We are working hard at Motobilt to continuously add to our product line. The following newly-added products complement our 4-Link Systems.
Dana 60 Lower Link Mount Kit for 4-Link System
The Motobilt lower axle link brackets are CNC cut out of thick 1/4" P&O steel plate to fit the Dana 60 axle housing tubes. They are offset to allow the rod end to achieve maximum articulation. They are made with a 3/4" bolt hole.
They can be used in other applications, but were designed to be used with the Motobilt Jeep YJ and TJ 4 link bracket system on the lower front links.
These are sold in pairs (enough to do one axle).
Motobilt Shock Towers for 2.0 Shocks
The Motobilt shock towers are CNC cut from 1/4" p&o steel plate. This kit is desinged to be used with coil over shocks in the 2.0 size. This is a cut-in frame design, meaning you would cut a notch into your frame to mount these.
This is done to give you the clearance needed to run large coil over shocks on a traditional frame such as a Jeep.
The towers require professional installation and welding.
Includes 2 shock towers and 4 tabs that are designed to ensure exact fit once fully welded.
Fox Remote Reservoir Coil Over Package for Motobilt 4-Link System
This package is set up for a Jeep YJ or TJ running the Motobilt 4 Link bracket system with the 4.0, 6 cylinder motor. It includes 4 Fox remote reservoir coil over shocks with the large 7/8" shafts.
The kit also includes 8 Eibach coil springs set up to run this suspension system.
If you are running traditional shock hoops/towers front and rear, then choose the first option for 14" shocks front and rear.
If you are running the Motobilt rear fender tops with integrated coil over mounts, then choose the 2nd option. This will provide you with 14" front shocks and 16" rear shocks.
GM 14 Bolt Lower Link Kit for 4-Link System
The Motobilt lower axle link brackets are CNC cut of 1/4" P&O steel plate to fit the GM 14 bolt axle housing tubes. They are offset to allow the rod end to achieve maximum articulation. They are made with a 3/4" bolt hole.
They can be used in other applications, but were designed to be used with the Motobilt Jeep YJ and TJ 4 link bracket system on the lower front links.
These are sold in pairs (enough to do one axle)
1.75" Shock Hoop Kit
The Motobilt shock hoop kit is made of HD 1.75" DOM Tubing. This kit is the perfect way to mount coil overs, air shocks, etc. The kit contains:
2 shock hoops
4 upper radius coil over tabs
4 lower coil over tabs.
We offer the 2 types of lower mounts.
The 1st is your standard setup with flat shock mounts that will weld to the top of your axle tube or truss.
The 2nd choice comes with specific mounts for a front king pin dana 60 axle.
The 3rd choice gives you the ability to mount these on a dana 44 front axle.
