Stubby Front Bumper w/Stinger and Fog Light Mounts for Jeep JK /JKU

The Motobilt Jeep JK Front Stubby Bumper with stinger and fog light mounts is perfect for those who want a tight fitting bumper for added clearance while retaining fog lights. The Motobilt Jeep JK Front Stubby Bumper is a sleek tight fitting design. Our JK Stubby Bumper was 3D CAD designed to ensure the best possible fit to your Jeep JK. The bumper will fit all model years of the Jeep JK 2 door and 4 door JK Unlimited. Great care was taken to hide the bolts on the front of the bumper for a clean look after installation. The front d-ring mounts are CNC cut from 3/4 inch thick steel plate and pass through the bumper where they weld to the bumper mounting plates in addition to the bumper body. This was done for added strength to the recovery point.

The bumper also features two additional mounting plates that bolt to the side of the frame rails and bolt to the top side of the bumper for added strength. The main construction of the bumper is fabricated from 3/16 inch thick high strength steel plate. The bumper also serves as a winch mount. The top side of the JK Stubby Bumper has bolt holes for a recovery winch.

Features:

• Jeep JK Front Stubby bumper w/Stinger and fog light mounts
• Fits all model years of the Jeep JK 2 door and 4 door JK Unlimited
• Winch: Our winch bumper is designed to fit a standard mounting pattern of 10" x 4.5" and has been tested with the Warn VR EVO and Zeon series winches. It may also fit other untested winches.
• Fabricated from 3/16 inch thick high strength steel plate
• Bolt on design. 2012+ See notes below.
• D-ring mounts are CNC cut from 3/4-inch-thick steel plate and pass through the bumper where they weld to the bumper mounting plates.
• Fog Light holes for factory fog lights.
  
• Pre-installed riv nuts for 10-24 screws in the factory bolt pattern.
• Proudly Made in the USA: Crafted with precision and pride in the United States, ensuring the highest quality and supporting American manufacturing.
• Sold as each.
• Weight: 60lbs (approx.)

Fits:

• Jeep Wrangler JK / JKU 2007-2018

Note:

• If installing a winch, MB1002 fairlead mount will also need to purchased
• This bumper is a bolt on design.
• The bumper will require two holes to be drilled out slightly.
• Ships raw steel. Must be painted or powder coated to prevent rust.  See (Steel-It)
• 2012 and newer models will need a vacuum relocation pump bracket PN MB2060.  The factory bracket will need to be cut off to clear the additional mounting plates.