Compatible With:
JLJT
Installing aftermarket front bucket seats in a Jeep JL or JLU is not as simple as bolting them in. The factory seat mounts are designed for OEM seats with integrated electronics and specific mounting patterns that do not match most aftermarket options.
This leaves builders trying to adapt brackets, stack spacers, or fabricate mounts just to get seats installed correctly.
The Motobilt MB2152 front seat mount kit is designed to solve that problem.
This system allows you to install aftermarket bucket seats using a common 14 inch wide by 18 inch deep mounting pattern while still utilizing the factory mounting locations on the Jeep floor. The mounts were designed around PRP seats but will work with many aftermarket seats that share this pattern.
No two drivers are built the same, so adjustability is built into the system.
Each kit includes heavy duty spring-loaded seat sliders that provide 7 inches of forward and rearward travel. This allows you to properly position the seat for different drivers or driving styles.
The mounts also allow you to lower your seat up to 2 inches compared to the factory seat in its lowest position. This is especially useful for taller drivers or builds running cages where headroom becomes limited.
Included riser and recline adjustment plates raise the front of the seat approximately 2 inches and allow you to select from three fixed seating angles. This lets you fine tune seating position for comfort and control.
The lower brackets are designed to match the contours of the Jeep JL floor and bolt directly into the factory mounting locations using factory hardware. No drilling is required.
A built-in submarine belt mounting point is included for those running 5 point harnesses. This mounting point moves with the seat sliders, so the belt stays correctly positioned as the seat is adjusted.
All components are constructed from 3/16 inch high grade steel that is laser cut and CNC formed for consistent fit and strength.
This is the correct way to install aftermarket front bucket seats in a Jeep JL or JLU using factory mounting locations while adding adjustability and proper seat positioning.
If you are installing aftermarket front bucket seats, the factory mounting system will not match most aftermarket seat bolt patterns.
This kit is designed specifically for that conversion.
It allows you to:
Want To Know More?
Find all the information you need to get the right part for your rig.
Vehicle Fitment
Jeep Wrangler JL and JLU
Material
3/16 inch high grade steel
Seat Mounting Pattern
14" x 18"
Seat Adjustment
7 inches fore-aft travel
Seat Height Adjustment
Up to 2 inches lower than factory
Manufactured
Made in the USA
What do I need to install aftermarket front bucket seats in a Jeep JL?
You need a mounting system that adapts aftermarket seat bolt patterns to the factory floor. This kit provides that solution with built-in adjustability.
Can I lower my seat with this kit?
Yes. This kit allows you to mount your seat up to 2 inches lower than the factory seat in its lowest position. This is especially useful for taller drivers or vehicles with roll cages where additional headroom is needed
Will this work with factory seats?
No. This kit is designed for aftermarket bucket seats.
Do I need to drill into the floor?
No. The mounts bolt directly into factory seat mounting locations.
How much adjustment do the sliders provide?
The included sliders provide 7 inches of forward and rearward travel.
Can I run a 5 point harness with this kit?
Yes. A submarine belt mounting point is included and moves with the seat.
Motobilt offers industry leading, American-made off-road parts, focusing on quality and precision. Every product is built in-house, ensuring reliable performance for your adventures. Let us be your go-to source for industry leading, top-notch gear and support in your off-road journey.
Phone: 334-219-2333
Email: info@motobilt.com
© 2026 Motobilt, All rights reserved.
Your cart is currently empty.
Start Shopping
