2007–2018 WRANGLER JK / JKU

JK & JKU bumpers. Find your fit.

Choose a front or rear bumper for your JK or JKU, then decide how far you want to take the installation. Compare frame-chop designs, winch layouts and light options before adding the matching skid.

Find your bumper

Front or rear. Your Jeep. Your next build.

Motobilt Tomahawk front bumper with bull bar and winch installed on a Jeep.
Built in the shop. Put to work on the trail.

Find your bumper

27 bumper options

25% OFF Tomahawk Frame Chop Front Bumper w/Bull Bar for Jeep JK, JL, JT

MB1149-BB

Tomahawk Frame Chop Front Bumper w/Bull Bar for Jeep JK, JL, JT

Regular price$889.00Sale price$666.75

Frame modification required

Frame cutting and drilling required. Forward body mounts require clearancing.

View details
Fitment & installation details

Vehicle fitment: JK · 2-door · 2007–2018; JKU · 4-door · 2007–2018; JL · 2-door · 2018+; JLU · 4-door · 2018+; JT Gladiator · 2020+

Frame cutting and drilling required. Forward body mounts require clearancing.
Not compatible with factory Rubicon electronic sway-bar disconnect. Some other factory sway bars need modification.
2012+ JK/JKU requires vacuum-pump relocation.
Winch mounting pattern alone does not guarantee body/solenoid clearance; check the product-specific exclusions.
JL/JLU/JT factory non-disconnecting sway bars may need modification; verify sway-bar requirements before ordering.
Not for Warn M8274, CTI or other offset winches; verify winch body clearance.

Model selection narrows the options. Confirm your year, trim, winch and installation requirements on the product page.

25% OFF Hatchet Frame Chop Rear Bumper and Cross member for Jeep JK / JKU

MB1081

Hatchet Frame Chop Rear Bumper and Cross member for Jeep JK / JKU

Regular price$749.00Sale price$561.75

Frame modification required

Rear frame/crossmember cutting and welding required.

View details
Fitment & installation details

Vehicle fitment: JK · 2-door · 2007–2018; JKU · 4-door · 2007–2018

Rear frame/crossmember cutting and welding required.
Factory receiver hitch cannot be retained.

Model selection narrows the options. Confirm your year, trim, winch and installation requirements on the product page.

25% OFF Tomahawk Frame Chop Front Bumper for Jeep JK, JL, JT

MB1149

Tomahawk Frame Chop Front Bumper for Jeep JK, JL, JT

Regular price$779.00Sale price$584.25

Frame modification required

Frame cutting and drilling required. Forward body mounts require clearancing.

View details
Fitment & installation details

Vehicle fitment: JK · 2-door · 2007–2018; JKU · 4-door · 2007–2018; JL · 2-door · 2018+; JLU · 4-door · 2018+; JT Gladiator · 2020+

Frame cutting and drilling required. Forward body mounts require clearancing.
Not compatible with factory Rubicon electronic sway-bar disconnect. Some other factory sway bars need modification.
2012+ JK/JKU requires vacuum-pump relocation.
Winch mounting pattern alone does not guarantee body/solenoid clearance; check the product-specific exclusions.
JL/JLU/JT factory non-disconnecting sway bars may need modification; verify sway-bar requirements before ordering.
Not for Warn M8274, CTI or other offset winches; verify winch body clearance.

Model selection narrows the options. Confirm your year, trim, winch and installation requirements on the product page.

25% OFF Stubby Rear Bumper for Jeep JK / JKU

MB1010

Stubby Rear Bumper for Jeep JK / JKU

Regular price$629.00Sale price$471.75

Check installation details

Bolt-on rear bumper; factory hitch is supported.

View details
Fitment & installation details

Vehicle fitment: JK · 2-door · 2007–2018; JKU · 4-door · 2007–2018

Bolt-on rear bumper; factory hitch is supported.

Model selection narrows the options. Confirm your year, trim, winch and installation requirements on the product page.

