Shock Mounts

Products found here are for mounting standard shocks as well as coil over shocks and bypass shocks.

Shock Mounts

The Motobilt shock mount brackets are formed and laser cut to fit a 3 inch axle tube diameter but can easily be fitted to a smaller or larger axle tube diameter. These mounts are sold as a pair and are made out of 3/16 inch plate steel. The mounting hole...
The Motobilt Jeep YJ front shock towers are laser cut from 3/16 inch steel plate and cnc bent in house at Motobilt. These are 100 percent made in America. The Motobilt towers are meant to replace the stock shock buckets on your 1987-1995 Jeep Wrangler YJ. The towers come as...
The Motobilt Coilover Shock Hoops are made of HD 1.75 inch .120wall DOM Tubing. They are the perfect way to mount coilovers, air shocks, etc. This kit is designed to be used with the Motobilt Coilover Shock Hoop Brace (#MB1557) but can be used separately.  Its larger opening also works...
The Coilover shock tab for 1.75 inch round tube is cnc laser cut from 1/4 inch high strength steel plate. The bolt hole is 1/2 inch diameter to fit the standard coilover shock bolt size. The area around the bolt hole has clearance to allow room for the shock body...
The Motobilt rear fender top mounted coil over mounts are integrated into the CJ/YJ rear fender tops. The mounts allow you to run a rear coilover that will tie into the fender tops and the roll cage. These mounts come with the roll cage upper mounting plate so that you...
This innovative Motobilt Builder Kit has numerous benefits for the DIY'er at home or for the professional vehicle builder. Front upper shock towers are needed when converting a vehicle from factory springs & traditional shocks to longer full coil-over shocks. Anyone can fabricate a simple tube to brace between the...
The Motobilt lower coil over mounts for the side of the axle are built to take some serious abuse. These mounts have a set of built in spacers that will work with 2 inch coilovers. The brackets come as a pair and will need to be welded together for install....
The Super Duty Dana 60 inner C coil over shock bracket set is manufactured from laser cut and formed 1/4" steel plate. The inner C shock mounts are designed for 2.0 coil over shocks. The shock mounts fit the 2005+ Dana 60 Super Duty Axle inner C.. Simply bolt on to...
Product Details The Motobilt shock towers are made out of thick 1/4 inch p and o steel plate that is CNC cut and bent. These towers have a notch cut into them so that you can sit them on top of your frame rail and weld them in place. The lean...
The Motobilt Flat Mounting Coilover Tab can be used in a number of applications. The tab is CNC laser cut from 1/4 inch high strength steel plate. The tab measures 3.25 inch wide at the flat bottom base; The 1/2 inch hole is 1.5 inch up from the flat bottom...
Coilover mounting tab for Dana 60 front kingpin style axle housings. Mounting coilover shocks to a Dana 60 front kingpin style axle has a couple challenges and the Motobilt MB2006 tab answers them. The tab is contoured on the bottom edge (weld surface) to follow the axle tube and contour...
Precision laser cut from 3/16" high grade steel, this universal axle shock tab is a quick solution for mounting shocks directly to any axle.The hole is 1/2" diameter. The lower portion of the tab is perfectly cut to fit a 3" diameter axle tube & can be ground to fit...
Spinner