\u003e\n\u003cp\u003eAt some point, bolt-on parts stop solving the problem.\u003c\/p\u003e\n\n  \u003cp\u003eLarger tires, more suspension travel, and tougher obstacles quickly expose the limitations of factory-based layouts. Clearance disappears. Mounting points become weak. Parts start fighting each other because they were never designed to work together in the first place.\u003c\/p\u003e\n\n  \u003ch2\u003eBuilt for Serious Jeep Builds\u003c\/h2\u003e\n\n  \u003cp\u003eThe Motobilt Tomahawk Series was built for builders pushing past basic upgrades and into real modification. These are not standalone parts designed to fit around factory constraints. They are components designed to work together as a system, with shared geometry, mounting strategies, and clearances that support serious off-road builds.\u003c\/p\u003e\n\n  \u003cp\u003eThis is where high clearance actually means something.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy the Tomahawk Series Exists\u003c\/h2\u003e\n\n  \u003cp\u003eTomahawk bumpers, fenders, rockers, and armor are designed with the assumption that the vehicle is being pushed harder. Tire size increases. Suspension travel increases. Obstacles get more aggressive. The parts in this series are built to create the space and strength needed to support that next level of performance.\u003c\/p\u003e\n\n  \u003cp\u003eThe difference becomes obvious when parts are mixed incorrectly. A high-clearance fender from one system paired with rockers from another can create interference, weak transitions, and wasted space. The Tomahawk Series removes that guesswork by grouping components that were designed to function together from the start.\u003c\/p\u003e\n\n  \u003ch2\u003eDesigned as a System\u003c\/h2\u003e\n\n  \u003cp\u003eThis collection includes products such as Tomahawk front bumpers, Gladiator Tomahawk rear bumpers, Tomahawk front fenders, and matching rockers that follow the same lines and clearances. These parts are not just visually consistent. They are engineered to work as a unified setup.\u003c\/p\u003e\n\n  \u003cp\u003eThat matters during planning, during installation, and on the trail. When parts are designed as a system, the build comes together with better fitment, better function, and fewer surprises.\u003c\/p\u003e\n\n  \u003ch2\u003eWho the Tomahawk Series Is For\u003c\/h2\u003e\n\n  \u003cp\u003eTomahawk is for builders who are past the question of what simply bolts on and focused on what actually works when the trail gets real. If you are building a Jeep that prioritizes clearance, strength, and integration across the vehicle, this is where those parts live.\u003c\/p\u003e\n\n  \u003ch2\u003eShop the Tomahawk Series\u003c\/h2\u003e\n\n  \u003cp\u003eIf you want a coordinated system of bumpers, fenders, corner armor, and rockers designed to work together, the Motobilt Tomahawk Series gives you a clear path forward.\u003c\/p\u003e\n\u003c\/section\u003e","products":[{"product_id":"tomahawk-frame-chop-front-bumper-for-jeep-jk-jl-jt","title":"Tomahawk Frame Chop Front Bumper for Jeep JK, JL, JT","description":"\u003cp\u003eFrame Chop Front Bumpers are nothing new to the offroad community.  Here at Motobilt we wanted to raise the bar a little.  The Tomahawk front bumper was designed from concepts developed on the TJ Front Half Frame Kit we manufacture. Are you ready to take your Jeep JK, JL or Gladiator to the next level of style, function and capability? \u003c\/p\u003e\r\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Motobilt Tomahawk Front Winch Bumper offers many features for the avid off-roader.  This original \u0026amp; unique front frame chop bumper design features an upswept shape that gives you more clearance \u0026amp; increased approach angle than any other bumper \/ frame chop bumper available on the market. We integrated a second opening in the underside of the bumper which allows you to route your winch line directly downwards to suck down your front suspension, which in turn, lowers your center of gravity, increasing your vehicles' ability to climb steep obstacles. This concept is widely used in competitive rock crawling. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eCovering all Jeep Wrangler model years from 2007 through to current, this product fits all Jeep JK (2 door), JKU (4 door), JL (2 door), JLU (4 door) \u0026amp; Jeep JT Gladiator models. Permanent modification to \u0026amp; drilling of the frame is required. Slight clearance of the two forwardmost body mounts is required prior to installation.\u003c\/p\u003e\r\n\u003cp\u003eA vacuum Pump Relocation Bracket is required on the Jeep JK \/ JKU 2012-2018 to install the Motobilt Tomahawk Frame Chop Bumper.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eNOTE: You WILL NOT be able to return your vehicle back to factory bumpers after installation of this product.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eCheck out this video for all the details, install tips \u0026amp; more:\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=HwD17LrCp9w\" target=\"_blank\"\u003e\u003cimg data-mce-fragment=\"1\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/thumbnail-website_600x600.jpg?v=1613061879\"\u003e\u003c\/a\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis product ships as bare steel. For an even stronger connection, this product can also be welded to the factory frame.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eOur detailed installation instructions include color photos \u0026amp; step-by-step instructions to make your installation easy \u0026amp; fast.\u003c\/p\u003e\r\n\u003ch4\u003eFits:\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep Wrangler JK \/ JKU 2007-2018\u003c\/li\u003e\r\n\u003cli\u003eJeep Wrangler JL \/ JLU 2018-Current\u003c\/li\u003e\r\n\u003cli\u003eJeep Gladiator JT 2020-Current\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eJeep JK\/JKU Swaybar Compatibility:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eYou can reuse the factory swaybar, however, the Rubicon swaybar with the electronic disconnect IS NOT COMPATIBLE with this bumper. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis product is also compatible with the following Currie Antirock series swaybars:\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eOTHER Sway bar options from RockJock such as their Heavy Duty kits will fit as well!\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCE-9900JKF\u003c\/li\u003e\r\n\u003cli\u003eCE-9900JKFA\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eJeep JL\/JLU\/JT Gladiator Swaybar Compatibility:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe factory swaybar can be modified to fit this product, however, the Rubicon swaybar with the electronic disconnect IS NOT COMPATIBLE with this bumper. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis product is also compatible with the following Currie Antirock series swaybars:\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eOTHER Sway bar options from RockJock such as their Heavy Duty kits will fit as well!\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCE-9900JLF\u003c\/li\u003e\r\n\u003cli\u003eCE-9900JLFA\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWinch \u0026amp; Fairlead Compatibility:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe winch mounting pattern measures 10\" x 4.5\" \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis product is designed to accept a variety of brand names \u0026amp; physical sizes of recovery winches, including the complete Warn Zeon, EVO product lines up to their largest Warn Zeon winch model, the Warn Zeon 12-S Platinum. \u003cstrong\u003eThis product IS NOT COMPATIBLE with the Warn MB8274 winch OR the CTI models. In fact, we recommend any offset winch NOT be used with the Tomahawk bumper. Yes the Badlands will fit this bumper.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe winch fairlead mounting pattern measures 10\" center-to-center of the holes. This product is compatible with most Hawse Fairleads. We do not recommend using a roller fairlead with the Tomahawk Frame Chop Front Bumper. \u003c\/p\u003e\r\n\u003cp\u003eWe cannot cover all winches and variations.  The bumper will fit other winches. One way of looking at it is if the larger Zeon 12k will fit a smaller M8000 would fit in the same place. We do have the winch mounting holes slotted to accommodate different shape winches. \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eShips raw steel.  Must be painted or powder coated to prevent rust. See (\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/blogs\/first-blog\/steel-it?_pos=3\u0026amp;_sid=d366c9466\u0026amp;_ss=r\" target=\"_blank\"\u003eSteel-It\u003c\/a\u003e)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications \u003c\/h4\u003e\r\n\u003cp\u003eCheck out \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.youtube.com\/watch?v=HwD17LrCp9w\" target=\"_blank\"\u003ethis video\u003c\/a\u003e giving you all the features \u003cem\u003eand\u003c\/em\u003e installation tips\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eHigh clearance upswept design\u003c\/li\u003e\r\n\u003cli\u003eIntegrated winch mount\u003c\/li\u003e\r\n\u003cli\u003eRecessed holes for winch mounting\u003c\/li\u003e\r\n\u003cli\u003eIntegrated fairlead mount\u003c\/li\u003e\r\n\u003cli\u003eTwo winch routes\u003c\/li\u003e\r\n\u003cli\u003eMultiple swaybar mounting options\u003c\/li\u003e\r\n\u003cli\u003eBolt on design (weld on optional)\u003c\/li\u003e\r\n\u003cli\u003eShips as bare metal\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight: 62lbs (approx.)\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eIncreased approach angle\u003c\/li\u003e\r\n\u003cli\u003eAccepts multiple winch sizes \u0026amp; brands\u003c\/li\u003e\r\n\u003cli\u003eWinch routing straight down to axle\u003c\/li\u003e\r\n\u003cli\u003eRecessed winch mounting bolts will not get damaged\u003c\/li\u003e\r\n\u003cli\u003eSwaybar compatible\u003c\/li\u003e\r\n\u003cli\u003eOptional Bull Bar guards winch\u003c\/li\u003e\r\n\u003cli\u003eFast \u0026amp; easy installation\u003c\/li\u003e\r\n\u003cli\u003eCan be color matched to your vehicle\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb1149_-_shipping.pdf?v=1663085219\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ca class=\"btn\" href=\"\/products\/tomahawk-frame-chop-front-bumper-w-bull-bar-for-jeep-jk-jl-jt\" target=\"_blank\"\u003eWith Bull Bar Tube (MB1149-BB)\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eLight Bracket Mounts \u003ca href=\"https:\/\/motobilt.com\/products\/light-bracket-mounts-for-tomahawk-bumper\"\u003eMB2157\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eFairlead Light mount \u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/aluminum-universal-fairlead-light-mount-2\" target=\"_blank\"\u003eMB2154\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003eNOTES: If installing with no lift or just a small leveling kit there maybe slight rubbing if using the factory non rubicon sway bar.