25% OFF Crusher Rear Bumper w/ Light Mounts for Jeep JK / JKU

MB1072

Crusher Rear Bumper w/ Light Mounts for Jeep JK / JKU

Regular price$799.00Sale price$599.25

Check installation details

Factory hitch is supported; includes spare-tire cutout.

View details
Fitment & installation details

Vehicle fitment: JK · 2-door · 2007–2018; JKU · 4-door · 2007–2018

Factory hitch is supported; includes spare-tire cutout.
3 x 3-inch stud-mounted cube lights; not flush-mount lights.

Model selection narrows the options. Confirm your year, trim, winch and installation requirements on the product page.

25% OFF Gladius Frame Chop Bumper with Bull Bar for Jeep JK/JL/JT

MB1248-B

Gladius Frame Chop Bumper with Bull Bar for Jeep JK/JL/JT

Regular price$1,099.00Sale price$824.25

Frame modification required

Frame cutting required.

View details
Fitment & installation details

Vehicle fitment: JK · 2-door · 2007–2018; JKU · 4-door · 2007–2018; JL · 2-door · 2018+; JLU · 4-door · 2018+; JT Gladiator · 2020+

Frame cutting required.
Not compatible with factory Rubicon electronic sway-bar disconnect.
2012+ JK/JKU requires vacuum-pump relocation.
Winch mounting pattern alone does not guarantee body/solenoid clearance; check the product-specific exclusions.
JL/JLU/JT factory non-disconnecting sway bars may need modification; verify sway-bar requirements before ordering.
Not for factory fog lights. Uses compatible aftermarket pods such as Baja Designs Squadron-R.

Model selection narrows the options. Confirm your year, trim, winch and installation requirements on the product page.

25% OFF Hatchet Series Front Frame Chop Bumper w/ Stinger and Fog Mounts for Jeep JK / JKU

MB1048F-S

Hatchet Series Front Frame Chop Bumper w/ Stinger and Fog Mounts for Jeep JK / JKU

Regular price$639.00Sale price$479.25

Frame modification required

Approximately 2 inches of front frame horns must be removed, plus the crash bar. Drilling required.

View details
Fitment & installation details

Vehicle fitment: JK · 2-door · 2007–2018; JKU · 4-door · 2007–2018

Approximately 2 inches of front frame horns must be removed, plus the crash bar. Drilling required.
Factory Rubicon sway-bar disconnect is supported.
MB1002 fairlead mount sold separately.
Winch mounting pattern alone does not guarantee body/solenoid clearance; check the product-specific exclusions.

Model selection narrows the options. Confirm your year, trim, winch and installation requirements on the product page.

25% OFF Hatchet Series Front Frame Chop Bumper w/Fog Mounts for Jeep JK / JKU

MB1048F

Hatchet Series Front Frame Chop Bumper w/Fog Mounts for Jeep JK / JKU

Regular price$499.00Sale price$374.25

Frame modification required

Approximately 2 inches of front frame horns must be removed, plus the crash bar. Drilling required.

View details
Fitment & installation details

Vehicle fitment: JK · 2-door · 2007–2018; JKU · 4-door · 2007–2018

Approximately 2 inches of front frame horns must be removed, plus the crash bar. Drilling required.
Factory Rubicon sway-bar disconnect is supported.
MB1002 fairlead mount sold separately.
Winch mounting pattern alone does not guarantee body/solenoid clearance; check the product-specific exclusions.

Model selection narrows the options. Confirm your year, trim, winch and installation requirements on the product page.

25% OFF Micro Series Rear Bumper for Jeep JK / JKU

MB1040

Micro Series Rear Bumper for Jeep JK / JKU

Regular price$269.00Sale price$201.75

Frame modification required

Approximately 1 inch of the rear frame horns must be trimmed.

View details
Fitment & installation details

Vehicle fitment: JK · 2-door · 2007–2018; JKU · 4-door · 2007–2018

Approximately 1 inch of the rear frame horns must be trimmed.
Factory hitch clearance; MB2072 D-ring mounts sold separately.

Model selection narrows the options. Confirm your year, trim, winch and installation requirements on the product page.

