{"product_id":"adjustable-front-seat-mounts-for-jeep-jk-jku","title":"Adjustable Front Seat Mounts for Jeep JK \/ JKU","description":"\u003cp data-pm-slice=\"1 1 []\"\u003e\u003cspan\u003eInstalling aftermarket suspension seats in a Jeep JK or JKU can create problems with seating height, legroom, and interior clearance. Many suspension seats sit taller than factory seats, and adding mounting brackets and sliders can push the seating position even higher. This becomes especially noticeable in Jeeps equipped with aftermarket roll cages, where headroom and proper driver positioning are important. The Motobilt MB2246 Adjustable Front Seat Mounts give builders control over both seat height and fore\/aft positioning when installing aftermarket suspension seats.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned for 2012–2018 Jeep Wrangler JK and JKU models, the MB2246 includes driver and passenger seat mounts, seat sliders, and two sets of interchangeable seat risers. With no risers installed, the mounting system positions the seat up to 2.25\" lower than the factory mounting height. Builders can install the included 1.25\" or 2\" risers to raise the seat from its lowest mounting position, allowing them to dial in seating height based on driver preference, headroom, and interior clearance. This gives builders three mounting height configurations without having to fabricate additional spacers or brackets.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEach seat mount features three mounting positions for the included seat slider. The center position maintains the factory fore\/aft mounting location, while the forward position moves the slider 3\/4\" forward and the rear position moves it 3\/4\" backward for additional legroom. The included sliders provide normal seat adjustment after the mounting position has been selected.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe MB2246 is designed for aftermarket suspension seats with vertical mounting tabs underneath the seat, including PRP-style seats using an 18\" front-to-rear mounting hole spacing and 14\" inside mounting width. Other aftermarket seat manufacturers may also be compatible when their mounting tabs match these dimensions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eConstructed from A36 steel, the brackets also feature separate accent panels positioned behind the Motobilt M logos. These panels can be painted or powder coated in a contrasting color to customize the appearance of the seat mounts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDesigned and manufactured by Motobilt in Ozark, Alabama, the MB2246 provides a practical mounting system for builders upgrading the seats and interior layout of their Jeep JK or JKU.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cspan\u003eImportant Information\u003c\/span\u003e\u003c\/h1\u003e\n\u003cul data-spread=\"false\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eFits 2012–2018 Jeep Wrangler JK 2-door\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eFits 2012–2018 Jeep Wrangler JKU 4-door\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eSold as a pair, driver and passenger seat mounts included\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eDesigned for aftermarket suspension-style seats with vertical mounting tabs\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eCompatible with PRP-style suspension seats using the specified mounting dimensions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eRequires 18\" front-to-rear mounting hole spacing\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eRequires 14\" inside width between the vertical mounting tabs\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eOther aftermarket seat brands may fit when their mounting dimensions and tab configuration match\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eDoes not work with factory Jeep JK\/JKU seats\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eDoes not work with factory Jeep JK\/JKU seat sliders\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eIncludes aftermarket seat sliders for both front seats\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eIncludes removable seat risers\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eRetains factory seat mounting height when using the supplied risers\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eAllows up to 2 1\/4\" lower seat mounting position with risers removed\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eThree fore\/aft seat slider mounting positions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eCenter position maintains the factory fore\/aft mounting location\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eForward mounting position moves the slider 3\/4\" forward\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eRear mounting position moves the slider 3\/4\" rearward\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eSeparate Motobilt M logo accent panels can be finished in a contrasting color\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eConstructed from A36 steel\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eIncludes 5\/16\"-18 x 1\" Grade 5 zinc-plated carriage bolt fasteners\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eMade in the USA\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003cspan\u003eProduct Specifications\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003ePart Number:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e MB2246\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eProduct Type:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Adjustable Front Suspension Seat Mount Kit\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eVehicle Fitment:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e2012–2018 Jeep Wrangler JK 2-door\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2012–2018 Jeep Wrangler JKU 4-door\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eApplication:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Aftermarket front suspension seat installation\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eMaterial:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e A36 Steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eSeat Compatibility:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Aftermarket suspension seats with compatible vertical mounting tabs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eSeat Mounting Hole Spacing:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e 18\" front to rear\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eSeat Mounting Width:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e 14\" inside width between vertical mounting tabs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eFactory Seat Compatibility:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Not compatible\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eFactory Seat Slider Compatibility:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Not compatible\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eSeat Sliders:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Included for driver and passenger seats\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eSeat Risers:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Included, removable\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eSeat Height Adjustment:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Factory mounting height with risers installed, or up to 2 1\/4\" lower with risers removed\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eFore\/Aft Slider Mounting Positions:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Three\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eForward Mounting