\u003c\/p\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1149-tomahawk-bumper-installation-instructions.pdf?v=1612534620\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":33020883337300,"sku":"MB1149","price":729.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb1149-view-1.jpg?v=1611958976"},{"product_id":"tomahawk-frame-chop-front-bumper-w-bull-bar-for-jeep-jk-jl-jt","title":"Tomahawk Frame Chop Front Bumper w\/Bull Bar for Jeep JK, JL, JT","description":"\u003cp\u003eFrame Chop Front Bumpers are nothing new to the offroad community.  Here at Motobilt we wanted to raise the bar a little.  The Tomahawk front bumper was designed from concepts developed on the TJ Front Half Frame Kit we manufacture. Are you ready to take your Jeep JK, JL or Gladiator to the next level of style, function and capability? \u003c\/p\u003e\r\n\u003cp\u003e\u003cbr\u003eThe Motobilt Tomahawk Front Winch Bumper offers many features for the avid off-roader.  This original \u0026amp; unique front frame chop bumper design features an upswept shape that gives you more clearance \u0026amp; increased approach angle than any other bumper \/ frame chop bumper available on the market. We integrated a second opening in the underside of the bumper which allows you to route your winch line directly downwards to suck down your front suspension, which in turn, lowers your center of gravity, increasing your vehicles' ability to climb steep obstacles. This concept is widely used in competitive rock crawling. \u003cbr\u003e\u003cbr\u003eCovering all Jeep Wrangler model years from 2007 through to current, this product fits all Jeep JK (2 door), JKU (4 door), JL (2 door), JLU (4 door) \u0026amp; Jeep JT Gladiator models. Permanent modification to \u0026amp; drilling of the frame is required. Slight clearancing of the two forwardmost body mounts is required prior to installation.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eA vacuum Pump Relocation Bracket is required on the Jeep JK \/ JKU 2012-2018 to install the Motobilt Tomahawk Frame Chop Bumper.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: You WILL NOT be able to return your vehicle back to factory bumpers after installation of this product.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eCheck out this video for all the details, install tips \u0026amp; more:\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=HwD17LrCp9w\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/thumbnail-website_600x600.jpg?v=1613061879\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eThis product ships as bare steel. For an even stronger connection, this product can also be welded to the factory frame.\u003cbr\u003e\u003cbr\u003eOur detailed installation instructions include color photos \u0026amp; step-by-step instructions to make your installation easy \u0026amp; fast.\u003c\/p\u003e\r\n\u003ch4\u003eFits:\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep Wrangler JK \/ JKU 2007-2018\u003c\/li\u003e\r\n\u003cli\u003eJeep Wrangler JL \/ JLU 2018-Current\u003c\/li\u003e\r\n\u003cli\u003eJeep Gladiator JT 2020-Current\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eJeep JK\/JKU Swaybar Compatibility:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eYou can reuse the factory swaybar, however, the Rubicon swaybar with the electronic disconnect IS NOT COMPATIBLE with this bumper. \u003cbr\u003e\u003cbr\u003eThis product is also compatible with the following Currie Antirock series swaybars:\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eOTHER Sway bar options from RockJock such as their Heavy Duty kits will fit as well!\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCE-9900JKF\u003c\/li\u003e\r\n\u003cli\u003eCE-9900JKFA\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eJeep JL\/JLU\/JT Gladiator Swaybar Compatibility:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eThe factory swaybar can be modified to fit this product, however, the Rubicon swaybar with the electronic disconnect IS NOT COMPATIBLE with this bumper. \u003cbr\u003e\u003cbr\u003eThis product is also compatible with the following Currie Antirock series swaybars:\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eOTHER Sway bar options from RockJock such as their Heavy Duty kits will fit as well!\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCE-9900JLF\u003c\/li\u003e\r\n\u003cli\u003eCE-9900JLFA\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWinch \u0026amp; Fairlead Compatibility:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cbr\u003eThe winch mounting pattern measures 10\" x 4.5\" \u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis product is designed to accept a variety of brand names \u0026amp; physical sizes of recovery winches, including the complete Warn Zeon, EVO product lines up to their largest Warn Zeon winch model, the Warn Zeon 12-S Platinum. \u003cstrong\u003eThis product IS NOT COMPATIBLE with the Warn MB8274 winch OR the CTI models. In fact, we recommend any offset winch NOT be used with the Tomahawk bumper. Yes the Badlands will fit this bumper.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eThe winch fairlead mounting pattern measures 10\" center-to-center of the holes. This product is compatible with most Hawse Fairleads. We do not recommend using a roller fairlead with the Tomahawk Frame Chop Front Bumper. \u003c\/p\u003e\r\n\u003cp\u003eWe cannot cover all winches and variations.  The bumper will fit other winches. One way of looking at it is if the larger Zeon 12k will fit a smaller M8000 would fin in the same place. We do have the winch mounting holes slotted to accommodate different shape winches. \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eShips raw steel.  Must be painted or powder coated to prevent rust. See (\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/blogs\/first-blog\/steel-it?_pos=3\u0026amp;_sid=d366c9466\u0026amp;_ss=r\" target=\"_blank\"\u003eSteel-It\u003c\/a\u003e)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003cspan\u003eCheck out \u003c\/span\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=HwD17LrCp9w\" target=\"_blank\"\u003ethis video\u003c\/a\u003e\u003cspan\u003e giving you all the features \u003c\/span\u003e\u003cem\u003eand\u003c\/em\u003e\u003cspan\u003e installation tips\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eHigh clearance upswept design\u003c\/li\u003e\r\n\u003cli\u003eIntegrated winch mount\u003c\/li\u003e\r\n\u003cli\u003eRecessed holes for winch mounting\u003c\/li\u003e\r\n\u003cli\u003eIntegrated fairlead mount\u003c\/li\u003e\r\n\u003cli\u003eTwo winch routes\u003c\/li\u003e\r\n\u003cli\u003eMultiple swaybar mounting options\u003c\/li\u003e\r\n\u003cli\u003eBolt on design (weld on optional)\u003c\/li\u003e\r\n\u003cli\u003eShips as bare steel\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight: 65lbs (approx.)\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eIncreased approach angle\u003c\/li\u003e\r\n\u003cli\u003eAccepts multiple winch sizes \u0026amp; brands\u003c\/li\u003e\r\n\u003cli\u003eWinch routing straight down to axle\u003c\/li\u003e\r\n\u003cli\u003eRecessed winch mounting bolts will not get damaged\u003c\/li\u003e\r\n\u003cli\u003eSwaybar compatible\u003c\/li\u003e\r\n\u003cli\u003eOptional Bull Bar guards winch\u003c\/li\u003e\r\n\u003cli\u003eFast \u0026amp; easy installation\u003c\/li\u003e\r\n\u003cli\u003eCan be color matched to your vehicle\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb1149_-_shipping.pdf?v=1663085219\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003ca class=\"btn\" href=\"\/products\/tomahawk-frame-chop-front-bumper-w-bull-bar-for-jeep-jk-jl-jt\" target=\"_blank\"\u003eWith Bull Bar Tube (MB1149-BB)\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eLight Bracket Mounts \u003ca href=\"https:\/\/motobilt.com\/products\/light-bracket-mounts-for-tomahawk-bumper\"\u003eMB2157\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eFairlead Light mount \u003ca href=\"https:\/\/motobilt.com\/products\/aluminum-universal-fairlead-light-mount-2\" rel=\"noopener\" target=\"_blank\"\u003eMB2154\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003cspan\u003eNOTES: If installing with no lift or just a small leveling kit there maybe slight rubbing if using the factory non rubicon sway bar.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1149-tomahawk-bumper-installation-instructions.pdf?v=1612534620\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":33026322137172,"sku":"MB1149-BB","price":839.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/products\/mb1149-b-view-1.jpg?v=1620397816"},{"product_id":"tomahawk-high-clearence-rear-bumper-for-jeep-jt","title":"Tomahawk High Clearance Rear Bumper for Jeep JT","description":"\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003eThe \u003c\/span\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eMotobilt MB1262 Tomahawk High Clearance Rear Bumper\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-preserver-spaces=\"true\"\u003e is engineered specifically for the \u003c\/span\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003e2020–current Jeep Gladiator JT\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-preserver-spaces=\"true\"\u003e, delivering unmatched departure angle \u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003eimprovement\u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003e and off-road performance.\u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003e Rocker protection is included to protect that vulnerable section of your bed between the wheel well and rear bumper. Designed to sit higher and tighter than the factory bumper, the Tomahawk provides \u003c\/span\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003ethe maximum available clearance possible for a factory bed \u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eand added protection for your rig on the trails.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003eBuilt in the USA from heavy-duty steel with recessed 3\/4-inch thick pass-through D-ring mounts, this Jeep Gladiator rear bumper combines superior strength, rock-solid recovery points, the ability to mount Baja Design S2 lights, and aggressive styling for serious off-roaders.