25% OFF Hatchet Series Front Frame Chop Bumper for Jeep JK / JKU

MB1048

Hatchet Series Front Frame Chop Bumper for Jeep JK / JKU

Regular price$439.00Sale price$329.25

Frame modification required

Approximately 2 inches of front frame horns must be removed, plus the crash bar. Drilling required.

View details
Fitment & installation details

Vehicle fitment: JK · 2-door · 2007–2018; JKU · 4-door · 2007–2018

Approximately 2 inches of front frame horns must be removed, plus the crash bar. Drilling required.
Factory Rubicon sway-bar disconnect is supported.
MB1002 fairlead mount sold separately.
Winch mounting pattern alone does not guarantee body/solenoid clearance; check the product-specific exclusions.

Model selection narrows the options. Confirm your year, trim, winch and installation requirements on the product page.

Tomahawk Black Label Frame Chop Bumper for Jeep JK, JKU, JL, JLU and JT

MB1149-BL

Tomahawk Black Label Frame Chop Bumper for Jeep JK, JKU, JL, JLU and JT

$1,549.00 Sold out

Frame modification required

Frame cutting and drilling required. Forward body mounts require clearancing.

View details
Fitment & installation details

Vehicle fitment: JK · 2-door · 2007–2018; JKU · 4-door · 2007–2018; JL · 2-door · 2018+; JLU · 4-door · 2018+; JT Gladiator · 2020+

Frame cutting and drilling required. Forward body mounts require clearancing.
Not compatible with factory Rubicon electronic sway-bar disconnect. Some other factory sway bars need modification.
2012+ JK/JKU requires vacuum-pump relocation.
Winch mounting pattern alone does not guarantee body/solenoid clearance; check the product-specific exclusions.
JL/JLU/JT factory non-disconnecting sway bars may need modification; verify sway-bar requirements before ordering.
Not for Warn M8274, CTI or other offset winches; verify winch body clearance.

Model selection narrows the options. Confirm your year, trim, winch and installation requirements on the product page.

25% OFF Crusher HD Front Bumper w/Tube Bull Bar for Jeep JK/JKU

MB1209-B

Crusher HD Front Bumper w/Tube Bull Bar for Jeep JK/JKU

Regular price$949.00Sale price$711.75

No frame chop

No frame-rail cutting.

View details
Fitment & installation details

Vehicle fitment: JK · 2-door · 2007–2018; JKU · 4-door · 2007–2018

No frame-rail cutting.
2012+ JK/JKU requires vacuum-pump relocation.
Factory sway bars, including Rubicon, and AntiRock supported.
Winch mounting pattern alone does not guarantee body/solenoid clearance; check the product-specific exclusions.
Not for factory fog lights. Uses compatible aftermarket pods such as Baja Designs Squadron-R.
Badlands Apex and offset winches such as Warn 9.5TI do not fit.
Factory frame holes may need opening to 5/8 inch.

Model selection narrows the options. Confirm your year, trim, winch and installation requirements on the product page.

Matching skid available

Complete this bumper with its matching skid. Sold separately.

25% OFFSkid Plate for Crusher HD Front Bumper for Jeep JK/JKU

MB1210 · Skid Plate for Crusher HD Front Bumper for Jeep JK/JKU

Regular price$209.00Sale price$156.75

View matching skid
25% OFF Crusher HD Front Bumper for Jeep JK/JKU

MB1209

Crusher HD Front Bumper for Jeep JK/JKU

Regular price$779.00Sale price$584.25

No frame chop

No frame-rail cutting.

View details
Fitment & installation details

Vehicle fitment: JK · 2-door · 2007–2018; JKU · 4-door · 2007–2018

No frame-rail cutting.
2012+ JK/JKU requires vacuum-pump relocation.
Factory sway bars, including Rubicon, and AntiRock supported.
Winch mounting pattern alone does not guarantee body/solenoid clearance; check the product-specific exclusions.
Not for factory fog lights. Uses compatible aftermarket pods such as Baja Designs Squadron-R.
Badlands Apex and offset winches such as Warn 9.5TI do not fit.
Factory frame holes may need opening to 5/8 inch.

