15 Gallon Fuel Cell for Jeep TJ/LJ Fuel Pump Package
(Sale price shown in cart/checkout)
SKU : MB5005-TJ-3000-5007
UPC Code: 686728655779
Vendor : Motobilt
Collections : Aluminum Products, Behind the Seat Mount Fuel Cells, Best selling products, Best Selling Products, Fuel Cells & Parts, Jeep TJ 97-06, Motobilt, Parts $501 - $1000, Products, Top Sellers,
The Motobilt Jeep TJ/LJ fuel cell package was designed to mount in the bed of your Jeep TJ or LJ. It will use your factory Jeep TJ or LJ fuel pump and is made out of 1/8 inch aluminum that is TIG welded. Motobilt offers a solution for relocating the fuel tank in your Jeep TJ. The Motobilt MB5005-TJ was designed to use the stock Jeep TJ fuel pump and designed to fit in the back bed of your Jeep. (See Notes) It is 30 inch x 12 inch x 9 inch and can fit behind your seat if you choose too. The tank has a capacity of roughly 15 US gallons. The Motobilt fuel tank is CNC cut from 1/8 inch aluminum and formed on a press brake, is TIG welded for ultimate strength and includes a large D-ring style cap. This can be converted to remote fill by purchasing a different filler neck system that utilizes a 12 bolt, 5.38 bolt circle flange. The Motobilt MB3000 fuel cell mount and MB5007 fuel pump clamping ring are included.
The mount consists of three parts: the main under tank plate and two clamp bodies. The under tank plate is CNC Laser Cut from 1/8 inch high strength steel plate. You can weld your own mounting brackets to the bottom if needed or utilize the 8 bolt holes already in the mount. The 2 clamp down bodies capture the top and all four sides of the tank and bolt securely to the mounting base. These parts are CNC Laser Cut but from 16 gauge steel. The parts are formed on a hydraulic press break. This mount will ensure your fuel cell is mounted securely. The Motobilt tank features one fitting on top of the tank which has a roll over valve for a vent line. The MB5005-TJ Fuel Cell already has the provisions for the clamping ring cnc cut into the tank. This means the clamping ring and pump will bolt in with no cutting or drilling necessary!
This fuel cell is used for applications where you are extending the wheel base and the rear axle would contact the factory fuel tank. It would also be used in situations where more ground clearance is needed. This kit works perfectly with the Motobilt Jeep TJ Back Half kit or Motobilt Jeep LJ back half kit, where the frame rails are moved up and in for ultimate clearance.
- Jeep TJ/LJ aluminum fuel cell
- MB3000 Fuel Cell Mount
- MB50007 TJ fuel pump clamping ring
- 30 inch x 12 inch x 9 inch
- 15 US gallons capacity
- Brass roll over valve with 90 degree barbed fitting used for vent line.
- -8 AN fitting used for return line on 2004-2006. Earlier models will simply cap off this fitting.
- CNC cut from 1/8 inch aluminum
- Press brake formed
- Includes a large D-ring style cap
- Under tank plate is CNC Laser Cut from 1/8 inch high strength steel plate
- Sold as kit
- Weight = 44lbs
- This Fuel Cell Does Not mount in between the frame rails. It will only mount inside the bed of the Jeep
- We recommend using Permatex 80016 Form-A-Gasket number 2 Sealant to seal the contact surfaces. This is a sealant we have used in the shop numerous times over the years for sealing filler caps on fuel cells.
- The fuel filler cap assembly gasket can deteriorate due to ethanol. We recommend using the same Permatex 80016 Form-A-Gasket number 2 Sealant here also.
- 2006 TJ fuel pump requires the factory plastic to be slightly trimmed to fit the clamping ring.
- 2005 & 2006 TJ's may require the seat to be remounted / moved in order to clear this fuel cell.
FOR OFF-ROAD USE ONLY.