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003ch3\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eBuilt Tough for your Gladiator\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eRemovable modular rocker protection included \u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-preserver-spaces=\"true\"\u003e- gives you flexibility for trail armor or a cleaner look.\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eMounting location for Baja Designs S2 lights \u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-preserver-spaces=\"true\"\u003e- add the Baja Designs or similar lights of your choice.\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eHeavy-Duty 3\/4-inch D-rings \u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-preserver-spaces=\"true\"\u003e-\u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003e built \u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003einto the bumper for optimal clearance without sacrificing function.\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eHitch Delete Skid Plate Included \u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-preserver-spaces=\"true\"\u003e- not looking to run a hitch receiver? The skid cover is included. Adds a smooth transition through the center of your bumper.\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003e8 Mounting Points \u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-preserver-spaces=\"true\"\u003e- get maximum support to your frame.\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eRetains Factory Trailer Wiring \u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-preserver-spaces=\"true\"\u003e- relocates your factory plugs for added clearance.\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003ca href=\"https:\/\/motobilt.com\/products\/receiver-hitch-for-full-length-jt-bed-replacement\"\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eOptional Motobilt Hitch (MB1186) \u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cspan data-preserver-spaces=\"true\"\u003e- 2-inch square, 1\/4-inch wall steel, bolts directly to the frame and bumper, with an integrated trailer wiring mount. Retains your factory receiver plug wiring. Does NOT work with factory hitch.\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eOptional License Plate Relocation Kit - \u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-preserver-spaces=\"true\"\u003ecoming soon.\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eEasy, Secure Installation\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\r\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003eThe Tomahawk requires trimming approximately \u003c\/span\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003e4 inches from the lower corners of the Gladiator bed\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-preserver-spaces=\"true\"\u003e for maximum clearance. The frame requires \u003c\/span\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eno cutting or drilling\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-preserver-spaces=\"true\"\u003e. The bumper secures with \u003c\/span\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003e8 mounting points\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-preserver-spaces=\"true\"\u003e for superior strength and rigidity.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003ch3\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eNotes:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eRequires trimming Gladiator bed corners (~4\"), no frame modifications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cspan data-preserver-spaces=\"true\"\u003eFits 2020–current Jeep Gladiator \u003c\/span\u003e\u003cspan data-preserver-spaces=\"true\"\u003eJT\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan data-preserver-spaces=\"true\"\u003eMade in the USA from heavy-duty steel\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eIncludes\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-preserver-spaces=\"true\"\u003e skid plate for non-hitch setups\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003e\u003cspan data-preserver-spaces=\"true\"\u003eIncludes\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-preserver-spaces=\"true\"\u003e trailer wiring plugs relocation bracket\u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan data-preserver-spaces=\"true\"\u003eModular rocker protection — removable as desired\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan data-preserver-spaces=\"true\"\u003eMounting locations for Baja Designs S2 lights (lights not included)\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan data-preserver-spaces=\"true\"\u003e\u003ca href=\"https:\/\/motobilt.com\/products\/receiver-hitch-for-full-length-jt-bed-replacement\"\u003eOptional MB1186 Hitch\u003c\/a\u003e (not included)\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan data-preserver-spaces=\"true\"\u003eOptional License Plate Relocation Kit (coming soon)\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1262_-_Shipping.pdf?v=1755725503\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1262_-_Assembly_Instructions.pdf?v=1755725504\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":42166000255060,"sku":"MB1262","price":1899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1262-Tomahawk-JT-Bumper-front-2.jpg?v=1755289249"},{"product_id":"high-clearence-front-fender-for-jeep-jk-jku","title":"Tomahawk Front Fenders for JK\/JKU","description":"\u003cp data-end=\"574\" data-start=\"315\"\u003eBring old-school flat-top attitude and unmatched clearance to your Jeep JK \/ JKU. The Tomahawk Front Fenders include cowl armor, and is a complete front-corner armor system—replacing your entire front quarter panel and factory fender with heavy-duty steel for extreme durability and maximum tire room.\u003c\/p\u003e\r\n\u003cp data-end=\"699\" data-start=\"576\"\u003eThe Tomahawk Front Fender delivers \u003cstrong data-end=\"698\" data-start=\"636\"\u003ethe most tire clearance of any JK\/JKU fender on the market\u003c\/strong\u003e:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli data-end=\"794\" data-start=\"703\"\u003e\r\n\u003cstrong data-end=\"733\" data-start=\"703\"\u003e+1.53\" of clearance gained\u003c\/strong\u003e along the lower rear section where tires traditionally rub\u003c\/li\u003e\r\n\u003cli data-end=\"855\" data-start=\"797\"\u003e\u003cstrong data-end=\"855\" data-start=\"797\"\u003e+3\" of vertical clearance above the factory flare line\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong data-end=\"855\" data-start=\"797\"\u003eFront stretch? \u003c\/strong\u003eNo problem, as these fenders are cut higher in the front by the grill for additional tire clearance\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eComplete Armor- \u003c\/strong\u003eCompletely replaces your entire front quarter panel and factory fender \u003cstrong\u003eINCLUDING\u003c\/strong\u003e the upper cowl armor and not just the flare.\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp data-end=\"969\" data-start=\"857\"\u003eThis extra clearance makes room for larger tires, less rubbing, better compression travel, and more confidence in technical terrain.\u003c\/p\u003e\r\n\u003cp data-end=\"1212\" data-start=\"971\"\u003eBuilt from 1\/8\" laser-cut steel, these fenders follow the straight-line, flat-top profile inspired by classic Jeep styling—modernized with Motobilt strength. Once installed, your entire front corner becomes armor, ready for real trail abuse.\u003c\/p\u003e\r\n\u003cp data-end=\"1330\" data-start=\"1214\"\u003eWhile installation is mostly bolt-on, \u003cstrong data-end=\"1275\" data-start=\"1252\"\u003ecutting is required\u003c\/strong\u003e to achieve the extreme clearance this system provides.\u003c\/p\u003e\r\n\u003cp data-end=\"1450\" data-start=\"1332\"\u003eThese fenders pair perfectly with MB1274 or MB1274-B inner fenders for a complete front-end upgrade that looks as good as it performs.\u003c\/p\u003e\r\n\u003cp data-end=\"1450\" data-start=\"1332\"\u003e \u003c\/p\u003e\r\n\u003chr data-end=\"1455\" data-start=\"1452\"\u003e\r\n\u003ch3 data-end=\"1475\" data-start=\"1457\"\u003e\u003cstrong data-end=\"1475\" data-start=\"1461\"\u003eHighlights\u003c\/strong\u003e\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli data-end=\"1495\" data-start=\"1478\"\u003eMade in the USA\u003c\/li\u003e\r\n\u003cli data-end=\"1523\" data-start=\"1498\"\u003eSteel Construction\u003c\/li\u003e\r\n\u003cli data-end=\"1557\" data-start=\"1526\"\u003eExtreme High Clearance Design\r\n\u003cul\u003e\r\n\u003cli data-end=\"1601\" data-start=\"1562\"\u003e\r\n\u003cstrong data-end=\"1577\" data-start=\"1562\"\u003e+1.53\" gain\u003c\/strong\u003e on lower rear section\u003c\/li\u003e\r\n\u003cli data-end=\"1645\" data-start=\"1606\"\u003e\r\n\u003cstrong data-end=\"1618\" data-start=\"1606\"\u003e+3\" gain\u003c\/strong\u003e above factory flare line\u003c\/li\u003e\r\n\u003cli data-end=\"1645\" data-start=\"1606\"\u003e\u003cstrong\u003eFront Stretch compatible\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-end=\"1696\" data-start=\"1648\"\u003eMost tire clearance available for the JK \/ JKU\u003c\/li\u003e\r\n\u003cli data-end=\"1696\" data-start=\"1648\"\u003e2\" wide flares for maximum clearance\u003c\/li\u003e\r\n\u003cli data-end=\"1772\" data-start=\"1699\"\u003eComplete replacement fender – transforms entire front corner into armor\u003c\/li\u003e\r\n\u003cli data-end=\"1772\" data-start=\"1699\"\u003e\r\n\u003cstrong\u003eINCLUDES: \u003c\/strong\u003eUpper cowl armor\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-end=\"1808\" data-start=\"1775\"\u003eUnique updated flat-top styling\u003c\/li\u003e\r\n\u003cli data-end=\"1833\" data-start=\"1811\"\u003eBolt-on installation (some cutting required)\u003c\/li\u003e\r\n\u003cli data-end=\"1880\" data-start=\"1836\"\u003eCutting required for maximum clearance\u003c\/li\u003e\r\n\u003cli data-end=\"1935\" data-start=\"1883\"\u003eShips raw steel (must be painted or powder coated)\u003c\/li\u003e\r\n\u003cli data-end=\"1954\" data-start=\"1938\"\u003eSold as a Pair\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003chr data-end=\"1959\" data-start=\"1956\"\u003e\r\n\u003ch3 data-end=\"2002\" data-start=\"1961\"\u003e\u003cstrong data-end=\"2002\" data-start=\"1965\"\u003eSuggested Parts \/ Compatible With\u003c\/strong\u003e\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli data-end=\"2042\" data-start=\"2005\"\u003e\u003cstrong data-end=\"2040\" data-start=\"2005\"\u003eMB1274 \/ MB1274-B Inner Fenders\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003chr data-end=\"2084\" data-start=\"2081\"\u003e\r\n\u003ch3 data-end=\"2108\" data-start=\"2086\"\u003e\u003cstrong data-end=\"2108\" data-start=\"2090\"\u003eNotes\u003c\/strong\u003e\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli data-end=\"2149\" data-start=\"2111\"\u003e\r\n\u003cstrong\u003eRequires Aftermarket Hood Latches \u003c\/strong\u003e- \u003cmeta charset=\"UTF-8\"\u003e \u003cspan\u003eFactory hood latch will NOT work and an aftermarket adjustable latch will be needed. \u003c\/span\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003chr\u003e\r\n\u003ch3 data-end=\"2108\" data-start=\"2086\"\u003e\u003cstrong data-end=\"2108\" data-start=\"2090\"\u003eSpecifications\u003c\/strong\u003e\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli data-end=\"2149\" data-start=\"2111\"\u003eDimensions (H\/W\/D): 6\" × 15\" × 56.3\"\u003c\/li\u003e\r\n\u003cli data-end=\"2170\" data-start=\"2152\"\u003eWeight: 70.8 lbs\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1273_-_Shipping_6e3b72a0-38b4-484c-bcc0-5a07be28767e.pdf?v=1764181049\" class=\"btn\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWhat's Included\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1273_-_Assembly_Instructions_ee86578e-fe6d-427c-a784-84a4cf81ca61.pdf?v=1764798302\" class=\"btn\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":42685941121108,"sku":"MB1273","price":1359.