Model selection narrows the options. Confirm your year, trim, winch and installation requirements on the product page.

Matching skid available

Complete this bumper with its matching skid. Sold separately.

25% OFFSkid Plate for Crusher HD Front Bumper for Jeep JK/JKU

MB1210 · Skid Plate for Crusher HD Front Bumper for Jeep JK/JKU

Regular price$209.00Sale price$156.75

View matching skid
25% OFF Hatchet Series Front Frame Chop Bumper w/Stinger for Jeep JK  / JKU

MB1048-S

Hatchet Series Front Frame Chop Bumper w/Stinger for Jeep JK / JKU

Regular price$579.00Sale price$434.25

Frame modification required

Approximately 2 inches of front frame horns must be removed, plus the crash bar. Drilling required.

View details
Fitment & installation details

Vehicle fitment: JK · 2-door · 2007–2018; JKU · 4-door · 2007–2018

Approximately 2 inches of front frame horns must be removed, plus the crash bar. Drilling required.
Factory Rubicon sway-bar disconnect is supported.
MB1002 fairlead mount sold separately.
Winch mounting pattern alone does not guarantee body/solenoid clearance; check the product-specific exclusions.

Model selection narrows the options. Confirm your year, trim, winch and installation requirements on the product page.

25% OFF Crusher Front Bumper for Jeep JK / JKU

MB1011

Crusher Front Bumper for Jeep JK / JKU

Regular price$749.00Sale price$561.75

Check installation details

Mounting holes may require drilling and outer edges of the crash bar require trimming.

View details
Fitment & installation details

Vehicle fitment: JK · 2-door · 2007–2018; JKU · 4-door · 2007–2018

Mounting holes may require drilling and outer edges of the crash bar require trimming.
2012+ JK/JKU requires vacuum-pump relocation and original bracket removal.
Not compatible with Teraflex S/T dual-rate sway bar.
Winch mounting pattern alone does not guarantee body/solenoid clearance; check the product-specific exclusions.
Not compatible with Superwinch EXP or offset winches; consult product notes.

Model selection narrows the options. Confirm your year, trim, winch and installation requirements on the product page.

Skid protection included

25% OFF Gladius Frame Chop Bumper for Jeep JK/JL/JT

MB1248

Gladius Frame Chop Bumper for Jeep JK/JL/JT

Regular price$979.00Sale price$734.25

Frame modification required

Frame cutting required.

View details
Fitment & installation details

Vehicle fitment: JK · 2-door · 2007–2018; JKU · 4-door · 2007–2018; JL · 2-door · 2018+; JLU · 4-door · 2018+; JT Gladiator · 2020+

Frame cutting required.
Not compatible with factory Rubicon electronic sway-bar disconnect.
2012+ JK/JKU requires vacuum-pump relocation.
Winch mounting pattern alone does not guarantee body/solenoid clearance; check the product-specific exclusions.
JL/JLU/JT factory non-disconnecting sway bars may need modification; verify sway-bar requirements before ordering.
Not for factory fog lights. Uses compatible aftermarket pods such as Baja Designs Squadron-R.

Model selection narrows the options. Confirm your year, trim, winch and installation requirements on the product page.

25% OFF Tomahawk Frame Chop Rear Bumper for JK/JKU

MB1260

Tomahawk Frame Chop Rear Bumper for JK/JKU

Regular price$1,049.00Sale price$786.75

Frame modification required

Factory frame portions must be removed and replacement rails welded in.

View details
Fitment & installation details

Vehicle fitment: JK · 2-door · 2007–2018; JKU · 4-door · 2007–2018

Factory frame portions must be removed and replacement rails welded in.

Model selection narrows the options. Confirm your year, trim, winch and installation requirements on the product page.

25% OFF Crusher Front Bumper w/ Stinger for Jeep JK / JKU

MB1011-S

Crusher Front Bumper w/ Stinger for Jeep JK / JKU

Regular price$889.00Sale price$666.75

Check installation details

Mounting holes may require drilling and outer edges of the crash bar require trimming.

