Skid Plates & Cross Members

Skid Plates & Cross Members
Sliding over rocks the easy way involves having a Motobilt Skid Plate on your Jeep.  Rocks can puncture oil pans and damage transfer cases.  Upgrading the bottom side of a Jeep for abuse is a must for those venturing into extreme obstacles.

Skid Plates & Cross Members

This is the new 4 link assembly for the frame side on a Jeep TJ. Building high quality fabricated products for offroad vehicles is the mission. The Motobilt Jeep TJ / LJ Four Link Suspension Kit consists of an assembly that mounts onto the frame and houses both the upper...
IMPORTANT: On some Gladiator models, you will have to drill into the frame and crossmember in order to install the exhaust skid plate. Please see the image showing the holes you will need to drill if your Gladiator model does not already have them. Once these holes have been drilled, you...
Building high quality fabricated products for offroad vehicles is the mission. The Motobilt Jeep YJ Four Link Suspension Kit consists of an assembly that mounts ot the frame and houses both the upper and lower links for the front and rear 4 link suspension. This kit was designed to make...
The Motobilt GM 14 bolt heavy duty pinion guard is laser cut from 3/8 inch thick steel plate. Not only is the guard 3/8 inch thick but so is the ring that bolts to the pinion support also. The guard is cnc bent and welded by hand right here in...
The Motobilt rear Jeep CJ (1976-1986) cross member is a perfect solution for those wanting to replace a bent or rusted out factory rear cross member. Over the years we have seen many Jeep Wrangler CJ's needing a replacement for the rear cross member. Often times due to someone attaching...
The Motobilt rear Jeep TJ (1997-2006) cross member is the strongest available. We base this claim because we did not simply use thicker material we also added gusseting to the cross member. The original intent was in designing a cross member for a customer who wanted to run it as...
The Hammer Skid plate is an add-on option to The Hammer Jeep JK Front Bumper. Skid plate is laser cut from 3/16 inch P and O steel and formed on a press brake. To install the skid plate, you have to trim approx. 1 inch off each side of the...
The Motobilt Jeep JL Skid Plate System is the most well thought out system in the industry by providing more protection, easy install and flush underside.  We offer a complete 4 skid system where each part bolts together using recessed bolts and completely smooth keyed overlays. There are absolutely no drop down...
Ground clearance is king in many situations.  These days many people are trying to keep a low center of gravity by keeping the ride height as low as possible.  The downside to a low COG rig is, there is less ground clearance. One solution for your Jeep YJ is this...
It may be hard to tell what the Cross member tab is used for.  I will explain.  On the Motobilt MB1503 4 Link Skid Sytem we mounted the transmission to a tube cross member and not the steel skid plate.  We did this so the skid plate could be removed...
The Motobilt Transmission Cross Member for 2012-2017 Jeep JK is the solution to your weak factory cross member. The factory Jeep JK cross members are a known weak point as they will flex or bow up while ontop of an obstacle off road. The thin material can also dent quite...
The Motobilt Jeep JL Muffler Skid Plate is the perfect way to keep your Jeep's underside safe.   Specifications 3/16 in steel construction Adjustable up or down 1 in Bolt on install Weight = 30lbs Benefits: Steel construction for superior strength. Adjustable for after market exhausts. Complete muffler protection Included: Skid...
Spinner