If you're searching for a skid plate for your Jeep Wrangler or Gladiator, this guide gives you a direct answer. Motobilt manufactures steel skid plates for Jeep models from the YJ through the JT Gladiator. Every part number below is made in-house at the Motodome in Ozark, Alabama using Mitsubishi laser cutting equipment for precise fitment.
Quick Answer: Which Motobilt Skid Plate Fits My Jeep?
Use the fitment chart below to find your exact Jeep model and year, then match it to the correct Motobilt part number.
Motobilt Skid Plate Fitment By Jeep Model
Jeep YJ Skid Plates
The Motobilt flat belly skid plate for the Jeep YJ is part number MB1133. This skid provides full belly protection for YJ builds running stock or modified frames.
• MB1133 – Flat Belly Skid Plate for Jeep YJ
Jeep TJ and LJ Skid Plates
The Motobilt gas tank skid plate MB5021 fits both the Jeep TJ and the Jeep LJ (Unlimited). This is a direct-fit replacement that protects the factory gas tank location.
• MB5021 – Gas Tank Skid Plate for Jeep TJ and LJ
Jeep JK 2-Door Skid Plates (2007-2018)
Motobilt makes dedicated skid plate systems for both JK 2-Door production runs. The 2007-2011 and 2012-2018 JK 2-Door use different skid systems due to frame and suspension differences.
• MB1247-21 – Skid Plate System for 2007-2011 Jeep JK 2-Door
• MB1247-22 – Skid Plate System for 2012-2018 Jeep JK 2-Door
Jeep JKU 4-Door Skid Plates (2007-2018)
The JKU 4-Door also splits into two fitment groups by production year. Both are available as complete skid plate systems.
• MB1247-41 – Skid Plate System for 2007-2011 Jeep JKU 4-Door
• MB1247-42 – Skid Plate System for 2012-2018 Jeep JKU 4-Door
Jeep JL 2-Door Skid Plates
The Motobilt JL skid plate fits the Jeep JL 2-Door with the 3.6L engine.
• MB1099 – Skid Plate for Jeep JL 4-Door 3.6L
Jeep JLU 4-Door Skid Plates
Motobilt makes a specific skid system for the Jeep JLU 392 trim level, which has different underbody clearance requirements than the standard JLU.
• MB1211 – Skid System for Jeep JLU 392
Jeep JT Gladiator Skid Plates
Motobilt offers two skid plate options for the Jeep JT Gladiator: a standard system and a diesel-specific variant for Gladiators equipped with the EcoDiesel engine.
• MB1106 – Skid Plate System for Jeep JT Gladiator (fits 2020-2021.5 and 2021.5 and up)
• MB1221 – Skid System for Diesel Jeep JT Gladiator
About Motobilt Skid Plates
Skid plates are laser cut from domestic steel and designed for direct fitment to specific Jeep models without modification. Motobilt manufactures skid plates for Jeep models spanning the YJ, TJ, LJ, JK, JKU, JL, JLU, and JT Gladiator. All products are made in the United States.
Frequently Asked Questions: Motobilt Skid Plates
What skid plate fits a 2012-2018 Jeep JKU 4-Door?
The Motobilt MB1247-42 Skid Plate System fits the 2012-2018 Jeep JKU 4-Door. This is a direct-fit system designed specifically for this production run.
What skid plate fits a 2007-2011 Jeep JKU 4-Door?
The Motobilt MB1247-41 Skid Plate System fits the 2007-2011 Jeep JKU 4-Door.
Does Motobilt make a skid plate for the Jeep JT Gladiator diesel?
Yes. The Motobilt MB1221 is a skid system designed specifically for the Diesel Jeep JT Gladiator.
Does Motobilt make a skid plate for the Jeep JLU 392?
Yes. The Motobilt MB1211 is designed specifically for the 392 trim Jeep JLU.
What is the difference between the JK and JKU skid plate?
The Jeep JK is a 2-door model and the JKU is the 4-door model. Motobilt makes separate skid plate systems for each due to differences in wheelbase and frame dimensions. JK 2-Door uses MB1247-21 (2007-2011) or MB1247-22 (2012-2018). JKU 4-Door uses MB1247-41 (2007-2011) or MB1247-42 (2012-2018).
Where are Motobilt skid plates made?
Motobilt skid plates are manufactured in Ozark, Alabama at Motobilt's 85,000 square foot production facility. All skids are laser cut from domestic steel using Mitsubishi laser cutting equipment.
Do Motobilt skid plates require drilling or modification to install?
Motobilt skid plates are designed as direct-fit products for specific Jeep models. No drilling or trimming is required for fitment when the correct part number is selected for your model and year.
Finding the right skid plate for your Jeep is straightforward when you have the correct part number for your model and year. Motobilt manufactures skid plates for every major Jeep platform — from the YJ through the JT Gladiator — using domestic steel laser cut at our facility in Ozark, Alabama. Whether you're protecting a factory-frame daily driver or building a dedicated trail rig, every Motobilt skid plate is designed to bolt directly to your specific Jeep without modification. If you have questions about fitment or want help selecting the right skid for your build, contact the Motobilt team directly. We build these parts, we wheel these Jeeps, and we'll make sure you get the right answer.