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1273.jpg?v=1769206637"},{"product_id":"inner-fender-for-high-clearance-fornt-fender-fits-jeep-jk-jku","title":"Tomahawk Inner Fender for JK\/JKU","description":"\u003cp data-start=\"333\" data-end=\"648\"\u003eFinish off your MB1273 Tomahawk Front Fender install with the Motobilt MB1274 Tomahawk Inner Fenders. These are designed specifically to work with the JK \/ JKU Tomahawk Front Fenders for the Jeep JK \/ JKU, providing a clean, protected, and high-clearance inner structure that matches the aggressive lines of the outer fenders. \u003cstrong\u003eDoes not work with factory fenders.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"650\" data-end=\"1112\"\u003ePrecision-cut from lightweight aluminum, each inner fender is formed for proper fitment and maximum tire size. The \u003cstrong data-start=\"763\" data-end=\"790\"\u003eMB1274 Standard Version\u003c\/strong\u003e includes all necessary cutouts and formed details for a direct, bolt-in installation. For builders running long-arm kits, coilovers, aftermarket shock towers, or other custom suspension configurations, the \u003cstrong data-start=\"997\" data-end=\"1023\"\u003eMB1274-B Blank Variant\u003c\/strong\u003e leaves out the pre-cut openings—allowing you to shape and trim them to your exact setup.\u003c\/p\u003e\n\u003cp data-start=\"1114\" data-end=\"1308\"\u003eWhether you’re keeping your JK \/ JKU close to factory geometry or pushing into a highly customized suspension system, these inner fenders deliver the clearance and protection your build demands.\u003c\/p\u003e\n\u003cp data-start=\"1310\" data-end=\"1325\"\u003e\u003cstrong data-start=\"1310\" data-end=\"1325\"\u003eHighlights:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1328\" data-end=\"1345\"\u003eMade in the USA\u003c\/li\u003e\n\u003cli data-start=\"1348\" data-end=\"1376\"\u003eAluminum Construction\u003c\/li\u003e\n\u003cli data-start=\"1379\" data-end=\"1415\"\u003eHigh-Clearance Inner Fender Design\u003c\/li\u003e\n\u003cli data-start=\"1379\" data-end=\"1415\"\u003ePerfect for those who have stretched the wheelbase forward\u003c\/li\u003e\n\u003cli data-start=\"1418\" data-end=\"1487\"\u003eDesigned specifically for MB1273 Tomahawk Front Fender for JK \/ JKU\u003c\/li\u003e\n\u003cli data-start=\"1490\" data-end=\"1526\"\u003e\n\u003cstrong data-start=\"1490\" data-end=\"1501\"\u003eMB1274:\u003c\/strong\u003e Pre-cut for direct fit\u003c\/li\u003e\n\u003cli data-start=\"1529\" data-end=\"1593\"\u003e\n\u003cstrong data-start=\"1529\" data-end=\"1542\"\u003eMB1274-B:\u003c\/strong\u003e Blank version for custom suspension applications\u003c\/li\u003e\n\u003cli data-start=\"1596\" data-end=\"1612\"\u003eSold as a Pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1614\" data-end=\"1636\"\u003e\u003cstrong data-start=\"1614\" data-end=\"1634\"\u003eCompatible With:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1639\" data-end=\"1686\"\u003e\u003cstrong data-start=\"1639\" data-end=\"1686\"\u003eMB1273 – Tomahawk Front Fender for JK \/ JKU. \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-start=\"1639\" data-end=\"1686\"\u003e\u003cstrong data-start=\"1639\" data-end=\"1686\"\u003e\u003cem\u003eNOTE\u003c\/em\u003e - Does not work with Factory Fenders\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1688\" data-end=\"1709\"\u003e\u003cstrong data-start=\"1688\" data-end=\"1707\"\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1712\" data-end=\"1754\"\u003eDimensions (H\/W\/D): 17.9\" × 42.8\" × 8.1\"\u003c\/li\u003e\n\u003cli data-start=\"1757\" data-end=\"1807\"\u003eWeight: 7 lbs (Standard) \/ 8.4 lbs (Blank Variant)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1274_-_Shipping.pdf?v=1763504588\" class=\"btn\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWhat's Included - MB1274\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1273_-_Shipping.pdf?v=1763503234\" class=\"btn\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWhat's Included - MB1274-B\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1274-B_-_Shipping.pdf?v=1763504588\" class=\"btn\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Standard","offer_id":42686628560980,"sku":"MB1274","price":349.0,"currency_code":"USD","in_stock":true},{"title":"Blank - for custom options","offer_id":42686628593748,"sku":"MB1274-B","price":349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1274-Square.jpg?v=1780927058"},{"product_id":"license-plate-relocation-bracket-for-jeep-jt","title":"License Plate Relocation Bracket for Jeep JT Gladiator","description":"\u003cp\u003e\u003cspan\u003eMB2207 – License Plate Relocation Bracket for Jeep Gladiator JT\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eWhen you install a high clearance rear bumper, the factory license plate location usually goes with it. The bumper gets tighter to the body, cleaner underneath, and the tag no longer has a place to live.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eThis bracket moves the plate where it makes sense.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eMounted to the lower driver side corner of the tailgate and bolting underneath the tailgate opening, it relocates the tag out of the bumper area while keeping it secure and visible. The rear of the truck stays clean, and you avoid hanging the plate off recovery points or drilling random holes just to get legal again.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eHigh clearance rear bumpers, including our Tomahawk, eliminate the factory mounting surface. This bracket provides a solid solution that looks intentional, not improvised.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eIt is designed specifically to work with the MB1262 Tomahawk Rear Bumper for the Jeep JT, but it can also be used with other aftermarket bumpers or custom applications where a new mounting location is needed.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eOnce installed, the plate sits tight against the tailgate corner and stays out of the way of departure angle and trail obstacles. It’s supported by steel structure and aluminum components that resist vibration and trail abuse without adding unnecessary bulk.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eIt does its job quietly. No rattling. No flex. No awkward placement.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003cspan\u003eConstructed from A36 steel and 5052 aluminum\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eDesigned for Jeep Gladiator JT\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eCompatible with MB1262 Tomahawk Rear Bumper\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eBolts on with factory hardware, NO drilling\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eDimensions: 6 inches high, 12 inches wide, 3 inches deep\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eWeight: 2.3 pounds\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eMade in the USA\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cspan\u003eNotes:\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003cspan\u003eMain frame structure is bare steel and will need to be painted.\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eWe recommend using LD-PL6 for the tag light.\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cspan\u003eThe bracket mounts to the lower driver side corner of the tailgate and secures underneath the tailgate opening. It is a straightforward bolt-on installation with basic hand tools. No complicated fabrication required.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eFor custom builds or other bumper configurations, the simple design allows flexibility in how and where it is used.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eWhen you clean up the rear of a Gladiator with a high clearance bumper, the small details matter. This bracket finishes the job the right way.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB2207_-_Shipping.pdf?v=1771860078\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB2207_-_Assembly_Instructions.pdf?v=1771860082\" class=\"btn\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":42732141183060,"sku":"MB2207","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/LICENSEPLATE-RELOCATION-BRACKET-JT.jpg?v=1764797062"},{"product_id":"rocker-armor-w-fender-for-jeep-jku","title":"Tomahawk Rocker Armor for Jeep JKU - Steel w\/ MB1273 Tomahawk Fenders","description":"\u003cp\u003e\u003cspan\u003eYou notice it when the doors shut and the body line runs clean from fender to corner. No gaps. No exposed edge waiting to catch a rock. The rocker finally looks like it belongs with the rest of the armor instead of stopping short.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eThe MB1273 Tomahawk front fender changes the front body line on a JKU. With the flare integrated into the fender, the original rocker length leaves space where there should be coverage. This revised version extends the front section to match that new profile so the armor works as a complete system.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eThe added front length closes the gap created by high clearance fenders and keeps the rocker protected from tire contact and trail damage. All other mounting points remain unchanged, so the rocker installs the same way and ties into the body just as securely as before. The result is continuous protection without reworking the rest of the Jeep.