Suspension Systems

We do not offer traditional suspension lift kits like some other companies.  The following parts are suspension products used to stretch your wheelbase, install a one ton axle and builder related suspension parts.  You can also find other parts to custom fabrication your 4 link suspension under the Builder Parts section of the website.

Suspension Systems

The Motobilt Jeep CJ full width axle conversion kit is a simple way to install a Chevy Dana 44 or Dana 60 front axle in your Jeep CJ. This kit also works with older model Ford 44 and 60 fronts from the 78/79 range. This kit fits Jeep CJ's from...
The Motobilt frame mount spring hangers are a great way to move your spring mounts on your frame. They are designed to fit around your factory frame rails and weld in place. These mounts can be used to replace factory mounts or to relocate your leaf springs. They are 2.5...
The Motobilt Boomerang Shackle plates are sold as a pair.  They measure 4"s long from the center of hole to center of hole. The hole diameter is 1/2" for all three holes.  Specifications 3/8" thick laser cut steel plate Sold as pair Note Ships raw steel
The Motobilt Jeep YJ front shock towers are laser cut from 3/16 inch steel plate and cnc bent in house at Motobilt. These are 100 percent made in America. The Motobilt towers are meant to replace the stock shock buckets on your 1987-1995 Jeep Wrangler YJ. The towers come as...
Building high quality fabricated products for offroad vehicles is the mission. The Motobilt Jeep YJ Four Link Suspension Kit consists of an assembly that mounts ot the frame and houses both the upper and lower links for the front and rear 4 link suspension. This kit was designed to make...
The Motobilt Flat Bottom 4 Link Tab is CAD designed and CNC laser cut from high strength steel 3/8 inch plate. The tab can be used to mount a number of different suspension links. This tab features a 9/16 inch hole. We commonly use this tab in combination with axle trusses....
The Motobilt rear fender top mounted coil over mounts are integrated into the CJ/YJ rear fender tops. The mounts allow you to run a rear coilover that will tie into the fender tops and the roll cage. These mounts come with the roll cage upper mounting plate so that you...
The Motobilt Coilover Shock Hoops are made of HD 1.75 inch .120wall DOM Tubing. They are the perfect way to mount coilovers, air shocks, etc. This kit is designed to be used with the Motobilt Coilover Shock Hoop Brace (#MB1557) but can be used separately.  Its larger opening also works...
This innovative Motobilt Builder Kit has numerous benefits for the DIY'er at home or for the professional vehicle builder. Front upper shock towers are needed when converting a vehicle from factory springs & traditional shocks to longer full coil-over shocks. Anyone can fabricate a simple tube to brace between the...
The Motobilt adjustable track bar bracket is built to take the any abuse you can dish out. This bracket is laser cut from 1/4 inch thick steel plate and CNC formed. The bracket consists of 3 pieces that will need to be welded for install. The brackets utilize 3 different...
The Motobilt JK Cam Delete Plates allow you to eliminate the slotted factory holes that use a cam bolt.  If your running aftermarket adjustable arms you do not need cam bolts and you can eliminate the weak slots.  These plates come in a set of 4 which allows you to...
The Motobilt coilover shock hoop kit is made of HD 1.75 inch DOM Tubing. This kit is the perfect way to mount coilovers, air shocks, etc. Shock hoop kit HD 1.75 inch DOM Tubing Sold as kit Must select lower mount type ( Flat bottom , King pin dana 60 or...
Spinner