View details
Fitment & installation details

Vehicle fitment: JK · 2-door · 2007–2018; JKU · 4-door · 2007–2018

Mounting holes may require drilling and outer edges of the crash bar require trimming.
2012+ JK/JKU requires vacuum-pump relocation and original bracket removal.
Not compatible with Teraflex S/T dual-rate sway bar.
Winch mounting pattern alone does not guarantee body/solenoid clearance; check the product-specific exclusions.
Not compatible with Superwinch EXP or offset winches; consult product notes.

Model selection narrows the options. Confirm your year, trim, winch and installation requirements on the product page.

Skid protection included

25% OFF Hammer Front Bumper w/stinger and fog lights for Jeep JK / JKU

MB1025F-S

Hammer Front Bumper w/stinger and fog lights for Jeep JK / JKU

Regular price$889.00Sale price$666.75

No frame chop

No frame-rail cutting; mounting holes require drilling.

View details
Fitment & installation details

Vehicle fitment: JK · 2-door · 2007–2018; JKU · 4-door · 2007–2018

No frame-rail cutting; mounting holes require drilling.
2012+ JK/JKU requires vacuum-pump relocation and removal of the original pump bracket.
Optional MB1036 skid requires trimming each side of the crash bar by approximately 1 inch.
Winch mounting pattern alone does not guarantee body/solenoid clearance; check the product-specific exclusions.

Model selection narrows the options. Confirm your year, trim, winch and installation requirements on the product page.

Matching skid available

Complete this bumper with its matching skid. Sold separately.

25% OFFHammer Front Bumper Skid Plate for Jeep JK / JKU

MB1036 · Hammer Front Bumper Skid Plate for Jeep JK / JKU

Regular price$209.00Sale price$156.75

View matching skid
25% OFF Hammer Front Bumper W/Fog Mount for Jeep JK / JKU

MB1025F

Hammer Front Bumper W/Fog Mount for Jeep JK / JKU

Regular price$739.00Sale price$554.25

No frame chop

No frame-rail cutting; mounting holes require drilling.

View details
Fitment & installation details

Vehicle fitment: JK · 2-door · 2007–2018; JKU · 4-door · 2007–2018

No frame-rail cutting; mounting holes require drilling.
2012+ JK/JKU requires vacuum-pump relocation and removal of the original pump bracket.
Optional MB1036 skid requires trimming each side of the crash bar by approximately 1 inch.
Winch mounting pattern alone does not guarantee body/solenoid clearance; check the product-specific exclusions.

Model selection narrows the options. Confirm your year, trim, winch and installation requirements on the product page.

Matching skid available

Complete this bumper with its matching skid. Sold separately.

25% OFFHammer Front Bumper Skid Plate for Jeep JK / JKU

MB1036 · Hammer Front Bumper Skid Plate for Jeep JK / JKU

Regular price$209.00Sale price$156.75

View matching skid
25% OFF Crusher Front Bumper w/ Grill Hoop and Stinger for Jeep JK / JKU

MB1011-L

Crusher Front Bumper w/ Grill Hoop and Stinger for Jeep JK / JKU

Regular price$1,129.00Sale price$846.75

Check installation details

Mounting holes may require drilling and outer edges of the crash bar require trimming.

View details
Fitment & installation details

Vehicle fitment: JK · 2-door · 2007–2018; JKU · 4-door · 2007–2018

Mounting holes may require drilling and outer edges of the crash bar require trimming.
2012+ JK/JKU requires vacuum-pump relocation and original bracket removal.
Not compatible with Teraflex S/T dual-rate sway bar.
Winch mounting pattern alone does not guarantee body/solenoid clearance; check the product-specific exclusions.
Not compatible with Superwinch EXP or offset winches; consult product notes.

Model selection narrows the options. Confirm your year, trim, winch and installation requirements on the product page.

Skid protection included

25% OFF Gladius Frame Chop Bumper with Bull Bar for Jeep JK/JL/JT - fits WARN M8274

MB1238-B

Gladius Frame Chop Bumper with Bull Bar for Jeep JK/JL/JT - fits WARN M8274

Regular price$1,099.00Sale price$824.25

Frame modification required

Frame cutting required.