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003cspan\u003eRevised 4 door rocker guards for Jeep JKU\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eExtended front section to match MB1273 Tomahawk front fender profile\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eDesigned to integrate cleanly with Motobilt Tomahawk front fenders and corner armor. MB1273 ONLY!\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eMaintains original mounting hole locations\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eMounting holes match the original MB1014 rocker guards. If you are updating from the previous version, existing mounting points line up without modification. Installation follows the same process as the original design and does not require changes to the rest of the armor.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eWhen the body line is continuous and the protection carries through, the Jeep looks finished and stays protected where it matters. This revision makes the rocker work the way the rest of the build already does.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eThese ship bare steel and must be painted or powder coated. \u003c\/span\u003e\u003c\/p\u003e\r\n\u003ch4\u003eHighlights:\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMade in the USA\u003c\/li\u003e\r\n\u003cli\u003eA36 Steel\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eCompatibility:\u003c\/h4\u003e\r\n\u003cp\u003eMB1273\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e2008-2018 Jeep Wrangler JKU 4 Door\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications:\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDimensions (H\/W\/D): 9.4\" Max X 69.2\" Max x .2\" Max\u003c\/li\u003e\r\n\u003cli\u003eWeight (MB1014-F): 38.2 lbs\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1014-F_-_Shipping.pdf?v=1765983697\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":42762813571156,"sku":"MB1014-F","price":239.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1014-1.jpg?v=1765896032"},{"product_id":"aluminum-rocker-armor-w-fender-for-jeep-jku","title":"Tomahawk Rocker Armor for Jeep JKU - Aluminum w\/ MB1273 Tomahawk Fenders","description":"\u003cp\u003e\u003cspan\u003eYou notice it when the doors shut and the body line runs clean from fender to corner. No gaps. No exposed edge waiting to catch a rock. The rocker finally looks like it belongs with the rest of the armor instead of stopping short.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eThe MB1273 Tomahawk front fender and corner armor system changes the front body line on a JKU. With the flare integrated into the fender, the original rocker length leaves space where there should be coverage. This revised version extends the front section to match that new profile so the armor works as a complete system.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eThe added front length closes the gap created by Tomahawk front fenders and keeps the rocker protected from tire contact and trail damage. All other mounting points remain unchanged, so the rocker installs the same way and ties into the body just as securely as before. The result is continuous protection without reworking the rest of the Jeep.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003cspan\u003eRevised 4 door rocker guards for Jeep JKU\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eExtended front section to match MB1273 Tomahawk front fender profile\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eDesigned to integrate cleanly with Motobilt Tomahawk fenders and corner armor. MB1273 ONLY!\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eMaintains original mounting hole locations\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eMounting holes match the original MB1014 rocker guards. If you are updating from the previous version, existing mounting points line up without modification. Installation follows the same process as the original design and does not require changes to the rest of the armor.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eWhen the body line is continuous and the protection carries through, the Jeep looks finished and stays protected where it matters. This revision makes the rocker work the way the rest of the build already does.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003ch4\u003eHighlights:\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMade in the USA\u003c\/li\u003e\r\n\u003cli\u003e5052 Aluminum\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eCompatibility:\u003c\/h4\u003e\r\n\u003cp\u003eMB1273\u003c\/p\u003e\r\n\u003cp\u003eFits:\u003c\/p\u003e\r\n\u003cp\u003e2008-2018 Jeep Wrangler JKU 4 Door\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications:\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDimensions (H\/W\/D): 9.4\" Max X 69.2\" Max x .2\" Max\u003c\/li\u003e\r\n\u003cli\u003eWeight: MB1014-F-A 13.4 lbs\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1014-F-A_-_Shipping.pdf?v=1765983697\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":42762813767764,"sku":"MB1014-F-A","price":279.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb1014-a-view-1_327ec03b-1133-48df-ae8b-2fc24cc79759.jpg?v=1765896404"},{"product_id":"rocker-armor-w-fender-for-jeep-jk","title":"Tomahawk Rocker Armor for Jeep JK - Steel w\/ MB1273 Tomahawk Fenders","description":"\u003cp\u003e\u003cspan\u003eYou notice it when the doors shut and the body line runs clean from fender to corner. No gaps. No exposed edge waiting to catch a rock. The rocker finally looks like it belongs with the rest of the armor instead of stopping short.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eThe MB1273 Tomahawk front fender and corner armor system changes the front body line on a JK. With the flare integrated into the fender, the original rocker length leaves space where there should be coverage. This revised version extends the front section to match that new profile so the armor works as a complete system.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eThe added front length closes the gap created by Tomahawk front fenders and keeps the rocker protected from tire contact and trail damage. All other mounting points remain unchanged, so the rocker installs the same way and ties into the body just as securely as before. The result is continuous protection without reworking the rest of the Jeep.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003cspan\u003eRevised 2 door rocker guards for Jeep JK\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eExtended front section to match MB1273 Tomahawk front fender profile\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eDesigned to integrate cleanly with Motobilt Tomahawk front fenders and corner armor. MB1273 ONLY!\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eMaintains original mounting hole locations\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eMounting holes match the original MB1033 rocker guards. If you are updating from the previous version, existing mounting points line up without modification. Installation follows the same process as the original design and does not require changes to the rest of the armor.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eWhen the body line is continuous and the protection carries through, the Jeep looks finished and stays protected where it matters. This revision makes the rocker work the way the rest of the build already does.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eThese ship bare steel and must be painted or powder coated. \u003c\/span\u003e\u003c\/p\u003e\r\n\u003ch4\u003eHighlights:\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cspan style=\"text-decoration: underline;\"\u003eMade\u003c\/span\u003e in the USA\u003c\/li\u003e\r\n\u003cli\u003eA36 Steel\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eCompatibility:\u003c\/h4\u003e\r\n\u003cp\u003eMB1273\u003c\/p\u003e\r\n\u003cp\u003eFits:\u003c\/p\u003e\r\n\u003cp\u003e2008-2018 Jeep Wrangler JK 2 Door\u003c\/p\u003e\r\n\u003ch4\u003eDimensions\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDimensions H\/W\/D: 9.4\" Max X 51.5\" Max x .2\" Max\u003c\/li\u003e\r\n\u003cli\u003eWeight MB1033-F: 28 lbs\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1033-F_-_Shipping.pdf?v=1765983906\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":42762820550740,"sku":"MB1033-F","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb1033-jk-rockers.jpg?v=1765897396"},{"product_id":"aluminum-rocker-armor-w-fender-for-jeep-jk","title":"Tomahawk Rocker Armor for Jeep JK - Aluminum w\/ MB1273 Tomahawk Fenders","description":"\u003cp\u003e\u003cspan\u003eYou notice it when the doors shut and the body line runs clean from fender to corner. No gaps. No exposed edge waiting to catch a rock. The rocker finally looks like it belongs with the rest of the armor instead of stopping short.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eThe MB1273 Tomahawk front fender and corner armor system changes the front body line on a JK. With the flare integrated into the fender, the original rocker length leaves space where there should be coverage. This revised version extends the front section to match that new profile so the armor works as a complete system.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eThe added front length closes the gap created by Tomahawk front fenders and keeps the rocker protected from tire contact and trail damage. All other mounting points remain unchanged, so the rocker installs the same way and ties into the body just as securely as before. The result is continuous protection without reworking the rest of the Jeep.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003cspan\u003eRevised 2 door rocker guards for Jeep JK\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eExtended front section to match MB1273 Tomahawk front fender profile\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eDesigned to integrate cleanly with Motobilt Tomahawk front fenders and corner armor. MB1273 ONLY!\u003c\/span\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cspan\u003eMaintains original mounting hole locations\u003c\/span\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eMounting holes match the original MB1033 rocker guards. If you are updating from the previous version, existing mounting points line up without modification. Installation follows the same process as the original design and does not require changes to the rest of the armor.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eWhen the body line is continuous and the protection carries through, the Jeep looks finished and stays protected where it matters. This revision makes the rocker work the way the rest of the build already does.