JEEP JK · 2-DOOR
JK 2-DOOR ROLL CAGES.
Choose the Motobilt MB3101 cage for a JK two-door build, then review rear-seat configuration options and bracket-only builder parts.
Motobilt roll cages are for off-road recreational use only. Not for racing, motorsports or highway use. Installation requires a qualified welder/fabricator.
Plan your build
Jeep JK 2-Door Roll Cage Kits & Parts FAQ
What vehicle is the MB3101 cage designed for?
The MB3101 product specifies Jeep Wrangler JK two-door models from 2007–2017. It is different from the JKU four-door cage. Check the exact year and model on the product page.
Can I retain rear-seat space?
The fastback configuration does not accommodate the rear seat. The separate MB3101-P rear-passenger add-on supplies five tubes for the alternate rear section. Select the configuration with your installer before assembly.
Is MB3032-2 a complete cage?
No. MB3032-2 is the roll cage bracket kit for a custom JK cage. Tubing is not included. It is a different purchase from the MB3101 cage kit.
Can I install this as a bolt-in replacement?
No. Fitting, welding and disassembly by a qualified professional welder/fabricator are required. Improper installation can result in serious injury or death. Review the mounting and installation instructions; do not assume frame tie-ins or other components are included.
Can Motobilt roll cages be used for racing, motorsports or highway driving?
No. Motobilt roll cages are exclusively for off-road recreational use. They are not designed, tested or rated for racing or motorsports and must not be used for competitive or high-speed activities. They are not certified or intended for on-road or highway use. Installation may render the vehicle non-compliant with federal, state or local requirements.
Does a roll cage guarantee occupant safety or preserve the factory safety systems?
No. A cage improves structural rigidity but does not guarantee occupant safety or survival in every rollover or impact. Cage installation may interfere with or disable airbags and crash sensors. The user assumes responsibility for these effects and the risks of using the vehicle.
What are the installation requirements and risks?
A qualified professional welder/fabricator is required. Improper installation can result in serious injury or death. Modification of factory panels may be necessary. Review the exact product instructions and its Important Safety & Liability Notice before installation.
Can I drill, notch or cut cage tubing for wiring or accessories?
No. Do not drill, notch or cut cage tubing to route wiring or mount accessories; this compromises its strength. If an opening is necessary, the product notice requires reinforcement with a welded-in bung or for the hole to be fully welded closed. Have a qualified professional welder/fabricator address this requirement; do not treat it as permission to leave an unreinforced opening.
What warranty and liability terms apply to Motobilt roll cages?
Motobilt roll cages are sold as-is, without express or implied warranties, including merchantability or fitness for a particular purpose. Motobilt assumes no liability for injury, death or property damage. The end user assumes the risks. Read the full Important Safety & Liability Notice on the cage product page before purchase or use.