No products in the cart.
Front Axle Shifter Block off plate for Jeep YJ Dana 30 Front Axle
Product Code MB4018
Have a question?
The Motobilt Jeep YJ Dana 30 front axle block off plate is used when converting your YJ disconnect front axle to a solid one piece axle. The YJ disconnect front axle is notorious for not engaging the front axle and leaving you with only 2wd. A Jeep TJ front one piece front axle is installed to eliminate the 2 piece design that relies on a shift fork that is vacuum actuated. Once the axle shaft from a TJ is installed you will remove the factory shift fork mechanism.
- Jeep YJ Dana 30 front axle block off plate
- Designed to block off the hole that is left from removing the shifter fork mechanism
- CNC laser cut from 3/16 inch steel plate
- This is a terrific and in expensive way to solve the problematic disconnect system
- Hardware is Not included
- Sold as each
Note:
- Be sure to use some RTV silicone on the mating surface to prevent any leaks
- Once the axle shaft from a TJ is installed you will remove the factory shift fork mechanism
$99.00
The Motobilt Dana 44 steel diff cover has many features that separate it from others. The Dana 44 steel diff cover features a 3/8 inch thick steel ring that will keep the cover from pulling away from the housing when dragging over rocks. The Dana 44 steel diff cover also...
$15.00
This handy drilling guide is used to mark the hole centers when converting the wheel stub bolt pattern on a Ford Super Duty front axle wheel hubs from 8 bolt on 170mm to 8 bolt on 6.5” bolt circle diameter. Simply place the drilling guide over the stock wheel studs,...
The Motobilt Jeep JL Rubicon rear M220 heavy duty steel diff cover has many features that separate it from others. Our diff cover features a 3/8 inch thick steel ring that will keep the cover from pulling away from the housing when dragging over rocks. The Jeep JL rear MB220 Dana 44...
$109.00
The Motobilt Dana 60 Ford Super Duty diff cover is a heavy duty high clearance design. The diff cover ring is made out of 3/8 inch thick steel plate that is laser cut in house at Motobilt. Next a 1/4 inch thick laser cut plate is cnc formed and welded...
$109.00
The Motobilt 13 bolt diff cover allows for an extra 1.25 inch of ground clearance on your GM 14 bolt rear axle. This is often referred to as a shaved cover as you cut/shave 1.25 inch off of the bottom of the axle. The ring of this cover is laser...
The Motobilt Jeep JL Rubicon Front M210 Dana 44 heavy duty steel diff cover has many features that separate it from others. Our diff cover features a 3/8 inch thick steel ring that will keep the cover from pulling away from the housing when dragging over rocks. The Jeep JL...
$109.00
The Motobilt Ford Sterling 10.25 /10.5 HD steel diff cover has many features that separate it from others. The Sterling 10.25/10.5 HD steel diff cover features a 3/8 inch thick steel ring that will keep the cover from pulling away from the housing when dragging over rocks. The Sterling 10.25...
$109.00
The Motobilt Dana 60/70 HD steel diff cover has many features that separate it from others. The Dana 60 / 70 HD steel diff cover features a 3/8 inch thick laser cut steel ring that will keep the cover from pulling away from the housing when dragging over rocks. The...
$99.00
The Motobilt Dana 30 HD steel diff cover has many features that separate it from others. The Dana 30 HD steel diff cover features a 3/8" thick steel ring that will keep the cover from pulling away from the housing when dragging over rocks. The Dana 30 HD steel diff...
$109.00
The Motobilt 14 Bolt Diff Cover was designed with function in mind. The cover is made from high strength steel plate and full welded. The Motobilt GM 14 bolt full float heavy duty steel diff cover has many features that separate it from others. The GM 14 bolt full float...
The Motobilt GM 14 bolt full float rear disc brake brackets are a bolt on design. The Motobilt MB4022 disc brake brackets are a bolt on design for the GM Full Float rear axle. The brackets are CNC laser out out of 3/8" thick steel plate. Brackets have multiple holes...
$99.00
The Motobilt Ford 8.8 heavy duty steel diff cover has many features that separate it from others. The Ford 8.8 HD steel diff cover features a 3/8 inch thick steel ring that will keep the cover from pulling away from the housing when dragging over rocks. The Ford 8.8 HD...
The Motobilt Jeep YJ full width axle conversion kit is a simple way to install a Chevy Dana 44 or Dana 60 front axle in your Jeep YJ. This kit also works with older model Ford 44 and 60 fronts from the 78/79 range. This kit fits Jeep YJ's from...
The Motobilt Jeep JL front M186 heavy duty steel diff cover has many features that separate it from others. Our diff cover features a 3/8 inch thick steel ring that will keep the cover from pulling away from the housing when dragging over rocks. The Jeep JL Sport front HD steel diff cover also...
The Motobilt Ford Super Duty Dana 60 lower control arm mounts are just the ticket for that custom suspension setup. This heavy duty 1/4 inch steel brackets are laser cut and cnc formed at the Motobilt headquarters. The will allow you to mount a rod end, flex joint, or other...
The Motobilt Ford Super Duty Dana 60 axle truss is laser cut and bent out of 3/8 inch high strength steel for the main structure. This kit was designed specifically for the 2005 and up Ford F-250 and F350 Dana 60 front axles. The truss spans the length of the...
Coilover mounting tab for Dana 60 front kingpin style axle housings. Mounting coilover shocks to a Dana 60 front kingpin style axle has a couple challenges and the Motobilt MB2006 tab answers them. The tab is contoured on the bottom edge (weld surface) to follow the axle tube and contour...
$9.99
The Motobilt Bump Stop Pad is designed for 3” axel tubes. The bump stop pad can easily be modified with slight grinding to fit larger diameter axle tubes if the DIY fabricator or professional installer needs to fit it. The bump stop pads are laser cut and CNC formed in...
$299.00
Motobilt 14 Bolt Axle Truss Trail Version is a heavy duty truss for those wanting to mount suspension links to the top of the housing and eliminate the chance of spinning axle tubes in the center section. The 14 Bolt Axle has become a go to axle for rock crawlers...
At Motobilt, our heritage began with Builder Parts. This kit evolved over 2 years of development & shows our attention to all of the little details, even in a Builder Kit.The Motobilt High Steering Brackets for Super Duty 60 Axles is a premium Builder kit that solves the issue of...
Products You Have Viewed