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003ch4\u003eHighlights:\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMade in the USA\u003c\/li\u003e\r\n\u003cli\u003e5052 Aluminum\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch4\u003eCompatibility:\u003c\/h4\u003e\r\n\u003cp\u003eMB1273\u003c\/p\u003e\r\n\u003cp\u003eFits:\u003c\/p\u003e\r\n\u003cp\u003e2008-2018 Jeep Wrangler JK 2 Door\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications:\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDimensions H\/W\/D: 9.4\" Max X 51.5\" Max x .2\" Max\u003c\/li\u003e\r\n\u003cli\u003eWeight MB1033-F: 10.5 lbs\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1033-F-A_-_Shipping.pdf?v=1767115812\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":42762825728084,"sku":"MB1033-F-A","price":239.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1033-A_85b806d0-25aa-4d49-a95c-c1bfb972c9fc.jpg?v=1765898687"},{"product_id":"jk-jku-front-half-kit","title":"Tomahawk Front Half Kit for Jeep JK \/ JKU","description":"\u003cp\u003eThere comes a point in a JK build where the factory front frame becomes the limiting factor.\u003c\/p\u003e\r\n\u003cp\u003eLow center of gravity setups, 05 and newer Super Duty axles, larger tires, and long travel coilovers all start competing for the same space. The MB3103 Front Half Kit replaces that compromise with structure that actually supports the direction the build is going.\u003c\/p\u003e\r\n\u003cp\u003eThis system moves the steering box forward 2 1\/8 inches and up 5\/8 inch. That upward movement corrects a common issue on low CG builds running 05 and newer Super Duty axles where the axle housing contacts the steering box at full compression. Instead of limiting up travel or raising ride height, the steering box is repositioned where it should have been from the beginning.\u003c\/p\u003e\r\n\u003cp\u003eThe kit allows for up to a 3 inch front stretch while retaining a steering box configuration. Custom steering and track bar solutions may be required depending on axle choice and overall suspension layout.\u003c\/p\u003e\r\n\u003cp\u003eWith room for up to a 3.0 16 inch coilover, the front of the Jeep is no longer forced to work around factory constraints. The structure supports long travel suspension while maintaining compatibility with JK 4 link systems.\u003c\/p\u003e\r\n\u003cp\u003eRockJock front sway bar fitment is integrated into the layout, and provisions are made for relocating ABS and electronics as required for a clean and functional install.\u003c\/p\u003e\r\n\u003cp\u003eThis is not just clearance. It is a structural reset of the front chassis.\u003c\/p\u003e\r\n\u003ch3\u003eImportant Information\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eWelding required. Front half components must be welded to the factory frame.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eShips bare steel. Parts must be prepped and painted or coated prior to final installation.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eRelocation of ABS and electronics is required.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eCustom steering and track bar solutions may be required depending on axle and stretch configuration.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eIntended for experienced fabricators.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eFits Jeep Wrangler JK and JKU\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eMoves steering box forward 2 1\/8 inches\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eRaises steering box 5\/8 inch\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eAllows up to 3 inch front stretch\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eSupports up to 3.0 inch body 16 inch travel coilovers\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eCompatible with PSC Big Bore steering box\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eFits RockJock Front Sway Bar RJ-236100-101\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eWorks with all JK 4 link kits\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eNotes\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eSteering and track bar modifications may vary depending on axle width and steering setup.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eFinal shock clearance depends on axle selection, wheel backspacing, and overall suspension geometry.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eFull mock up at ride height and full compression is recommended prior to final welding.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eSuper Duty axle configurations benefit from the steering box upward relocation for improved compression clearance.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":42948644405332,"sku":"MB3103","price":2349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB3103.jpg?v=1772036614"},{"product_id":"tomahawk-fuel-cell","title":"Tomahawk Rear Stretch Fuel Tank for Jeep JK","description":"\u003cp\u003eWhen you stretch the rear or rework the suspension on a JK, the factory fuel tank becomes the first obstacle.\u003c\/p\u003e\r\n\u003cp\u003eThe MB5099 Tomahawk Fuel Cell moves the fuel where it belongs on a serious build. With a 17.5 gallon capacity and a profile that hangs only 5.50 inches below the frame rails, it keeps the rear packaging tight without sacrificing usable fuel volume.\u003c\/p\u003e\r\n\u003cp\u003eDesigned to work with the factory frame or the MB1260 Tomahawk rear bumper, this cell integrates cleanly into builds that demand link clearance and improved departure angle. The compact design supports rear stretch applications and suspension layouts where the factory tank simply no longer fits.\u003c\/p\u003e\r\n\u003cp\u003eThis is not a universal drop in replacement. It is a purpose built solution for JK builds that have outgrown the factory layout.\u003c\/p\u003e\r\n\u003ch3\u003eImportant Information\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eDesigned for rear mounted fuel cell applications.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eMB5100 is required to access the fuel filler.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eWill not work with MB1081 rear bumper.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eProfessional installation recommended.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eProper fuel system plumbing and venting must be followed.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eFits Jeep Wrangler JK\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eCapacity: 17.5 gallons\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eHangs 5.50 inches below frame rails\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eCompatible with factory frame\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eCompatible with MB1260 Tomahawk rear bumper\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eRequires MB5100 for fuel filler access\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eNotes\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eNot compatible with MB1081 rear bumper.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eFinal ground clearance depends on suspension height and rear configuration.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eMay require fuel system modifications depending on overall build setup.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eCommonly used in rear stretch and custom suspension applications.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":42948645683284,"sku":"MB5099","price":1899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5099_Angled_View-square.jpg?v=1780925600"},{"product_id":"tomahawk-frame-chop-rear-bumper-for-jk-jku","title":"Tomahawk Frame Chop Rear Bumper for JK\/JKU","description":"\u003cp\u003eThere is a clear difference between bolting on a bumper and cutting the frame.\u003c\/p\u003e\r\n\u003cp\u003eThe MB1260 Tomahawk Frame Chop Rear Bumper is built for JK and JKU owners who are ready to commit to departure angle and rear clearance the right way. This system requires removing a portion of the factory frame and welding in a new mini frame rail that ties the body and frame together. Once installed, the rear of the Jeep sits tighter, cleaner, and far less vulnerable to hang ups.\u003c\/p\u003e\r\n\u003cp\u003eThe Tomahawk design pulls the bumper up and in, creating one of the most aggressive rear departure angles available for the JK platform. When the obstacle gets steep and the ledge drops away behind you, the rear of the Jeep no longer drags where the factory structure once did.\u003c\/p\u003e\r\n\u003cp\u003eRecessed D ring mounts are integrated into the bumper to keep recovery points strong without leaving hardware exposed. The smooth rear profile allows the Jeep to transition off obstacles instead of catching on protruding mounts.\u003c\/p\u003e\r\n\u003cp\u003eThis is not a cosmetic upgrade. It is a structural modification that changes how the rear of the Jeep performs on the trail.\u003c\/p\u003e\r\n\u003ch3\u003eImportant Information\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eRequires cutting a portion of the factory frame.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eWelding required to install new mini frame rail and body structure.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eShips bare steel and must be prepped and painted or coated prior to final installation.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eIntended for experienced fabricators or professional installation.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eFits Jeep Wrangler JK and JKU\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eFrame chop rear bumper design\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eIncludes welded mini frame rail\/body section\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eRecessed D ring mounts\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eHigh clearance profile for improved departure angle\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eSteel construction\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eNotes\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eCutting and welding permanently modifies the factory frame.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eFuel system, exhaust, and rear accessories may require modification depending on configuration.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eFinal departure angle and clearance will vary based on suspension height and tire size.