No products in the cart.
Wet Sound Stealth 6 Sound Bar Mount
Product Code MB2069
BOGO 20% OFF
Have a question?
This universal mount for the Wet Sound Stealth 6 Sound Bar is CNC cut from 1/8 inch thick high strength steel. The universal sound bar mount measures 20.125 inch wide on the inside of the bracket. There are 2 slots 3/8 inch wide which allow adjustment from a minimum of 9.625 inch to a maximum of 18.25.This mounting bracket is a great solution to mount the Wet Sounds Sound Bar to side by sides, utv's, atv's, rock bouncers, rock crawlers, golf carts and more. The Wet Sounds Sound Bar is Not included with the mount. The mount ships bare metal. You will need to paint or powdercoat to the color of your choice.
Features:
- Universal mount for Wet Sound Stealth 6 Speaker bar
- Does NOT include the sound bar
- CNC cut from 1/8 inch thick high strength steel
- Mount measures 20.125 wide on the inside of the bracket
- 2 slots 3/8 inch wide
- Sold as each
Note:
- This mounting bracket is a great solution to mount the Wet Sounds Sound Bar to side by sides, utv's, atv's, rock bouncers, rock crawlers, golf carts and more
- Wet Sounds Sound Bar is Not included
- Ships bare steel
- You will need to paint or powder coat the color of your choice
The 4” Round LED tail lights are waterproof and multi-function, serving as brake lights, turn signals, running lights and backup lights. Durable with a long life span (potentially 50K hours of use) and bright, they increase the visibility of the vehicle they're mounted on. Easy installation with the included rubber grommets. ...
Factory Jeep JK or JKU tail lights are prone to trail damage due to the fact that they sit 3" out from the body. This kit allows you install flush mounted round tail lights within the factory tail light opening, with minimal modifications.This kit consists of a pair of steel...
$40.00
Now you can add a fairlead mount to winch bumpers that do not have them formed or welded into place. This bracket is easy to install. Simply remove the 4 bolts holding your winch in place. Lift the winch up and slide the bracket under. You may need longer bolts...
$99.00
The Motobilt Dana 44 steel diff cover has many features that separate it from others. The Dana 44 steel diff cover features a 3/8 inch thick steel ring that will keep the cover from pulling away from the housing when dragging over rocks. The Dana 44 steel diff cover also...
The Motobilt Jeep YJ TJ spare tire delete kit bolts in place of the factory spare tire mount. Also it reuses the factory hardware. The part is fabricated from 14 GA steel plate. Some people refer to this part as a tramp stamp. One of the main features of this...
$15.00
This handy drilling guide is used to mark the hole centers when converting the wheel stub bolt pattern on a Ford Super Duty front axle wheel hubs from 8 bolt on 170mm to 8 bolt on 6.5” bolt circle diameter. Simply place the drilling guide over the stock wheel studs,...
The Motobilt, Inc. Competition Stubby Front bumper is designed to fit both the Jeep YJ and TJ Wrangler. The bumper is a stubby design that stops at the edge of the frame rails. The front bumper has an integrated winch mount with mounting holes for both full size winches and...
$109.00
The Motobilt Dana 60 Ford Super Duty diff cover is a heavy duty high clearance design. The diff cover ring is made out of 3/8 inch thick steel plate that is laser cut in house at Motobilt. Next a 1/4 inch thick laser cut plate is cnc formed and welded...
The Motobilt Jeep JL Rubicon rear M220 heavy duty steel diff cover has many features that separate it from others. Our diff cover features a 3/8 inch thick steel ring that will keep the cover from pulling away from the housing when dragging over rocks. The Jeep JL rear MB220 Dana 44...
The Motobilt Jeep JK aluminum inner front fenders look amazing. The new inner fenders provide a great way to protect the engine compartment of your Jeep. They also are a great way to customize your ride. These fenders are laser cut and CNC formed in house for a precise fit....
$109.00
The Motobilt 13 bolt diff cover allows for an extra 1.25 inch of ground clearance on your GM 14 bolt rear axle. This is often referred to as a shaved cover as you cut/shave 1.25 inch off of the bottom of the axle. The ring of this cover is laser...
The Motobilt Jeep JL Rubicon Front M210 Dana 44 heavy duty steel diff cover has many features that separate it from others. Our diff cover features a 3/8 inch thick steel ring that will keep the cover from pulling away from the housing when dragging over rocks. The Jeep JL...
Motobilt offers a Jeep JK Vacuum Pump Relocation Bracket. When mounting an aftermarket bumper or winch on your Jeep JK or JK Unlimited it may be necessary to relocate the factory vacuum pump from the front cross - member. We have designed a bracket for the Jeep JK 2012-present that...
The Motobilt Jeep TJ/LJ fuel cell package was designed to mount in the bed of your Jeep TJ or LJ. It will use your factory Jeep TJ or LJ fuel pump and is made out of 1/8 inch aluminum that is TIG welded. Motobilt offers a solution for relocating the...
The Motobilt Jeep JK spare tire delete kit and tag mount bolts in place of the factory spare tire mount on both the 4 door and 2 door.The kit also reuses the factory hardware. The part is fabricated from 14 GA steel plate. Some people refer to this part as...
The Motobilt Jeep Wrangler YJ Wheelbase Stretch Kit is a great way to move your rear axle back roughly 6 inches. The Motobilt Jeep Wrangler Wheelbase Stretch Kit is designed to use Jeep XJ rear leaf springs on the rear of your Jeep YJ (1987-1995). Installing this kit moves the...
$649.00
Motobilt introduces the Jeep JL 2018 + spare tire carrier. This heavy duty tire carrier is a must have if you are running larger tires on your Jeep. The stock setup is not equipped to handle the extra weight of a larger tire and wheel setup. Our design takes all of...
$109.00
The Motobilt Ford Sterling 10.25 /10.5 HD steel diff cover has many features that separate it from others. The Sterling 10.25/10.5 HD steel diff cover features a 3/8 inch thick steel ring that will keep the cover from pulling away from the housing when dragging over rocks. The Sterling 10.25...
Getting error codes with your newly-installed LED bulbs? These 50W 6 Ohm LED Tail light resistors can solve the problem and as well help if you're having problems with bulbs flashing too fast and burnt-out bulb notifications. Sells as a pair - Two (2) resistors and four (4) wire clips....
The Motobilt Jeep Wrangler JL Crusher recessed winch bumper with bull bar will provide you the ultimate in protection and recovery. The bumper allows you to secure your winch down low in between the frame rails. The winch bolt pattern will accept multiple style winches up to a Warn Zeon. The...
Products You Have Viewed