View details
Fitment & installation details

Vehicle fitment: JK · 2-door · 2007–2018; JKU · 4-door · 2007–2018; JL · 2-door · 2018+; JLU · 4-door · 2018+; JT Gladiator · 2020+

Frame cutting required.
Not compatible with factory Rubicon electronic sway-bar disconnect.
JL/JLU/JT factory non-disconnecting sway bars may need modification; verify sway-bar requirements before ordering.
Not for factory fog lights. Uses compatible aftermarket pods such as Baja Designs Squadron-R.

Model selection narrows the options. Confirm your year, trim, winch and installation requirements on the product page.

25% OFF Hammer Front Bumper w/Grill Hoop, Stinger & Fog Mounts for Jeep JK / JKU

MB1025F-L

Hammer Front Bumper w/Grill Hoop, Stinger & Fog Mounts for Jeep JK / JKU

Regular price$1,129.00Sale price$846.75

No frame chop

No frame-rail cutting; mounting holes require drilling.

View details
Fitment & installation details

Vehicle fitment: JK · 2-door · 2007–2018; JKU · 4-door · 2007–2018

No frame-rail cutting; mounting holes require drilling.
2012+ JK/JKU requires vacuum-pump relocation and removal of the original pump bracket.
Optional MB1036 skid requires trimming each side of the crash bar by approximately 1 inch.
Winch mounting pattern alone does not guarantee body/solenoid clearance; check the product-specific exclusions.

Model selection narrows the options. Confirm your year, trim, winch and installation requirements on the product page.

Matching skid available

Complete this bumper with its matching skid. Sold separately.

25% OFFHammer Front Bumper Skid Plate for Jeep JK / JKU

MB1036 · Hammer Front Bumper Skid Plate for Jeep JK / JKU

Regular price$209.00Sale price$156.75

View matching skid
25% OFF Hammer Front Bumper No Fog Mount For Jeep JK / JKU

MB1025

Hammer Front Bumper No Fog Mount For Jeep JK / JKU

Regular price$519.00Sale price$389.25

No frame chop

No frame-rail cutting; mounting holes require drilling.

View details
Fitment & installation details

Vehicle fitment: JK · 2-door · 2007–2018; JKU · 4-door · 2007–2018

No frame-rail cutting; mounting holes require drilling.
2012+ JK/JKU requires vacuum-pump relocation and removal of the original pump bracket.
Optional MB1036 skid requires trimming each side of the crash bar by approximately 1 inch.
Winch mounting pattern alone does not guarantee body/solenoid clearance; check the product-specific exclusions.

Model selection narrows the options. Confirm your year, trim, winch and installation requirements on the product page.

Matching skid available

Complete this bumper with its matching skid. Sold separately.

25% OFFHammer Front Bumper Skid Plate for Jeep JK / JKU

MB1036 · Hammer Front Bumper Skid Plate for Jeep JK / JKU

Regular price$209.00Sale price$156.75

View matching skid
25% OFF Micro Series Rear Bumper w/ Light Mount for Jeep JK / JKU

MB1039

Micro Series Rear Bumper w/ Light Mount for Jeep JK / JKU

On Sale FromRegular price$309.00Sale price$231.75

Check installation details

Published description requires minimal trimming but does not clearly identify the trimming scope.

View details
Fitment & installation details

Vehicle fitment: JK · 2-door · 2007–2018; JKU · 4-door · 2007–2018

Published description requires minimal trimming but does not clearly identify the trimming scope.
20-inch single-row light-bar opening; verify 21.5-inch mounting width and selected bracket variant.
MB2072 D-ring mounts sold separately.

Model selection narrows the options. Confirm your year, trim, winch and installation requirements on the product page.

25% OFF Crusher HD Front Bumper for Jeep JK/JKU with Bull bar and Skidplate

MB1209-MB1210-MB1203

Crusher HD Front Bumper for Jeep JK/JKU with Bull bar and Skidplate

Regular price$1,309.00Sale price$981.75

No frame chop

No frame-rail cutting.