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":42948681433172,"sku":"MB1260","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1260-square_df01f60b-159e-4ef4-aeea-8b1ffee8855d.jpg?v=1780692727"},{"product_id":"tomahawk-fuel-cell-access-hatch","title":"Tomahawk Fuel Tank Access Hatch for Jeep JK","description":"\u003cp\u003eWhen the fuel system moves, access needs to move with it.\u003c\/p\u003e\r\n\u003cp\u003eThe MB5100 Tomahawk Fuel Cell Access Hatch is designed specifically for use with the MB5099 Tomahawk Fuel Cell. It provides a clean, secure way to access the relocated filler without compromising the rear structure of the build.\u003c\/p\u003e\r\n\u003cp\u003eThe hatch features an access door with a lockable handle, keeping the filler protected while maintaining quick serviceability when needed. Whether the Jeep is on the trail or parked, the fuel system remains accessible and secure.\u003c\/p\u003e\r\n\u003cp\u003eThis piece completes the Tomahawk fuel cell setup the way it was intended to function.\u003c\/p\u003e\r\n\u003ch3\u003eImportant Information\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eRequired for use with MB5099 Micro Tomahawk Fuel Cell.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eDesigned specifically for Tomahawk fuel cell configuration.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eProfessional installation recommended.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eFits Jeep Wrangler JK applications using MB5099 fuel cell\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eLockable access door\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eIntegrated handle design\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eNotes\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eMust be used in conjunction with MB5099 Tomahawk Fuel Cell.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eFinal mounting location and configuration will depend on overall build layout.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":42948736974932,"sku":"MB5100","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB5100-square.jpg?v=1780926800"},{"product_id":"tomahawk-front-half-kit-with-bull-bar-for-jeep-jk-jku","title":"Tomahawk Front Half Kit with Bull Bar for Jeep JK \/ JKU","description":"\u003cp\u003eThere comes a point in a JK build where the factory front frame becomes the limiting factor.\u003c\/p\u003e\r\n\u003cp\u003eLow center of gravity setups, 05 and newer Super Duty axles, larger tires, and long travel coilovers all start competing for the same space. The MB3103 Front Half Kit replaces that compromise with structure that actually supports the direction the build is going.\u003c\/p\u003e\r\n\u003cp\u003eThis system moves the steering box forward 2 1\/8 inches and up 5\/8 inch. That upward movement corrects a common issue on low CG builds running 05 and newer Super Duty axles where the axle housing contacts the steering box at full compression. Instead of limiting up travel or raising ride height, the steering box is repositioned where it should have been from the beginning.\u003c\/p\u003e\r\n\u003cp\u003eThe kit allows for up to a 3 inch front stretch while retaining a steering box configuration. Custom steering and track bar solutions may be required depending on axle choice and overall suspension layout.\u003c\/p\u003e\r\n\u003cp\u003eWith room for up to a 3.0 16 inch coilover, the front of the Jeep is no longer forced to work around factory constraints. The structure supports long travel suspension while maintaining compatibility with JK 4 link systems.\u003c\/p\u003e\r\n\u003cp\u003eRockJock front sway bar fitment is integrated into the layout, and provisions are made for relocating ABS and electronics as required for a clean and functional install.\u003c\/p\u003e\r\n\u003cp\u003eThis is not just clearance. It is a structural reset of the front chassis.\u003c\/p\u003e\r\n\u003ch3\u003eImportant Information\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eWelding required. Front half components must be welded to the factory frame.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eShips bare steel. Parts must be prepped and painted or coated prior to final installation.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eRelocation of ABS and electronics is required.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eCustom steering and track bar solutions may be required depending on axle and stretch configuration.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eIntended for experienced fabricators.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eFits Jeep Wrangler JK and JKU\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eMoves steering box forward 2 1\/8 inches\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eRaises steering box 5\/8 inch\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eAllows up to 3 inch front stretch\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eSupports up to 3.0 inch body 16 inch travel coilovers\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eCompatible with PSC Big Bore steering box\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eFits RockJock Front Sway Bar RJ-236100-101\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eWorks with all JK 4 link kits\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eNotes\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eSteering and track bar modifications may vary depending on axle width and steering setup.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eFinal shock clearance depends on axle selection, wheel backspacing, and overall suspension geometry.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eFull mock up at ride height and full compression is recommended prior to final welding.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eSuper Duty axle configurations benefit from the steering box upward relocation for improved compression clearance.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":42950182994004,"sku":"MB3103-BB","price":2499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB3103-BB.jpg?v=1772040267"},{"product_id":"mb1279-f-stretch-rocker-armor-for-mb1273","title":"Tomahawk Stretch Rocker Armor for MB1273 - Jeep JK - Steel","description":"\u003cp data-end=\"5029\" data-start=\"4808\"\u003eAs builds move into larger tires and longer wheelbase setups, the factory rocker design becomes a limitation. Stretching the rear axle creates a gap behind the door and requires additional clearance for suspension travel.\u003c\/p\u003e\n\u003cp data-end=\"5188\" data-start=\"5031\"\u003eThe Tomahawk stretch rocker armor extends the rocker length to match the stretched wheelbase while matching the aggressive body lines of the Tomahawk system.\u003c\/p\u003e\n\u003cp data-end=\"5333\" data-start=\"5190\"\u003eDesigned to integrate with MB1273 front fenders and MB1138 stretch corner armor, this rocker creates a consistent body line from front to rear.\u003c\/p\u003e\n\u003ch2 data-end=\"5361\" data-start=\"5335\" data-section-id=\"9svvkf\"\u003eImportant Information\u003c\/h2\u003e\n\u003cul data-end=\"5520\" data-start=\"5363\"\u003e\n\u003cli data-end=\"5403\" data-start=\"5363\" data-section-id=\"gwa895\"\u003e\n\u003cp data-end=\"5403\" data-start=\"5365\"\u003eDesigned for Jeep Wrangler JK 2 Door\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"5440\" data-start=\"5404\" data-section-id=\"1i919py\"\u003e\n\u003cp data-end=\"5440\" data-start=\"5406\"\u003eConstructed from 3\/16 inch steel\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"5488\" data-start=\"5441\" data-section-id=\"1osca1e\"\u003e\n\u003cp data-end=\"5488\" data-start=\"5443\"\u003eDesigned for rear axle stretch applications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"5520\" data-start=\"5489\" data-section-id=\"1rrq9bc\"\u003e\n\u003cp data-end=\"5520\" data-start=\"5491\"\u003ePart of the Tomahawk system\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-end=\"5549\" data-start=\"5522\" data-section-id=\"1wc2bmo\"\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp data-end=\"5604\" data-start=\"5551\"\u003eVehicle Fitment\u003cbr data-end=\"5569\" data-start=\"5566\"\u003e2007-2018 Jeep Wrangler JK 2 Door\u003c\/p\u003e\n\u003cp data-end=\"5634\" data-start=\"5606\"\u003eMaterial\u003cbr data-end=\"5617\" data-start=\"5614\"\u003e3\/16 inch Steel\u003c\/p\u003e\n\u003cp data-end=\"5676\" data-start=\"5636\"\u003eMounting\u003cbr data-end=\"5647\" data-start=\"5644\"\u003eBody mounted using nutserts\u003c\/p\u003e\n\u003cp data-end=\"5710\" data-start=\"5678\"\u003eManufactured\u003cbr data-end=\"5693\" data-start=\"5690\"\u003eMade in the USA\u003c\/p\u003e\n\u003ch2 data-end=\"5735\" data-start=\"5712\" data-section-id=\"1hui92y\"\u003eInstallation Notes\u003c\/h2\u003e\n\u003cul data-end=\"5783\" data-start=\"5737\"\u003e\n\u003cli data-end=\"5783\" data-start=\"5737\" data-section-id=\"jzblwh\"\u003e\n\u003cp data-end=\"5783\" data-start=\"5739\"\u003eRequires drilling and nutsert installation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-end=\"5816\" data-start=\"5785\" data-section-id=\"xaletb\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp data-end=\"5963\" data-start=\"5818\"\u003e\u003cstrong data-end=\"5883\" data-start=\"5818\"\u003eWhat is the difference between standard stretch and Tomahawk stretch rockers?\u003c\/strong\u003e\u003cbr data-end=\"5886\" data-start=\"5883\"\u003eTomahawk rockers must be used when running MB1273 Tomahawk front fenders.\u003c\/p\u003e\n\u003cp data-start=\"2304\" data-end=\"2505\"\u003e\u003cstrong data-start=\"2304\" data-end=\"2358\"\u003eWhy do you need stretch rocker armor on a Jeep JK?\u003c\/strong\u003e\u003cbr data-start=\"2358\" data-end=\"2361\"\u003eStretching the rear axle creates a gap behind the rocker. This fills that gap and protects the body while keeping everything lined up correctly.\u003c\/p\u003e\n\u003cp data-start=\"2507\" data-end=\"2604\"\u003e\u003cstrong data-start=\"2507\" data-end=\"2551\"\u003eWill these work on a stock wheelbase JK?\u003c\/strong\u003e\u003cbr data-start=\"2551\" data-end=\"2554\"\u003eNo. These are designed for stretched applications.\u003c\/p\u003e\n\u003cp data-start=\"2606\" data-end=\"2680\"\u003e\u003cstrong data-start=\"2606\" data-end=\"2635\"\u003eDo these require welding?\u003c\/strong\u003e\u003cbr data-start=\"2635\" data-end=\"2638\"\u003eNo. These bolt to the body using nutserts.\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":44334156742740,"sku":"MB1279-F","price":219.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1279-F-square.jpg?v=1780923761"},{"product_id":"mb1279-f-a-stretch-rocker-armor-for-mb1273-aluminum","title":"Tomahawk Stretch Rocker Armor for MB1273 - Jeep JK - Aluminum","description":"\u003cp data-end=\"6609\" data-start=\"6377\"\u003eAs builds move into larger tires and longer wheelbase setups, the factory rocker design becomes a limitation. Stretching the rear axle creates a gap behind the door and requires additional clearance for suspension travel.