MB1006-L

Front Stubby Bumper w/ Grill Hoop / Stinger for Jeep JK / JKU

$899.00
Shipping calculated at checkout.

This is the Motobilt JK front bumper loaded with the extras including the grill hoop, stinger, connectors and bumper. The loaded out Motobilt front JK bumper is by far our best selling JK bumper. It fits both the JK and JK Unlimited. The bumper uses Motobilt part number MB1006 and we load it out complete with everything you will need including the stinger, grill hoop, connectors, and and of course the bumper. The tube work is fabricated from 1.75 inch x .120 inch DOM round tubing. The bumper is fabricated using 3/16 inch thick high strength steel plate.

The bumper was designed using the latest in 3D CAD technology and CNC cut for precision. Installation is easy. The holes in the end of the frame need to be drilled out to 5/8 inch and the rest just bolts on. If using a WARN ZEON Winch you will need a 3/16 inch steel spacer under the fairlead mount. The bumper is shipped bare metal. it is up to you to choose paint or powdercoat and apply it to the color of your choice.

Specifications

  • Jeep JK Stubby front bumper with grill hoop and stinger
  • Fits both the JK and JK Unlimited
  • Winch: Our winch bumper is designed to fit a standard mounting pattern of 10" x 4.5" and has been tested with the Warn VR EVO and Zeon series winches. It may also fit other untested winches.
  • Tube work is fabricated from 1.75-inch x .120-inch DOM round tubing.
  • Bolt-On Design-2012+ see notes below.
  • Bumper is fabricated using 3/16-inch-thick high strength steel plate.
  • Proudly Made in the USA: Crafted with precision and pride in the United States, ensuring the highest quality and supporting American manufacturing.
  • Sold as kit.
  • Weight = 83lbs

Fits:

  • Jeep Wrangler JK / JKU 2007-2018

Note:

  • If installing a winch, MB1002 fairlead mount will also need to purchased
  • If using a WARN ZEON Winch you will need a 3/16 inch steel spacer under the fairlead mount
  • Ships raw steel. Must be painted or powder coated to prevent rust.  See (Steel-It)
  • This bumper uses Motobilt PN MB1006 and we load it out complete with everything you will need including the stinger, grill hoop, connectors and bumper
  • On the 2012 and newer JK models you will be required to relocate the vacuum pump for all of the brackets to properly connect.  The factory bracket will need to be cut off to clear the additional mounting plates.

Product Components