View details
Fitment & installation details

Vehicle fitment: JK · 2-door · 2007–2018; JKU · 4-door · 2007–2018

No frame-rail cutting.
2012+ JK/JKU requires vacuum-pump relocation.
Factory sway bars, including Rubicon, and AntiRock supported.
Winch mounting pattern alone does not guarantee body/solenoid clearance; check the product-specific exclusions.
Description has a contradictory JL/JT introduction; SKU, title and Fits JK feature identify this as the JK/JKU bundle.
Not for factory fog lights. Uses compatible aftermarket pods such as Baja Designs Squadron-R.
Badlands Apex and offset winches such as Warn 9.5TI do not fit.
Factory frame holes may need opening to 5/8 inch.

Model selection narrows the options. Confirm your year, trim, winch and installation requirements on the product page.

Skid protection included

25% OFF Gladius Frame Chop Bumper for JK/JL/JT - fits WARN M8274

MB1238

Gladius Frame Chop Bumper for JK/JL/JT - fits WARN M8274

Regular price$979.00Sale price$734.25

Frame modification required

Frame cutting required.

View details
Fitment & installation details

Vehicle fitment: JK · 2-door · 2007–2018; JKU · 4-door · 2007–2018; JL · 2-door · 2018+; JLU · 4-door · 2018+; JT Gladiator · 2020+

Frame cutting required.
Not compatible with factory Rubicon electronic sway-bar disconnect.
JL/JLU/JT factory non-disconnecting sway bars may need modification; verify sway-bar requirements before ordering.
Not for factory fog lights. Uses compatible aftermarket pods such as Baja Designs Squadron-R.

Model selection narrows the options. Confirm your year, trim, winch and installation requirements on the product page.

Not sure about frame chop?

Talk through your Jeep, winch and build plans with our crew.

334-219-2333
Already have your bumper? Shop accessories

Skid plates, mounts and components sold separately. Check compatibility with your bumper before ordering.

Compare your bumpers

Jeep JK and JKU bumper questions

What does frame chop mean on a JK or JKU bumper?

It means permanently cutting the frame for the bumper installation. Hatchet, Tomahawk and Gladius front designs have model-specific cutting requirements. A no-frame-chop bumper can still require drilling, bracket removal or other preparation. Read the exact instructions before committing to a design.

Can I keep the Rubicon electronic sway-bar disconnect?

It depends on the bumper. The JK Crusher HD and Hatchet front bumpers list factory Rubicon sway-bar compatibility. Tomahawk and Gladius frame-chop front bumpers do not work with the Rubicon electronic disconnect. Confirm your sway-bar setup on the selected product page.

Will my winch and factory fog lights fit?

Match both separately. The MB1238 Gladius is specifically for a WARN M8274, while MB1248 uses a standard 10 × 4.5-inch winch mounting pattern. Crusher HD and Gladius use Baja Designs Squadron-R light provisions, not factory fog lights. Factory-fog versions are available in other bumper families; check the exact part.

Is a front skid plate included with the bumper?

Not always. The MB1210 skid is an add-on for the JK/JKU Crusher HD, and MB1036 is the Hammer-series skid. Choose the bumper first, then select the matching skid or a package that specifically lists it as included. Skids are accessories, not complete bumpers.

What extra work should I expect on a 2012–2018 JK?

Several front bumpers require vacuum-pump relocation on 2012–2018 JK/JKU models. The MB2060 relocation bracket is listed for the Crusher HD and other applications; frame-chop designs have additional cutting and drilling requirements. Check the instructions for your exact bumper and model year.

Can I keep a receiver hitch with the Hatchet rear frame-chop bumper?

No. The MB1081 Hatchet rear bumper does not work with a receiver hitch. It requires cutting the rear frame rails, removing the factory crossmember and welding in the supplied crossmember. Choose another rear design if retaining a receiver is part of your plan.

Need help matching your bumper?

Tell our crew your Jeep year and model, winch and sway-bar setup, and what you want to keep or change.

Ask Motobilt