\u003c\/p\u003e\n\u003cp data-end=\"6609\" data-start=\"6377\"\u003eThe Tomahawk stretch rocker armor extends the rocker length to match the stretched wheelbase while matching the aggressive body lines of the Tomahawk system.\u003c\/p\u003e\n\u003cp data-end=\"6609\" data-start=\"6377\"\u003eDesigned to integrate with MB1273 front fenders and MB1138 stretch corner armor, this rocker creates a consistent body line from front to rear.The aluminum Tomahawk stretch rocker armor extends the rocker to match a stretched wheelbase while reducing weight.\u003c\/p\u003e\n\u003ch2 data-end=\"6637\" data-start=\"6611\" data-section-id=\"9svvkf\"\u003eImportant Information\u003c\/h2\u003e\n\u003cul data-end=\"6767\" data-start=\"6639\"\u003e\n\u003cli data-end=\"6679\" data-start=\"6639\" data-section-id=\"gwa895\"\u003e\n\u003cp data-end=\"6679\" data-start=\"6641\"\u003eDesigned for Jeep Wrangler JK 2 Door\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"6719\" data-start=\"6680\" data-section-id=\"1brms9j\"\u003e\n\u003cp data-end=\"6719\" data-start=\"6682\"\u003eConstructed from 3\/16 inch aluminum\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"6767\" data-start=\"6720\" data-section-id=\"1osca1e\"\u003e\n\u003cp data-end=\"6767\" data-start=\"6722\"\u003eDesigned for rear axle stretch applications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-end=\"6796\" data-start=\"6769\" data-section-id=\"1wc2bmo\"\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp data-end=\"6851\" data-start=\"6798\"\u003eVehicle Fitment\u003cbr data-end=\"6816\" data-start=\"6813\"\u003e2007-2018 Jeep Wrangler JK 2 Door\u003c\/p\u003e\n\u003cp data-end=\"6884\" data-start=\"6853\"\u003eMaterial\u003cbr data-end=\"6864\" data-start=\"6861\"\u003e3\/16 inch Aluminum\u003c\/p\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDimensions H\/W\/D: 20.8\" x 12.19\" x 40.28\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWeight: 7.25 lbs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-end=\"6926\" data-start=\"6886\"\u003eMounting\u003cbr data-end=\"6897\" data-start=\"6894\"\u003eBody mounted using nutserts\u003c\/p\u003e\n\u003cp data-end=\"6960\" data-start=\"6928\"\u003eManufactured\u003cbr data-end=\"6943\" data-start=\"6940\"\u003eMade in the USA\u003c\/p\u003e\n\u003ch2 data-end=\"6985\" data-start=\"6962\" data-section-id=\"1hui92y\"\u003eInstallation Notes\u003c\/h2\u003e\n\u003cul data-end=\"7033\" data-start=\"6987\"\u003e\n\u003cli data-end=\"7033\" data-start=\"6987\" data-section-id=\"jzblwh\"\u003e\n\u003cp data-end=\"7033\" data-start=\"6989\"\u003eRequires drilling and nutsert installation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-end=\"7066\" data-start=\"7035\" data-section-id=\"xaletb\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp data-end=\"7166\" data-start=\"7068\"\u003e\u003cstrong data-end=\"7109\" data-start=\"7068\"\u003eWhy choose aluminum Tomahawk rockers?\u003c\/strong\u003e\u003cbr data-end=\"7112\" data-start=\"7109\"\u003eThey reduce weight and must be used when running Tomahawk front fenders MB1273\u003c\/p\u003e\n\u003cp data-start=\"2304\" data-end=\"2505\"\u003e\u003cstrong data-start=\"2304\" data-end=\"2358\"\u003eWhy do you need stretch rocker armor on a Jeep JK?\u003c\/strong\u003e\u003cbr data-start=\"2358\" data-end=\"2361\"\u003eStretching the rear axle creates a gap behind the rocker. This fills that gap and protects the body while keeping everything lined up correctly.\u003c\/p\u003e\n\u003cp data-start=\"2507\" data-end=\"2604\"\u003e\u003cstrong data-start=\"2507\" data-end=\"2551\"\u003eWill these work on a stock wheelbase JK?\u003c\/strong\u003e\u003cbr data-start=\"2551\" data-end=\"2554\"\u003eNo. These are designed for stretched applications.\u003c\/p\u003e\n\u003cp data-start=\"2606\" data-end=\"2680\"\u003e\u003cstrong data-start=\"2606\" data-end=\"2635\"\u003eDo these require welding?\u003c\/strong\u003e\u003cbr data-start=\"2635\" data-end=\"2638\"\u003eNo. These bolt to the body using nutserts.\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":44334195179604,"sku":"MB1279-F-A","price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1279-F-A-square.jpg?v=1780694552"},{"product_id":"mb1271-rear-flare-for-stretch","title":"Rear Stretch 2\" Flare - Jeep JK for MB1138","description":"\u003cp data-start=\"274\" data-end=\"553\"\u003eOnce you stretch the rear of a Jeep JK 2 door and move into larger tire sizes, the factory flare no longer lines up with the new wheel opening. Even after installing stretch corner armor, the outer edge of the body can still look incomplete without a flare to finish the profile.\u003c\/p\u003e\n\u003cp data-start=\"555\" data-end=\"810\"\u003eThe Motobilt rear stretch 2 inch flare is designed to complete that setup. It bolts directly to MB1138 and MB1138-T  stretch corner armor and follows the new wheel opening that has been moved rearward to match the stretched axle position.\u003c\/p\u003e\n\u003cp data-start=\"812\" data-end=\"1044\"\u003eThis flare adds 2 inches of coverage while maintaining the aggressive body lines of the Tomahawk system. It helps keep the tire tucked within the body line while also protecting the outer edge of the corner armor from trail contact.\u003c\/p\u003e\n\u003cp data-start=\"1046\" data-end=\"1315\"\u003eConstructed from 3\/16 inch steel, this flare is built to handle real off-road use and integrates cleanly with the corner armor. It is not a standalone part. It is designed specifically to work with the Tomahawk stretch corners as part of a complete rear stretch system.\u003c\/p\u003e\n\u003cp data-start=\"1317\" data-end=\"1520\"\u003eWhen combined with MB1138 or MB1138-T corner armor, stretch rocker armor, and frame mounted sliders, this flare helps complete the rear of the vehicle so everything lines up correctly from front to back.\u003c\/p\u003e\n\u003ch2\u003eImportant Information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eDesigned for Jeep Wrangler JK 2 Door\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConstructed from 3\/16 inch steel\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e2 inch flare\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDesigned for stretch applications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"y32lyu\" data-start=\"1704\" data-end=\"1775\"\u003e\n\u003cp data-start=\"1706\" data-end=\"1775\"\u003eBolts directly to MB1138 and MB1138-T Tomahawk stretch corner armor\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"13ddfze\" data-start=\"1776\" data-end=\"1816\"\u003e\n\u003cp data-start=\"1778\" data-end=\"1816\"\u003eFollows relocated rear wheel opening\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"97gjva\" data-start=\"1817\" data-end=\"1854\"\u003e\n\u003cp data-start=\"1819\" data-end=\"1854\"\u003eAdds tire coverage and protection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"f62ztu\" data-start=\"1855\" data-end=\"1906\"\u003e\n\u003cp data-start=\"1857\" data-end=\"1906\"\u003eNot designed for use with factory corner panels\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cp\u003eVehicle Fitment\u003cbr\u003e2007-2018 Jeep Wrangler JK 2 Door\u003c\/p\u003e\n\u003cp\u003eMaterial\u003cbr\u003e3\/16 inch Steel\u003c\/p\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDimensions H\/W\/D: \u003c\/span\u003e\u003cspan\u003e12.2\u003c\/span\u003e\u003cspan\u003e\" x \u003c\/span\u003e\u003cspan\u003e6.5\u003c\/span\u003e\u003cspan\u003e\" x \u003c\/span\u003e\u003cspan\u003e41.4\u003c\/span\u003e\u003cspan\u003e\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWeight: \u003c\/span\u003e\u003cspan\u003e28.75\u003c\/span\u003e\u003cspan\u003e lbs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eMounting\u003cbr\u003eBolts to corner armor\u003c\/p\u003e\n\u003cp\u003eManufactured\u003cbr\u003eMade in the USA\u003c\/p\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRequires MB1138 or MB1138-T corner armor for installation\u003c\/li\u003e\n\u003cli data-section-id=\"c7h912\" data-start=\"2206\" data-end=\"2268\"\u003e\n\u003cp data-start=\"2208\" data-end=\"2268\"\u003eTest fit flare with corner armor before final installation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"buppo8\" data-start=\"2269\" data-end=\"2315\"\u003e\n\u003cp data-start=\"2271\" data-end=\"2315\"\u003eDesigned to follow stretched wheel opening\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"41w0x5\" data-start=\"2316\" data-end=\"2374\"\u003e\n\u003cp data-start=\"2318\" data-end=\"2374\"\u003eEnsure proper tire clearance at full suspension travel\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-section-id=\"xaletb\" data-start=\"2381\" data-end=\"2412\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp data-start=\"2414\" data-end=\"2588\"\u003e\u003cstrong data-start=\"2414\" data-end=\"2465\"\u003eWhat does this rear flare do on a stretched JK?\u003c\/strong\u003e\u003cbr data-start=\"2465\" data-end=\"2468\"\u003eIt adds coverage over the tire and completes the body line after the wheel opening has been moved back during a stretch.\u003c\/p\u003e\n\u003chr data-start=\"2590\" data-end=\"2593\"\u003e\n\u003cp data-start=\"2595\" data-end=\"2739\"\u003e\u003cstrong data-start=\"2595\" data-end=\"2640\"\u003eWill this work with factory Jeep corners?\u003c\/strong\u003e\u003cbr data-start=\"2640\" data-end=\"2643\"\u003eNo. This flare is designed to bolt directly to MB1138 or MB1138-T Tomahawk stretch corner armor.\u003c\/p\u003e\n\u003chr data-start=\"2741\" data-end=\"2744\"\u003e\n\u003cp data-start=\"2746\" data-end=\"2844\"\u003e\u003cstrong data-start=\"2746\" data-end=\"2773\"\u003eHow wide is this flare?\u003c\/strong\u003e\u003cbr data-start=\"2773\" data-end=\"2776\"\u003eThis is a 2 inch flare designed to provide additional tire coverage.\u003c\/p\u003e\n\u003chr data-start=\"2846\" data-end=\"2849\"\u003e\n\u003cp data-start=\"2851\" data-end=\"3007\"\u003e\u003cstrong data-start=\"2851\" data-end=\"2909\"\u003eDo I need this if I already have stretch corner armor?\u003c\/strong\u003e\u003cbr data-start=\"2909\" data-end=\"2912\"\u003eIf you want additional tire coverage and a finished outer edge, this flare completes the setup.\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":44334382973012,"sku":"MB1271","price":549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1271-square.jpg?v=1780693999"}],"url":"https:\/\/motobilt.com\/collections\/tomahawk-series.oembed","provider":"Motobilt","version":"1.0","type":"link"}