Adjustment:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e 3\/4\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eRearward Mounting Adjustment:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e 3\/4\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eAccent Panels:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Separate panels positioned behind the Motobilt M logos for custom finishing\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eFastener Specification:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e 5\/16\"-18 x 1\" Grade 5 zinc-plated carriage bolts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eQuantity:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Pair, driver and passenger side\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eDimensions (H\/W\/D):\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e 15\" x 16\" x 26\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eWeight:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e 49.1 lbs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eManufactured:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Made in the USA\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eRelated Motobilt Product:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/motobilt.com\/products\/front-seat-mounts-for-jlu\"\u003e\u003cspan\u003eFront Seat Mounts for Jeep JLU\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cspan\u003eInstallation Notes\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eThe MB2246 replaces the factory front seat mounting arrangement when installing compatible aftermarket suspension seats in a 2012–2018 Jeep Wrangler JK or JKU.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eSeat Compatibility and Mounting Dimensions\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBefore installation, verify that the aftermarket seats use vertical mounting tabs underneath the seat. The required mounting configuration is 18\" between the front and rear mounting holes and 14\" inside width between the mounting tabs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese dimensions are commonly associated with PRP-style suspension seat mounting arrangements. Other aftermarket seats may work if their vertical mounting tabs match the required dimensions. Seats with different mounting patterns or flat-bottom mounting arrangements may require a different mounting system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFactory Jeep JK\/JKU seats and factory seat sliders are not compatible with MB2246.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eSeat Height Adjustment\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe supplied seat risers provide two mounting height configurations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInstall the risers to retain the factory seat mounting height. Remove the risers to lower the seat mounting position up to 2 1\/4\".\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eActual occupant seating height depends on the design and thickness of the aftermarket suspension seat.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eFore\/Aft Seat Position Adjustment\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEach bracket includes three mounting positions for the supplied seat slider.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe center mounting position maintains the factory fore\/aft slider mounting location. The forward mounting position moves the slider 3\/4\" toward the front of the Jeep. The rear mounting position moves the slider 3\/4\" toward the rear of the Jeep, providing additional legroom.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese mounting positions establish the location of the seat slider assembly. The included sliders provide additional adjustment during normal use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eCustomizable Logo Accent Panels\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Motobilt M logo accent panels are separate components that can be finished independently from the main seat brackets.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBuilders can paint or powder coat the panels in a contrasting color to highlight the Motobilt M logo and coordinate with the Jeep's interior, cage, or other fabricated components.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFinish the accent panels separately before final assembly when using contrasting colors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eFinal Installation Checks\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTest fit both seats before final assembly. Verify steering wheel clearance, center console clearance, door clearance, roll cage clearance, and full seat slider travel.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eConfirm that all seat mounting hardware is installed correctly and securely tightened. Any vehicle-specific seat belt, buckle, or electrical system requirements must be addressed as part of the installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cspan\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eWill the MB2246 seat mounts work with factory Jeep JK or JKU seats?\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNo. The MB2246 is specifically designed for aftermarket suspension seats with vertical mounting tabs underneath the seat. Factory Jeep JK\/JKU seats and factory seat sliders are not compatible. The kit includes its own seat sliders for both the driver and passenger seats.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eWhat aftermarket suspension seats fit the MB2246 seat mounts?\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe MB2246 is designed around PRP-style suspension seats with vertical mounting tabs. The required mounting dimensions are 18\" between the front and rear mounting holes and 14\" inside width between the mounting tabs. Other manufacturers may also be compatible if their seats use the same mounting dimensions and vertical tab arrangement. Builders should verify these measurements before ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eHow much lower can I mount my seats with MB2246?\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRemoving the included seat risers allows the mounting position to be lowered up to 2 1\/4\" compared with the configuration using the risers. Keeping the risers installed allows the factory seat mounting height to be retained. Actual headroom and occupant seating height depend on the aftermarket seat being installed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eCan I move the seat farther back for more legroom?\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYes. The MB2246 provides three seat slider mounting positions. The rear mounting position moves the slider 3\/4\" farther back than the center position. The forward position moves it 3\/4\" forward. The included seat sliders provide additional fore\/aft adjustment after installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eCan I customize the color of the Motobilt M logo on the seat brackets?\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYes. The MB2246 features separate accent panels positioned behind the Motobilt M logos. These panels can be painted or powder coated in a contrasting color before assembly, allowing the logo to stand out and match the interior or other components in the Jeep.\u003c\/span\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":47835689582676,"sku":"MB2246","price":379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/Motobilt-MB2246-JKU-front-seat-mounts-03-assembled-right-oblique.jpg?v=1794610374","url":"https:\/\/motobilt.com\/products\/adjustable-front-seat-mounts-for-jeep-jk-jku","provider":"Motobilt","version":"1.0","type":"link"}