Product Description
Skid plates do their job by covering the parts underneath the vehicle, but that protection can create a new problem when it is time to service something behind them. A front driveshaft, fuel filter, drain plug, or other component can turn into a much bigger job when the entire skid plate has to come off just to gain access.
The Motobilt MB2223 Universal Access Door gives builders a clean way to add a removable service opening wherever it is needed. This is the same style of access plate used in many Motobilt skid plate systems, now available separately for custom fabrication projects.
One of the most useful applications is creating a front driveshaft access point in a custom skid plate. Instead of dropping the skid to reach driveshaft hardware, the access door can be positioned where you need it during fabrication. It can also be used to reach components such as the fuel filter on diesel Jeep applications or other service points that become difficult to access once armor, skid plates, or custom fabrication are installed.
Built from 3/16-inch A36 steel, the MB2223 is a universal component rather than a vehicle-specific part. That gives the builder control over where it goes and what it provides access to.
If you are building a custom belly skid, modifying existing armor, or simply need better service access through a fabricated panel, this access door provides a proven starting point without having to design the assembly from scratch.
Important Information
-
Universal design for custom fabrication applications
-
Commonly used to create front driveshaft access through skid plates
-
Can be used for fuel filter access on diesel Jeep applications
-
Useful for drain plugs, hardware, service points, and other hard-to-reach components
-
Same style of access plate used in many Motobilt skid plate systems
-
Available separately for custom skid plate and fabrication projects
-
Constructed from 3/16-inch A36 steel
-
Installation requires fabrication
-
Made in the USA
Product Specifications
Application
Universal
Part Number
MB2223
Material
A36 Steel
Thickness
3/16"
Dimensions
7" H x 7" W x 0.5" D
Weight
3.9 lbs
Related Motobilt Systems
Universal component based on the access plate design used in multiple Motobilt skid plate systems
Manufactured
Made in the USA
Installation Notes
The MB2223 is a universal fabrication component, so placement is determined by the builder and the component that needs to be accessed.
Determine the required service opening and test fit the access door before cutting the skid plate or fabricated panel.
When using the MB2223 for front driveshaft access, position the opening around the specific drivetrain and skid plate configuration of the vehicle. Custom drivetrain and suspension setups can change component location and required clearance.
For service items such as diesel fuel filters, verify that the opening provides enough room to perform the intended maintenance before final installation.
Frequently Asked Questions
What is the MB2223 Universal Access Door used for?
The MB2223 allows builders to add a removable service access point to a skid plate or other fabricated panel. Instead of removing an entire skid plate to reach a component, the access door can be opened to reach the area behind it.
Can I use this as a front driveshaft access door?
Yes. Front driveshaft access is one of the primary uses for the MB2223. It can be incorporated into a custom skid plate so driveshaft hardware can be reached without removing the entire skid.
Can this be used for access to a diesel Jeep fuel filter?
Yes. The universal design makes it useful for creating access to hard-to-reach components such as the fuel filter on diesel Jeep applications. Final placement is determined by the builder based on the vehicle and surrounding components.
Is the MB2223 vehicle specific?
No. The MB2223 is a universal fabrication component. It can be installed wherever the builder needs a removable access point and has sufficient room for the assembly.
Is this the same type of access door used in Motobilt skid plates?
Yes. The MB2223 uses the same style of access plate found in many Motobilt skid plate systems. It is offered separately so builders can incorporate the setup into custom skid plates and other fabrication projects.
