- Shop By Axle
- Axle Conversion Kits
- Axle Trusses
- Diff Covers
- Disk Brake Parts
- Back & Front Half Kits
- Builder Parts
The Motobilt Jeep JK Front Stubby Bumper with fog mounts is perfect for those who want a tight fitting bumper for added clearance. The Motobilt Jeep JK Front Stubby Bumper is a sleek tight fitting design. Our JK Stubby Bumper was 3D CAD designed to ensure the best possible fit to your Jeep JK. The bumper will fit all model years of the Jeep JK 2 door and 4 door JK Unlimited. Great care was taken to hide the bolts on the front of the bumper for a clean look after installation. The front d-ring mounts are CNC cut from 3/4 inch thick steel plate and pass through the bumper where they weld to the bumper mounting plates in addition to the bumper body. This was done for added strength to the recovery point.
The bumper also features two additional mounting plates that bolt to the side of the frame rails and bolt to the top side of the bumper for added strength. The main construction of the bumper is fabricated from 3/16 inch thick high strength steel plate. The bumper also serves as a winch mount. The top side of the JK Stubby Bumper has bolt holes for a recovery winch.
- Jeep JK Front Stubby bumper
- Fits all model years of the Jeep JK 2 door and 4 door JK Unlimited
- Fabricated from 3/16 inch thick high strength steel plate
- D-ring mounts are CNC cut from 3/4 inch thick steel plate and pass through the bumper where they weld to the bumper mounting plates
- Includes mounts for facotry fog lights
- Sold as each
- If installing a winch, MB1002 fairlead mount will also need to purchased
- This bumper is a bolt on design and does not require cutting the frame rails on your Jeep JK.
- The bumper will require two holes to be drilled out slightly. The two outside top bolt holes on your frame need to be drilled out to 9/16 inch
- Ships raw steel. You will need to paint or powdercoat the bumper to the color of your choice
- 2012 and newer models will need a vacuum relocation pump bracket PN MB2060. The factory bracket will need to be cut off to clear the additional mounting plates.
- 13.5 inch double row LED light bar available